+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "ar7241_ubnt-xm.dtsi"
-
-/ {
- compatible = "ubnt,xm", "qca,ar7241";
- model = "Ubiquiti Bullet M";
-};
-
-ð1 {
- compatible = "syscon";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "ar7241_ubnt-xm.dtsi"
-
-/ {
- compatible = "ubnt,nm", "qca,ar7241";
- model = "Ubiquiti Nanostation M";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "ar7241_ubnt-xm.dtsi"
-
-/ {
- compatible = "ubnt,rm", "qca,ar7241";
- model = "Ubiquiti Rocket M";
-};
-
-ð1 {
- compatible = "syscon";
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&usb {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar7241.dtsi"
-
-/ {
- compatible = "ubnt,unifi", "qca,ar7241";
- model = "Ubiquiti UniFi AP";
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- extosc: ref {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <40000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
-
- poll-interval = <20>;
- button@0 {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- led@0 {
- label = "ubnt:green:dome";
- gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
- };
-
- led@1 {
- label = "ubnt:orange:dome";
- gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&uart {
- status = "okay";
-};
-
-&pll {
- clocks = <&extosc>;
-};
-
-&spi {
- status = "okay";
- num-cs = <1>;
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "mx25l6405d";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x000000 0x040000>;
- read-only;
- };
-
- partition@1 {
- label = "u-boot-env";
- reg = <0x040000 0x010000>;
- };
-
- partition@2 {
- label = "firmware";
- reg = <0x050000 0x750000>;
- };
-
- partition@3 {
- label = "board_config";
- reg = <0x7a0000 0x010000>;
- read-only;
- };
-
- partition@4 {
- label = "cfg";
- reg = <0x7b0000 0x040000>;
- read-only;
- };
-
- art: partition@5 {
- label = "art";
- reg = <0x7f0000 0x010000>;
- read-only;
- };
- };
- };
-};
-
-&pcie {
- status = "okay";
-
- ath9k@0000 {
- reg = <0x0000 0 0 0 0>;
- qca,no-eeprom;
- };
-};
-
-&mdio0 {
- status = "okay";
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- phy-mode = "mii";
- };
-};
-
-ð0 {
- status = "okay";
-
- mtd-mac-address = <&art 0x0>;
- phy-handle = <&phy4>;
-};
-
-ð1 {
- status = "okay";
-
- compatible = "syscon";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "ar7241_ubnt-xm.dtsi"
-
-/ {
- compatible = "ubnt,xm", "qca,ar7241";
- model = "Ubiquiti Networks XM (rev 1.0) board";
-};
-
-ð1 {
- compatible = "syscon";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar7241.dtsi"
-
-/ {
- compatible = "ubnt,xm", "qca,ar7241";
- model = "Ubiquiti Networks XM (rev 1.0) board";
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x2000000>;
- };
-
-/* extosc: ref {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <40000000>;
- };
-*/
- keys {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
-
- poll-interval = <20>;
- button@0 {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- led@0 {
- label = "ubnt:red:link1";
- gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
- };
-
- led@1 {
- label = "ubnt:orange:link2";
- gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
- };
-
- led@2 {
- label = "ubnt:green:link3";
- gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
- };
-
- led@3 {
- label = "ubnt:green:link4";
- gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&uart {
- status = "okay";
-};
-
-/*&pll {
- clocks = <&extosc>;
-};*/
-
-&spi {
- status = "okay";
- num-cs = <1>;
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "mx25l6405d";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x000000 0x040000>;
- read-only;
- };
-
- partition@1 {
- label = "u-boot-env";
- reg = <0x040000 0x010000>;
- };
-
- partition@2 {
- label = "firmware";
- reg = <0x050000 0x750000>;
- };
-
- partition@3 {
- label = "board_config";
- reg = <0x7a0000 0x010000>;
- read-only;
- };
-
- partition@4 {
- label = "cfg";
- reg = <0x7b0000 0x040000>;
- read-only;
- };
-
- art: partition@5 {
- label = "art";
- reg = <0x7f0000 0x010000>;
- read-only;
- };
- };
- };
-};
-
-&pcie {
- status = "okay";
-
- ath9k@0000 {
- reg = <0x0000 0 0 0 0>;
- qca,no-eeprom;
- };
-};
-
