msgid "ADSL"
msgstr ""
-msgid "AICCU (SIXXS)"
-msgstr ""
-
msgid "ANSI T1.413"
msgstr ""
msgid "ATU-C System Vendor ID"
msgstr ""
-msgid "AYIYA"
-msgstr ""
-
msgid "Access Concentrator"
msgstr "Concentrador d'accés"
msgid "Allowed IPs"
msgstr ""
-msgid ""
-"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
-"\">Tunneling Comparison</a> on SIXXS"
-msgstr ""
-
msgid "Always announce default router"
msgstr ""
msgid "Band"
msgstr ""
-msgid "Behind NAT"
-msgstr ""
-
msgid ""
"Below is the determined list of files to backup. It consists of changed "
"configuration files marked by opkg, essential base files and the user "
msgid "Connection Limit"
msgstr "Límit de connexió"
-msgid "Connection to server fails when TLS cannot be used"
-msgstr ""
-
msgid "Connections"
msgstr "Connexions"
msgid "Default is stateless + stateful"
msgstr ""
-msgid "Default route"
-msgstr ""
-
msgid "Default state"
msgstr "Estat per defecte"
msgid "Header Error Code Errors (HEC)"
msgstr ""
-msgid "Heartbeat"
-msgstr ""
-
msgid ""
"Here you can configure the basic aspects of your device like its hostname or "
"the timezone."
msgid "IPv6 address"
msgstr "Adreça IPv6"
-msgid "IPv6 address delegated to the local tunnel endpoint (optional)"
-msgstr ""
-
msgid "IPv6 assignment hint"
msgstr ""
msgid "NTP server candidates"
msgstr "Candidats de servidor NTP"
-msgid "NTP sync time-out"
-msgstr ""
-
msgid "Name"
msgstr "Nom"
msgid "Optional"
msgstr ""
-msgid "Optional, specify to override default server (tic.sixxs.net)"
-msgstr ""
-
-msgid "Optional, use when the SIXXS account has more than one tunnel"
-msgstr ""
-
msgid ""
"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
"starting with <code>0x</code>."
msgid "Request IPv6-prefix of length"
msgstr ""
-msgid "Require TLS"
-msgstr ""
-
msgid "Required"
msgstr ""
msgid "Route type"
msgstr ""
-msgid "Routed IPv6 prefix for downstream interfaces"
-msgstr ""
-
msgid "Router Advertisement-Service"
msgstr ""
msgid "SHA256"
msgstr ""
-msgid ""
-"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) "
-"use 6in4 instead"
-msgstr ""
-
-msgid "SIXXS-handle[/Tunnel-ID]"
-msgstr ""
-
msgid "SNR"
msgstr ""
msgid "Server Settings"
msgstr "Ajusts de servidor"
-msgid "Server password"
-msgstr ""
-
-msgid ""
-"Server password, enter the specific password of the tunnel when the username "
-"contains the tunnel ID"
-msgstr ""
-
-msgid "Server username"
-msgstr ""
-
msgid "Service Name"
msgstr "Nom de servei"
msgid "Source"
msgstr "Origen"
-msgid "Source routing"
-msgstr ""
-
msgid "Specifies the directory the device is attached to"
msgstr "Especifica el directori a que el dispositiu està adjuntat"
"connectar-te de nou a l'encaminador, depenent de la configuració que hi "
"tinguis."
-msgid ""
-"The tunnel end-point is behind NAT, defaults to disabled and only applies to "
-"AYIYA"
-msgstr ""
-
msgid ""
"The uploaded image file does not contain a supported format. Make sure that "
"you choose the generic image format for your platform."
msgid "Tunnel Link"
msgstr ""
-msgid "Tunnel broker protocol"
-msgstr ""
-
-msgid "Tunnel setup server"
-msgstr ""
-
-msgid "Tunnel type"
-msgstr ""
-
msgid "Tx-Power"
msgstr "Potència Tx"
msgid "Vendor Class to send when requesting DHCP"
msgstr "Classe de venidor per enviar al sol·licitar DHCP"
-msgid "Verbose"
-msgstr ""
-
-msgid "Verbose logging by aiccu daemon"
-msgstr ""
-
msgid "Verify"
msgstr "Verifica"
"La xifratge WPA requereix que sigui instal·lat el wpa_supplicant (pel mode "
"client) o el hostapd (pels modes AP i ad hoc)."
-msgid ""
-"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)"
-msgstr ""
-
msgid "Waiting for changes to be applied..."
msgstr "Esperant que s'apliquin els canvis..."
"communications"
msgstr ""
-msgid "Whether to create an IPv6 default route over the tunnel"
-msgstr ""
-
-msgid "Whether to route only packets from delegated prefixes"
-msgstr ""
-
msgid "Width"
msgstr ""
msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
msgstr "fitxer <abbr title=\"Domain Name System\">DNS</abbr> local"
-msgid "minimum 1280, maximum 1480"
-msgstr ""
-
msgid "minutes"
msgstr ""
msgid "ADSL"
msgstr ""
-msgid "AICCU (SIXXS)"
-msgstr ""
-
msgid "ANSI T1.413"
msgstr ""
msgid "ATU-C System Vendor ID"
msgstr ""
-msgid "AYIYA"
-msgstr ""
-
msgid "Access Concentrator"
msgstr "Přístupový koncentrátor"
msgid "Allowed IPs"
msgstr ""
-msgid ""
-"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
-"\">Tunneling Comparison</a> on SIXXS"
-msgstr ""
-
msgid "Always announce default router"
msgstr ""
msgid "Band"
msgstr ""
-msgid "Behind NAT"
-msgstr ""
-
msgid ""
"Below is the determined list of files to backup. It consists of changed "
"configuration files marked by opkg, essential base files and the user "
msgid "Connection Limit"
msgstr "Omezení počtu připojení"
-msgid "Connection to server fails when TLS cannot be used"
-msgstr ""
-
msgid "Connections"
msgstr "Připojení"
msgid "Default is stateless + stateful"
msgstr ""
-msgid "Default route"
-msgstr ""
-
msgid "Default state"
msgstr "Výchozí stav"
msgid "Header Error Code Errors (HEC)"
msgstr ""
-msgid "Heartbeat"
-msgstr ""
-
msgid ""
"Here you can configure the basic aspects of your device like its hostname or "
"the timezone."
msgid "IPv6 address"
msgstr "IPv6 adresa"
-msgid "IPv6 address delegated to the local tunnel endpoint (optional)"
-msgstr ""
-
msgid "IPv6 assignment hint"
msgstr ""
msgid "NTP server candidates"
msgstr "Kandidáti NTP serveru"
-msgid "NTP sync time-out"
-msgstr ""
-
msgid "Name"
msgstr "Název"
msgid "Optional"
msgstr ""
-msgid "Optional, specify to override default server (tic.sixxs.net)"
-msgstr ""
-
-msgid "Optional, use when the SIXXS account has more than one tunnel"
-msgstr ""
-
msgid ""
"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
"starting with <code>0x</code>."
msgid "Request IPv6-prefix of length"
msgstr ""
-msgid "Require TLS"
-msgstr ""
-
msgid "Required"
msgstr ""
msgid "Route type"
msgstr ""
-msgid "Routed IPv6 prefix for downstream interfaces"
-msgstr ""
-
msgid "Router Advertisement-Service"
msgstr ""
msgid "SHA256"
msgstr ""
-msgid ""
-"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) "
-"use 6in4 instead"
-msgstr ""
-
-msgid "SIXXS-handle[/Tunnel-ID]"
-msgstr ""
-
msgid "SNR"
msgstr ""
msgid "Server Settings"
msgstr "Nastavení serveru"
-msgid "Server password"
-msgstr ""
-
-msgid ""
-"Server password, enter the specific password of the tunnel when the username "
-"contains the tunnel ID"
-msgstr ""
-
-msgid "Server username"
-msgstr ""
-
msgid "Service Name"
msgstr "Název služby"
msgid "Source"
msgstr "Zdroj"
-msgid "Source routing"
-msgstr ""
-
msgid "Specifies the directory the device is attached to"
msgstr ""
"nastavení, bude možná nutné obnovit adresu vašeho počítače, aby jste se "
"mohli znovu připojit."
-msgid ""
-"The tunnel end-point is behind NAT, defaults to disabled and only applies to "
-"AYIYA"
-msgstr ""
-
msgid ""
"The uploaded image file does not contain a supported format. Make sure that "
"you choose the generic image format for your platform."
msgid "Tunnel Link"
msgstr ""
-msgid "Tunnel broker protocol"
-msgstr ""
-
-msgid "Tunnel setup server"
-msgstr ""
-
-msgid "Tunnel type"
-msgstr ""
-
msgid "Tx-Power"
msgstr "Tx-Power"
msgid "Vendor Class to send when requesting DHCP"
msgstr ""
-msgid "Verbose"
-msgstr ""
-
-msgid "Verbose logging by aiccu daemon"
-msgstr ""
-
msgid "Verify"
msgstr "Ověřit"
"Šifrování WPA vyžaduje nainstalovaný wpa_supplicant (pro klientský režim) "
"nebo hostapd (pro AP a ad-hoc režim)."
-msgid ""
-"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)"
-msgstr ""
-
msgid "Waiting for changes to be applied..."
msgstr "Čekání na realizaci změn..."
"communications"
msgstr ""
-msgid "Whether to create an IPv6 default route over the tunnel"
-msgstr ""
-
-msgid "Whether to route only packets from delegated prefixes"
-msgstr ""
-
msgid "Width"
msgstr ""
msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
msgstr "místní <abbr title=\"Domain Name System\">DNS</abbr> soubor"
-msgid "minimum 1280, maximum 1480"
-msgstr ""
-
msgid "minutes"
msgstr ""
msgid "ADSL"
msgstr ""
-msgid "AICCU (SIXXS)"
-msgstr ""
-
msgid "ANSI T1.413"
msgstr ""
msgid "ATU-C System Vendor ID"
msgstr ""
-msgid "AYIYA"
-msgstr ""
-
msgid "Access Concentrator"
msgstr "Access Concentrator"
msgid "Allowed IPs"
msgstr "Erlaubte IP-Adressen"
-msgid ""
-"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
-"\">Tunneling Comparison</a> on SIXXS"
-msgstr ""
-"Siehe auch <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
-"\">Tunneling Comparison</a> bei SIXXS."
-
msgid "Always announce default router"
msgstr "Immer Defaultrouter ankündigen"
msgid "Band"
msgstr "Frequenztyp"
-msgid "Behind NAT"
-msgstr "NAT"
-
msgid ""
"Below is the determined list of files to backup. It consists of changed "
"configuration files marked by opkg, essential base files and the user "
msgid "Connection Limit"
msgstr "Verbindungslimit"
-msgid "Connection to server fails when TLS cannot be used"
-msgstr "TLS zwingend vorraussetzen und abbrechen wenn TLS fehlschlägt."
-
msgid "Connections"
msgstr "Verbindungen"
msgid "Default is stateless + stateful"
msgstr "Der Standardwert ist zustandslos und zustandsorientiert"
-msgid "Default route"
-msgstr "Default Route"
-
msgid "Default state"
msgstr "Ausgangszustand"
msgid "Header Error Code Errors (HEC)"
msgstr "Anzahl Header-Error-Code-Fehler (HEC)"
-msgid "Heartbeat"
-msgstr ""
-
msgid ""
"Here you can configure the basic aspects of your device like its hostname or "
"the timezone."
msgid "IPv6 address"
msgstr "IPv6 Adresse"
-msgid "IPv6 address delegated to the local tunnel endpoint (optional)"
-msgstr "Zum lokalen Tunnelendpunkt delegierte IPv6-Adresse (optional)"
-
msgid "IPv6 assignment hint"
msgstr "IPv6 Zuweisungshinweis"
msgid "NTP server candidates"
msgstr "NTP Server Kandidaten"
-msgid "NTP sync time-out"
-msgstr "NTP Synchronisierungstimeout"
-
msgid "Name"
msgstr "Name"
msgid "Optional"
msgstr "Optional"
-msgid "Optional, specify to override default server (tic.sixxs.net)"
-msgstr ""
-"Optional, angeben um den Standardserver (tic.sixxs.net) zu überschreiben"
-
-msgid "Optional, use when the SIXXS account has more than one tunnel"
-msgstr ""
-"Optional, angeben wenn das SIXSS Konto mehr als einen Tunnel beinhaltet"
-
msgid ""
"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
"starting with <code>0x</code>."
msgid "Request IPv6-prefix of length"
msgstr "IPv6-Präfix dieser Länge anfordern"
-msgid "Require TLS"
-msgstr "TLS erfordern"
-
msgid "Required"
msgstr "Benötigt"
msgid "Route type"
msgstr "Routen-Typ"
-msgid "Routed IPv6 prefix for downstream interfaces"
-msgstr "Geroutetes IPv6-Präfix für nachgelagerte Schnittstellen"
-
msgid "Router Advertisement-Service"
msgstr "Router-Advertisement-Dienst"
msgid "SHA256"
msgstr ""
-msgid ""
-"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) "
-"use 6in4 instead"
-msgstr ""
-
-msgid "SIXXS-handle[/Tunnel-ID]"
-msgstr ""
-
msgid "SNR"
msgstr ""
msgid "Server Settings"
msgstr "Servereinstellungen"
-msgid "Server password"
-msgstr "Server Passwort"
-
-msgid ""
-"Server password, enter the specific password of the tunnel when the username "
-"contains the tunnel ID"
-msgstr ""
-"Server Passwort bzw. das tunnelspezifische Passwort wenn der Benutzername "
-"eine Tunnel-ID beinhaltet."
-
-msgid "Server username"
-msgstr "Server Benutzername"
-
msgid "Service Name"
msgstr "Service-Name"
msgid "Source"
msgstr "Quelle"
-msgid "Source routing"
-msgstr "Quell-Routing"
-
msgid "Specifies the directory the device is attached to"
msgstr "Nennt das Verzeichnis, an welches das Gerät angebunden ist"
"Konfiguration ist es notwendig, dass Sie auf Ihrem Computer eine neue IP-"
"Adresse beziehen müssen um auf das Gerät zugreifen zu können."
-msgid ""
-"The tunnel end-point is behind NAT, defaults to disabled and only applies to "
-"AYIYA"
-msgstr ""
-"Der lokale Tunnel-Endpunkt ist hinter einem NAT. Standard ist deaktiviert, "
-"nur auf AYIYA anwendbar."
-
msgid ""
"The uploaded image file does not contain a supported format. Make sure that "
"you choose the generic image format for your platform."
msgid "Tunnel Link"
msgstr "Basisschnittstelle"
-msgid "Tunnel broker protocol"
-msgstr "Tunnel-Boker-Protokoll"
-
-msgid "Tunnel setup server"
-msgstr "Tunnel-Setup-Server"
-
-msgid "Tunnel type"
-msgstr "Tunneltyp"
-
msgid "Tx-Power"
msgstr "Sendestärke"
msgid "Vendor Class to send when requesting DHCP"
msgstr "Bei DHCP-Anfragen gesendete Vendor-Klasse"
-msgid "Verbose"
-msgstr "Umfangreiche Ausgaben"
-
-msgid "Verbose logging by aiccu daemon"
-msgstr "Aktiviert erweiterte Protokollierung durch den AICCU-Prozess"
-
msgid "Verify"
msgstr "Verifizieren"
"WPA-Verschlüsselung benötigt wpa_supplicant (für Client-Modus) oder hostapd "
"(für AP oder Ad-Hoc Modus)."
-msgid ""
-"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)"
-msgstr ""
-"Warte die angegebene Anzahl an Sekunden auf NTP-Synchronisierung, der Wert 0 "
-"deaktiviert das Warten (optional)"
-
msgid "Waiting for changes to be applied..."
msgstr "Änderungen werden angewandt..."
"Wenn PSK in Verwendung ist, können PMK-Schlüssel lokal ohne Inter-Access-"
"Point-Kommunikation erzeugt werden."
-msgid "Whether to create an IPv6 default route over the tunnel"
-msgstr ""
-"Gibt an, ob eine IPv6-Default-Route durch den Tunnel etabliert werden soll"
-
-msgid "Whether to route only packets from delegated prefixes"
-msgstr "Gibt an, ob nur Pakete von delegierten Präfixen geroutet werden sollen"
-
msgid "Width"
msgstr "Breite"
msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
msgstr "Lokale DNS-Datei"
-msgid "minimum 1280, maximum 1480"
-msgstr "Minimum 1280, Maximum 1480"
-
msgid "minutes"
msgstr "Minuten"
msgid "« Back"
msgstr "« Zurück"
-
-#~ msgid "Apply"
-#~ msgstr "Anwenden"
-
-#~ msgid "Applying changes"
-#~ msgstr "Änderungen werden angewandt"
-
-#~ msgid "Configuration applied."
-#~ msgstr "Konfiguration angewendet."
-
-#~ msgid "Save & Apply"
-#~ msgstr "Speichern & Anwenden"
-
-#~ msgid "The following changes have been committed"
-#~ msgstr "Die folgenden Änderungen wurden angewendet"
-
-#~ msgid "There are no pending changes to apply!"
-#~ msgstr "Es gibt keine ausstehenen Änderungen anzuwenden!"
-
-#~ msgid "Action"
-#~ msgstr "Aktion"
-
-#~ msgid "Buttons"
-#~ msgstr "Knöpfe"
-
-#~ msgid "Handler"
-#~ msgstr "Handler"
-
-#~ msgid "Maximum hold time"
-#~ msgstr "Maximalzeit zum Halten der Verbindung"
-
-#~ msgid "Minimum hold time"
-#~ msgstr "Minimalzeit zum Halten der Verbindung"
-
-#~ msgid "Path to executable which handles the button event"
-#~ msgstr "Ausführbare Datei welche das Schalter-Ereignis verarbeitet"
-
-#~ msgid "Specifies the button state to handle"
-#~ msgstr "Gibt den zu behandelnden Tastenstatus an"
-
-#~ msgid "This page allows the configuration of custom button actions"
-#~ msgstr ""
-#~ "Diese Seite ermöglicht die Konfiguration benutzerdefinierter "
-#~ "Tastenaktionen"
-
-#~ msgid "Leasetime"
-#~ msgstr "Laufzeit"
-
-#~ msgid "Optional."
-#~ msgstr "Optional"
-
-#~ msgid "AuthGroup"
-#~ msgstr "Berechtigungsgruppe"
-
-#~ msgid "automatic"
-#~ msgstr "automatisch"
-
-#~ msgid "AR Support"
-#~ msgstr "AR-Unterstützung"
-
-#~ msgid "Atheros 802.11%s Wireless Controller"
-#~ msgstr "Atheros 802.11%s W-LAN Adapter"
-
-#~ msgid "Background Scan"
-#~ msgstr "Hintergrundscan"
-
-#~ msgid "Compression"
-#~ msgstr "Kompression"
-
-#~ msgid "Disable HW-Beacon timer"
-#~ msgstr "Deaktiviere Hardware-Beacon Zeitgeber"
-
-#~ msgid "Do not send probe responses"
-#~ msgstr "Scan-Anforderungen nicht beantworten"
-
-#~ msgid "Fast Frames"
-#~ msgstr "Schnelle Frames"
-
-#~ msgid "Maximum Rate"
-#~ msgstr "Höchstübertragungsrate"
-
-#~ msgid "Minimum Rate"
-#~ msgstr "Mindestübertragungsrate"
-
-#~ msgid "Multicast Rate"
-#~ msgstr "Multicastrate"
-
-#~ msgid "Outdoor Channels"
-#~ msgstr "Funkkanal für den Ausseneinsatz"
-
-#~ msgid "Regulatory Domain"
-#~ msgstr "Geltungsbereich (Regulatory Domain)"
-
-#~ msgid "Separate WDS"
-#~ msgstr "Separates WDS"
-
-#~ msgid "Static WDS"
-#~ msgstr "Statisches WDS"
-
-#~ msgid "Turbo Mode"
-#~ msgstr "Turbo Modus"
-
-#~ msgid "XR Support"
-#~ msgstr "XR-Unterstützung"
-
-#~ msgid "An additional network will be created if you leave this unchecked."
-#~ msgstr ""
-#~ "Erzeugt ein zusätzliches Netzwerk wenn diese Option nicht ausgewählt ist"
-
-#~ msgid "Join Network: Settings"
-#~ msgstr "Netzwerk beitreten: Einstellungen"
-
-#~ msgid "CPU"
-#~ msgstr "Prozessor"
-
-#~ msgid "Port %d"
-#~ msgstr "Port %d"
-
-#~ msgid "Port %d is untagged in multiple VLANs!"
-#~ msgstr "Port %d ist untagged in mehreren VLANs!"
