1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
|
package babeld
config general
# option 'multicast_address' 'ff02:0:0:0:0:0:1:6'
# option 'port' '6696'
# option 'state_file' '/var/lib/babel-state'
# option 'hello_interval' '4'
# option 'wired_hello_interval' '20'
# option 'diversity' '0,128'
# option 'smoothing_half_time' '4'
# option 'kernel_priority' '0'
# Do not use this option unless you know what you are doing, as it can
# cause persistent route flapping.
## option 'duplication_priority' '0'
# option 'carrier_sense' 'false'
# option 'assume_wireless' 'false'
# option 'no_split_horizon' 'false'
# option 'debug' '0'
# Listen for connections from a front-end, e.g. on port 33123.
## option 'local_server' '33123'
# option 'random_router_id' 'false'
# Keep unfeasible routes
## option 'keep_unfeasible' 'false'
# Use the given kernel routing table for routes inserted by babeld.
## option 'export_table' '0'
# Export routes from the given kernel routing tables.
## list 'import_table' '0'
## list 'import_table' '42'
# The configuration file is not necessary since you can do everything
# from this file.
# option 'conf_file' '/etc/babeld.conf'
# option 'log_file' '/var/log/babeld.log'
# You can use aliases (like lan, wlan) or real names (like eth0.0).
# If you use an alias, it must be already defined when babeld starts.
# Otherwise, the name is taken literally and the interface can be
# brought up later (useful for tunnels for instance).
config interface wlan
# Remove this line to enable babeld on this interface
option 'ignore' 'true'
# option 'wired' 'auto'
# option 'link_quality' 'auto'
# option 'split_horizon' 'auto'
# The default is 96 for wired interfaces, and 256 for wireless ones
## option 'rxcost' '256'
# The default is specified with the -h and -H command-line flags.
## option 'hello_interval' '4'
# This can be set to a fairly large value, unless significant
# packet loss is expected. The default is four times the hello
# interval.
## option 'update_interval' '16'
# Options to enable and configure RTT-based metric
## option 'enable_timestamps' 'false'
## option 'max_rtt_penalty' '0'
## option 'rtt_decay' '42'
## option 'rtt_min' '10'
## option 'rtt_max' '120'
config interface lan
option 'ignore' 'true'
# A filter consists in a type ('in', 'out' or 'redistribute'), an action
# ('allow', 'deny' or 'metric xxx') and a set of selectors ('ip', 'eq',
# etc.). See /etc/babeld.conf for more details.
# Here is a sample filter wich redistributes the default route if its
# protocol number is "boot", e.g. when it installed by dhcp. It is
# disabled by default.
config filter
option 'ignore' 'true'
# Type
option 'type' 'redistribute'
# Selectors: ip, eq, le, ge, neigh, id, proto, local, if
option 'ip' '0.0.0.0/0'
option 'le' '0'
option 'proto' '3'
# Action
option 'action' 'metric 128'
|