-&mdio0 {
- status = "okay";
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- phy-mode = "mii";
- };
-};
-
-ð0 {
- status = "okay";
-
- mtd-mac-address = <&art 0x0>;
-
- phy-mode = "mii";
- phy-handle = <&phy4>;
-};
-
-ð1 {
- status = "okay";
-
- mtd-mac-address = <&art 0x6>;
-};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "ar7241_ubnt_xm.dtsi"
+
+/ {
+ compatible = "ubnt,bullet-m", "qca,ar7241";
+ model = "Ubiquiti Bullet M";
+};
+
+ð1 {
+ compatible = "syscon";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "ar7241_ubnt_xm.dtsi"
+
+/ {
+ compatible = "ubnt,nano-m", "qca,ar7241";
+ model = "Ubiquiti Nanostation M";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "ar7241_ubnt_xm.dtsi"
+
+/ {
+ compatible = "ubnt,rocket-m", "qca,ar7241";
+ model = "Ubiquiti Rocket M";
+};
+
+ð1 {
+ compatible = "syscon";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar7241.dtsi"
+
+/ {
+ compatible = "ubnt,unifi", "qca,ar7241";
+ model = "Ubiquiti UniFi AP";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ extosc: ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <40000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ poll-interval = <20>;
+ button@0 {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led@0 {
+ label = "ubnt:green:dome";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ led@1 {
+ label = "ubnt:orange:dome";
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&pll {
+ clocks = <&extosc>;
+};
+
+&spi {
+ status = "okay";
+ num-cs = <1>;
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mx25l6405d";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@1 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ partition@2 {
+ label = "firmware";
+ reg = <0x050000 0x750000>;
+ };
+
+ partition@3 {
+ label = "board_config";
+ reg = <0x7a0000 0x010000>;
+ read-only;
+ };
+
+ partition@4 {
+ label = "cfg";
+ reg = <0x7b0000 0x040000>;
+ read-only;
+ };
+
+ art: partition@5 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k@0000 {
+ reg = <0x0000 0 0 0 0>;
+ qca,no-eeprom;
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "mii";
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+ phy-handle = <&phy4>;
+};
+
+ð1 {
+ status = "okay";
+
+ compatible = "syscon";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar7241.dtsi"
+
+/ {
+ compatible = "ubnt,xm", "qca,ar7241";
+ model = "Ubiquiti Networks XM (rev 1.0) board";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x2000000>;
+ };
+
+/* extosc: ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <40000000>;
+ };
+*/
+ keys {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ poll-interval = <20>;
+ button@0 {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led@0 {
+ label = "ubnt:red:link1";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ led@1 {
+ label = "ubnt:orange:link2";
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ led@2 {
+ label = "ubnt:green:link3";
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ led@3 {
+ label = "ubnt:green:link4";
+ gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+/*&pll {
+ clocks = <&extosc>;
+};*/
+
+&spi {
+ status = "okay";
+ num-cs = <1>;
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mx25l6405d";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@1 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ partition@2 {
+ label = "firmware";
+ reg = <0x050000 0x750000>;
+ };
+
+ partition@3 {
+ label = "board_config";
+ reg = <0x7a0000 0x010000>;
+ read-only;
+ };
+
+ partition@4 {
+ label = "cfg";
+ reg = <0x7b0000 0x040000>;
+ read-only;
+ };
+
+ art: partition@5 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k@0000 {
+ reg = <0x0000 0 0 0 0>;
+ qca,no-eeprom;
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "mii";
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+
+ phy-mode = "mii";
+ phy-handle = <&phy4>;
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x6>;
+};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar9330.dtsi"
-
-/ {
- model = "GL.iNet GL-AR150";
- compatible = "glinet,ar150";
-
- aliases {
- serial0 = &uart;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- wlan {