-
-#~ msgid "VLAN Interface"
-#~ msgstr "VLAN Schnittstelle"
msgid "ADSL"
msgstr ""
-msgid "AICCU (SIXXS)"
-msgstr ""
-
msgid "ANSI T1.413"
msgstr ""
msgid "ATU-C System Vendor ID"
msgstr ""
-msgid "AYIYA"
-msgstr ""
-
msgid "Access Concentrator"
msgstr "Συγκεντρωτής Πρόσβασης "
msgid "Allowed IPs"
msgstr ""
-msgid ""
-"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
-"\">Tunneling Comparison</a> on SIXXS"
-msgstr ""
-
msgid "Always announce default router"
msgstr ""
msgid "Band"
msgstr ""
-msgid "Behind NAT"
-msgstr ""
-
msgid ""
"Below is the determined list of files to backup. It consists of changed "
"configuration files marked by opkg, essential base files and the user "
msgid "Connection Limit"
msgstr "Όριο Συνδέσεων"
-msgid "Connection to server fails when TLS cannot be used"
-msgstr ""
-
msgid "Connections"
msgstr "Συνδέσεις"
msgid "Default is stateless + stateful"
msgstr ""
-msgid "Default route"
-msgstr ""
-
msgid "Default state"
msgstr "Προεπιλεγμένη κατάσταση"
msgid "Header Error Code Errors (HEC)"
msgstr ""
-msgid "Heartbeat"
-msgstr ""
-
msgid ""
"Here you can configure the basic aspects of your device like its hostname or "
"the timezone."
msgid "IPv6 address"
msgstr "Διεύθυνση IPv6"
-msgid "IPv6 address delegated to the local tunnel endpoint (optional)"
-msgstr ""
-
msgid "IPv6 assignment hint"
msgstr ""
msgid "NTP server candidates"
msgstr ""
-msgid "NTP sync time-out"
-msgstr ""
-
msgid "Name"
msgstr "Όνομα"
msgid "Optional"
msgstr ""
-msgid "Optional, specify to override default server (tic.sixxs.net)"
-msgstr ""
-
-msgid "Optional, use when the SIXXS account has more than one tunnel"
-msgstr ""
-
msgid ""
"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
"starting with <code>0x</code>."
msgid "Request IPv6-prefix of length"
msgstr ""
-msgid "Require TLS"
-msgstr ""
-
msgid "Required"
msgstr ""
msgid "Route type"
msgstr ""
-msgid "Routed IPv6 prefix for downstream interfaces"
-msgstr ""
-
msgid "Router Advertisement-Service"
msgstr ""
msgid "SHA256"
msgstr ""
-msgid ""
-"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) "
-"use 6in4 instead"
-msgstr ""
-
-msgid "SIXXS-handle[/Tunnel-ID]"
-msgstr ""
-
msgid "SNR"
msgstr ""
msgid "Server Settings"
msgstr "Ρυθμίσεις Εξυπηρετητή"
-msgid "Server password"
-msgstr ""
-
-msgid ""
-"Server password, enter the specific password of the tunnel when the username "
-"contains the tunnel ID"
-msgstr ""
-
-msgid "Server username"
-msgstr ""
-
msgid "Service Name"
msgstr "Όνομα Υπηρεσίας"
msgid "Source"
msgstr "Πηγή"
-msgid "Source routing"
-msgstr ""
-
msgid "Specifies the directory the device is attached to"
msgstr ""
"είναι πιθανό να χρειαστεί να ανανεώσετε την διεύθυνση του υπολογιστή σας για "
"να αποκτήσετε ξανά πρόσβαση στη συσκευή."
-msgid ""
-"The tunnel end-point is behind NAT, defaults to disabled and only applies to "
-"AYIYA"
-msgstr ""
-
msgid ""
"The uploaded image file does not contain a supported format. Make sure that "
"you choose the generic image format for your platform."
msgid "Tunnel Link"
msgstr ""
-msgid "Tunnel broker protocol"
-msgstr ""
-
-msgid "Tunnel setup server"
-msgstr ""
-
-msgid "Tunnel type"
-msgstr ""
-
msgid "Tx-Power"
msgstr "Ισχύς Εκπομπής"
msgid "Vendor Class to send when requesting DHCP"
msgstr ""
-msgid "Verbose"
-msgstr ""
-
-msgid "Verbose logging by aiccu daemon"
-msgstr ""
-
msgid "Verify"
msgstr ""
"and ad-hoc mode) to be installed."
msgstr ""
-msgid ""
-"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)"
-msgstr ""
-
msgid "Waiting for changes to be applied..."
msgstr ""
"communications"
msgstr ""
-msgid "Whether to create an IPv6 default route over the tunnel"
-msgstr ""
-
-msgid "Whether to route only packets from delegated prefixes"
-msgstr ""
-
msgid "Width"
msgstr ""
msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
msgstr "τοπικό αρχείο <abbr title=\"Domain Name System\">DNS</abbr>"
-msgid "minimum 1280, maximum 1480"
-msgstr ""
-
msgid "minutes"
msgstr ""
msgid "ADSL"
msgstr ""
-msgid "AICCU (SIXXS)"
-msgstr ""
-
msgid "ANSI T1.413"
msgstr ""
msgid "ATU-C System Vendor ID"
msgstr ""
-msgid "AYIYA"
-msgstr ""
-
msgid "Access Concentrator"
msgstr "Access Concentrator"
msgid "Allowed IPs"
msgstr ""
-msgid ""
-"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
-"\">Tunneling Comparison</a> on SIXXS"
-msgstr ""
-
msgid "Always announce default router"
msgstr ""
msgid "Band"
msgstr ""
-msgid "Behind NAT"
-msgstr ""
-
msgid ""
"Below is the determined list of files to backup. It consists of changed "
"configuration files marked by opkg, essential base files and the user "
msgid "Connection Limit"
msgstr "Connection Limit"
-msgid "Connection to server fails when TLS cannot be used"
-msgstr ""
-
msgid "Connections"
msgstr "Connections"
msgid "Default is stateless + stateful"
msgstr ""
-msgid "Default route"
-msgstr ""
-
msgid "Default state"
msgstr "Default state"
msgid "Header Error Code Errors (HEC)"
msgstr ""
-msgid "Heartbeat"
-msgstr ""
-
msgid ""
"Here you can configure the basic aspects of your device like its hostname or "
"the timezone."
msgid "IPv6 address"
msgstr ""
-msgid "IPv6 address delegated to the local tunnel endpoint (optional)"
-msgstr ""
-
msgid "IPv6 assignment hint"
msgstr ""
msgid "NTP server candidates"
msgstr ""
-msgid "NTP sync time-out"
-msgstr ""
-
msgid "Name"
msgstr "Name"
msgid "Optional"
msgstr ""
-msgid "Optional, specify to override default server (tic.sixxs.net)"
-msgstr ""
-
-msgid "Optional, use when the SIXXS account has more than one tunnel"
-msgstr ""
-
msgid ""
"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
"starting with <code>0x</code>."
msgid "Request IPv6-prefix of length"
msgstr ""
-msgid "Require TLS"
-msgstr ""
-
msgid "Required"
msgstr ""
msgid "Route type"
msgstr ""
-msgid "Routed IPv6 prefix for downstream interfaces"
-msgstr ""
-
msgid "Router Advertisement-Service"
msgstr ""
msgid "SHA256"
msgstr ""
-msgid ""
-"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) "
-"use 6in4 instead"
-msgstr ""
-
-msgid "SIXXS-handle[/Tunnel-ID]"
-msgstr ""
-
msgid "SNR"
msgstr ""
msgid "Server Settings"
msgstr ""
-msgid "Server password"
-msgstr ""
-
-msgid ""
-"Server password, enter the specific password of the tunnel when the username "
-"contains the tunnel ID"
-msgstr ""
-
-msgid "Server username"
-msgstr ""
-
msgid "Service Name"
msgstr ""
msgid "Source"
msgstr "Source"
-msgid "Source routing"
-msgstr ""
-
msgid "Specifies the directory the device is attached to"
msgstr ""
"address of your computer to reach the device again, depending on your "
"settings."
-msgid ""
-"The tunnel end-point is behind NAT, defaults to disabled and only applies to "
-"AYIYA"
-msgstr ""
-
msgid ""
"The uploaded image file does not contain a supported format. Make sure that "
"you choose the generic image format for your platform."
msgid "Tunnel Link"
msgstr ""
-msgid "Tunnel broker protocol"
-msgstr ""
-
-msgid "Tunnel setup server"
-msgstr ""
-
-msgid "Tunnel type"
-msgstr ""
-
msgid "Tx-Power"
msgstr ""
msgid "Vendor Class to send when requesting DHCP"
msgstr ""
-msgid "Verbose"
-msgstr ""
-
-msgid "Verbose logging by aiccu daemon"
-msgstr ""
-
msgid "Verify"
msgstr ""
"WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP "
"and ad-hoc mode) to be installed."
-msgid ""
-"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)"
-msgstr ""
-
msgid "Waiting for changes to be applied..."
msgstr ""
"communications"
msgstr ""
-msgid "Whether to create an IPv6 default route over the tunnel"
-msgstr ""
-
-msgid "Whether to route only packets from delegated prefixes"
-msgstr ""
-
msgid "Width"
msgstr ""
msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
msgstr "local <abbr title=\"Domain Name System\">DNS</abbr> file"
-msgid "minimum 1280, maximum 1480"
-msgstr ""
-
msgid "minutes"
msgstr ""
msgid "ADSL"
msgstr ""
-msgid "AICCU (SIXXS)"
-msgstr ""
-
msgid "ANSI T1.413"
msgstr ""
msgid "ATU-C System Vendor ID"
msgstr ""
-msgid "AYIYA"
-msgstr ""
-
msgid "Access Concentrator"
msgstr "Concentrador de acceso"
msgid "Allowed IPs"
msgstr ""
-msgid ""
-"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
-"\">Tunneling Comparison</a> on SIXXS"
-msgstr ""
-
msgid "Always announce default router"
msgstr ""
msgid "Band"
msgstr ""
-msgid "Behind NAT"
-msgstr ""
-
msgid ""
"Below is the determined list of files to backup. It consists of changed "
"configuration files marked by opkg, essential base files and the user "
msgid "Connection Limit"
msgstr "Límite de conexión"
-msgid "Connection to server fails when TLS cannot be used"
-msgstr ""
-
msgid "Connections"
msgstr "Conexiones"
msgid "Default is stateless + stateful"
msgstr ""
-msgid "Default route"
-msgstr ""
-
msgid "Default state"
msgstr "Estado por defecto"
msgid "Header Error Code Errors (HEC)"
msgstr ""
-msgid "Heartbeat"
-msgstr ""
-
msgid ""
"Here you can configure the basic aspects of your device like its hostname or "
"the timezone."
msgid "IPv6 address"
msgstr "Dirección IPv6"
-msgid "IPv6 address delegated to the local tunnel endpoint (optional)"
-msgstr ""
-
msgid "IPv6 assignment hint"
msgstr ""
msgid "NTP server candidates"
msgstr "Servidores NTP a consultar"
-msgid "NTP sync time-out"
-msgstr ""
-
msgid "Name"
msgstr "Nombre"
msgid "Optional"
msgstr ""
-msgid "Optional, specify to override default server (tic.sixxs.net)"
-msgstr ""
-
-msgid "Optional, use when the SIXXS account has more than one tunnel"
-msgstr ""
-
msgid ""
"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
"starting with <code>0x</code>."
msgid "Request IPv6-prefix of length"
msgstr ""
-msgid "Require TLS"
-msgstr ""
-
msgid "Required"
msgstr ""
msgid "Route type"
msgstr ""
-msgid "Routed IPv6 prefix for downstream interfaces"
-msgstr ""
-
msgid "Router Advertisement-Service"
msgstr ""
msgid "SHA256"
msgstr ""
-msgid ""
-"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) "
-"use 6in4 instead"
-msgstr ""
-
-msgid "SIXXS-handle[/Tunnel-ID]"
-msgstr ""
-
msgid "SNR"
msgstr ""
msgid "Server Settings"
msgstr "Configuración del servidor"
-msgid "Server password"
-msgstr ""
-
-msgid ""
-"Server password, enter the specific password of the tunnel when the username "
-"contains the tunnel ID"
-msgstr ""
-
-msgid "Server username"
-msgstr ""
-
msgid "Service Name"
msgstr "Nombre de servicio"
msgid "Source"
msgstr "Origen"
-msgid "Source routing"
-msgstr ""
-
msgid "Specifies the directory the device is attached to"
msgstr "Especifica el directorio al que está enlazado el dispositivo"
"Espere unos minutos antes de reconectar. Es posible que tenga que renovar la "
"conexión de su ordenador para poder acceder de nuevo al dispositivo."
-msgid ""
-"The tunnel end-point is behind NAT, defaults to disabled and only applies to "
-"AYIYA"
-msgstr ""
-
msgid ""
"The uploaded image file does not contain a supported format. Make sure that "
"you choose the generic image format for your platform."
msgid "Tunnel Link"
msgstr ""
-msgid "Tunnel broker protocol"
-msgstr ""
-
-msgid "Tunnel setup server"
-msgstr ""
-
-msgid "Tunnel type"
-msgstr ""
-
msgid "Tx-Power"
msgstr "Potencia-TX"
msgid "Vendor Class to send when requesting DHCP"
msgstr "Clase de vendedor a enviar cuando solicite DHCP"
-msgid "Verbose"
-msgstr ""
-
-msgid "Verbose logging by aiccu daemon"
-msgstr ""
-
msgid "Verify"
msgstr "Verificar"
"WPA-Encryption necesita que estén instalados wpa_supplicant (para el modo "
"cliente o hostapd (para los modos AP y ad-hoc)."
-msgid ""
-"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)"
-msgstr ""
-
msgid "Waiting for changes to be applied..."
msgstr "Esperando a que se realicen los cambios..."
"communications"
msgstr ""
-msgid "Whether to create an IPv6 default route over the tunnel"
-msgstr ""
-
-msgid "Whether to route only packets from delegated prefixes"
-msgstr ""
-
msgid "Width"
msgstr ""
msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
msgstr "Archvo <abbr title=\"Domain Name System\">DNS</abbr> local"
-msgid "minimum 1280, maximum 1480"
-msgstr ""
-
msgid "minutes"
msgstr ""
msgid "ADSL"
msgstr ""
-msgid "AICCU (SIXXS)"
-msgstr ""
-
msgid "ANSI T1.413"
msgstr ""
msgid "ATU-C System Vendor ID"
msgstr ""
-msgid "AYIYA"
-msgstr ""
-
msgid "Access Concentrator"
msgstr "Concentrateur d'accès"
msgid "Allowed IPs"
msgstr ""
-msgid ""
-"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
-"\">Tunneling Comparison</a> on SIXXS"
-msgstr ""
-
msgid "Always announce default router"
msgstr ""
msgid "Band"
msgstr ""
-msgid "Behind NAT"
-msgstr ""
-
msgid ""
"Below is the determined list of files to backup. It consists of changed "
"configuration files marked by opkg, essential base files and the user "
msgid "Connection Limit"
msgstr "Limite de connexion"
-msgid "Connection to server fails when TLS cannot be used"
-msgstr ""
-
msgid "Connections"
msgstr "Connexions"
msgid "Default is stateless + stateful"
msgstr ""
-msgid "Default route"
-msgstr ""
-
msgid "Default state"
msgstr "État par défaut"
msgid "Header Error Code Errors (HEC)"
msgstr ""
-msgid "Heartbeat"
-msgstr ""
-
msgid ""
"Here you can configure the basic aspects of your device like its hostname or "
"the timezone."
msgid "IPv6 address"
msgstr "Adresse IPv6"
-msgid "IPv6 address delegated to the local tunnel endpoint (optional)"
-msgstr ""
-
msgid "IPv6 assignment hint"
msgstr ""
msgid "NTP server candidates"
msgstr "Serveurs NTP candidats"
-msgid "NTP sync time-out"
-msgstr ""
-
msgid "Name"
msgstr "Nom"
msgid "Optional"
msgstr ""
-msgid "Optional, specify to override default server (tic.sixxs.net)"
-msgstr ""
-
-msgid "Optional, use when the SIXXS account has more than one tunnel"
-msgstr ""
-
msgid ""
"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
"starting with <code>0x</code>."
msgid "Request IPv6-prefix of length"
msgstr ""
-msgid "Require TLS"
-msgstr ""
-
msgid "Required"
msgstr ""
msgid "Route type"
msgstr ""
-msgid "Routed IPv6 prefix for downstream interfaces"
-msgstr ""
-
msgid "Router Advertisement-Service"
msgstr ""
msgid "SHA256"
msgstr ""
-msgid ""
-"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) "
-"use 6in4 instead"
-msgstr ""
-
-msgid "SIXXS-handle[/Tunnel-ID]"
-msgstr ""
-
msgid "SNR"
msgstr ""
msgid "Server Settings"
msgstr "Paramètres du serveur"
-msgid "Server password"
-msgstr ""
-
-msgid ""
-"Server password, enter the specific password of the tunnel when the username "
-"contains the tunnel ID"
-msgstr ""
-
-msgid "Server username"
-msgstr ""
-
msgid "Service Name"
msgstr "Nom du service"
msgid "Source"
msgstr "Source"
-msgid "Source routing"
-msgstr ""
-
msgid "Specifies the directory the device is attached to"
msgstr "Indique le répertoire auquel le périphérique est rattaché"
"address of your computer to reach the device again, depending on your "
"settings."
-msgid ""
-"The tunnel end-point is behind NAT, defaults to disabled and only applies to "
-"AYIYA"
-msgstr ""
-
msgid ""
"The uploaded image file does not contain a supported format. Make sure that "
"you choose the generic image format for your platform."
msgid "Tunnel Link"
msgstr ""
-msgid "Tunnel broker protocol"
-msgstr ""
-
-msgid "Tunnel setup server"
-msgstr ""
-
-msgid "Tunnel type"
-msgstr ""
-
msgid "Tx-Power"
msgstr "Puissance d'émission"
msgid "Vendor Class to send when requesting DHCP"
msgstr "Classe de fournisseur à envoyer dans les requêtes DHCP"
-msgid "Verbose"
-msgstr ""
-
-msgid "Verbose logging by aiccu daemon"
-msgstr ""
-
msgid "Verify"
msgstr "Vérifier"
"Le chiffrage WPA nécessite l'installation du paquet wpa_supplicant (en mode "
"client) ou hostapd (en mode Point d'accès ou Ad-hoc)."
-msgid ""
-"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)"
-msgstr ""
-
msgid "Waiting for changes to be applied..."
msgstr "En attente de l'application des changements..."
"communications"
msgstr ""
-msgid "Whether to create an IPv6 default route over the tunnel"
-msgstr ""
-
-msgid "Whether to route only packets from delegated prefixes"
-msgstr ""
-
msgid "Width"
msgstr ""
msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
msgstr "fichier de résolution local"
-msgid "minimum 1280, maximum 1480"
-msgstr ""
-
msgid "minutes"
msgstr ""
msgid "ADSL"
msgstr ""
-msgid "AICCU (SIXXS)"
-msgstr ""
-
msgid "ANSI T1.413"
msgstr ""
msgid "ATU-C System Vendor ID"
msgstr ""
-msgid "AYIYA"
-msgstr ""
-
#, fuzzy
msgid "Access Concentrator"
msgstr "מרכז גישות"
msgid "Allowed IPs"
msgstr ""
-msgid ""
-"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
-"\">Tunneling Comparison</a> on SIXXS"
-msgstr ""
-
msgid "Always announce default router"
msgstr ""
msgid "Band"
msgstr ""
-msgid "Behind NAT"
-msgstr ""
-
msgid ""
"Below is the determined list of files to backup. It consists of changed "
"configuration files marked by opkg, essential base files and the user "
msgid "Connection Limit"
msgstr "מגבלת חיבורים"
-msgid "Connection to server fails when TLS cannot be used"
-msgstr ""
-
msgid "Connections"
msgstr "חיבורים"
msgid "Default is stateless + stateful"
msgstr ""
-msgid "Default route"
-msgstr ""
-
msgid "Default state"
msgstr ""
msgid "Header Error Code Errors (HEC)"
msgstr ""
-msgid "Heartbeat"
-msgstr ""
-
msgid ""
"Here you can configure the basic aspects of your device like its hostname or "
"the timezone."
msgid "IPv6 address"
msgstr ""
-msgid "IPv6 address delegated to the local tunnel endpoint (optional)"
-msgstr ""
-
msgid "IPv6 assignment hint"
msgstr ""
msgid "NTP server candidates"
msgstr ""
-msgid "NTP sync time-out"
-msgstr ""
-
msgid "Name"
msgstr "שם"
msgid "Optional"
msgstr ""
-msgid "Optional, specify to override default server (tic.sixxs.net)"
-msgstr ""
-
-msgid "Optional, use when the SIXXS account has more than one tunnel"
-msgstr ""
-
msgid ""
"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
"starting with <code>0x</code>."
msgid "Request IPv6-prefix of length"
msgstr ""
-msgid "Require TLS"
-msgstr ""
-
msgid "Required"
msgstr ""
msgid "Route type"
msgstr ""
-msgid "Routed IPv6 prefix for downstream interfaces"
-msgstr ""
-
msgid "Router Advertisement-Service"
msgstr ""
msgid "SHA256"
msgstr ""
-msgid ""
-"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) "
-"use 6in4 instead"
-msgstr ""
-
-msgid "SIXXS-handle[/Tunnel-ID]"
-msgstr ""
-
msgid "SNR"
msgstr ""
msgid "Server Settings"
msgstr ""
-msgid "Server password"
-msgstr ""
-
-msgid ""
-"Server password, enter the specific password of the tunnel when the username "
-"contains the tunnel ID"
-msgstr ""
-
-msgid "Server username"
-msgstr ""
-
msgid "Service Name"
msgstr ""
msgid "Source"
msgstr "מקור"
-msgid "Source routing"
-msgstr ""
-
msgid "Specifies the directory the device is attached to"
msgstr ""
"settings."
