--- /dev/null
+/*
+ * EnGenius ENS202EXT board support
+ *
+ * Copyright (C) 2017 Marty Plummer <netz.kernel@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ath79.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "nvram.h"
+
+#define ENS202_GPIO_LED_WLAN4 0
+#define ENS202_GPIO_LED_POWER 14
+#define ENS202_GPIO_LED_WLAN2 16
+#define ENS202_GPIO_LED_WLAN3 17
+#define ENS202_GPIO_LED_WLAN1 18
+
+#define ENS202_GPIO_BTN_RESET 1
+
+#define ENS202_KEYS_POLL_INTERVAL 20 /* msecs */
+#define ENS202_KEYS_DEBOUNCE_INTERVAL (3 * ENS202_KEYS_POLL_INTERVAL)
+
+static struct gpio_led ens202_leds_gpio[] __initdata = {
+ {
+ .name = "engenius:amber:wlan1",
+ .gpio = ENS202_GPIO_LED_WLAN1,
+ .active_low = 1,
+ }, {
+ .name = "engenius:red:wlan2",
+ .gpio = ENS202_GPIO_LED_WLAN2,
+ .active_low = 1,
+ }, {
+ .name = "engenius:amber:wlan3",
+ .gpio = ENS202_GPIO_LED_WLAN3,
+ .active_low = 1,
+ }, {
+ .name = "engenius:green:wlan4",
+ .gpio = ENS202_GPIO_LED_WLAN4,
+ .active_low = 1,
+ }, {
+ .name = "engenius:amber:power",
+ .gpio = ENS202_GPIO_LED_POWER,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button ens202_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = ENS202_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ENS202_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+static void __init ens202_setup(void)
+{
+ const char *nvram = (char *) KSEG1ADDR(0x1f040000);
+ u8 mac_buff[6];
+ u8 *mac = NULL;
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ if (ath79_nvram_parse_mac_addr(nvram, 0x10000,
+ "ethaddr=", mac_buff) == 0) {
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac_buff, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac_buff, 1);
+ mac = mac_buff;
+ }
+
+ ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
+
+ ath79_gpio_output_select(ENS202_GPIO_LED_POWER, AR934X_GPIO_OUT_GPIO);
+ ath79_gpio_output_select(ENS202_GPIO_LED_WLAN1, AR934X_GPIO_OUT_GPIO);
+ ath79_gpio_output_select(ENS202_GPIO_LED_WLAN2, AR934X_GPIO_OUT_GPIO);
+ ath79_gpio_output_select(ENS202_GPIO_LED_WLAN3, AR934X_GPIO_OUT_GPIO);
+ ath79_gpio_output_select(ENS202_GPIO_LED_WLAN4, AR934X_GPIO_OUT_GPIO);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ens202_leds_gpio),
+ ens202_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, ENS202_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ens202_gpio_keys),
+ ens202_gpio_keys);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_wmac(art + 0x1000, NULL);
+
+ ath79_register_mdio(1, 0);
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
+ AR934X_ETH_CFG_SW_ONLY_MODE);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
+ ath79_eth0_pll_data.pll_1000 = 0x06000000;
+
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+}
+
+MIPS_MACHINE(ATH79_MACH_ENS202EXT, "ENS202EXT", "EnGenius ENS202EXT",
+ ens202_setup);
--- /dev/null
+define Build/senao-factory-image
+ $(eval board=$(word 1,$(1)))
+ $(eval rootfs=$(word 2,$(1)))
+
+ mkdir -p $@.senao
+
+ touch $@.senao/FWINFO-OpenWrt-$(REVISION)-$(board)
+ $(CP) $(IMAGE_KERNEL) $@.senao/openwrt-senao-$(board)-uImage-lzma.bin
+ $(CP) $(rootfs) $@.senao/openwrt-senao-$(board)-root.squashfs
+
+ $(TAR) -czf $@ -C $@.senao .
+ rm -rf $@.senao
+endef
+
+define Device/ens202ext
+ DEVICE_TITLE := EnGenius ENS202EXT
+ BOARDNAME := ENS202EXT
+ DEVICE_PACKAGES += rssileds
+ KERNEL_SIZE := 1536k
+ KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma | check-size $$(KERNEL_SIZE)
+ IMAGE_SIZE := 12096k
+ IMAGES += factory.bin
+ IMAGE/factory.bin/squashfs := append-rootfs | pad-rootfs | senao-factory-image ens202ext $$$$@
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom)ro,13632k(firmware),2048k(failsafe)ro,64k(art)ro
+endef
+TARGET_DEVICES += ens202ext
projects / openwrt / openwrt.git / commitdiff