- label = "gl-ar150:orange:wlan";
- gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
-
- lan {
- label = "gl-ar150:green:lan";
- gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
-
- wan {
- label = "gl-ar150:green:wan";
- gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <100>;
-
- manual {
- label = "manual";
- linux,code = <BTN_7>;
- gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
- };
-
- auto {
- label = "auto";
- linux,code = <BTN_8>;
- gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
- };
-
- reset {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&uart {
- status = "okay";
-};
-
-&gpio {
- status = "okay";
-};
-
-&usb {
- dr_mode = "host";
- status = "okay";
-};
-
-&usb_phy {
- status = "okay";
- gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
-};
-
-&spi {
- num-chipselects = <1>;
- status = "okay";
-
- spiflash {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <104000000>;
- reg = <0>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x000000 0x040000>;
- read-only;
- };
-
- partition@1 {
- label = "u-boot-env";
- reg = <0x040000 0x010000>;
- };
-
- partition@2 {
- label = "firmware";
- reg = <0x050000 0xfa0000>;
- };
-
- art: partition@3 {
- label = "ART";
- reg = <0xff0000 0x010000>;
- read-only;
- };
- };
- };
-};
-
-&mdio0 {
- status = "okay";
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- phy-mode = "mii";
- };
-};
-
-ð0 {
- status = "okay";
-
- mtd-mac-address = <&art 0x0>;
-
- phy-handle = <&phy4>;
-};
-
-ð1 {
- status = "okay";
-
- mtd-mac-address = <&art 0x0>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-
- gmac-config {
- device = <&gmac>;
-
- switch-phy-addr-swap = <0>;
- switch-phy-swap = <0>;
- };
-};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9330.dtsi"
+
+/ {
+ model = "GL.iNet GL-AR150";
+ compatible = "glinet,ar150", "qca,ar9330";
+
+ aliases {
+ serial0 = &uart;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "gl-ar150:orange:wlan";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ lan {
+ label = "gl-ar150:green:lan";
+ gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ wan {
+ label = "gl-ar150:green:wan";
+ gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <100>;
+
+ manual {
+ label = "manual";
+ linux,code = <BTN_7>;
+ gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ auto {
+ label = "auto";
+ linux,code = <BTN_8>;
+ gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&gpio {
+ status = "okay";
+};
+
+&usb {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+ gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
+};
+
+&spi {
+ num-chipselects = <1>;
+ status = "okay";
+
+ spiflash {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <104000000>;
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@1 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ partition@2 {
+ label = "firmware";
+ reg = <0x050000 0xfa0000>;
+ };
+
+ art: partition@3 {
+ label = "ART";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "mii";
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+
+ phy-handle = <&phy4>;
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+
+ gmac-config {
+ device = <&gmac>;
+
+ switch-phy-addr-swap = <0>;
+ switch-phy-swap = <0>;
+ };
+};
/ {
model = "DPTechnics DPT-Module";
- compatible = "dptechnics,dpt-module";
+ compatible = "dptechnics,dpt-module", "qca,ar9331";
aliases {
serial0 = &uart;
/ {
model = "Dragino MS14 (Dragino 2)";
- compatible = "dragino,ms14";
+ compatible = "dragino,ms14", "qca,ar9331";
aliases {
serial0 = &uart;
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9331.dtsi"
+
+/ {
+ model = "Embedded Wireless Dorin";
+ compatible = "embeddedwireless,dorin", "qca,ar9331";
+
+ aliases {
+ serial0 = &uart;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "dorin:green:status";
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <100>;
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&gpio {
+ status = "okay";
+};
+
+&usb {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&spi {
+ num-chipselects = <1>;
+ status = "okay";
+
+ spiflash {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <104000000>;