msgstr ""
-msgid ""
-"The tunnel end-point is behind NAT, defaults to disabled and only applies to "
-"AYIYA"
-msgstr ""
-
msgid ""
"The uploaded image file does not contain a supported format. Make sure that "
"you choose the generic image format for your platform."
msgid "Tunnel Link"
msgstr ""
-msgid "Tunnel broker protocol"
-msgstr ""
-
-msgid "Tunnel setup server"
-msgstr ""
-
-msgid "Tunnel type"
-msgstr ""
-
msgid "Tx-Power"
msgstr "עוצמת שידור"
msgid "Vendor Class to send when requesting DHCP"
msgstr ""
-msgid "Verbose"
-msgstr ""
-
-msgid "Verbose logging by aiccu daemon"
-msgstr ""
-
msgid "Verify"
msgstr ""
"and ad-hoc mode) to be installed."
msgstr ""
-msgid ""
-"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)"
-msgstr ""
-
msgid "Waiting for changes to be applied..."
msgstr ""
"communications"
msgstr ""
-msgid "Whether to create an IPv6 default route over the tunnel"
-msgstr ""
-
-msgid "Whether to route only packets from delegated prefixes"
-msgstr ""
-
msgid "Width"
msgstr ""
msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
msgstr ""
-msgid "minimum 1280, maximum 1480"
-msgstr ""
-
msgid "minutes"
msgstr ""
msgid "ADSL"
msgstr ""
-msgid "AICCU (SIXXS)"
-msgstr ""
-
msgid "ANSI T1.413"
msgstr ""
msgid "ATU-C System Vendor ID"
msgstr ""
-msgid "AYIYA"
-msgstr ""
-
msgid "Access Concentrator"
msgstr "Elérési központ"
msgid "Allowed IPs"
msgstr ""
-msgid ""
-"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
-"\">Tunneling Comparison</a> on SIXXS"
-msgstr ""
-
msgid "Always announce default router"
msgstr ""
msgid "Band"
msgstr ""
-msgid "Behind NAT"
-msgstr ""
-
msgid ""
"Below is the determined list of files to backup. It consists of changed "
"configuration files marked by opkg, essential base files and the user "
msgid "Connection Limit"
msgstr "Kapcsolati korlát"
-msgid "Connection to server fails when TLS cannot be used"
-msgstr ""
-
msgid "Connections"
msgstr "Kapcsolatok"
msgid "Default is stateless + stateful"
msgstr ""
-msgid "Default route"
-msgstr ""
-
msgid "Default state"
msgstr "Alapértelmezett állapot"
msgid "Header Error Code Errors (HEC)"
msgstr ""
-msgid "Heartbeat"
-msgstr ""
-
msgid ""
"Here you can configure the basic aspects of your device like its hostname or "
"the timezone."
msgid "IPv6 address"
msgstr "IPv6 cím"
-msgid "IPv6 address delegated to the local tunnel endpoint (optional)"
-msgstr ""
-
msgid "IPv6 assignment hint"
msgstr ""
msgid "NTP server candidates"
msgstr "Kijelölt NTP kiszolgálók"
-msgid "NTP sync time-out"
-msgstr ""
-
msgid "Name"
msgstr "Név"
msgid "Optional"
msgstr ""
-msgid "Optional, specify to override default server (tic.sixxs.net)"
-msgstr ""
-
-msgid "Optional, use when the SIXXS account has more than one tunnel"
-msgstr ""
-
msgid ""
"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
"starting with <code>0x</code>."
msgid "Request IPv6-prefix of length"
msgstr ""
-msgid "Require TLS"
-msgstr ""
-
msgid "Required"
msgstr ""
msgid "Route type"
msgstr ""
-msgid "Routed IPv6 prefix for downstream interfaces"
-msgstr ""
-
msgid "Router Advertisement-Service"
msgstr ""
msgid "SHA256"
msgstr ""
-msgid ""
-"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) "
-"use 6in4 instead"
-msgstr ""
-
-msgid "SIXXS-handle[/Tunnel-ID]"
-msgstr ""
-
msgid "SNR"
msgstr ""
msgid "Server Settings"
msgstr "Kiszolgáló beállításai"
-msgid "Server password"
-msgstr ""
-
-msgid ""
-"Server password, enter the specific password of the tunnel when the username "
-"contains the tunnel ID"
-msgstr ""
-
-msgid "Server username"
-msgstr ""
-
msgid "Service Name"
msgstr "Szolgáltatás neve"
msgid "Source"
msgstr "Forrás"
-msgid "Source routing"
-msgstr ""
-
msgid "Specifies the directory the device is attached to"
msgstr "Megadja az eszköz csatlakozási könyvtárát."
"eléréséhez a beállításaitól függően szükséges lehet a számítógépe IP-címének "
"megújítása."
-msgid ""
-"The tunnel end-point is behind NAT, defaults to disabled and only applies to "
-"AYIYA"
-msgstr ""
-
msgid ""
"The uploaded image file does not contain a supported format. Make sure that "
"you choose the generic image format for your platform."
msgid "Tunnel Link"
msgstr ""
-msgid "Tunnel broker protocol"
-msgstr ""
-
-msgid "Tunnel setup server"
-msgstr ""
-
-msgid "Tunnel type"
-msgstr ""
-
msgid "Tx-Power"
msgstr "Adóteljesítmény"
msgid "Vendor Class to send when requesting DHCP"
msgstr "DHCP kérés során küldendő 'Vendor Class'"
-msgid "Verbose"
-msgstr ""
-
-msgid "Verbose logging by aiccu daemon"
-msgstr ""
-
msgid "Verify"
msgstr "Ellenőrzés"
"WPA titkosításhoz kliens módnál 'wpa_supplicant', hozzáférési pont illetve "
"ad-hoc módnál 'hostapd' telepítése szükséges."
-msgid ""
-"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)"
-msgstr ""
-
msgid "Waiting for changes to be applied..."
msgstr "Várakozás a változtatások alkalmazására..."
"communications"
msgstr ""
-msgid "Whether to create an IPv6 default route over the tunnel"
-msgstr ""
-
-msgid "Whether to route only packets from delegated prefixes"
-msgstr ""
-
msgid "Width"
msgstr ""
msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
msgstr "helyi <abbr title=\"Domain Name System\">DNS</abbr> fájl"
-msgid "minimum 1280, maximum 1480"
-msgstr ""
-
msgid "minutes"
msgstr ""
msgid "ADSL"
msgstr ""
-msgid "AICCU (SIXXS)"
-msgstr ""
-
msgid "ANSI T1.413"
msgstr ""
msgid "ATU-C System Vendor ID"
msgstr ""
-msgid "AYIYA"
-msgstr ""
-
msgid "Access Concentrator"
msgstr "Accesso Concentratore"
msgid "Allowed IPs"
msgstr ""
-msgid ""
-"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
-"\">Tunneling Comparison</a> on SIXXS"
-msgstr ""
-
msgid "Always announce default router"
msgstr ""
msgid "Band"
msgstr ""
-msgid "Behind NAT"
-msgstr ""
-
msgid ""
"Below is the determined list of files to backup. It consists of changed "
"configuration files marked by opkg, essential base files and the user "
msgid "Connection Limit"
msgstr "Limite connessioni"
-msgid "Connection to server fails when TLS cannot be used"
-msgstr ""
-
msgid "Connections"
msgstr "Connessioni"
msgid "Default is stateless + stateful"
msgstr ""
-msgid "Default route"
-msgstr ""
-
msgid "Default state"
msgstr "Stato Predefinito"
msgid "Header Error Code Errors (HEC)"
msgstr ""
-msgid "Heartbeat"
-msgstr ""
-
msgid ""
"Here you can configure the basic aspects of your device like its hostname or "
"the timezone."
msgid "IPv6 address"
msgstr "Indirizzi IPv6"
-msgid "IPv6 address delegated to the local tunnel endpoint (optional)"
-msgstr ""
-
msgid "IPv6 assignment hint"
msgstr ""
msgid "NTP server candidates"
msgstr "Candidati server NTP"
-msgid "NTP sync time-out"
-msgstr "Sincronizzazione NTP scaduta"
-
msgid "Name"
msgstr "Nome"
msgid "Optional"
msgstr ""
-msgid "Optional, specify to override default server (tic.sixxs.net)"
-msgstr ""
-
-msgid "Optional, use when the SIXXS account has more than one tunnel"
-msgstr ""
-
msgid ""
"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
"starting with <code>0x</code>."
msgid "Request IPv6-prefix of length"
msgstr "Richiede prefisso-IPv6 di lunghezza"
-msgid "Require TLS"
-msgstr "Richiede TLS"
-
msgid "Required"
msgstr "Richiesto"
msgid "Route type"
msgstr ""
-msgid "Routed IPv6 prefix for downstream interfaces"
-msgstr ""
-
msgid "Router Advertisement-Service"
msgstr ""
msgid "SHA256"
msgstr ""
-msgid ""
-"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) "
-"use 6in4 instead"
-msgstr ""
-
-msgid "SIXXS-handle[/Tunnel-ID]"
-msgstr ""
-
msgid "SNR"
msgstr ""
msgid "Server Settings"
msgstr "Impostazioni Server"
-msgid "Server password"
-msgstr ""
-
-msgid ""
-"Server password, enter the specific password of the tunnel when the username "
-"contains the tunnel ID"
-msgstr ""
-
-msgid "Server username"
-msgstr ""
-
msgid "Service Name"
msgstr ""
msgid "Source"
msgstr "Origine"
-msgid "Source routing"
-msgstr ""
-
msgid "Specifies the directory the device is attached to"
msgstr "Specifica la cartella a cui è collegato il dispositivo in"
"address of your computer to reach the device again, depending on your "
"settings."
-msgid ""
-"The tunnel end-point is behind NAT, defaults to disabled and only applies to "
-"AYIYA"
-msgstr ""
-
msgid ""
"The uploaded image file does not contain a supported format. Make sure that "
"you choose the generic image format for your platform."
msgid "Tunnel Link"
msgstr ""
-msgid "Tunnel broker protocol"
-msgstr ""
-
-msgid "Tunnel setup server"
-msgstr ""
-
-msgid "Tunnel type"
-msgstr ""
-
msgid "Tx-Power"
msgstr ""
msgid "Vendor Class to send when requesting DHCP"
msgstr "Classe del Produttore da 'inviare al momento della richiesta DHCP"
-msgid "Verbose"
-msgstr ""
-
-msgid "Verbose logging by aiccu daemon"
-msgstr ""
-
msgid "Verify"
msgstr "Verifica"
"La crittografia WPA richiede wpa_supplicant (per la modalità client) o "
"hostapd (per AP e modalità ad hoc) per essere installato."
-msgid ""
-"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)"
-msgstr ""
-"Attendi sincro NTP quei dati secondi, immetti 0 per disabilitare l'attesa "
-"(opzionale)"
-
msgid "Waiting for changes to be applied..."
msgstr "In attesa delle modifiche da applicare ..."
"communications"
msgstr ""
-msgid "Whether to create an IPv6 default route over the tunnel"
-msgstr ""
-
-msgid "Whether to route only packets from delegated prefixes"
-msgstr ""
-
msgid "Width"
msgstr ""
msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
msgstr "File <abbr title=\"Sistema Nome Dominio\">DNS</abbr> locale"
-msgid "minimum 1280, maximum 1480"
-msgstr ""
-
msgid "minutes"
msgstr ""
msgid "« Back"
msgstr "« Indietro"
-#~ msgid "Apply"
-#~ msgstr "Applica"
-
-#~ msgid "Applying changes"
-#~ msgstr "Applica modifiche"
-
-#~ msgid "Configuration applied."
-#~ msgstr "Configurazione salvata."
-
-#~ msgid "Save & Apply"
-#~ msgstr "Salva & Applica"
-
-#~ msgid "There are no pending changes to apply!"
-#~ msgstr "Non ci sono cambiamenti pendenti da applicare!"
-
-#~ msgid "Action"
-#~ msgstr "Azione"
-
-#~ msgid "Buttons"
-#~ msgstr "Pulsanti"
-
-#~ msgid "Handler"
-#~ msgstr "Gestore"
-
-#~ msgid "Maximum hold time"
-#~ msgstr "Tempo massimo di attesa"
-
-#~ msgid "Minimum hold time"
-#~ msgstr "Velocità minima"
-
-#~ msgid "Specifies the button state to handle"
-#~ msgstr "Specifica lo stato del pulsante da gestire"
-
-#~ msgid "Leasetime"
-#~ msgstr "Tempo di contratto"
-
-#, fuzzy
-#~ msgid "automatic"
-#~ msgstr "statico"
-
-#~ msgid "AR Support"
-#~ msgstr "Supporto AR"
-
-#~ msgid "Atheros 802.11%s Wireless Controller"
-#~ msgstr "Dispositivo Wireless Atheros 802.11%s"
-
-#~ msgid "Background Scan"
-#~ msgstr "Scansione in background"
-
-#~ msgid "Compression"
-#~ msgstr "Compressione"
-
-#~ msgid "Disable HW-Beacon timer"
-#~ msgstr "Disabilita Timer Beacon HW"
-
-#~ msgid "Do not send probe responses"
-#~ msgstr "Disabilita Probe-Responses"
-
-#~ msgid "Fast Frames"
-#~ msgstr "Frame veloci"
-
-#~ msgid "Maximum Rate"
-#~ msgstr "Velocità massima"
-
-#~ msgid "Minimum Rate"
-#~ msgstr "Velocità minima"
-
-#~ msgid "Multicast Rate"
-#~ msgstr "Velocità multicast"
-
-#~ msgid "Separate WDS"
-#~ msgstr "WDS separati"
-
-#~ msgid "Static WDS"
-#~ msgstr "WDS statico"
-
-#~ msgid "Turbo Mode"
-#~ msgstr "Modalità turbo"
-
-#~ msgid "XR Support"
-#~ msgstr "Supporto XR"
-
-#~ msgid "An additional network will be created if you leave this unchecked."
-#~ msgstr "Sarà creata una rete aggiuntiva se lasci questo senza spunta."
-
-#~ msgid "Join Network: Settings"
-#~ msgstr "Aggiunta Rete: Impostazioni"
-
-#~ msgid "CPU"
-#~ msgstr "CPU"
-
-#~ msgid "Port %d"
-#~ msgstr "Porta %d"
-
-#~ msgid "VLAN Interface"
-#~ msgstr "Interfaccia VLAN"
msgid "ADSL"
msgstr "ADSL"
-msgid "AICCU (SIXXS)"
-msgstr "AICCU (SIXXS)"
-
msgid "ANSI T1.413"
msgstr "ANSI T1.413"
msgid "ATU-C System Vendor ID"
msgstr ""
-msgid "AYIYA"
-msgstr ""
-
msgid "Access Concentrator"
msgstr "Access Concentrator"
msgid "Allowed IPs"
msgstr "許可されるIP"
-msgid ""
-"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
-"\">Tunneling Comparison</a> on SIXXS"
-msgstr ""
-
msgid "Always announce default router"
msgstr "常にデフォルト ルーターとして通知する"
msgid "Band"
msgstr ""
-msgid "Behind NAT"
-msgstr ""
-
msgid ""
"Below is the determined list of files to backup. It consists of changed "
"configuration files marked by opkg, essential base files and the user "
msgid "Connection Limit"
msgstr "接続制限"
-msgid "Connection to server fails when TLS cannot be used"
-msgstr "TLSが使用できないとき、サーバーへの接続は失敗します。"
-
msgid "Connections"
msgstr "ネットワーク接続"
"changes. You might need to reconnect if you modified network related "
"settings such as the IP address or wireless security credentials."
msgstr ""
-"設定の変更を適用後、デバイスへのアクセスを回復できませんでした。もし IP アドレスや"
-"無線のセキュリティ認証情報などのネットワーク関連の設定を変更した場合、"
+"設定の変更を適用後、デバイスへのアクセスを回復できませんでした。もし IP アド"
+"レスや無線のセキュリティ認証情報などのネットワーク関連の設定を変更した場合、"
"再接続が必要かもしれません。"
msgid "Country"
msgid "Default is stateless + stateful"
msgstr "デフォルトは ステートレス + ステートフル です。"
-msgid "Default route"
-msgstr "デフォルト ルート"
-
msgid "Default state"
msgstr "標準状態"
msgid "Header Error Code Errors (HEC)"
msgstr ""
-msgid "Heartbeat"
-msgstr "ハートビート"
-
msgid ""
"Here you can configure the basic aspects of your device like its hostname or "
"the timezone."
msgid "IPv6 address"
msgstr "IPv6 アドレス"
-msgid "IPv6 address delegated to the local tunnel endpoint (optional)"
-msgstr ""
-
msgid "IPv6 assignment hint"
msgstr ""
msgid "NTP server candidates"
msgstr "NTPサーバー候補"
-msgid "NTP sync time-out"
-msgstr "NTP 同期タイムアウト"
-
msgid "Name"
msgstr "名前"
msgid "Optional"
msgstr "オプション"
-msgid "Optional, specify to override default server (tic.sixxs.net)"
-msgstr ""
-
-msgid "Optional, use when the SIXXS account has more than one tunnel"
-msgstr ""
-
msgid ""
"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
"starting with <code>0x</code>."
msgid "Request IPv6-prefix of length"
msgstr "リクエストするIPv6-プレフィクス長"
-msgid "Require TLS"
-msgstr "TLSが必要"
-
msgid "Required"
msgstr "必須"
msgid "Route type"
msgstr "ルート タイプ"
-msgid "Routed IPv6 prefix for downstream interfaces"
-msgstr ""
-
msgid "Router Advertisement-Service"
msgstr "ルーター アドバタイズメント-サービス"
msgid "SHA256"
msgstr "SHA256"
-msgid ""
-"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) "
-"use 6in4 instead"
-msgstr ""
-
-msgid "SIXXS-handle[/Tunnel-ID]"
-msgstr ""
-
msgid "SNR"
msgstr "SNR"
msgid "Server Settings"
msgstr "サーバー設定"
-msgid "Server password"
-msgstr "サーバー パスワード"
-
-msgid ""
-"Server password, enter the specific password of the tunnel when the username "
-"contains the tunnel ID"
-msgstr ""
-
-msgid "Server username"
-msgstr "サーバー ユーザー名"
-
msgid "Service Name"
msgstr "サービス名"
msgid "Source"
msgstr "送信元"
-msgid "Source routing"
-msgstr ""
-
msgid "Specifies the directory the device is attached to"
msgstr "デバイスが接続するディレクトリを設定します"
"す。これは、安全上の理由によりロールバックされる設定に起因するものです。それ"
"でも設定の変更が正しいと思う場合は、チェックなしの変更の適用を行ってくださ"
"い。もしくは、再度適用を試行する前にこの警告を除去して設定内容の編集を行う"
-"か、現在動作している設定状況を維持するために未適用の変更を取り消してくだ"
-"ã\81\95ã\81\84ã\80\82"
+"か、現在動作している設定状況を維持するために未適用の変更を取り消してくださ"
+"い。"
msgid ""
"The device file of the memory or partition (<abbr title=\"for example\">e.g."
"わる可能性があるため、再接続時にあなたのコンピュータのIPアドレスを変更しなけ"
"ればならない場合があります。"
-msgid ""
-"The tunnel end-point is behind NAT, defaults to disabled and only applies to "
-"AYIYA"
-msgstr ""
-
msgid ""
"The uploaded image file does not contain a supported format. Make sure that "
"you choose the generic image format for your platform."
msgid "Tunnel Link"
msgstr "トンネルリンク"
-msgid "Tunnel broker protocol"
-msgstr "トンネルブローカー プロトコル"
-
-msgid "Tunnel setup server"
-msgstr "トンネルセットアップ サーバー"
-
-msgid "Tunnel type"
-msgstr "トンネルタイプ"
-
msgid "Tx-Power"
msgstr "送信電力"
msgid "Vendor Class to send when requesting DHCP"
msgstr "DHCPリクエスト送信時のベンダークラスを設定"
-msgid "Verbose"
-msgstr "詳細"
-
-msgid "Verbose logging by aiccu daemon"
-msgstr ""
-
msgid "Verify"
msgstr "確認"
"hostapd (アクセスポイント及びアドホック) がインストールされている必要がありま"
"す。"
-msgid ""
-"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)"
-msgstr ""
-
msgid "Waiting for changes to be applied..."
msgstr "変更を適用中です..."
