commands-nas.h

   1 #define __uqmi_nas_commands \
   2         __uqmi_command(nas_do_set_system_selection, __set-system-selection, no, QMI_SERVICE_NAS), \
   3         __uqmi_command(nas_set_network_modes, set-network-modes, required, CMD_TYPE_OPTION), \
   4         __uqmi_command(nas_initiate_network_register, network-register, no, QMI_SERVICE_NAS), \
   5         __uqmi_command(nas_set_plmn, set-plmn, no, QMI_SERVICE_NAS), \
   6         __uqmi_command(nas_set_mcc, mcc, required, CMD_TYPE_OPTION), \
   7         __uqmi_command(nas_set_mnc, mnc, required, CMD_TYPE_OPTION), \
   8         __uqmi_command(nas_network_scan, network-scan, no, QMI_SERVICE_NAS), \
   9         __uqmi_command(nas_get_signal_info, get-signal-info, no, QMI_SERVICE_NAS), \
  10         __uqmi_command(nas_get_serving_system, get-serving-system, no, QMI_SERVICE_NAS), \
  11         __uqmi_command(nas_set_network_preference, set-network-preference, required, CMD_TYPE_OPTION), \
  12         __uqmi_command(nas_set_roaming, set-network-roaming, required, CMD_TYPE_OPTION) \
  13
  14 #define nas_helptext \
  15                 "  --set-network-modes <modes>:      Set usable network modes (Syntax: <mode1>[,<mode2>,...])\n" \
  16                 "                                    Available modes: all, lte, umts, gsm, cdma, td-scdma\n" \
  17                 "  --set-network-preference <mode>:  Set preferred network mode to <mode>\n" \
  18                 "                                    Available modes: auto, gsm, wcdma\n" \
  19                 "  --set-network-roaming <mode>:     Set roaming preference:\n" \
  20                 "                                    Available modes: any, off, only\n" \
  21                 "  --network-scan:                   Initiate network scan\n" \
  22                 "  --network-register:               Initiate network register\n" \
  23                 "  --set-plmn:                       Register at specified network\n" \
  24                 "    --mcc <mcc>:                    Mobile Country Code (0 - auto)\n" \
  25                 "    --mnc <mnc>:                    Mobile Network Code\n" \
  26                 "  --get-signal-info:                Get signal strength info\n" \
  27                 "  --get-serving-system:             Get serving system info\n" \
  28