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@1 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ partition@2 {
+ label = "firmware";
+ reg = <0x050000 0xfa0000>;
+ };
+
+ art: partition@3 {
+ label = "ART";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x1002>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+
+ gmac-config {
+ device = <&gmac>;
+
+ switch-phy-addr-swap = <1>;
+ switch-phy-swap = <1>;
+ };
+};
+
+&mdio1 {
+ status = "okay";
+};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar9331.dtsi"
-
-/ {
- model = "Embedded Wireless Dorin";
- compatible = "embeddedwireless,dorin";
-
- aliases {
- serial0 = &uart;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- status {
- label = "dorin:green:status";
- gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <100>;
-
- wps {
- label = "wps";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- };
-
- reset {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&uart {
- status = "okay";
-};
-
-&gpio {
- status = "okay";
-};
-
-&usb {
- dr_mode = "host";
- status = "okay";
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&spi {
- num-chipselects = <1>;
- status = "okay";
-
- spiflash {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <104000000>;
- reg = <0>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x000000 0x040000>;
- read-only;
- };
-
- partition@1 {
- label = "u-boot-env";
- reg = <0x040000 0x010000>;
- };
-
- partition@2 {
- label = "firmware";
- reg = <0x050000 0xfa0000>;
- };
-
- art: partition@3 {
- label = "ART";
- reg = <0xff0000 0x010000>;
- read-only;
- };
- };
- };
-};
-
-ð1 {
- status = "okay";
-
- mtd-mac-address = <&art 0x1002>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-
- gmac-config {
- device = <&gmac>;
-
- switch-phy-addr-swap = <1>;
- switch-phy-swap = <1>;
- };
-};
-
-&mdio1 {
- status = "okay";
-};
/ {
model = "Onion Omega";
- compatible = "onion,omega";
+ compatible = "onion,omega", "qca,ar9331";
aliases {
serial0 = &uart;
/ {
model = "TP-Link TL-MR3020";
- compatible = "tplink,tl-mr3020";
+ compatible = "tplink,tl-mr3020", "qca,ar9331";
aliases {
serial0 = &uart;
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "qca9557.dtsi"
-
-/ {
- compatible = "openmesh,om5p-ac-v2", "qca,qca9557";
- model = "OpenMesh OM5P-AC V2";
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x8000000>;
- };
-
- extosc: ref {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-output-names = "ref";
- clock-frequency = <40000000>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- power {
- label = "om5pac:blue:power";
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- wifi_green {
- label = "om5pac:green:wifi";
- gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- wifi_yellow {
- label = "om5pac:yellow:wifi";
- gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- wifi_red {
- label = "om5pac:red:wifi";
- gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <100>;
-
- button@0 {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio-export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- gpio_pa_dcdc {
- gpio-export,name = "om5pac:pa_dcdc";
- gpio-export,output = <1>;
- gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
- };
- gpio_pa_high {
- gpio-export,name = "om5pac:pa_high";
- gpio-export,output = <1>;
- gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&pinmux {
- pinmux_pa_dcdc_pins {
- pinctrl-single,bits = <0x0 0xff00 0x0>;
- };
-
- pinmux_pa_high_pins {
- pinctrl-single,bits = <0x10 0xff 0x0>;
- };
-};
-
-&pcie0 {
- status = "okay";
-};
-
-&uart {
- status = "okay";
-};
-
-&pll {
- clocks = <&extosc>;
-};
-
-&spi {
- status = "okay";
- num-cs = <1>;
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "mx25l12805d";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x000000 0x040000>;
- read-only;
- };
-
- partition@1 {
- label = "u-boot-env";
- reg = <0x040000 0x010000>;
- };
-
- partition@2 {
- label = "firmware";
- reg = <0x850000 0x7a0000>;
- };
-
- partition@3 {
- label = "ART";
- reg = <0xff0000 0x010000>;
- read-only;
- };
- };
- };
-};
-
-&mdio0 {
- status = "okay";
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- phy-mode = "rgmii-id";