"communications"
msgstr ""
-msgid "Whether to create an IPv6 default route over the tunnel"
-msgstr ""
-
-msgid "Whether to route only packets from delegated prefixes"
-msgstr ""
-
msgid "Width"
msgstr "帯域幅"
msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
msgstr "ローカル <abbr title=\"Domain Name System\">DNS</abbr>ファイル"
-msgid "minimum 1280, maximum 1480"
-msgstr "最小値 1280、最大値 1480"
-
msgid "minutes"
msgstr "分"
msgid "ADSL"
msgstr ""
-msgid "AICCU (SIXXS)"
-msgstr ""
-
msgid "ANSI T1.413"
msgstr ""
msgid "ATU-C System Vendor ID"
msgstr ""
-msgid "AYIYA"
-msgstr ""
-
msgid "Access Concentrator"
msgstr ""
msgid "Allowed IPs"
msgstr ""
-msgid ""
-"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
-"\">Tunneling Comparison</a> on SIXXS"
-msgstr ""
-
msgid "Always announce default router"
msgstr ""
msgid "Band"
msgstr ""
-msgid "Behind NAT"
-msgstr ""
-
msgid ""
"Below is the determined list of files to backup. It consists of changed "
"configuration files marked by opkg, essential base files and the user "
msgid "Connection Limit"
msgstr ""
-msgid "Connection to server fails when TLS cannot be used"
-msgstr ""
-
msgid "Connections"
msgstr "연결"
msgid "Default is stateless + stateful"
msgstr ""
-msgid "Default route"
-msgstr ""
-
msgid "Default state"
msgstr "기본 상태"
msgid "Header Error Code Errors (HEC)"
msgstr ""
-msgid "Heartbeat"
-msgstr ""
-
msgid ""
"Here you can configure the basic aspects of your device like its hostname or "
"the timezone."
msgid "IPv6 address"
msgstr ""
-msgid "IPv6 address delegated to the local tunnel endpoint (optional)"
-msgstr ""
-
msgid "IPv6 assignment hint"
msgstr ""
msgid "NTP server candidates"
msgstr "NTP 서버 목록"
-msgid "NTP sync time-out"
-msgstr ""
-
msgid "Name"
msgstr "이름"
msgid "Optional"
msgstr ""
-msgid "Optional, specify to override default server (tic.sixxs.net)"
-msgstr ""
-
-msgid "Optional, use when the SIXXS account has more than one tunnel"
-msgstr ""
-
msgid ""
"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
"starting with <code>0x</code>."
msgid "Request IPv6-prefix of length"
msgstr ""
-msgid "Require TLS"
-msgstr ""
-
msgid "Required"
msgstr ""
msgid "Route type"
msgstr ""
-msgid "Routed IPv6 prefix for downstream interfaces"
-msgstr ""
-
msgid "Router Advertisement-Service"
msgstr ""
msgid "SHA256"
msgstr ""
-msgid ""
-"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) "
-"use 6in4 instead"
-msgstr ""
-
-msgid "SIXXS-handle[/Tunnel-ID]"
-msgstr ""
-
msgid "SNR"
msgstr ""
msgid "Server Settings"
msgstr "서버 설정"
-msgid "Server password"
-msgstr ""
-
-msgid ""
-"Server password, enter the specific password of the tunnel when the username "
-"contains the tunnel ID"
-msgstr ""
-
-msgid "Server username"
-msgstr ""
-
msgid "Service Name"
msgstr ""
msgid "Source"
msgstr ""
-msgid "Source routing"
-msgstr ""
-
msgid "Specifies the directory the device is attached to"
msgstr ""
"settings."
msgstr ""
-msgid ""
-"The tunnel end-point is behind NAT, defaults to disabled and only applies to "
-"AYIYA"
-msgstr ""
-
msgid ""
"The uploaded image file does not contain a supported format. Make sure that "
"you choose the generic image format for your platform."
msgid "Tunnel Link"
msgstr ""
-msgid "Tunnel broker protocol"
-msgstr ""
-
-msgid "Tunnel setup server"
-msgstr ""
-
-msgid "Tunnel type"
-msgstr ""
-
msgid "Tx-Power"
msgstr ""
msgid "Vendor Class to send when requesting DHCP"
msgstr "DHCP 요청시 전송할 Vendor Class"
-msgid "Verbose"
-msgstr ""
-
-msgid "Verbose logging by aiccu daemon"
-msgstr ""
-
msgid "Verify"
msgstr ""
"and ad-hoc mode) to be installed."
msgstr ""
-msgid ""
-"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)"
-msgstr ""
-
msgid "Waiting for changes to be applied..."
msgstr "변경 사항이 적용되기를 기다리는 중입니다..."
"communications"
msgstr ""
-msgid "Whether to create an IPv6 default route over the tunnel"
-msgstr ""
-
-msgid "Whether to route only packets from delegated prefixes"
-msgstr ""
-
msgid "Width"
msgstr ""
msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
msgstr "local <abbr title=\"Domain Name System\">DNS</abbr> 파일"
-msgid "minimum 1280, maximum 1480"
-msgstr ""
-
msgid "minutes"
msgstr ""
msgid "ADSL"
msgstr ""
-msgid "AICCU (SIXXS)"
-msgstr ""
-
msgid "ANSI T1.413"
msgstr ""
msgid "ATU-C System Vendor ID"
msgstr ""
-msgid "AYIYA"
-msgstr ""
-
msgid "Access Concentrator"
msgstr ""
msgid "Allowed IPs"
msgstr ""
-msgid ""
-"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
-"\">Tunneling Comparison</a> on SIXXS"
-msgstr ""
-
msgid "Always announce default router"
msgstr ""
msgid "Band"
msgstr ""
-msgid "Behind NAT"
-msgstr ""
-
msgid ""
"Below is the determined list of files to backup. It consists of changed "
"configuration files marked by opkg, essential base files and the user "
msgid "Connection Limit"
msgstr "Sambungan Batas"
-msgid "Connection to server fails when TLS cannot be used"
-msgstr ""
-
msgid "Connections"
msgstr ""
msgid "Default is stateless + stateful"
msgstr ""
-msgid "Default route"
-msgstr ""
-
msgid "Default state"
msgstr ""
msgid "Header Error Code Errors (HEC)"
msgstr ""
-msgid "Heartbeat"
-msgstr ""
-
msgid ""
"Here you can configure the basic aspects of your device like its hostname or "
"the timezone."
msgid "IPv6 address"
msgstr ""
-msgid "IPv6 address delegated to the local tunnel endpoint (optional)"
-msgstr ""
-
msgid "IPv6 assignment hint"
msgstr ""
msgid "NTP server candidates"
msgstr ""
-msgid "NTP sync time-out"
-msgstr ""
-
msgid "Name"
msgstr "Nama"
msgid "Optional"
msgstr ""
-msgid "Optional, specify to override default server (tic.sixxs.net)"
-msgstr ""
-
-msgid "Optional, use when the SIXXS account has more than one tunnel"
-msgstr ""
-
msgid ""
"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
"starting with <code>0x</code>."
msgid "Request IPv6-prefix of length"
msgstr ""
-msgid "Require TLS"
-msgstr ""
-
msgid "Required"
msgstr ""
msgid "Route type"
msgstr ""
-msgid "Routed IPv6 prefix for downstream interfaces"
-msgstr ""
-
msgid "Router Advertisement-Service"
msgstr ""
msgid "SHA256"
msgstr ""
-msgid ""
-"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) "
-"use 6in4 instead"
-msgstr ""
-
-msgid "SIXXS-handle[/Tunnel-ID]"
-msgstr ""
-
msgid "SNR"
msgstr ""
msgid "Server Settings"
msgstr ""
-msgid "Server password"
-msgstr ""
-
-msgid ""
-"Server password, enter the specific password of the tunnel when the username "
-"contains the tunnel ID"
-msgstr ""
-
-msgid "Server username"
-msgstr ""
-
msgid "Service Name"
msgstr ""
msgid "Source"
msgstr "Sumber"
-msgid "Source routing"
-msgstr ""
-
msgid "Specifies the directory the device is attached to"
msgstr ""
"anda perlu mengemas kini alamat komputer anda untuk mencapai peranti lagi, "
"bergantung pada tetapan anda."
-msgid ""
-"The tunnel end-point is behind NAT, defaults to disabled and only applies to "
-"AYIYA"
-msgstr ""
-
msgid ""
"The uploaded image file does not contain a supported format. Make sure that "
"you choose the generic image format for your platform."
msgid "Tunnel Link"
msgstr ""
-msgid "Tunnel broker protocol"
-msgstr ""
-
-msgid "Tunnel setup server"
-msgstr ""
-
-msgid "Tunnel type"
-msgstr ""
-
msgid "Tx-Power"
msgstr ""
msgid "Vendor Class to send when requesting DHCP"
msgstr ""
-msgid "Verbose"
-msgstr ""
-
-msgid "Verbose logging by aiccu daemon"
-msgstr ""
-
msgid "Verify"
msgstr ""
"WPA-Enkripsi memerlukan pemohan wpa (untuk mod pelanggan) atau hostapd "
"(untuk AP dan mod ad-hoc) yang akan dipasangkan."
-msgid ""
-"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)"
-msgstr ""
-
msgid "Waiting for changes to be applied..."
msgstr ""
"communications"
msgstr ""
-msgid "Whether to create an IPv6 default route over the tunnel"
-msgstr ""
-
-msgid "Whether to route only packets from delegated prefixes"
-msgstr ""
-
msgid "Width"
msgstr ""
msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
msgstr "Fail DNS tempatan"
-msgid "minimum 1280, maximum 1480"
-msgstr ""
-
msgid "minutes"
msgstr ""
msgid "ADSL"
msgstr ""
-msgid "AICCU (SIXXS)"
-msgstr ""
-
msgid "ANSI T1.413"
msgstr ""
msgid "ATU-C System Vendor ID"
msgstr ""
-msgid "AYIYA"
-msgstr ""
-
msgid "Access Concentrator"
msgstr "Tilgangskonsentrator"
msgid "Allowed IPs"
msgstr ""
-msgid ""
-"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
-"\">Tunneling Comparison</a> on SIXXS"
-msgstr ""
-
msgid "Always announce default router"
msgstr ""
msgid "Band"
msgstr ""
-msgid "Behind NAT"
-msgstr ""
-
msgid ""
"Below is the determined list of files to backup. It consists of changed "
"configuration files marked by opkg, essential base files and the user "
msgid "Connection Limit"
msgstr "Tilkoblingsgrense (antall)"
-msgid "Connection to server fails when TLS cannot be used"
-msgstr ""
-
msgid "Connections"
msgstr "Tilkoblinger"
msgid "Default is stateless + stateful"
msgstr ""
-msgid "Default route"
-msgstr ""
-
msgid "Default state"
msgstr "Standard tilstand"
msgid "Header Error Code Errors (HEC)"
msgstr ""
-msgid "Heartbeat"
-msgstr ""
-
msgid ""
"Here you can configure the basic aspects of your device like its hostname or "
"the timezone."
msgid "IPv6 address"
msgstr "IPv6 adresse"
-msgid "IPv6 address delegated to the local tunnel endpoint (optional)"
-msgstr ""
-
msgid "IPv6 assignment hint"
msgstr ""
msgid "NTP server candidates"
msgstr "NTP server kandidater"
-msgid "NTP sync time-out"
-msgstr ""
-
msgid "Name"
msgstr "Navn"
msgid "Optional"
msgstr ""
-msgid "Optional, specify to override default server (tic.sixxs.net)"
-msgstr ""
-
-msgid "Optional, use when the SIXXS account has more than one tunnel"
-msgstr ""
-
msgid ""
"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
"starting with <code>0x</code>."
msgid "Request IPv6-prefix of length"
msgstr ""
-msgid "Require TLS"
-msgstr ""
-
msgid "Required"
msgstr ""
msgid "Route type"
msgstr ""
-msgid "Routed IPv6 prefix for downstream interfaces"
-msgstr ""
-
msgid "Router Advertisement-Service"
msgstr ""
msgid "SHA256"
msgstr ""
-msgid ""
-"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) "
-"use 6in4 instead"
-msgstr ""
-
-msgid "SIXXS-handle[/Tunnel-ID]"
-msgstr ""
-
msgid "SNR"
msgstr ""
msgid "Server Settings"
msgstr "Server Innstillinger"
-msgid "Server password"
-msgstr ""
-
-msgid ""
-"Server password, enter the specific password of the tunnel when the username "
-"contains the tunnel ID"
-msgstr ""
-
-msgid "Server username"
-msgstr ""
-
msgid "Service Name"
msgstr "Tjeneste navn"
msgid "Source"
msgstr "Kilde"
-msgid "Source routing"
-msgstr ""
-
msgid "Specifies the directory the device is attached to"
msgstr "Hvor lagrings enheten blir tilsluttet filsystemet (f.eks. /mnt/sda1)"
"du prøver å koble til igjen. Det kan være nødvendig å fornye ip-adressen til "
"datamaskinen din for å nå enheten på nytt. (avhengig av innstillingene dine)"
-msgid ""
-"The tunnel end-point is behind NAT, defaults to disabled and only applies to "
-"AYIYA"
-msgstr ""
-
msgid ""
"The uploaded image file does not contain a supported format. Make sure that "
"you choose the generic image format for your platform."
msgid "Tunnel Link"
msgstr ""
-msgid "Tunnel broker protocol"
-msgstr ""
-
-msgid "Tunnel setup server"
-msgstr ""
-
-msgid "Tunnel type"
-msgstr ""
-
msgid "Tx-Power"
msgstr "Tx-Styrke"
msgid "Vendor Class to send when requesting DHCP"
msgstr "Leverandør klasse som sendes ved DHCP spørring"
-msgid "Verbose"
-msgstr ""
-
-msgid "Verbose logging by aiccu daemon"
-msgstr ""
-
msgid "Verify"
msgstr "Bekreft"
"WPA-Kryptering krever at wpa_supplicant (for klient-modus) eller hostapd "
"(for AP og ad-hoc-modus) er installert."
-msgid ""
-"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)"
-msgstr ""
-
msgid "Waiting for changes to be applied..."
msgstr "Venter på at endringer utføres..."
"communications"
msgstr ""
-msgid "Whether to create an IPv6 default route over the tunnel"
-msgstr ""
-
-msgid "Whether to route only packets from delegated prefixes"
-msgstr ""
-
msgid "Width"
msgstr ""
msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
msgstr "lokal <abbr title=\"Domain Navn System\">DNS</abbr>-fil"
-msgid "minimum 1280, maximum 1480"
-msgstr ""
-
msgid "minutes"
msgstr ""
"<br/>Note: you need to manually restart the cron service if the crontab file "
"was empty before editing."
msgstr ""
-"<br/>Uwaga: musisz ręcznie zrestartować usługę cron, jeśli plik crontab "
-"był pusty przed edycją."
+"<br/>Uwaga: musisz ręcznie zrestartować usługę cron, jeśli plik crontab był "
+"pusty przed edycją."
msgid "A43C + J43 + A43"
msgstr ""
msgid "ADSL"
msgstr "ADSL"
-msgid "AICCU (SIXXS)"
-msgstr ""
-
msgid "ANSI T1.413"
msgstr ""
"Linux network interfaces which can be used in conjunction with DHCP or PPP "
"to dial into the provider network."
msgstr ""
-"Mosty ATM eksponują enkapsulowaną sieć Ethernet w połączeniach AAL5 jako wirtualne "
-"interfejsy sieciowe systemu Linux, które mogą być używane w połączeniu z protokołem "
-"DHCP lub PPP w celu polączenia się z siecią dostawcy."
+"Mosty ATM eksponują enkapsulowaną sieć Ethernet w połączeniach AAL5 jako "
+"wirtualne interfejsy sieciowe systemu Linux, które mogą być używane w "
+"połączeniu z protokołem DHCP lub PPP w celu polączenia się z siecią dostawcy."
msgid "ATM device number"
msgstr "Numer urządzenia ATM"
msgid "ATU-C System Vendor ID"
msgstr ""
-msgid "AYIYA"
-msgstr ""
-
# co to takiego?
msgid "Access Concentrator"
msgstr "Koncentrator dostępowy ATM"
msgid ""
"Allocate IP addresses sequentially, starting from the lowest available "
"address"
-msgstr "Przydziel sekwencyjnie adresy IP, zaczynając od najmniejszego dostępnego"
+msgstr ""
+"Przydziel sekwencyjnie adresy IP, zaczynając od najmniejszego dostępnego"
msgid "Allocate IP sequentially"
msgstr "Przydzielaj adresy IP po kolei"
msgstr "Pozwól tylko sobie (localhost)"
msgid "Allow remote hosts to connect to local SSH forwarded ports"
-msgstr "Zezwalaj zdalnym hostom na łączenie się z lokalnie przekazywanymi portami SSH"
+msgstr ""
+"Zezwalaj zdalnym hostom na łączenie się z lokalnie przekazywanymi portami SSH"
msgid "Allow root logins with password"
msgstr "Zezwól na logowanie roota przy pomocy hasła"
msgid "Allowed IPs"
msgstr "Dozwolone adresy IP"
-msgid ""
-"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
-"\">Tunneling Comparison</a> on SIXXS"
-msgstr ""
-
msgid "Always announce default router"
msgstr "Zawsze rozgłaszaj domyślny router"
msgid "Any zone"
msgstr "Dowolna strefa"
-msgid "Apply"
-msgstr "Zatwierdź"
+msgid "Apply request failed with status <code>%h</code>"
+msgstr ""
-msgid "Applying changes"
-msgstr "Wprowadzam zmiany"
+msgid "Apply unchecked"
+msgstr ""
msgid ""
"Assign a part of given length of every public IPv6-prefix to this interface"
msgid "Band"
msgstr ""
-msgid "Behind NAT"
-msgstr ""
-
msgid ""
"Below is the determined list of files to backup. It consists of changed "
"configuration files marked by opkg, essential base files and the user "
msgid "Changes applied."
msgstr "Zmiany zostały zastosowane."
+msgid "Changes have been reverted."
+msgstr ""
+
msgid "Changes the administrator password for accessing the device"
msgstr "Zmienia hasło administratora"
msgid "Channel"
msgstr "Kanał"
+msgid ""
+"Channel %d is not available in the %s regulatory domain and has been auto-"
+"adjusted to %d."
+msgstr ""
+
msgid "Check"
msgstr "Sprawdź"
"workaround might cause interoperability issues and reduced robustness of key "
"negotiation especially in environments with heavy traffic load."
msgstr ""
-"Komplikuje atak ponownej instalacji klucza po stronie klienta, wyłączając retransmisję ramek klucza EAPOL, które są używane do instalowania kluczy. To obejście może powodować problemy z interoperacyjnością i zmniejszoną odporność kluczowych negocjacji, szczególnie w środowiskach o dużym natężeniu ruchu."
+"Komplikuje atak ponownej instalacji klucza po stronie klienta, wyłączając "
+"retransmisję ramek klucza EAPOL, które są używane do instalowania kluczy. To "
+"obejście może powodować problemy z interoperacyjnością i zmniejszoną "
+"odporność kluczowych negocjacji, szczególnie w środowiskach o dużym "
+"natężeniu ruchu."
msgid "Configuration"
msgstr "Konfiguracja"
-msgid "Configuration applied."
-msgstr "Konfiguracja została zastosowana."
-
msgid "Configuration files will be kept."
msgstr "Pliki konfiguracyjne zostaną zachowane."
+msgid "Configuration has been applied."
+msgstr ""
+
+msgid "Configuration has been rolled back!"
+msgstr ""
+
msgid "Confirmation"
msgstr "Potwierdzenie"
msgid "Connection Limit"
msgstr "Limit połączeń"
-msgid "Connection to server fails when TLS cannot be used"
-msgstr ""
-
msgid "Connections"
msgstr "Połączenia"
+msgid ""
+"Could not regain access to the device after applying the configuration "
+"changes. You might need to reconnect if you modified network related "
+"settings such as the IP address or wireless security credentials."
+msgstr ""
+
msgid "Country"
msgstr "Kraj"
msgid "Default is stateless + stateful"
msgstr ""
-msgid "Default route"
-msgstr ""
-
msgid "Default state"
msgstr "Stan domyślny"
msgid "Device unreachable"
msgstr "Urządzenie nieosiągalne"
+msgid "Device unreachable!"
