firmware-utils: tplink-safeloader: support strings as soft_version
authorJan Niehusmann <jan@gondor.com>
Fri, 19 May 2017 07:42:24 +0000 (09:42 +0200)
committerPiotr Dymacz <pepe2k@gmail.com>
Sun, 11 Jun 2017 17:06:49 +0000 (19:06 +0200)
Some TP-Link routers (C25, C59, C60) contain a version string instead
of a binary structure in the soft_version partition.

Flashing LEDE from the original firmware's GUI, this version string
taken from the soft_ver partition of the firmware image is written to
the router's config partition.

When using tftp recovery to go back to the original Archer C25 firmware,
a version check compares that version to the version of the firmware to
be flashed.

Without proper contents in the config partition, reverting to the
original firmware fails.

Therefore, write the string "soft_ver:1.0.0\n" to that soft_ver
partition.

Signed-off-by: Jan Niehusmann <jan@gondor.com>
tools/firmware-utils/src/tplink-safeloader.c

index 19d67c3f42654213c510e4c129eed879eac04bed..9c9efc369c23e068687d37122aa8b4879a49d096 100644 (file)
@@ -75,6 +75,7 @@ struct device_info {
        const char *vendor;
        const char *support_list;
        char support_trail;
+       const char *soft_ver;
        const struct flash_partition_entry partitions[MAX_PARTITIONS+1];
        const char *first_sysupgrade_partition;
        const char *last_sysupgrade_partition;
@@ -130,6 +131,7 @@ static struct device_info boards[] = {
                        "CPE220(TP-LINK|US|N300-2):1.1\r\n"
                        "CPE220(TP-LINK|EU|N300-2):1.1\r\n",
                .support_trail = '\xff',
+               .soft_ver = NULL,
 
                .partitions = {
                        {"fs-uboot", 0x00000, 0x20000},
@@ -167,6 +169,7 @@ static struct device_info boards[] = {
                        "CPE520(TP-LINK|US|N300-5):1.1\r\n"
                        "CPE520(TP-LINK|EU|N300-5):1.1\r\n",
                .support_trail = '\xff',
+               .soft_ver = NULL,
 
                .partitions = {
                        {"fs-uboot", 0x00000, 0x20000},
@@ -198,6 +201,7 @@ static struct device_info boards[] = {
                        "WBS210(TP-LINK|US|N300-2):1.20\r\n"
                        "WBS210(TP-LINK|EU|N300-2):1.20\r\n",
                .support_trail = '\xff',
+               .soft_ver = NULL,
 
                .partitions = {
                        {"fs-uboot", 0x00000, 0x20000},
@@ -229,6 +233,7 @@ static struct device_info boards[] = {
                        "WBS510(TP-LINK|US|N300-5):1.20\r\n"
                        "WBS510(TP-LINK|EU|N300-5):1.20\r\n",
                .support_trail = '\xff',
+               .soft_ver = NULL,
 
                .partitions = {
                        {"fs-uboot", 0x00000, 0x20000},
@@ -259,6 +264,7 @@ static struct device_info boards[] = {
                        "SupportList:\r\n"
                        "{product_name:Archer C2600,product_ver:1.0.0,special_id:00000000}\r\n",
                .support_trail = '\x00',
+               .soft_ver = NULL,
 
                .partitions = {
                        {"SBL1", 0x00000, 0x20000},
@@ -303,6 +309,7 @@ static struct device_info boards[] = {
                        "{product_name:Archer C59,product_ver:1.0.0,special_id:45550000}\r\n"
                        "{product_name:Archer C59,product_ver:1.0.0,special_id:55530000}\r\n",
                .support_trail = '\x00',
+               .soft_ver = "soft_ver:1.0.0\n",
 
                .partitions = {
                        {"fs-uboot", 0x00000, 0x10000},
@@ -340,6 +347,7 @@ static struct device_info boards[] = {
                        "{product_name:Archer C60,product_ver:1.0.0,special_id:45550000}\r\n"
                        "{product_name:Archer C60,product_ver:1.0.0,special_id:55530000}\r\n",
                .support_trail = '\x00',
+               .soft_ver = "soft_ver:1.0.0\n",
 
                .partitions = {
                        {"fs-uboot", 0x00000, 0x10000},
@@ -374,6 +382,7 @@ static struct device_info boards[] = {
                        "product_ver:2.0.0,"
                        "special_id:00000000}\r\n",
                .support_trail = '\x00',
+               .soft_ver = NULL,
 
                .partitions = {
                        {"fs-uboot", 0x00000, 0x40000},
@@ -408,6 +417,7 @@ static struct device_info boards[] = {
                        "product_ver:1.0.0,"
                        "special_id:00000000}\n",
                .support_trail = '\x00',
+               .soft_ver = NULL,
 
                .partitions = {
                        {"fs-uboot", 0x00000, 0x40000},
@@ -440,6 +450,7 @@ static struct device_info boards[] = {
                        "SupportList:\r\n"
                        "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
                .support_trail = '\xff',
+               .soft_ver = NULL,
 
                .partitions = {
                        {"fs-uboot", 0x00000, 0x20000},
@@ -478,6 +489,7 @@ static struct device_info boards[] = {
                        "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:41550000}\n"
                        "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:52550000}\n",
                .support_trail = '\x00',
+               .soft_ver = NULL,
 
                /**
                   576KB were moved from file-system to os-image
@@ -512,6 +524,7 @@ static struct device_info boards[] = {
                        "SupportList:\n"
                        "{product_name:TL-WR1043ND,product_ver:4.0.0,special_id:45550000}\n",
                .support_trail = '\x00',
+               .soft_ver = NULL,
 
                /**
                    We use a bigger os-image partition than the stock images (and thus
@@ -555,6 +568,7 @@ static struct device_info boards[] = {
                        "{product_name:RE450,product_ver:1.0.0,special_id:4B520000}\r\n"
                        "{product_name:RE450,product_ver:1.0.0,special_id:55534100}\r\n",
                .support_trail = '\x00',
+               .soft_ver = NULL,
 
                /**
                   The flash partition table for RE450;
@@ -683,6 +697,23 @@ static struct image_partition_entry make_soft_version(uint32_t rev) {
        return entry;
 }
 
+static struct image_partition_entry make_soft_version_from_string(const char *soft_ver) {
+       /** String length _including_ the terminating zero byte */
+       uint32_t ver_len = strlen(soft_ver) + 1;
+       /** Partition contains 64 bit header, the version string, and one additional null byte */
+       size_t partition_len = 2*sizeof(uint32_t) + ver_len + 1;
+       struct image_partition_entry entry = alloc_image_partition("soft-version", partition_len);
+
+       uint32_t *len = (uint32_t *)entry.data;
+       len[0] = htonl(ver_len);
+       len[1] = 0;
+       memcpy(&len[2], soft_ver, ver_len);
+
+       entry.data[partition_len - 1] = 0;
+
+       return entry;
+}
+
 /** Generates the support-list partition */
 static struct image_partition_entry make_support_list(const struct device_info *info) {
        size_t len = strlen(info->support_list);
@@ -913,7 +944,11 @@ static void build_image(const char *output,
        struct image_partition_entry parts[6] = {};
 
        parts[0] = make_partition_table(info->partitions);
-       parts[1] = make_soft_version(rev);
+       if (info->soft_ver)
+               parts[1] = make_soft_version_from_string(info->soft_ver);
+       else
+               parts[1] = make_soft_version(rev);
+
        parts[2] = make_support_list(info);
        parts[3] = read_file("os-image", kernel_image, false);
        parts[4] = read_file("file-system", rootfs_image, add_jffs2_eof);