- };
-};
-
-&mdio1 {
- status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- phy-mode = "sgmii";
- };
-};
-
-ð0 {
- status = "okay";
-
- phy-handle = <&phy4>;
- phy-mode = "rgmii";
-};
-
-ð1 {
- status = "okay";
-
- phy-handle = <&phy1>;
- phy-mode = "sgmii";
-};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca9557.dtsi"
+
+/ {
+ compatible = "openmesh,om5p-ac-v2", "qca,qca9557";
+ model = "OpenMesh OM5P-AC V2";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ extosc: ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "ref";
+ clock-frequency = <40000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "om5pac:blue:power";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ wifi_green {
+ label = "om5pac:green:wifi";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ wifi_yellow {
+ label = "om5pac:yellow:wifi";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ wifi_red {
+ label = "om5pac:red:wifi";
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <100>;
+
+ button@0 {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ gpio_pa_dcdc {
+ gpio-export,name = "om5pac:pa_dcdc";
+ gpio-export,output = <1>;
+ gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+ };
+ gpio_pa_high {
+ gpio-export,name = "om5pac:pa_high";
+ gpio-export,output = <1>;
+ gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&pinmux {
+ pinmux_pa_dcdc_pins {
+ pinctrl-single,bits = <0x0 0xff00 0x0>;
+ };
+
+ pinmux_pa_high_pins {
+ pinctrl-single,bits = <0x10 0xff 0x0>;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&uart {
+ status = "okay";
+};
+
+&pll {
+ clocks = <&extosc>;
+};
+
+&spi {
+ status = "okay";
+ num-cs = <1>;
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mx25l12805d";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@1 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ partition@2 {
+ label = "firmware";
+ reg = <0x850000 0x7a0000>;
+ };
+
+ partition@3 {
+ label = "ART";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii-id";
+ };
+};
+
+&mdio1 {
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ phy-mode = "sgmii";
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&phy4>;
+ phy-mode = "rgmii";
+};
+
+ð1 {
+ status = "okay";
+
+ phy-handle = <&phy1>;
+ phy-mode = "sgmii";
+};
endef
#TARGET_DEVICES += ubnt-airrouter
-define Device/ubnt-bullet-m
+define Device/ubnt_bullet-m
$(Device/ubnt-xm)
DEVICE_TITLE := Ubiquiti Bullet-M
BOARDNAME := UBNT-BM
endef
-TARGET_DEVICES += ubnt-bullet-m
+TARGET_DEVICES += ubnt_bullet-m
-define Device/ubnt-rocket-m
+define Device/ubnt_rocket-m
$(Device/ubnt-xm)
DEVICE_TITLE := Ubiquiti Rocket-M
BOARDNAME := UBNT-RM
endef
-TARGET_DEVICES += ubnt-rocket-m
+TARGET_DEVICES += ubnt_rocket-m
-define Device/ubnt-nano-m
+define Device/ubnt_nano-m
$(Device/ubnt-xm)
DEVICE_TITLE := Ubiquiti Nano-M
BOARDNAME := UBNT-NM
endef
-TARGET_DEVICES += ubnt-nano-m
+TARGET_DEVICES += ubnt_nano-m
-define Device/ubnt-unifi
+define Device/ubnt_unifi
$(Device/ubnt-bz)
ATH_SOC := ar7241
DEVICE_TITLE := Ubiquiti UniFi
BOARDNAME := UBNT-UF
DEVICE_PROFILE += UBNTUNIFI
endef
-TARGET_DEVICES += ubnt-unifi
+TARGET_DEVICES += ubnt_unifi
define Device/ubnt-unifiac
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
$(call Build/uImage,$(1) -M $(NETGEAR_KERNEL_MAGIC))
endef
-define Device/ew_dorin
+define Device/embeddedwireless_dorin
ATH_SOC := ar9331
DEVICE_TITLE := Embedded Wireless Dorin
DEVICE_PACKAGES := kmod-usb-chipidea2
endef
-TARGET_DEVICES += ew_dorin
+TARGET_DEVICES += embeddedwireless_dorin
-define Device/gl_ar150
+define Device/glinet_ar150
ATH_SOC := ar9330
DEVICE_TITLE := GL.iNet GL-AR150
DEVICE_PACKAGES := kmod-usb-chipidea2
IMAGE_SIZE := 16000k
endef
-TARGET_DEVICES += gl_ar150
+TARGET_DEVICES += glinet_ar150
-define Device/om5p_ac
+define Device/openmesh_om5p-ac-v2
ATH_SOC := qca9558
- DEVICE_TITLE := OpenMesh OM5P-AC
+ DEVICE_TITLE := OpenMesh OM5P-AC v2
DEVICE_PROFILE := OM5P-AC
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x om-watchdog
endef
-TARGET_DEVICES += om5p_ac
+TARGET_DEVICES += openmesh_om5p-ac-v2
define Device/netgear_wndr3700
ATH_SOC:=ar7100
projects / openwrt / openwrt.git / commitdiff