+msgstr ""
+
msgid "Diagnostics"
msgstr "Diagnostyka"
msgid "Discard upstream RFC1918 responses"
msgstr "Odrzuć wychodzące odpowiedzi RFC1918"
+msgid "Dismiss"
+msgstr ""
+
msgid "Displaying only packages containing"
msgstr "Pokazuję tylko paczki zawierające"
msgid ""
"Enable <abbr title=\"Internet Group Management Protocol\">IGMP</abbr> "
"snooping"
-msgstr "Włącz nasłuchiwanie <abbr title=\"Internet Group Management Protocol\">IGMP</abbr>"
+msgstr ""
+"Włącz nasłuchiwanie <abbr title=\"Internet Group Management Protocol\">IGMP</"
+"abbr>"
msgid "Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
msgstr "Włącz <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
msgid ""
"Enables fast roaming among access points that belong to the same Mobility "
"Domain"
-msgstr "Aktywuje szybki roaming pomiędzy punktami dostępowymi, które należą "
-"do tej samej domeny"
+msgstr ""
+"Aktywuje szybki roaming pomiędzy punktami dostępowymi, które należą do tej "
+"samej domeny"
msgid "Enables the Spanning Tree Protocol on this bridge"
msgstr ""
msgid "FT protocol"
msgstr ""
+msgid "Failed to confirm apply within %ds, waiting for rollback…"
+msgstr ""
+
msgid "File"
msgstr "Plik"
msgid "Header Error Code Errors (HEC)"
msgstr ""
-msgid "Heartbeat"
-msgstr ""
-
msgid ""
"Here you can configure the basic aspects of your device like its hostname or "
"the timezone."
msgid "IPv6 address"
msgstr "Adres IPv6"
-msgid "IPv6 address delegated to the local tunnel endpoint (optional)"
-msgstr ""
-
msgid "IPv6 assignment hint"
msgstr ""
msgstr "Instaluj"
msgid "Install iputils-traceroute6 for IPv6 traceroute"
-msgstr "Zainstaluj iputils-traceroute6 w celu skorzystania z traceroute dla iPv6"
+msgstr ""
+"Zainstaluj iputils-traceroute6 w celu skorzystania z traceroute dla iPv6"
msgid "Install package %q"
msgstr "Instaluj pakiet %q"
"Make sure to clone the root filesystem using something like the commands "
"below:"
msgstr ""
-"Upewnij się, że klonujesz główny system plików, używając czegoś podobnego "
-"do poleceń poniżej:"
+"Upewnij się, że klonujesz główny system plików, używając czegoś podobnego do "
+"poleceń poniżej:"
msgid "Manual"
msgstr ""
msgid "NTP server candidates"
msgstr "Lista serwerów NTP"
-msgid "NTP sync time-out"
-msgstr ""
-
msgid "Name"
msgstr "Nazwa"
msgid "Obfuscated Password"
msgstr ""
+msgid "Obtain IPv6-Address"
+msgstr ""
+
msgid "Off-State Delay"
msgstr "Zwłoka wyłączenia"
msgid "Optional"
msgstr "Opcjonalny"
-msgid "Optional, specify to override default server (tic.sixxs.net)"
-msgstr ""
-
-msgid "Optional, use when the SIXXS account has more than one tunnel"
-msgstr ""
-
msgid ""
"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
"starting with <code>0x</code>."
msgid "Request IPv6-prefix of length"
msgstr ""
-msgid "Require TLS"
-msgstr "Wymagaj TLS"
-
msgid "Required"
msgstr "Wymagany"
msgid "Revert"
msgstr "Przywróć"
+msgid "Revert changes"
+msgstr ""
+
+msgid "Revert request failed with status <code>%h</code>"
+msgstr ""
+
+msgid "Reverting configuration…"
+msgstr ""
+
msgid "Root"
msgstr "Root"
msgid "Route type"
msgstr ""
-msgid "Routed IPv6 prefix for downstream interfaces"
-msgstr ""
-
msgid "Router Advertisement-Service"
msgstr ""
msgid "SHA256"
msgstr ""
-msgid ""
-"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) "
-"use 6in4 instead"
-msgstr ""
-
-msgid "SIXXS-handle[/Tunnel-ID]"
-msgstr ""
-
msgid "SNR"
msgstr "SNR"
msgid "Save & Apply"
msgstr "Zapisz i zastosuj"
-msgid "Save & Apply"
-msgstr "Zapisz i zastosuj"
-
msgid "Scan"
msgstr "Skanuj"
msgid "Server Settings"
msgstr "Ustawienia serwera"
-msgid "Server password"
-msgstr ""
-
-msgid ""
-"Server password, enter the specific password of the tunnel when the username "
-"contains the tunnel ID"
-msgstr ""
-
-msgid "Server username"
-msgstr ""
-
msgid "Service Name"
msgstr "Nazwa serwisu"
"Set interface properties regardless of the link carrier (If set, carrier "
"sense events do not invoke hotplug handlers)."
msgstr ""
-"Ustaw właściwości interfejsu, niezależnie od operatora łącza (nie wpływa"
-" na programy operatora które ustanawiają połączenie)."
+"Ustaw właściwości interfejsu, niezależnie od operatora łącza (nie wpływa na "
+"programy operatora które ustanawiają połączenie)."
#, fuzzy
msgid "Set up Time Synchronization"
msgid "Source"
msgstr "Źródło"
-msgid "Source routing"
-msgstr ""
-
msgid "Specifies the directory the device is attached to"
msgstr "Podaje katalog do którego jest podłączone urządzenie"
msgid "Start priority"
msgstr "Priorytet uruchomienia"
+msgid "Starting configuration apply…"
+msgstr ""
+
msgid "Startup"
msgstr "Autostart"
msgid "The configuration file could not be loaded due to the following error:"
msgstr ""
+msgid ""
+"The device could not be reached within %d seconds after applying the pending "
+"changes, which caused the configuration to be rolled back for safety "
+"reasons. If you believe that the configuration changes are correct "
+"nonetheless, perform an unchecked configuration apply. Alternatively, you "
+"can dismiss this warning and edit changes before attempting to apply again, "
+"or revert all pending changes to keep the currently working configuration "
+"state."
+msgstr ""
+
msgid ""
"The device file of the memory or partition (<abbr title=\"for example\">e.g."
"</abbr> <code>/dev/sda1</code>)"
"upewnić się, że został przesłany poprawnie.<br /> Wciśnij \"Wykonaj\" aby "
"kontynuować aktualizację."
-msgid "The following changes have been committed"
-msgstr "Następujące zmiany zostały zatwierdzone"
-
msgid "The following changes have been reverted"
msgstr "Następujące zmiany zostały odrzucone"
"ustawień może być konieczne odnowienie adresu Twojego komputera, aby dostać "
"się do urządzenia."
-msgid ""
-"The tunnel end-point is behind NAT, defaults to disabled and only applies to "
-"AYIYA"
-msgstr ""
-
msgid ""
"The uploaded image file does not contain a supported format. Make sure that "
"you choose the generic image format for your platform."
msgid "There are no active leases."
msgstr "Brak aktywnych dzierżaw."
-msgid "There are no pending changes to apply!"
-msgstr "Brak oczekujących zmian do zastosowania!"
+msgid "There are no changes to apply."
+msgstr ""
msgid "There are no pending changes to revert!"
msgstr "Brak oczekujących zmian do przywrócenia!"
"To restore configuration files, you can upload a previously generated backup "
"archive here."
msgstr ""
-"Aby przywrócić pliki konfiguracyjne, możesz tutaj przesłać wcześniej utworzoną "
-"kopię zapasową."
+"Aby przywrócić pliki konfiguracyjne, możesz tutaj przesłać wcześniej "
+"utworzoną kopię zapasową."
msgid "Tone"
msgstr ""
msgid "Tunnel Link"
msgstr ""
-msgid "Tunnel broker protocol"
-msgstr ""
-
-msgid "Tunnel setup server"
-msgstr ""
-
-msgid "Tunnel type"
-msgstr "Typ tunelu"
-
msgid "Tx-Power"
msgstr "Moc nadawania"
"compatible firmware image)."
msgstr ""
"Prześlij tutaj obraz zgodny z funkcją sysupgrade, aby zastąpić aktualnie "
-"działające opragramowanie. Zaznacz opcję \"Zachowaj ustawienia\", aby zachować "
-"bieżącą konfigurację (wymagany obraz zgodny z bieżącym opragramowaniem)."
+"działające opragramowanie. Zaznacz opcję \"Zachowaj ustawienia\", aby "
+"zachować bieżącą konfigurację (wymagany obraz zgodny z bieżącym "
+"opragramowaniem)."
msgid "Upload archive..."
msgstr "Załaduj archiwum..."
msgid "Vendor Class to send when requesting DHCP"
msgstr "Klasa producenta do wysłania podczas żądania DHCP"
-msgid "Verbose"
-msgstr ""
-
-msgid "Verbose logging by aiccu daemon"
-msgstr ""
-
msgid "Verify"
msgstr "Zweryfikuj"
"WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP "
"and ad-hoc mode) to be installed."
msgstr ""
-"Kodowanie WPA wymaga zainstalowanych modułów wpa_supplicant (tryb "
-"klienta) lub hostapd (tryb AP lub ad-hoc)"
-
-msgid ""
-"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)"
-msgstr ""
+"Kodowanie WPA wymaga zainstalowanych modułów wpa_supplicant (tryb klienta) "
+"lub hostapd (tryb AP lub ad-hoc)"
msgid "Waiting for changes to be applied..."
msgstr "Trwa wprowadzenie zmian..."
msgid "Waiting for command to complete..."
msgstr "Trwa wykonanie polecenia..."
+msgid "Waiting for configuration to get applied… %ds"
+msgstr ""
+
msgid "Waiting for device..."
msgstr "Oczekiwanie na urządzenie..."
msgstr "Ostrzeżenie"
msgid "Warning: There are unsaved changes that will get lost on reboot!"
-msgstr "Ostrzeżenie: Istnieją niezapisane zmiany, które zostaną utracone "
-"po ponownym uruchomieniu urządzenia!"
+msgstr ""
+"Ostrzeżenie: Istnieją niezapisane zmiany, które zostaną utracone po ponownym "
+"uruchomieniu urządzenia!"
msgid ""
"When using a PSK, the PMK can be generated locally without inter AP "
"communications"
msgstr ""
-msgid "Whether to create an IPv6 default route over the tunnel"
-msgstr ""
-
-msgid "Whether to route only packets from delegated prefixes"
-msgstr ""
-
msgid "Width"
msgstr "Szerokość"
"upgrade it to at least version 7 or use another browser like Firefox, Opera "
"or Safari."
msgstr ""
-"Twój Internet Explorer jest za stary, aby poprawnie wyświetlić tę stronę"
-"zaktualizuj go do wersji co najmniej 7 lub użyj innej przeglądarki, takiej "
-"jak Firefox, Opera czy Safari".
+"Twój Internet Explorer jest za stary, aby poprawnie wyświetlić tę "
+"stronęzaktualizuj go do wersji co najmniej 7 lub użyj innej przeglądarki, "
+"takiej jak Firefox, Opera czy Safari."
msgid "any"
msgstr "dowolny"
msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
msgstr "lokalny plik <abbr title=\"Domain Name System\">DNS</abbr>"
-msgid "minimum 1280, maximum 1480"
-msgstr "minimum 1280, maksimum 1480"
-
msgid "minutes"
msgstr "minuty"
msgid "« Back"
msgstr "« Wróć"
-#~ msgid "Action"
-#~ msgstr "Akcja"
-
-#~ msgid "Buttons"
-#~ msgstr "Przyciski"
-
-#~ msgid "Handler"
-#~ msgstr "Uchwyt"
-
-#~ msgid "Maximum hold time"
-#~ msgstr "Maksymalny czas podtrzymania"
-
-#~ msgid "Minimum hold time"
-#~ msgstr "Minimalny czas podtrzymania"
-
-#~ msgid "Path to executable which handles the button event"
-#~ msgstr ""
-#~ "Ścieżka do pliku wykonywalnego, który obsługuje zdarzenie dla danego "
-#~ "przycisku"
-
-#~ msgid "Specifies the button state to handle"
-#~ msgstr "Określa zachowanie w zależności od stanu przycisku"
-
-#~ msgid "This page allows the configuration of custom button actions"
-#~ msgstr ""
-#~ "Poniższa strona umożliwia konfigurację działania niestandardowych "
-#~ "przycisków"
-
-#~ msgid "Leasetime"
-#~ msgstr "Czas dzierżawy"
-
-# Wydaje mi się że brakuje litery R...
-#~ msgid "AR Support"
-#~ msgstr "Wsparcie dla ARP"
-
-#~ msgid "Atheros 802.11%s Wireless Controller"
-#~ msgstr "Bezprzewodowy kontroler Atheros 802.11%s"
-
-#~ msgid "Background Scan"
-#~ msgstr "Skanowanie w tle"
-
-#~ msgid "Compression"
-#~ msgstr "Kompresja"
-
-#~ msgid "Disable HW-Beacon timer"
-#~ msgstr "Wyłącz zegar HW-Beacon"
-
-#~ msgid "Do not send probe responses"
-#~ msgstr "Nie wysyłaj ramek probe response"
-
-#~ msgid "Fast Frames"
-#~ msgstr "Szybkie ramki (Fast Frames)"
-
-#~ msgid "Maximum Rate"
-#~ msgstr "Maksymalna Szybkość"
-
-#~ msgid "Minimum Rate"
-#~ msgstr "Minimalna Szybkość"
-
-#~ msgid "Multicast Rate"
-#~ msgstr "Szybkość Multicast`u"
-
-#~ msgid "Outdoor Channels"
-#~ msgstr "Kanały zewnętrzne"
-
-#~ msgid "Regulatory Domain"
-#~ msgstr "Domena regulacji"
-
-#~ msgid "Separate WDS"
-#~ msgstr "Rozdziel WDS"
-
-#~ msgid "Static WDS"
-#~ msgstr "Statyczny WDS"
-
-#~ msgid "Turbo Mode"
-#~ msgstr "Tryb Turbo"
-
-#~ msgid "XR Support"
-#~ msgstr "Wsparcie XR"
-
-#~ msgid "An additional network will be created if you leave this unchecked."
-#~ msgstr ""
-#~ "Zostanie utworzona dodatkowa sieć jeśli zostawisz tą opcję niezaznaczoną."
-
-#~ msgid "Join Network: Settings"
-#~ msgstr "Przyłącz do sieci: Ustawienia"
-
-#~ msgid "CPU"
-#~ msgstr "CPU"
-
-#~ msgid "Port %d"
-#~ msgstr "Port %d"
-
-#~ msgid "Port %d is untagged in multiple VLANs!"
-#~ msgstr "Port %d jest nietagowany w wielu VLAN`ach!"
-
-#~ msgid "VLAN Interface"
-#~ msgstr "Interfejs VLAN"
"<abbr title=\"Assymetrical Digital Subscriber Line/Linha Digital Assimétrica "
"para Assinante\">ADSL</abbr>"
-msgid "AICCU (SIXXS)"
-msgstr ""
-"<abbr title=\"Automatic IPv6 Connectivity Client Utility/Utilitário Cliente "
-"de Conectividade IPv6 Automática\">AICCU (SIXXS)</abbr>"
-
msgid "ANSI T1.413"
msgstr "ANSI T1.413"
msgid "ATU-C System Vendor ID"
msgstr "Identificador de"
-msgid "AYIYA"
-msgstr "AYIYA"
-
msgid "Access Concentrator"
msgstr "Concentrador de Acesso"
msgid "Allowed IPs"
msgstr "Endereços IP autorizados"
-msgid ""
-"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
-"\">Tunneling Comparison</a> on SIXXS"
-msgstr ""
-"Veja também a <a href=\"https://www.sixxs.net/faq/connectivity/?"
-"faq=comparison\">Comparação de Tunelamentos</a> em SIXXS"
-
msgid "Always announce default router"
msgstr "Sempre anuncie o roteador padrão"
msgid "Band"
msgstr "Banda"
-msgid "Behind NAT"
-msgstr "Atrás da NAT"
-
msgid ""
"Below is the determined list of files to backup. It consists of changed "
"configuration files marked by opkg, essential base files and the user "
msgid "Connection Limit"
msgstr "Limite de conexão"
-msgid "Connection to server fails when TLS cannot be used"
-msgstr "A conexão para este servidor falhará quando o TLS não puder ser usado"
-
msgid "Connections"
msgstr "Conexões"
msgid "Default is stateless + stateful"
msgstr "O padrão é sem estado + com estado"
-msgid "Default route"
-msgstr "Rota padrão"
-
msgid "Default state"
msgstr "Estado padrão"
"Erros de Código de Erro de Cabeçalho (<abbr title=\"Header Error Code\">HEC</"
"abbr>)"
-msgid "Heartbeat"
-msgstr "Pulso de vida"
-
msgid ""
"Here you can configure the basic aspects of your device like its hostname or "
"the timezone."
msgid "IPv6 address"
msgstr "Endereço IPv6"
-msgid "IPv6 address delegated to the local tunnel endpoint (optional)"
-msgstr "Endereços IPv6 delegados para o ponta local do túnel (opcional)"
-
msgid "IPv6 assignment hint"
msgstr "Sugestão de atribuição IPv6"
msgid "NTP server candidates"
msgstr "Candidatos a servidor NTP"
-msgid "NTP sync time-out"
-msgstr "Tempo limite da sincronia do NTP"
-
msgid "Name"
msgstr "Nome"
msgid "Optional"
msgstr "Opcional"
-msgid "Optional, specify to override default server (tic.sixxs.net)"
-msgstr ""
-"Opcional, especifique para sobrescrever o servidor padrão (tic.sixxs.net)"
-
-msgid "Optional, use when the SIXXS account has more than one tunnel"
-msgstr "Opcional, para usar quando a conta SIXXS tem mais de um túnel"
-
msgid ""
"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
"starting with <code>0x</code>."
msgid "Request IPv6-prefix of length"
msgstr "Solicita prefixo IPv6 de tamanho"
-msgid "Require TLS"
-msgstr "Requer TLS"
-
msgid "Required"
msgstr "Necessário"
msgid "Route type"
msgstr "Tipo de rota"
-msgid "Routed IPv6 prefix for downstream interfaces"
-msgstr "Prefixo roteável IPv6 para interfaces internas"
-
msgid "Router Advertisement-Service"
msgstr "Serviço de Anúncio de Roteador"
msgid "SHA256"
msgstr "SHA256"
-msgid ""
-"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) "
-"use 6in4 instead"
-msgstr ""
-"O SIXXS suporta somente TIC. Use o 6in4 para túneis estáticos usando o "
-"protocolo IP 41 (RFC4213)"
-
-msgid "SIXXS-handle[/Tunnel-ID]"
-msgstr "Identificador do SIXXS[/Identificador do Túnel]"
-
msgid "SNR"
msgstr "SNR"
msgid "Server Settings"
msgstr "Configurações do Servidor"
-msgid "Server password"
-msgstr "Senha do servidor"
-
-msgid ""
-"Server password, enter the specific password of the tunnel when the username "
-"contains the tunnel ID"
-msgstr ""
-"Senha do servidor. Informe a senha para este túnel quando o nome do usuário "
-"contiver o identificador do túnel"
-
-msgid "Server username"
-msgstr "Usuário do servidor"
-
msgid "Service Name"
msgstr "Nome do Serviço"
msgid "Source"
msgstr "Origem"
-msgid "Source routing"
-msgstr "Roteamento pela origem"
-
msgid "Specifies the directory the device is attached to"
msgstr "Especifica o diretório que o dispositivo está conectado"
"da sua configuração, pode ser necessário renovar o endereço do seu "
"computador para poder conectar novamente ao roteador."
-msgid ""
-"The tunnel end-point is behind NAT, defaults to disabled and only applies to "
-"AYIYA"
-msgstr ""
-"O final do túnel está atrás de um NAT. Por padrão será desabilitado e "
-"somente se aplica a AYIYA"
-
msgid ""
"The uploaded image file does not contain a supported format. Make sure that "
"you choose the generic image format for your platform."
msgid "Tunnel Link"
msgstr "Enlace do túnel"
-msgid "Tunnel broker protocol"
-msgstr "Protocolo do agente do túnel"
-
-msgid "Tunnel setup server"
-msgstr "Servidor de configuração do túnel"
-
-msgid "Tunnel type"
-msgstr "Tipo de túnel"
-
msgid "Tx-Power"
msgstr "Potência de transmissão"
msgid "Vendor Class to send when requesting DHCP"
msgstr "Classe do fabricante para enviar quando requisitar o DHCP"
-msgid "Verbose"
-msgstr "Detalhado"
-
-msgid "Verbose logging by aiccu daemon"
-msgstr "Habilite registros detalhados do serviço AICCU"
-
msgid "Verify"
msgstr "Verificar"
"A cifragem WPA requer a instalação do wpa_supplicant (para modo cliente) ou "
"do hostapd (para modo AP ou ad-hoc)."
-msgid ""
-"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)"
-msgstr ""
-"Espere esta quantidade de segundos pela sincronia do NTP. Definindo como 0 "
-"desabilita a espera (opcional)"
-
msgid "Waiting for changes to be applied..."
msgstr "Esperando a aplicação das mudanças..."
"communications"
msgstr ""
-msgid "Whether to create an IPv6 default route over the tunnel"
-msgstr "Se deve criar uma rota padrão IPv6 sobre o túnel"
-
-msgid "Whether to route only packets from delegated prefixes"
-msgstr "Se deve rotear somente pacotes de prefixos delegados"
-
msgid "Width"
msgstr "Largura"
msgstr ""
"Arquivo local de <abbr title=\"Sistema de Nomes de Domínios\">DNS</abbr>"
-msgid "minimum 1280, maximum 1480"
-msgstr "mínimo 1280, máximo 1480"
-
msgid "minutes"
msgstr "minutos"
msgid "« Back"
msgstr "« Voltar"
-
-#~ msgid "Apply"
-#~ msgstr "Aplicar"
-
-#~ msgid "Applying changes"
-#~ msgstr "Aplicar as alterações"
-
-#~ msgid "Configuration applied."
-#~ msgstr "Configuração aplicada."
-
-#~ msgid "Save & Apply"
-#~ msgstr "Save & Aplicar"
-
-#~ msgid "The following changes have been committed"
-#~ msgstr "As seguintes mudanças foram aplicadas"
-
-#~ msgid "There are no pending changes to apply!"
-#~ msgstr "Não existem modificações pendentes para aplicar!"
