--- /dev/null
+/*
+ * ALFA Network AP91-5G board support
+ *
+ * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+
+#define AP91_5G_GPIO_LED_LAN 17
+#define AP91_5G_GPIO_LED_SIGNAL1 12
+#define AP91_5G_GPIO_LED_SIGNAL2 8
+#define AP91_5G_GPIO_LED_SIGNAL3 6
+#define AP91_5G_GPIO_LED_SIGNAL4 7
+
+#define AP91_5G_GPIO_WDT_EN 1
+#define AP91_5G_GPIO_WDT_IN 0
+
+#define AP91_5G_GPIO_BTN_RESET 11
+
+#define AP91_5G_KEYS_POLL_INTERVAL 20
+#define AP91_5G_KEYS_DEBOUNCE_INTERVAL (3 * AP91_5G_KEYS_POLL_INTERVAL)
+
+#define AP91_5G_WMAC_CALDATA_OFFSET 0x1000
+
+static struct gpio_led ap91_5g_leds_gpio[] __initdata = {
+ {
+ .name = "ap91-5g:green:lan",
+ .gpio = AP91_5G_GPIO_LED_LAN,
+ .active_low = 1,
+ }, {
+ .name = "ap91-5g:red:signal1",
+ .gpio = AP91_5G_GPIO_LED_SIGNAL1,
+ .active_low = 1,
+ }, {
+ .name = "ap91-5g:orange:signal2",
+ .gpio = AP91_5G_GPIO_LED_SIGNAL2,
+ .active_low = 1,
+ }, {
+ .name = "ap91-5g:green:signal3",
+ .gpio = AP91_5G_GPIO_LED_SIGNAL3,
+ .active_low = 1,
+ }, {
+ .name = "ap91-5g:green:signal4",
+ .gpio = AP91_5G_GPIO_LED_SIGNAL4,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button ap91_5g_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = AP91_5G_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = AP91_5G_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+};
+
+static void __init ap91_5g_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE,
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+ gpio_set_value(AP91_5G_GPIO_LED_LAN, 1);
+ gpio_set_value(AP91_5G_GPIO_LED_SIGNAL3, 1);
+ gpio_set_value(AP91_5G_GPIO_LED_SIGNAL4, 1);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_mdio(0, 0x0);
+
+ /* LAN */
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = BIT(4);
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_init_mac(ath79_eth0_data.mac_addr, art, 0);
+ ath79_register_eth(0);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap91_5g_leds_gpio),
+ ap91_5g_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, AP91_5G_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ap91_5g_gpio_keys),
+ ap91_5g_gpio_keys);
+
+ gpio_request_one(AP91_5G_GPIO_WDT_IN,
+ GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
+ "WDT input");
+
+ gpio_request_one(AP91_5G_GPIO_WDT_EN,
+ GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
+ "WDT enable");
+
+ ap91_pci_init(art + AP91_5G_WMAC_CALDATA_OFFSET, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_AP91_5G, "AP91-5G", "ALFA Network AP91-5G",
+ ap91_5g_setup);
DEVICE_VARS += DAP_SIGNATURE NETGEAR_BOARD_ID NETGEAR_HW_ID NETGEAR_KERNEL_MAGIC ROOTFS_SIZE SEAMA_SIGNATURE
+define Build/alfa-network-rootfs-header
+ mkimage \
+ -A mips -O linux -T filesystem -C lzma -a 0 -e 0 \
+ -n 'RootfsImage' -d $@ $@.new
+ @mv $@.new $@
+endef
+
define Build/mkbuffaloimg
$(STAGING_DIR_HOST)/bin/mkbuffaloimg -B $(BOARDNAME) \
-R $$(($(subst k, * 1024,$(ROOTFS_SIZE)))) \
endef
TARGET_DEVICES += ap90q
+define Device/ap91-5g
+ DEVICE_TITLE := ALFA Network AP91-5G
+ DEVICE_PACKAGES := rssileds -swconfig
+ BOARDNAME := AP91-5G
+ IMAGE_SIZE := 7744k
+ KERNEL_SIZE := 1600k
+ ROOTFS_SIZE := 6144k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),6144k(rootfs),1600k(kernel),64k(config)ro,64k(art)ro,7744k@0x50000(firmware)
+ IMAGES := sysupgrade.bin factory.bin
+ IMAGE/factory.bin := append-rootfs | pad-rootfs |\
+ alfa-network-rootfs-header | append-kernel | check-size $$$$(IMAGE_SIZE)
+ IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs |\
+ pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE)
+endef
+TARGET_DEVICES += ap91-5g
+
define Device/arduino-yun
DEVICE_TITLE := Arduino Yun
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
projects / openwrt / openwrt.git / commitdiff