-
-#~ msgid "Action"
-#~ msgstr "Ação"
-
-#~ msgid "Buttons"
-#~ msgstr "Botões"
-
-# Não sei que contexto isto está sendo usado
-#~ msgid "Handler"
-#~ msgstr "Responsável"
-
-# Desconheço o uso
-#~ msgid "Maximum hold time"
-#~ msgstr "Tempo máximo de espera"
-
-#~ msgid "Minimum hold time"
-#~ msgstr "Tempo mínimo de espera"
-
-#~ msgid "Path to executable which handles the button event"
-#~ msgstr "Caminho para o executável que trata o evento do botão"
-
-#~ msgid "Specifies the button state to handle"
-#~ msgstr "Especifica o estado do botão para ser tratado"
-
-#~ msgid "This page allows the configuration of custom button actions"
-#~ msgstr ""
-#~ "Esta página permite a configuração de ações personalizadas para os botões"
-
-#~ msgid "Leasetime"
-#~ msgstr "Tempo de atribuição do DHCP"
-
-#~ msgid "Optional."
-#~ msgstr "Opcional."
-
-#~ msgid "navigation Navigation"
-#~ msgstr "navegação Navegação"
-
-#~ msgid "skiplink1 Skip to navigation"
-#~ msgstr "skiplink1 Pular para a navegação"
-
-#~ msgid "skiplink2 Skip to content"
-#~ msgstr "skiplink2 Pular para o conteúdo"
-
-#~ msgid "AuthGroup"
-#~ msgstr "Grupo de Autenticação"
-
-#~ msgid "automatic"
-#~ msgstr "automático"
-
-#~ msgid "AR Support"
-#~ msgstr "Suporte AR"
-
-#~ msgid "Atheros 802.11%s Wireless Controller"
-#~ msgstr "Controlador Wireless Atheros 802.11%s"
-
-#~ msgid "Background Scan"
-#~ msgstr "Busca em Segundo Plano"
-
-#~ msgid "Compression"
-#~ msgstr "Compressão"
-
-#~ msgid "Disable HW-Beacon timer"
-#~ msgstr "Desativar temporizador de Beacon de Hardware"
-
-#~ msgid "Do not send probe responses"
-#~ msgstr "Não enviar respostas de exames"
-
-#~ msgid "Fast Frames"
-#~ msgstr "Quadros Rápidos"
-
-#~ msgid "Maximum Rate"
-#~ msgstr "Taxa Máxima"
-
-#~ msgid "Minimum Rate"
-#~ msgstr "Taxa Mínima"
-
-#~ msgid "Multicast Rate"
-#~ msgstr "Taxa de Multicast"
-
-#~ msgid "Outdoor Channels"
-#~ msgstr "Canais para externo"
-
-#~ msgid "Regulatory Domain"
-#~ msgstr "Domínio Regulatório"
-
-#~ msgid "Separate WDS"
-#~ msgstr "Separar WDS"
-
-#~ msgid "Static WDS"
-#~ msgstr "WDS Estático"
-
-#~ msgid "Turbo Mode"
-#~ msgstr "Modo Turbo"
-
-#~ msgid "XR Support"
-#~ msgstr "Suporte a XR"
-
-#~ msgid "An additional network will be created if you leave this unchecked."
-#~ msgstr "Uma rede adicional será criada se você deixar isto desmarcado."
-
-#~ msgid "Join Network: Settings"
-#~ msgstr "Conectar à Rede: Configurações"
-
-#~ msgid "CPU"
-#~ msgstr "CPU"
-
-#~ msgid "Port %d"
-#~ msgstr "Porta %d"
-
-#~ msgid "Port %d is untagged in multiple VLANs!"
-#~ msgstr "Porta %d está sem etiqueta para mútliplas VLANs!"
-
-#~ msgid "VLAN Interface"
-#~ msgstr "Interface VLAN"
msgid "ADSL"
msgstr ""
-msgid "AICCU (SIXXS)"
-msgstr ""
-
msgid "ANSI T1.413"
msgstr ""
msgid "ATU-C System Vendor ID"
msgstr ""
-msgid "AYIYA"
-msgstr ""
-
msgid "Access Concentrator"
msgstr "Concentrador de Acesso"
msgid "Allowed IPs"
msgstr ""
-msgid ""
-"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
-"\">Tunneling Comparison</a> on SIXXS"
-msgstr ""
-
msgid "Always announce default router"
msgstr ""
msgid "Band"
msgstr ""
-msgid "Behind NAT"
-msgstr ""
-
msgid ""
"Below is the determined list of files to backup. It consists of changed "
"configuration files marked by opkg, essential base files and the user "
msgid "Connection Limit"
msgstr "Limite de Ligações"
-msgid "Connection to server fails when TLS cannot be used"
-msgstr ""
-
msgid "Connections"
msgstr "Ligações"
msgid "Default is stateless + stateful"
msgstr ""
-msgid "Default route"
-msgstr ""
-
msgid "Default state"
msgstr "Estado predefinido"
msgid "Header Error Code Errors (HEC)"
msgstr ""
-msgid "Heartbeat"
-msgstr ""
-
msgid ""
"Here you can configure the basic aspects of your device like its hostname or "
"the timezone."
msgid "IPv6 address"
msgstr "Endereço IPv6"
-msgid "IPv6 address delegated to the local tunnel endpoint (optional)"
-msgstr ""
-
msgid "IPv6 assignment hint"
msgstr ""
msgid "NTP server candidates"
msgstr "Candidatos a servidor NTP"
-msgid "NTP sync time-out"
-msgstr ""
-
msgid "Name"
msgstr "Nome"
msgid "Optional"
msgstr ""
-msgid "Optional, specify to override default server (tic.sixxs.net)"
-msgstr ""
-
-msgid "Optional, use when the SIXXS account has more than one tunnel"
-msgstr ""
-
msgid ""
"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
"starting with <code>0x</code>."
msgid "Request IPv6-prefix of length"
msgstr ""
-msgid "Require TLS"
-msgstr ""
-
msgid "Required"
msgstr ""
msgid "Route type"
msgstr ""
-msgid "Routed IPv6 prefix for downstream interfaces"
-msgstr ""
-
msgid "Router Advertisement-Service"
msgstr ""
msgid "SHA256"
msgstr ""
-msgid ""
-"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) "
-"use 6in4 instead"
-msgstr ""
-
-msgid "SIXXS-handle[/Tunnel-ID]"
-msgstr ""
-
msgid "SNR"
msgstr ""
msgid "Server Settings"
msgstr ""
-msgid "Server password"
-msgstr ""
-
-msgid ""
-"Server password, enter the specific password of the tunnel when the username "
-"contains the tunnel ID"
-msgstr ""
-
-msgid "Server username"
-msgstr ""
-
msgid "Service Name"
msgstr "Nome do Serviço"
msgid "Source"
msgstr "Origem"
-msgid "Source routing"
-msgstr ""
-
msgid "Specifies the directory the device is attached to"
msgstr ""
"da sua configuração, ode ser necessário renovar o endereço do seu computador "
"para poder ligar novamente ao router."
-msgid ""
-"The tunnel end-point is behind NAT, defaults to disabled and only applies to "
-"AYIYA"
-msgstr ""
-
msgid ""
"The uploaded image file does not contain a supported format. Make sure that "
"you choose the generic image format for your platform."
msgid "Tunnel Link"
msgstr ""
-msgid "Tunnel broker protocol"
-msgstr ""
-
-msgid "Tunnel setup server"
-msgstr ""
-
-msgid "Tunnel type"
-msgstr ""
-
msgid "Tx-Power"
msgstr "Potência de Tx"
msgid "Vendor Class to send when requesting DHCP"
msgstr ""
-msgid "Verbose"
-msgstr ""
-
-msgid "Verbose logging by aiccu daemon"
-msgstr ""
-
msgid "Verify"
msgstr "Verificar"
"A encriptação-WPA necessita do wpa_supplicant (para modo cliente) ou do "
"hostapd (para modo AP ou ah-hoc) esteja instalado."
-msgid ""
-"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)"
-msgstr ""
-
msgid "Waiting for changes to be applied..."
msgstr "A aguardar que as mudanças sejam aplicadas..."
"communications"
msgstr ""
-msgid "Whether to create an IPv6 default route over the tunnel"
-msgstr ""
-
-msgid "Whether to route only packets from delegated prefixes"
-msgstr ""
-
msgid "Width"
msgstr ""
msgstr ""
"Ficheiro local de <abbr title=\"Sistema de Nomes de Domínios\">DNS</abbr>"
-msgid "minimum 1280, maximum 1480"
-msgstr ""
-
msgid "minutes"
msgstr ""
msgid "ADSL"
msgstr ""
-msgid "AICCU (SIXXS)"
-msgstr ""
-
msgid "ANSI T1.413"
msgstr ""
msgid "ATU-C System Vendor ID"
msgstr ""
-msgid "AYIYA"
-msgstr ""
-
msgid "Access Concentrator"
msgstr "Concentrator de Access "
msgid "Allowed IPs"
msgstr ""
-msgid ""
-"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
-"\">Tunneling Comparison</a> on SIXXS"
-msgstr ""
-
msgid "Always announce default router"
msgstr ""
msgid "Band"
msgstr ""
-msgid "Behind NAT"
-msgstr ""
-
msgid ""
"Below is the determined list of files to backup. It consists of changed "
"configuration files marked by opkg, essential base files and the user "
msgid "Connection Limit"
msgstr "Limita de conexiune"
-msgid "Connection to server fails when TLS cannot be used"
-msgstr ""
-
msgid "Connections"
msgstr "Conexiuni"
msgid "Default is stateless + stateful"
msgstr ""
-msgid "Default route"
-msgstr ""
-
msgid "Default state"
msgstr "Stare implicita"
msgid "Header Error Code Errors (HEC)"
msgstr ""
-msgid "Heartbeat"
-msgstr ""
-
msgid ""
"Here you can configure the basic aspects of your device like its hostname or "
"the timezone."
msgid "IPv6 address"
msgstr "Adresa IPv6"
-msgid "IPv6 address delegated to the local tunnel endpoint (optional)"
-msgstr ""
-
msgid "IPv6 assignment hint"
msgstr ""
msgid "NTP server candidates"
msgstr ""
-msgid "NTP sync time-out"
-msgstr ""
-
msgid "Name"
msgstr "Nume"
msgid "Optional"
msgstr ""
-msgid "Optional, specify to override default server (tic.sixxs.net)"
-msgstr ""
-
-msgid "Optional, use when the SIXXS account has more than one tunnel"
-msgstr ""
-
msgid ""
"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
"starting with <code>0x</code>."
msgid "Request IPv6-prefix of length"
msgstr ""
-msgid "Require TLS"
-msgstr ""
-
msgid "Required"
msgstr ""
msgid "Route type"
msgstr ""
-msgid "Routed IPv6 prefix for downstream interfaces"
-msgstr ""
-
msgid "Router Advertisement-Service"
msgstr ""
msgid "SHA256"
msgstr ""
-msgid ""
-"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) "
-"use 6in4 instead"
-msgstr ""
-
-msgid "SIXXS-handle[/Tunnel-ID]"
-msgstr ""
-
msgid "SNR"
msgstr ""
msgid "Server Settings"
msgstr "Setarile serverului"
-msgid "Server password"
-msgstr ""
-
-msgid ""
-"Server password, enter the specific password of the tunnel when the username "
-"contains the tunnel ID"
-msgstr ""
-
-msgid "Server username"
-msgstr ""
-
msgid "Service Name"
msgstr "Nume serviciu"
msgid "Source"
msgstr "Sursa"
-msgid "Source routing"
-msgstr ""
-
msgid "Specifies the directory the device is attached to"
msgstr ""
"settings."
msgstr ""
-msgid ""
-"The tunnel end-point is behind NAT, defaults to disabled and only applies to "
-"AYIYA"
-msgstr ""
-
msgid ""
"The uploaded image file does not contain a supported format. Make sure that "
"you choose the generic image format for your platform."
msgid "Tunnel Link"
msgstr ""
-msgid "Tunnel broker protocol"
-msgstr ""
-
-msgid "Tunnel setup server"
-msgstr ""
-
-msgid "Tunnel type"
-msgstr ""
-
msgid "Tx-Power"
msgstr "Puterea TX"
msgid "Vendor Class to send when requesting DHCP"
msgstr ""
-msgid "Verbose"
-msgstr ""
-
-msgid "Verbose logging by aiccu daemon"
-msgstr ""
-
msgid "Verify"
msgstr ""
"Criptarea WPA necesita wpa_supplicant (pentru modul client) sau hostapd "
"(pentru modul AP sau ad-hoc) instalate."
-msgid ""
-"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)"
-msgstr ""
-
msgid "Waiting for changes to be applied..."
msgstr ""
"communications"
msgstr ""
-msgid "Whether to create an IPv6 default route over the tunnel"
-msgstr ""
-
-msgid "Whether to route only packets from delegated prefixes"
-msgstr ""
-
msgid "Width"
msgstr ""
msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
msgstr ""
-msgid "minimum 1280, maximum 1480"
-msgstr ""
-
msgid "minutes"
msgstr ""
msgid "ADSL"
msgstr "ADSL"
-msgid "AICCU (SIXXS)"
-msgstr "AICCU (SIXXS)"
-
msgid "ANSI T1.413"
msgstr "ANSI T1.413"
msgid "ATU-C System Vendor ID"
msgstr "ATU-C System Vendor ID"
-msgid "AYIYA"
-msgstr "AYIYA"
-
msgid "Access Concentrator"
msgstr "Концентратор доступа"
msgid "Allowed IPs"
msgstr "Разрешенные IP-адреса"
-msgid ""
-"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
-"\">Tunneling Comparison</a> on SIXXS"
-msgstr ""
-"Также смотрите <a href=\"https://www.sixxs.net/faq/connectivity/?"
-"faq=comparison\">Tunneling Comparison</a> on SIXXS"
-
msgid "Always announce default router"
msgstr "Объявлять всегда, как дефолтный маршрутизатор"
msgid "Band"
msgstr "Диапазон"
-msgid "Behind NAT"
-msgstr "За NAT-ом"
-
msgid ""
"Below is the determined list of files to backup. It consists of changed "
"configuration files marked by opkg, essential base files and the user "
msgid "Connection Limit"
msgstr "Ограничение соединений"
-msgid "Connection to server fails when TLS cannot be used"
-msgstr "Связь с сервером прерывается, когда TLS не может быть использован"
-
msgid "Connections"
msgstr "Соединения"
msgid "Default is stateless + stateful"
msgstr "Значение по умолчанию - 'stateless + stateful'."
-msgid "Default route"
-msgstr "Маршрут по умолчанию"
-
msgid "Default state"
msgstr "Начальное состояние"
msgid "Header Error Code Errors (HEC)"
msgstr "Ошибки кода ошибки заголовка (HEC)"
-msgid "Heartbeat"
-msgstr "Heartbeat"
-
msgid ""
"Here you can configure the basic aspects of your device like its hostname or "
"the timezone."
msgid "IPv6 address"
msgstr "IPv6-адрес"
-msgid "IPv6 address delegated to the local tunnel endpoint (optional)"
-msgstr ""
-"IPv6-адрес, делегированный локальной конечной точке туннеля (необязательно)."
-
msgid "IPv6 assignment hint"
msgstr "IPv6 подсказка присвоения"
msgid "NTP server candidates"
msgstr "Список NTP-серверов"
-msgid "NTP sync time-out"
-msgstr "NTP синхронизация времени ожидания"
-
msgid "Name"
msgstr "Имя"
msgid "Optional"
msgstr "Необязательно"
-msgid "Optional, specify to override default server (tic.sixxs.net)"
-msgstr ""
-"Необязательно. Укажите, чтобы переопределить дефолтный сервер (tic.sixxs."
-"net)."
-
-msgid "Optional, use when the SIXXS account has more than one tunnel"
-msgstr ""
-"Необязательно. Используется, когда учетная запись SIXXS имеет более одного "
-"туннеля."
-
msgid ""
"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
"starting with <code>0x</code>."
msgid "Request IPv6-prefix of length"
msgstr "Запрос IPv6 префикс длины"
-msgid "Require TLS"
-msgstr "Требовать TLS"
-
msgid "Required"
msgstr "Требовать"
msgid "Route type"
msgstr "Тип маршрута"
-msgid "Routed IPv6 prefix for downstream interfaces"
-msgstr "Префикс маршрутизации IPv6 для интерфейсов внутренней сети"
-
msgid "Router Advertisement-Service"
msgstr "Доступные<br />режимы работы"
msgid "SHA256"
msgstr "SHA256"
-msgid ""
-"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) "
-"use 6in4 instead"
-msgstr ""
-"SIXXS поддерживает только TIC, для статических туннелей с использованием IP-"
-"протокола 41 (RFC4213) используется вместо 6in4."
-
-msgid "SIXXS-handle[/Tunnel-ID]"
-msgstr "SIXXS-управление[/Туннель-ID]"
-
msgid "SNR"
msgstr "SNR"
msgid "Server Settings"
msgstr "Настройки сервера"
-msgid "Server password"
-msgstr "Пароль доступа к серверу"
-
-msgid ""
-"Server password, enter the specific password of the tunnel when the username "
-"contains the tunnel ID"
-msgstr ""
-"Пароль сервера. Введите пароль из тоннеля, когда имя пользователя содержит "
-"ID туннеля."
-
-msgid "Server username"
-msgstr "Логин доступа к серверу"
-
msgid "Service Name"
msgstr "Имя службы"
msgid "Source"
msgstr "Источник"
-msgid "Source routing"
-msgstr "маршрутизация от источника"
-
msgid "Specifies the directory the device is attached to"
msgstr "Папка, к которой монтируется раздел устройства."
"потребуется обновить адрес компьютера, чтобы снова подключится к устройству, "
"в зависимости от настроек."
-msgid ""
-"The tunnel end-point is behind NAT, defaults to disabled and only applies to "
-"AYIYA"
-msgstr ""
-"Конечная точка туннеля находится за NAT, по умолчанию отключена и "
-"применяется только к AYIYA."
-
msgid ""
"The uploaded image file does not contain a supported format. Make sure that "
"you choose the generic image format for your platform."
msgid "Tunnel Link"
msgstr "Ссылка на туннель"
-msgid "Tunnel broker protocol"
-msgstr "Протокол посредника туннеля"
-
-msgid "Tunnel setup server"
-msgstr "Сервер настройки туннеля"
-
-msgid "Tunnel type"
-msgstr "Тип туннеля"
-
msgid "Tx-Power"
msgstr "Мощность передатчика"
msgstr ""
"Класс производителя (Vendor class), который отправлять при DHCP-запросах"
-msgid "Verbose"
-msgstr "Verbose"
-
-msgid "Verbose logging by aiccu daemon"
-msgstr "Verbose ведение журнала демоном aiccu"
-
msgid "Verify"
msgstr "Проверить"
"Необходимо установить wpa_supplicant (режим клиента) или hostapd (режим "
"точки доступа или ad-hoc) для поддержки шифрования WPA."
-msgid ""
-"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)"
-msgstr ""
-"Задать время ожидания синхронизации NTP, установка значения - '0', отключает "
-"ожидание (необязательно)."
-
msgid "Waiting for changes to be applied..."
msgstr "Ожидание применения изменений..."
"communications"
msgstr "При использовании PSK, PMK может быть создан локально, без AP в связи."
-msgid "Whether to create an IPv6 default route over the tunnel"
-msgstr "Создание маршрута по умолчанию IPv6 через туннель."
-
-msgid "Whether to route only packets from delegated prefixes"
-msgstr "Маршрутизация только пакетов из делегированных префиксов."
-
msgid "Width"
msgstr "Ширина"
msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
msgstr "Локальный <abbr title=\"Служба доменных имён\">DNS</abbr>-файл."
-msgid "minimum 1280, maximum 1480"
-msgstr "минимум 1280, максимум 1480"
-
msgid "minutes"
msgstr "минут(ы)"
msgid "« Back"
msgstr "« Назад"
-
-#~ msgid "Apply"
-#~ msgstr "Принять"
-
-#~ msgid "Applying changes"
-#~ msgstr "Применение изменений"
-
-#~ msgid "Configuration applied."
-#~ msgstr "Изменение настроек config файлов."
-
-#~ msgid "Save & Apply"
-#~ msgstr "Сохранить и применить"
-
-#~ msgid "The following changes have been committed"
-#~ msgstr "Ваши настройки были применены."
-
-#~ msgid "There are no pending changes to apply!"
-#~ msgstr "Нет изменений, которые можно применить!"
msgid "ADSL"
msgstr ""
-msgid "AICCU (SIXXS)"
-msgstr ""
-
msgid "ANSI T1.413"
msgstr ""
msgid "ATU-C System Vendor ID"
msgstr ""
-msgid "AYIYA"
-msgstr ""
-
msgid "Access Concentrator"
msgstr ""
msgid "Allowed IPs"
msgstr ""
-msgid ""
-"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
-"\">Tunneling Comparison</a> on SIXXS"
-msgstr ""
-
msgid "Always announce default router"
msgstr ""
msgid "Band"
msgstr ""
-msgid "Behind NAT"
-msgstr ""
-
msgid ""
"Below is the determined list of files to backup. It consists of changed "
"configuration files marked by opkg, essential base files and the user "
msgid "Connection Limit"
msgstr ""
-msgid "Connection to server fails when TLS cannot be used"
-msgstr ""
-
msgid "Connections"
msgstr ""
msgid "Default is stateless + stateful"
msgstr ""
-msgid "Default route"
-msgstr ""
-
msgid "Default state"
msgstr ""
msgid "Header Error Code Errors (HEC)"
msgstr ""
-msgid "Heartbeat"
-msgstr ""
-
msgid ""
"Here you can configure the basic aspects of your device like its hostname or "
"the timezone."
msgid "IPv6 address"
msgstr ""
-msgid "IPv6 address delegated to the local tunnel endpoint (optional)"
-msgstr ""
-
msgid "IPv6 assignment hint"
msgstr ""
msgid "NTP server candidates"
msgstr ""
-msgid "NTP sync time-out"
-msgstr ""
-
msgid "Name"
msgstr ""
msgid "Optional"
msgstr ""
-msgid "Optional, specify to override default server (tic.sixxs.net)"
-msgstr ""
-
-msgid "Optional, use when the SIXXS account has more than one tunnel"
-msgstr ""
-
msgid ""
"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
"starting with <code>0x</code>."
msgid "Request IPv6-prefix of length"
msgstr ""
-msgid "Require TLS"
-msgstr ""
-
msgid "Required"
msgstr ""
msgid "Route type"
msgstr ""
-msgid "Routed IPv6 prefix for downstream interfaces"
-msgstr ""
-
msgid "Router Advertisement-Service"
msgstr ""
msgid "SHA256"
msgstr ""
-msgid ""
-"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) "
-"use 6in4 instead"
-msgstr ""
-
-msgid "SIXXS-handle[/Tunnel-ID]"
-msgstr ""
-
msgid "SNR"
msgstr ""
msgid "Server Settings"
msgstr ""
-msgid "Server password"
-msgstr ""
-
-msgid ""
-"Server password, enter the specific password of the tunnel when the username "
-"contains the tunnel ID"
-msgstr ""
-
-msgid "Server username"
-msgstr ""
-
msgid "Service Name"
msgstr ""
msgid "Source"
msgstr ""
-msgid "Source routing"
-msgstr ""
-
msgid "Specifies the directory the device is attached to"
msgstr ""
"settings."
msgstr ""
-msgid ""
-"The tunnel end-point is behind NAT, defaults to disabled and only applies to "
-"AYIYA"
-msgstr ""
-
msgid ""
"The uploaded image file does not contain a supported format. Make sure that "
"you choose the generic image format for your platform."
msgid "Tunnel Link"
msgstr ""
-msgid "Tunnel broker protocol"
-msgstr ""
-
-msgid "Tunnel setup server"
-msgstr ""
-
-msgid "Tunnel type"
-msgstr ""
-
msgid "Tx-Power"
msgstr ""
msgid "Vendor Class to send when requesting DHCP"
msgstr ""
-msgid "Verbose"
-msgstr ""
-
-msgid "Verbose logging by aiccu daemon"
-msgstr ""
-
msgid "Verify"
msgstr ""
"and ad-hoc mode) to be installed."
msgstr ""
-msgid ""
-"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)"
-msgstr ""
-
msgid "Waiting for changes to be applied..."
msgstr ""
"communications"
msgstr ""
-msgid "Whether to create an IPv6 default route over the tunnel"
-msgstr ""
-
-msgid "Whether to route only packets from delegated prefixes"
-msgstr ""
-
msgid "Width"
msgstr ""
msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
msgstr ""
-msgid "minimum 1280, maximum 1480"
-msgstr ""
-
msgid "minutes"
msgstr ""
msgid "ADSL"
msgstr "ADSL"
-msgid "AICCU (SIXXS)"
-msgstr "AICCU (SIXXS)"
-
msgid "ANSI T1.413"
msgstr "ANSI T1.413"
msgid "ATU-C System Vendor ID"
msgstr ""
-msgid "AYIYA"
-msgstr "AYIYA"
-
msgid "Access Concentrator"
msgstr ""
msgid "Allowed IPs"
msgstr "Tillåtna IP-adresser"
-msgid ""
-"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
-"\">Tunneling Comparison</a> on SIXXS"
-msgstr ""
-
msgid "Always announce default router"
msgstr ""
msgid "Band"
msgstr "Band"
-msgid "Behind NAT"
-msgstr "Bakom NAT"
-
msgid ""
"Below is the determined list of files to backup. It consists of changed "
"configuration files marked by opkg, essential base files and the user "
msgid "Connection Limit"
msgstr "Anslutningsgräns"
-msgid "Connection to server fails when TLS cannot be used"
-msgstr ""
-
msgid "Connections"
msgstr "Anslutningar"
msgid "Default is stateless + stateful"
msgstr ""
-msgid "Default route"
-msgstr "Standardrutt"
-
msgid "Default state"
msgstr ""
msgid "Header Error Code Errors (HEC)"
msgstr ""
-msgid "Heartbeat"
-msgstr "Hjärtslag"
-
msgid ""
"Here you can configure the basic aspects of your device like its hostname or "
"the timezone."
msgid "IPv6 address"
msgstr "IPv6-adress"
-msgid "IPv6 address delegated to the local tunnel endpoint (optional)"
-msgstr ""
-
msgid "IPv6 assignment hint"
msgstr ""
msgid "NTP server candidates"
msgstr "NTP-serverkandidater"
-msgid "NTP sync time-out"
-msgstr ""
-
msgid "Name"
msgstr "Namn"
msgid "Optional"
msgstr "Valfri"
-msgid "Optional, specify to override default server (tic.sixxs.net)"
-msgstr ""
-
-msgid "Optional, use when the SIXXS account has more than one tunnel"
-msgstr ""
-
msgid ""
"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
"starting with <code>0x</code>."
msgid "Request IPv6-prefix of length"
msgstr ""
-msgid "Require TLS"
-msgstr "Kräv TLS"
-
msgid "Required"
msgstr "Krävs!"
msgid "Route type"
msgstr "Typ av rutt"
-msgid "Routed IPv6 prefix for downstream interfaces"
-msgstr ""
-
msgid "Router Advertisement-Service"
msgstr ""
msgid "SHA256"
msgstr "SHA256"
-msgid ""
-"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) "
-"use 6in4 instead"
-msgstr ""
-
-msgid "SIXXS-handle[/Tunnel-ID]"
-msgstr ""
-
msgid "SNR"
msgstr "SNR"
msgid "Server Settings"
msgstr "Inställningar för server"
-msgid "Server password"
-msgstr "Lösenordet för servern"
-
-msgid ""
-"Server password, enter the specific password of the tunnel when the username "
-"contains the tunnel ID"
-msgstr ""
-
-msgid "Server username"
-msgstr "Användarnamnet för servern"
-
msgid "Service Name"
msgstr "Namn på tjänst"
msgid "Source"
msgstr "Källa"
-msgid "Source routing"
-msgstr ""
-
msgid "Specifies the directory the device is attached to"
msgstr ""
"settings."
msgstr ""
-msgid ""
-"The tunnel end-point is behind NAT, defaults to disabled and only applies to "
-"AYIYA"
-msgstr ""
-
msgid ""
"The uploaded image file does not contain a supported format. Make sure that "
"you choose the generic image format for your platform."
msgid "Tunnel Link"
msgstr "Tunnel-länk"
-msgid "Tunnel broker protocol"
-msgstr ""
-
-msgid "Tunnel setup server"
-msgstr ""
-
-msgid "Tunnel type"
-msgstr "Tunnel-typ"
-
msgid "Tx-Power"
msgstr ""
msgid "Vendor Class to send when requesting DHCP"
msgstr ""
-msgid "Verbose"
-msgstr "Utförlig"
-
-msgid "Verbose logging by aiccu daemon"
-msgstr ""
-
msgid "Verify"
msgstr "Verkställ"
"and ad-hoc mode) to be installed."
msgstr ""
-msgid ""
-"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)"
-msgstr ""
-
msgid "Waiting for changes to be applied..."
msgstr "Väntar på att ändringarna ska tillämpas..."
"communications"
msgstr ""
-msgid "Whether to create an IPv6 default route over the tunnel"
-msgstr ""
-
-msgid "Whether to route only packets from delegated prefixes"
-msgstr ""
-
msgid "Width"
msgstr "Bredd"
msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
msgstr "lokal <abbr title=\"Domain Name System\">DNS</abbr>-fil"
-msgid "minimum 1280, maximum 1480"
-msgstr ""
-
msgid "minutes"
msgstr "minuter"
msgid "« Back"
msgstr "« Bakåt"
-#~ msgid "Apply"
-#~ msgstr "Verkställ"
-
-#~ msgid "Applying changes"
-#~ msgstr "Verkställer ändringar"
-
-#~ msgid "Configuration applied."
-#~ msgstr "Konfigurationen tillämpades"
-
-#~ msgid "Save & Apply"
-#~ msgstr "Spara & Verkställ"
-
-#~ msgid "The following changes have been committed"
-#~ msgstr "Följande ändringar har skickats in"
-
-#~ msgid "There are no pending changes to apply!"
-#~ msgstr "Det finns inga pendlande ändringar att verkställa!"
-
-#~ msgid "Action"
-#~ msgstr "Åtgärd"
-
-#~ msgid "Buttons"
-#~ msgstr "Knappar"
msgid "ADSL"
msgstr ""
-msgid "AICCU (SIXXS)"
-msgstr ""
-
msgid "ANSI T1.413"
msgstr ""
msgid "ATU-C System Vendor ID"
msgstr ""
-msgid "AYIYA"
-msgstr ""
-
msgid "Access Concentrator"
msgstr ""
msgid "Allowed IPs"
msgstr ""
-msgid ""
-"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
-"\">Tunneling Comparison</a> on SIXXS"
-msgstr ""
-
msgid "Always announce default router"
msgstr ""
msgid "Band"
msgstr ""
-msgid "Behind NAT"
-msgstr ""
-
msgid ""
"Below is the determined list of files to backup. It consists of changed "
"configuration files marked by opkg, essential base files and the user "
msgid "Connection Limit"
msgstr ""
-msgid "Connection to server fails when TLS cannot be used"
-msgstr ""
-
msgid "Connections"
msgstr ""
msgid "Default is stateless + stateful"
msgstr ""
-msgid "Default route"
-msgstr ""
-
msgid "Default state"
msgstr ""
msgid "Header Error Code Errors (HEC)"
msgstr ""
-msgid "Heartbeat"
-msgstr ""
-
msgid ""
"Here you can configure the basic aspects of your device like its hostname or "
"the timezone."
msgid "IPv6 address"
msgstr ""
-msgid "IPv6 address delegated to the local tunnel endpoint (optional)"
-msgstr ""
-
msgid "IPv6 assignment hint"
msgstr ""
msgid "NTP server candidates"
msgstr ""
-msgid "NTP sync time-out"
-msgstr ""
-
msgid "Name"
msgstr ""
msgid "Optional"
msgstr ""
-msgid "Optional, specify to override default server (tic.sixxs.net)"
-msgstr ""
-
-msgid "Optional, use when the SIXXS account has more than one tunnel"
-msgstr ""
-
msgid ""
"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
"starting with <code>0x</code>."
msgid "Request IPv6-prefix of length"
msgstr ""
-msgid "Require TLS"
-msgstr ""
-
msgid "Required"
msgstr ""
msgid "Route type"
msgstr ""
-msgid "Routed IPv6 prefix for downstream interfaces"
-msgstr ""
-
msgid "Router Advertisement-Service"
msgstr ""
msgid "SHA256"
msgstr ""
-msgid ""
-"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) "
-"use 6in4 instead"
-msgstr ""
-
-msgid "SIXXS-handle[/Tunnel-ID]"
-msgstr ""
-
msgid "SNR"
msgstr ""
msgid "Server Settings"
msgstr ""
-msgid "Server password"
-msgstr ""
-
-msgid ""
-"Server password, enter the specific password of the tunnel when the username "
-"contains the tunnel ID"
-msgstr ""
-
-msgid "Server username"
-msgstr ""
-
msgid "Service Name"
msgstr ""
msgid "Source"
msgstr ""
-msgid "Source routing"
-msgstr ""
-
msgid "Specifies the directory the device is attached to"
msgstr ""
"settings."
msgstr ""
-msgid ""
-"The tunnel end-point is behind NAT, defaults to disabled and only applies to "
-"AYIYA"
-msgstr ""
-
msgid ""
"The uploaded image file does not contain a supported format. Make sure that "
"you choose the generic image format for your platform."
msgid "Tunnel Link"
msgstr ""
-msgid "Tunnel broker protocol"
-msgstr ""
-
-msgid "Tunnel setup server"
-msgstr ""
-
-msgid "Tunnel type"
-msgstr ""
-
msgid "Tx-Power"
msgstr ""
msgid "Vendor Class to send when requesting DHCP"
msgstr ""
-msgid "Verbose"
-msgstr ""
-
-msgid "Verbose logging by aiccu daemon"
-msgstr ""
-
msgid "Verify"
msgstr ""
"and ad-hoc mode) to be installed."
msgstr ""
-msgid ""
-"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)"
-msgstr ""
-
msgid "Waiting for changes to be applied..."
msgstr ""
"communications"
msgstr ""
-msgid "Whether to create an IPv6 default route over the tunnel"
-msgstr ""
-
-msgid "Whether to route only packets from delegated prefixes"
-msgstr ""
-
msgid "Width"
msgstr ""
msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
msgstr ""
-msgid "minimum 1280, maximum 1480"
-msgstr ""
-
msgid "minutes"
msgstr ""
msgid "ADSL"
msgstr ""
-msgid "AICCU (SIXXS)"
-msgstr ""
-
msgid "ANSI T1.413"
msgstr ""
msgid "ATU-C System Vendor ID"
msgstr ""
-msgid "AYIYA"
-msgstr ""
-
msgid "Access Concentrator"
msgstr ""
msgid "Allowed IPs"
msgstr ""
-msgid ""
-"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
-"\">Tunneling Comparison</a> on SIXXS"
-msgstr ""
-
msgid "Always announce default router"
msgstr ""
msgid "Band"
msgstr ""
-msgid "Behind NAT"
-msgstr ""
-
msgid ""
"Below is the determined list of files to backup. It consists of changed "
"configuration files marked by opkg, essential base files and the user "
msgid "Connection Limit"
msgstr ""
-msgid "Connection to server fails when TLS cannot be used"
-msgstr ""
-
msgid "Connections"
msgstr ""
msgid "Default is stateless + stateful"
msgstr ""
-msgid "Default route"
-msgstr ""
-
msgid "Default state"
msgstr ""
msgid "Header Error Code Errors (HEC)"
msgstr ""
-msgid "Heartbeat"
-msgstr ""
-
msgid ""
"Here you can configure the basic aspects of your device like its hostname or "
"the timezone."
msgid "IPv6 address"
msgstr ""
-msgid "IPv6 address delegated to the local tunnel endpoint (optional)"
-msgstr ""
-
msgid "IPv6 assignment hint"
msgstr ""
msgid "NTP server candidates"
msgstr ""
-msgid "NTP sync time-out"
-msgstr ""
-
msgid "Name"
msgstr ""
msgid "Optional"
msgstr ""
-msgid "Optional, specify to override default server (tic.sixxs.net)"
-msgstr ""
-
-msgid "Optional, use when the SIXXS account has more than one tunnel"
-msgstr ""
-
msgid ""
"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
"starting with <code>0x</code>."
msgid "Request IPv6-prefix of length"
msgstr ""
-msgid "Require TLS"
-msgstr ""
-
msgid "Required"
msgstr ""
msgid "Route type"
msgstr ""
-msgid "Routed IPv6 prefix for downstream interfaces"
-msgstr ""
-
msgid "Router Advertisement-Service"
msgstr ""
msgid "SHA256"
msgstr ""
-msgid ""
-"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) "
-"use 6in4 instead"
-msgstr ""
-
-msgid "SIXXS-handle[/Tunnel-ID]"
-msgstr ""
-
msgid "SNR"
msgstr ""
msgid "Server Settings"
msgstr ""
-msgid "Server password"
-msgstr ""
-
-msgid ""
-"Server password, enter the specific password of the tunnel when the username "
-"contains the tunnel ID"
-msgstr ""
-
-msgid "Server username"
-msgstr ""
-
msgid "Service Name"
msgstr ""
msgid "Source"
msgstr ""
-msgid "Source routing"
-msgstr ""
-
msgid "Specifies the directory the device is attached to"
msgstr ""
"settings."
msgstr ""
-msgid ""
-"The tunnel end-point is behind NAT, defaults to disabled and only applies to "
-"AYIYA"
-msgstr ""
-
msgid ""
"The uploaded image file does not contain a supported format. Make sure that "
"you choose the generic image format for your platform."
msgid "Tunnel Link"
msgstr ""
-msgid "Tunnel broker protocol"
-msgstr ""
-
-msgid "Tunnel setup server"
-msgstr ""
-
-msgid "Tunnel type"
-msgstr ""
-
msgid "Tx-Power"
msgstr ""
msgid "Vendor Class to send when requesting DHCP"
msgstr ""
-msgid "Verbose"
-msgstr ""
-
-msgid "Verbose logging by aiccu daemon"
-msgstr ""
-
msgid "Verify"
msgstr ""
"and ad-hoc mode) to be installed."
msgstr ""
-msgid ""
-"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)"
-msgstr ""
-
msgid "Waiting for changes to be applied..."
msgstr ""
"communications"
msgstr ""
-msgid "Whether to create an IPv6 default route over the tunnel"
-msgstr ""
-
-msgid "Whether to route only packets from delegated prefixes"
-msgstr ""
-
msgid "Width"
msgstr ""
msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
msgstr "yerel <abbr title=\"Domain Name System\">DNS</abbr> dosyası"
-msgid "minimum 1280, maximum 1480"
-msgstr ""
-
msgid "minutes"
msgstr ""
msgid "ADSL"
msgstr ""
-msgid "AICCU (SIXXS)"
-msgstr ""
-
msgid "ANSI T1.413"
msgstr ""
msgid "ATU-C System Vendor ID"
msgstr ""
-msgid "AYIYA"
-msgstr ""
-
msgid "Access Concentrator"
msgstr "Концентратор доступу"
msgid "Allowed IPs"
msgstr ""
-msgid ""
-"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
-"\">Tunneling Comparison</a> on SIXXS"
-msgstr ""
-
msgid "Always announce default router"
msgstr ""
msgid "Band"
msgstr ""
-msgid "Behind NAT"
-msgstr ""
-
msgid ""
"Below is the determined list of files to backup. It consists of changed "
"configuration files marked by opkg, essential base files and the user "
msgid "Connection Limit"
msgstr "Гранична кількість підключень"
-msgid "Connection to server fails when TLS cannot be used"
-msgstr ""
-
msgid "Connections"
msgstr "Підключення"
msgid "Default is stateless + stateful"
msgstr ""
-msgid "Default route"
-msgstr ""
-
msgid "Default state"
msgstr "Типовий стан"
msgid "Header Error Code Errors (HEC)"
msgstr ""
-msgid "Heartbeat"
-msgstr ""
-
msgid ""
"Here you can configure the basic aspects of your device like its hostname or "
"the timezone."
msgid "IPv6 address"
msgstr "Адреса IPv6"
-msgid "IPv6 address delegated to the local tunnel endpoint (optional)"
-msgstr ""
-
msgid "IPv6 assignment hint"
msgstr ""
msgid "NTP server candidates"
msgstr "Кандидати для синхронізації NTP-сервера"
-msgid "NTP sync time-out"
-msgstr ""
-
msgid "Name"
msgstr "Ім'я"
msgid "Optional"
msgstr ""
-msgid "Optional, specify to override default server (tic.sixxs.net)"
-msgstr ""
-
-msgid "Optional, use when the SIXXS account has more than one tunnel"
-msgstr ""
-
msgid ""
"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
"starting with <code>0x</code>."
msgid "Request IPv6-prefix of length"
msgstr ""
-msgid "Require TLS"
-msgstr ""
-
msgid "Required"
msgstr ""
msgid "Route type"
msgstr ""
-msgid "Routed IPv6 prefix for downstream interfaces"
-msgstr ""
-
msgid "Router Advertisement-Service"
msgstr ""
msgid "SHA256"
msgstr ""
-msgid ""
-"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) "
-"use 6in4 instead"
-msgstr ""
-
-msgid "SIXXS-handle[/Tunnel-ID]"
-msgstr ""
-
msgid "SNR"
msgstr ""
msgid "Server Settings"
msgstr "Настройки сервера"
-msgid "Server password"
-msgstr ""
-
-msgid ""
-"Server password, enter the specific password of the tunnel when the username "
-"contains the tunnel ID"
-msgstr ""
-
-msgid "Server username"
-msgstr ""
-
msgid "Service Name"
msgstr "Назва (ім'я) сервісу"
msgid "Source"
msgstr "Джерело"
-msgid "Source routing"
-msgstr ""
-
msgid "Specifies the directory the device is attached to"
msgstr "Визначає каталог, до якого приєднаний пристрій"
"з'єднатися. Залежно від ваших настройок, можливо, вам треба буде оновити "
"адресу вашого комп'ютера, щоб знову отримати доступ до пристрою."
-msgid ""
-"The tunnel end-point is behind NAT, defaults to disabled and only applies to "
-"AYIYA"
-msgstr ""
-
msgid ""
"The uploaded image file does not contain a supported format. Make sure that "
"you choose the generic image format for your platform."
msgid "Tunnel Link"
msgstr ""
-msgid "Tunnel broker protocol"
-msgstr ""
-
-msgid "Tunnel setup server"
-msgstr ""
-
-msgid "Tunnel type"
-msgstr ""
-
msgid "Tx-Power"
msgstr "Потужність передавача"
msgid "Vendor Class to send when requesting DHCP"
msgstr "Клас постачальника для відправки при запиті DHCP"
-msgid "Verbose"
-msgstr ""
-
-msgid "Verbose logging by aiccu daemon"
-msgstr ""
-
msgid "Verify"
msgstr "Перевірте"
"WPA-шифрування потребує інсталяції <em>wpa_supplicant</em> (для режиму "
"клієнта) або <em>hostapd</em> (для Точки доступу та режиму ad-hoc)."
-msgid ""
-"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)"
-msgstr ""
-
msgid "Waiting for changes to be applied..."
msgstr "Очікуємо, доки зміни наберуть чинності..."
"communications"
msgstr ""
-msgid "Whether to create an IPv6 default route over the tunnel"
-msgstr ""
-
-msgid "Whether to route only packets from delegated prefixes"
-msgstr ""
-
msgid "Width"
msgstr ""
"Локальний <abbr title=\"Domain Name System — система доменних імен\">DNS</"
"abbr>-файл"
-msgid "minimum 1280, maximum 1480"
-msgstr ""
-
msgid "minutes"
msgstr ""
msgid "ADSL"
msgstr ""
-msgid "AICCU (SIXXS)"
-msgstr ""
-
msgid "ANSI T1.413"
msgstr ""
msgid "ATU-C System Vendor ID"
msgstr ""
-msgid "AYIYA"
-msgstr ""
-
msgid "Access Concentrator"
msgstr ""
msgid "Allowed IPs"
msgstr ""
-msgid ""
-"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
-"\">Tunneling Comparison</a> on SIXXS"
-msgstr ""
-
msgid "Always announce default router"
msgstr ""
msgid "Band"
msgstr ""
-msgid "Behind NAT"
-msgstr ""
-
msgid ""
"Below is the determined list of files to backup. It consists of changed "
"configuration files marked by opkg, essential base files and the user "
msgid "Connection Limit"
msgstr "Giới hạn kết nối"
-msgid "Connection to server fails when TLS cannot be used"
-msgstr ""
-
msgid "Connections"
msgstr ""
msgid "Default is stateless + stateful"
msgstr ""
-msgid "Default route"
-msgstr ""
-
msgid "Default state"
msgstr ""
msgid "Header Error Code Errors (HEC)"
msgstr ""
-msgid "Heartbeat"
-msgstr ""
-
msgid ""
"Here you can configure the basic aspects of your device like its hostname or "
"the timezone."
msgid "IPv6 address"
msgstr ""
-msgid "IPv6 address delegated to the local tunnel endpoint (optional)"
-msgstr ""
-
msgid "IPv6 assignment hint"
msgstr ""
msgid "NTP server candidates"
msgstr ""
-msgid "NTP sync time-out"
-msgstr ""
-
msgid "Name"
msgstr "Tên"
msgid "Optional"
msgstr ""
-msgid "Optional, specify to override default server (tic.sixxs.net)"
-msgstr ""
-
-msgid "Optional, use when the SIXXS account has more than one tunnel"
-msgstr ""
-
msgid ""
"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
"starting with <code>0x</code>."
msgid "Request IPv6-prefix of length"
msgstr ""
-msgid "Require TLS"
-msgstr ""
-
msgid "Required"
msgstr ""
msgid "Route type"
msgstr ""
-msgid "Routed IPv6 prefix for downstream interfaces"
-msgstr ""
-
msgid "Router Advertisement-Service"
msgstr ""
msgid "SHA256"
msgstr ""
-msgid ""
-"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) "
-"use 6in4 instead"
-msgstr ""
-
-msgid "SIXXS-handle[/Tunnel-ID]"
-msgstr ""
-
msgid "SNR"
msgstr ""
msgid "Server Settings"
msgstr ""
-msgid "Server password"
-msgstr ""
-
-msgid ""
-"Server password, enter the specific password of the tunnel when the username "
-"contains the tunnel ID"
-msgstr ""
-
-msgid "Server username"
-msgstr ""
-
msgid "Service Name"
msgstr ""
msgid "Source"
msgstr "Nguồn"
-msgid "Source routing"
-msgstr ""
-
msgid "Specifies the directory the device is attached to"
msgstr ""
"một vài phút cho tới khi kết nối lại. Có thể cần phải làm mới địa chỉ của "
"máy tính để tiếp cận thiết bị một lần nữa, phụ thuộc vào cài đặt của bạn. "
-msgid ""
-"The tunnel end-point is behind NAT, defaults to disabled and only applies to "
-"AYIYA"
-msgstr ""
-
msgid ""
"The uploaded image file does not contain a supported format. Make sure that "
"you choose the generic image format for your platform."
msgid "Tunnel Link"
msgstr ""
-msgid "Tunnel broker protocol"
-msgstr ""
-
-msgid "Tunnel setup server"
-msgstr ""
-
-msgid "Tunnel type"
-msgstr ""
-
msgid "Tx-Power"
msgstr ""
msgid "Vendor Class to send when requesting DHCP"
msgstr ""
-msgid "Verbose"
-msgstr ""
-
-msgid "Verbose logging by aiccu daemon"
-msgstr ""
-
msgid "Verify"
msgstr ""
"and ad-hoc mode) to be installed."
msgstr ""
-msgid ""
-"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)"
-msgstr ""
-
msgid "Waiting for changes to be applied..."
msgstr ""
"communications"
msgstr ""
-msgid "Whether to create an IPv6 default route over the tunnel"
-msgstr ""
-
-msgid "Whether to route only packets from delegated prefixes"
-msgstr ""
-
msgid "Width"
msgstr ""
msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
msgstr "Tập tin <abbr title=\"Domain Name System\">DNS</abbr> địa phương"
-msgid "minimum 1280, maximum 1480"
-msgstr ""
-
msgid "minutes"
msgstr ""
msgid "ADSL"
msgstr "ADSL"
-msgid "AICCU (SIXXS)"
-msgstr "AICCU (SIXXS)"
-
msgid "ANSI T1.413"
msgstr "ANSI T1.413"
msgid "ATU-C System Vendor ID"
msgstr "ATU-C 系统供应商 ID"
-msgid "AYIYA"
-msgstr "AYIYA"
-
msgid "Access Concentrator"
msgstr "接入集中器"
msgid "Allowed IPs"
msgstr "允许的 IP"
-msgid ""
-"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
-"\">Tunneling Comparison</a> on SIXXS"
-msgstr ""
-"也请查看 SIXXS 上的<a href=\"https://www.sixxs.net/faq/connectivity/?"
-"faq=comparison\">隧道对比</a>"
-
msgid "Always announce default router"
msgstr "总是通告默认路由"
msgid "Band"
msgstr "频宽"
-msgid "Behind NAT"
-msgstr "在 NAT 网络内"
-
msgid ""
"Below is the determined list of files to backup. It consists of changed "
"configuration files marked by opkg, essential base files and the user "
msgid "Connection Limit"
msgstr "连接数限制"
-msgid "Connection to server fails when TLS cannot be used"
-msgstr "当 TLS 不可用时，与服务器连接失败"
-
msgid "Connections"
msgstr "连接"
msgid "Default is stateless + stateful"
msgstr "默认是无状态的 + 有状态的"
-msgid "Default route"
-msgstr "默认路由"
-
msgid "Default state"
msgstr "默认状态"
msgid "Header Error Code Errors (HEC)"
msgstr "请求头错误代码错误（HEC）"
-msgid "Heartbeat"
-msgstr "心跳"
-
msgid ""
"Here you can configure the basic aspects of your device like its hostname or "
"the timezone."
msgid "IPv6 address"
msgstr "IPv6 地址"
-msgid "IPv6 address delegated to the local tunnel endpoint (optional)"
-msgstr "绑定到隧道本端的 IPv6 地址（可选）"
-
msgid "IPv6 assignment hint"
msgstr "IPv6 分配提示"
msgid "NTP server candidates"
msgstr "候选 NTP 服务器"
-msgid "NTP sync time-out"
-msgstr "NTP 同步超时"
-
msgid "Name"
msgstr "名称"
msgid "Optional"
msgstr "可选"
-msgid "Optional, specify to override default server (tic.sixxs.net)"
-msgstr "可选，设置这个选项会覆盖默认服务器（tic.sixxs.net）"
-
-msgid "Optional, use when the SIXXS account has more than one tunnel"
-msgstr "可选，如果您的 SIXXS 账号拥有一个以上的隧道请设置此项"
-
msgid ""
"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
"starting with <code>0x</code>."
msgid "Request IPv6-prefix of length"
msgstr "请求指定长度的 IPv6 前缀"
-msgid "Require TLS"
-msgstr "必须使用 TLS"
-
msgid "Required"
msgstr "必须"
msgid "Route type"
msgstr "路由类型"
-msgid "Routed IPv6 prefix for downstream interfaces"
-msgstr "下行接口的路由 IPv6 前缀"
-
msgid "Router Advertisement-Service"
msgstr "路由通告服务"
msgid "SHA256"
msgstr "SHA256"
-msgid ""
-"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) "
-"use 6in4 instead"
-msgstr "SIXXS 仅支持 TIC，对于使用 IP 协议 41（RFC4213）的静态隧道，使用 6in4"
-
-msgid "SIXXS-handle[/Tunnel-ID]"
-msgstr "SIXXS-handle[/Tunnel-ID]"
-
msgid "SNR"
msgstr "SNR"
msgid "Server Settings"
msgstr "服务器设置"
-msgid "Server password"
-msgstr "服务器密码"
-
-msgid ""
-"Server password, enter the specific password of the tunnel when the username "
-"contains the tunnel ID"
-msgstr "服务器密码，如果用户名包含隧道 ID 则在此填写隧道自己的密码"
-
-msgid "Server username"
-msgstr "服务器用户名"
-
msgid "Service Name"
msgstr "服务名"
msgid "Source"
msgstr "源地址"
-msgid "Source routing"
-msgstr "源路由"
-
msgid "Specifies the directory the device is attached to"
msgstr "指定设备的挂载目录"
"正在刷新系统...<br />切勿关闭电源! DO NOT POWER OFF THE DEVICE!<br />等待数分"
"钟后即可尝试重新连接到路由。您可能需要更改计算机的 IP 地址以重新连接。"
-msgid ""
-"The tunnel end-point is behind NAT, defaults to disabled and only applies to "
-"AYIYA"
-msgstr "隧道端点在 NAT 之后，默认为禁用，仅适用于 AYIYA"
-
msgid ""
"The uploaded image file does not contain a supported format. Make sure that "
"you choose the generic image format for your platform."
msgid "Tunnel Link"
msgstr "隧道链接"
-msgid "Tunnel broker protocol"
-msgstr "隧道协议"
-
-msgid "Tunnel setup server"
-msgstr "隧道配置服务器"
-
-msgid "Tunnel type"
-msgstr "隧道类型"
-
msgid "Tx-Power"
msgstr "传输功率"
msgid "Vendor Class to send when requesting DHCP"
msgstr "请求 DHCP 时发送的 Vendor Class 选项"
-msgid "Verbose"
-msgstr "详细"
-
-msgid "Verbose logging by aiccu daemon"
-msgstr "Aiccu 守护程序详细日志"
-
msgid "Verify"
msgstr "验证"
"WPA 加密需要安装 wpa_supplicant（客户端模式）或安装 hostapd（接入点 AP、点对"
"点 Ad-Hoc 模式）。"
-msgid ""
-"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)"
-msgstr "NTP 同步前的等待时间，设置为 0 表示不等待（可选）"
-
msgid "Waiting for changes to be applied..."
msgstr "正在应用更改..."
"communications"
msgstr "当使用 PSK 时，PMK 可以在没有 AP 间通信的情况下在本地生成"
-msgid "Whether to create an IPv6 default route over the tunnel"
-msgstr "是否添加一条通向隧道的 IPv6 默认路由"
-
-msgid "Whether to route only packets from delegated prefixes"
-msgstr "是否仅路由来自分发前缀的数据包"
-
msgid "Width"
msgstr "频宽"
msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
msgstr "本地 <abbr title=\"Domain Name Syste\">DNS</abbr> 解析文件"
-msgid "minimum 1280, maximum 1480"
-msgstr "最小值 1280，最大值 1480"
-
msgid "minutes"
msgstr "分钟"
msgid "« Back"
msgstr "« 后退"
-
-#~ msgid "Apply"
-#~ msgstr "应用"
-
-#~ msgid "Applying changes"
-#~ msgstr "正在应用更改"
-
-#~ msgid "Configuration applied."
-#~ msgstr "配置已应用。"
-
-#~ msgid "Save & Apply"
-#~ msgstr "保存&应用"
-
-#~ msgid "The following changes have been committed"
-#~ msgstr "以下更改已提交"
-
-#~ msgid "There are no pending changes to apply!"
-#~ msgstr "没有待生效的更改！"
-
-#~ msgid "Action"
-#~ msgstr "动作"
-
-#~ msgid "Buttons"
-#~ msgstr "按键"
-
-#~ msgid "Handler"
-#~ msgstr "处理程序"
-
-#~ msgid "Maximum hold time"
-#~ msgstr "最大持续时间"
-
-#~ msgid "Minimum hold time"
-#~ msgstr "最低持续时间"
-
-#~ msgid "Path to executable which handles the button event"
-#~ msgstr "处理按键动作的可执行文件路径"
-
-#~ msgid "Specifies the button state to handle"
-#~ msgstr "指定要处理的按键状态"
-
-#~ msgid "This page allows the configuration of custom button actions"
-#~ msgstr "自定义按键动作。"
-
-#~ msgid "Leasetime"
-#~ msgstr "租用时间"
-
-#~ msgid "Optional."
-#~ msgstr "可选。"
-
-#~ msgid "navigation Navigation"
-#~ msgstr "导航"
-
-#~ msgid "skiplink1 Skip to navigation"
-#~ msgstr "skiplink1 跳转到导航"
-
-#~ msgid "skiplink2 Skip to content"
-#~ msgstr "skiplink2 跳到内容"
-
-#~ msgid "AuthGroup"
-#~ msgstr "认证组"
-
-#~ msgid "automatic"
-#~ msgstr "自动"
-
-#~ msgid "AR Support"
-#~ msgstr "AR 支持"
-
-#~ msgid "Atheros 802.11%s Wireless Controller"
-#~ msgstr "Qualcomm/Atheros 802.11%s 无线控制器"
-
-#~ msgid "Background Scan"
-#~ msgstr "后台搜索"
-
-#~ msgid "Compression"
-#~ msgstr "压缩"
-
-#~ msgid "Disable HW-Beacon timer"
-#~ msgstr "停用 HW-Beacon 计时器"
-
-#~ msgid "Do not send probe responses"
-#~ msgstr "不回送探测响应"
-
-#~ msgid "Fast Frames"
-#~ msgstr "快速帧"
-
-#~ msgid "Maximum Rate"
-#~ msgstr "最高速率"
-
-#~ msgid "Minimum Rate"
-#~ msgstr "最低速率"
-
-#~ msgid "Multicast Rate"
-#~ msgstr "多播速率"
-
-#~ msgid "Outdoor Channels"
-#~ msgstr "户外频道"
-
-#~ msgid "Regulatory Domain"
-#~ msgstr "无线网络国家区域"
-
-#~ msgid "Separate WDS"
-#~ msgstr "隔离 WDS"
-
-#~ msgid "Static WDS"
-#~ msgstr "静态 WDS"
-
-#~ msgid "Turbo Mode"
-#~ msgstr "Turbo 模式"
-
-#~ msgid "XR Support"
-#~ msgstr "XR 支持"
-
-#~ msgid "Required. Public key of peer."
-#~ msgstr "必须，Peer 的公钥。"
-
-#~ msgid "An additional network will be created if you leave this checked."
-#~ msgstr "如果选中此复选框，则会创建一个附加网络。"
-
-#~ msgid "An additional network will be created if you leave this unchecked."
-#~ msgstr "取消选中将会另外创建一个新网络，而不会覆盖当前网络设置"
-
-#~ msgid "Join Network: Settings"
-#~ msgstr "加入网络：设置"
-
-#~ msgid "CPU"
-#~ msgstr "CPU"
-
-#~ msgid "Port %d"
-#~ msgstr "端口 %d"
-
-#~ msgid "Port %d is untagged in multiple VLANs!"
-#~ msgstr "端口 %d 在多个 VLAN 中均未标记！"
-
-#~ msgid "VLAN Interface"
-#~ msgstr "VLAN 接口"
msgid "ADSL"
msgstr ""
-msgid "AICCU (SIXXS)"
-msgstr ""
-
msgid "ANSI T1.413"
msgstr ""
msgid "ATU-C System Vendor ID"
msgstr ""
-msgid "AYIYA"
-msgstr ""
-
msgid "Access Concentrator"
msgstr "接入集線器"
msgid "Allowed IPs"
msgstr ""
-msgid ""
-"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
-"\">Tunneling Comparison</a> on SIXXS"
-msgstr ""
-
msgid "Always announce default router"
msgstr ""
msgid "Band"
msgstr ""
-msgid "Behind NAT"
-msgstr ""
-
msgid ""
"Below is the determined list of files to backup. It consists of changed "
"configuration files marked by opkg, essential base files and the user "
msgid "Connection Limit"
msgstr "連線限制"
-msgid "Connection to server fails when TLS cannot be used"
-msgstr ""
-
msgid "Connections"
msgstr "連線數"
msgid "Default is stateless + stateful"
msgstr ""
-msgid "Default route"
-msgstr ""
-
msgid "Default state"
msgstr "預設狀態"
msgid "Header Error Code Errors (HEC)"
msgstr ""
-msgid "Heartbeat"
-msgstr ""
-
msgid ""
"Here you can configure the basic aspects of your device like its hostname or "
"the timezone."
msgid "IPv6 address"
msgstr "IPv6位址"
-msgid "IPv6 address delegated to the local tunnel endpoint (optional)"
-msgstr ""
-
msgid "IPv6 assignment hint"
msgstr ""
msgid "NTP server candidates"
msgstr "NTP伺服器備選"
-msgid "NTP sync time-out"
-msgstr ""
-
msgid "Name"
msgstr "名稱"
msgid "Optional"
msgstr ""
-msgid "Optional, specify to override default server (tic.sixxs.net)"
-msgstr ""
-
-msgid "Optional, use when the SIXXS account has more than one tunnel"
-msgstr ""
-
msgid ""
"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
"starting with <code>0x</code>."
msgid "Request IPv6-prefix of length"
msgstr ""
-msgid "Require TLS"
-msgstr ""
-
msgid "Required"
msgstr ""
msgid "Route type"
msgstr ""
-msgid "Routed IPv6 prefix for downstream interfaces"
-msgstr ""
-
msgid "Router Advertisement-Service"
msgstr ""
msgid "SHA256"
msgstr ""
-msgid ""
-"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) "
-"use 6in4 instead"
-msgstr ""
-
-msgid "SIXXS-handle[/Tunnel-ID]"
-msgstr ""
-
msgid "SNR"
msgstr ""
msgid "Server Settings"
msgstr "伺服器設定值"
-msgid "Server password"
-msgstr ""
-
-msgid ""
-"Server password, enter the specific password of the tunnel when the username "
-"contains the tunnel ID"
-msgstr ""
-
-msgid "Server username"
-msgstr ""
-
msgid "Service Name"
msgstr "服務名稱"
msgid "Source"
msgstr "來源"
-msgid "Source routing"
-msgstr ""
-
msgid "Specifies the directory the device is attached to"
msgstr "指定這個設備被附掛到那個目錄"
"系統現正刷機中.<br /> 請勿關閉設備!<br /> 等待數分鐘直到您重新在連線. 可能需"
"要更新您電腦的位址以便再連設備, 端看您的設定. "
-msgid ""
-"The tunnel end-point is behind NAT, defaults to disabled and only applies to "
-"AYIYA"
-msgstr ""
-
msgid ""
"The uploaded image file does not contain a supported format. Make sure that "
"you choose the generic image format for your platform."
msgid "Tunnel Link"
msgstr ""
-msgid "Tunnel broker protocol"
-msgstr ""
-
-msgid "Tunnel setup server"
-msgstr ""
-
-msgid "Tunnel type"
-msgstr ""
-
msgid "Tx-Power"
msgstr "傳送-功率"
msgid "Vendor Class to send when requesting DHCP"
msgstr "當請求DHCP封包時要傳送的製造商類別碼"
-msgid "Verbose"
-msgstr ""
-
-msgid "Verbose logging by aiccu daemon"
-msgstr ""
-
msgid "Verify"
msgstr "確認"
"WPA-加密需要 wpa_supplican(終端模式)或者hostapd熱點(對AP或者是 ad-hoc模式)已"
"被安裝."
-msgid ""
-"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)"
-msgstr ""
-
msgid "Waiting for changes to be applied..."
msgstr "等待修改被啟用..."
"communications"
msgstr ""
-msgid "Whether to create an IPv6 default route over the tunnel"
-msgstr ""
-
-msgid "Whether to route only packets from delegated prefixes"
-msgstr ""
-
msgid "Width"
msgstr ""
msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
msgstr "本地<abbr title=\"Domain Name System\">DNS</abbr> 檔案"
-msgid "minimum 1280, maximum 1480"
-msgstr ""
-
msgid "minutes"
msgstr ""
projects / project / luci.git / commitdiff