Felix Fietkau [Mon, 2 Jun 2014 16:24:12 +0000 (16:24 +0000)]
ar71xx: fix compile error in r40969, refresh patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40977
John Crispin [Mon, 2 Jun 2014 15:02:54 +0000 (15:02 +0000)]
ar71xx: WNDAP360 adding wifi LED support
I added WIFI LED support (so now AP blinks nicely), I removed WPS
button GPIO (as it doesn't exist) and changed GPIO for reset button.
Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
SVN-Revision: 40976
John Crispin [Mon, 2 Jun 2014 14:56:41 +0000 (14:56 +0000)]
ar71xx: add profile and build image for HiWiFi HC6361.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 40975
John Crispin [Mon, 2 Jun 2014 14:56:35 +0000 (14:56 +0000)]
ar71xx: add user-space support for HiWiFi HC6361 board.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 40974
John Crispin [Mon, 2 Jun 2014 14:56:24 +0000 (14:56 +0000)]
ar71xx: add kernel support for HiWiFi HC6361.
This board manufactured by HiWiFi has the following features.
- Atheros 9331 SoC.
- 16MB flash and 64MB RAM.
- 4GB eMMC storage via SK6226 USB 2.0 controller.
- 2 LAN and 1 WAN ethernet ports with LEDs on them.
- 3 blue LEDs on the front panel.
- 1 button labeled as "reset".
- Powered by a USB cable.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 40973
John Crispin [Mon, 2 Jun 2014 14:45:25 +0000 (14:45 +0000)]
ar71xx: add support to TP-LINK TL-WA730RE v1
The TL-WA730RE seems to be almost identical to TL-WA701ND, just
that it comes without PoE and a stock-firmware claiming the device
to be a "Range Extender".
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 40972
John Crispin [Mon, 2 Jun 2014 14:45:21 +0000 (14:45 +0000)]
ar71xx: fix board detection for TL-WA7510N
Detect TL-WA7510N v1 by the board name as defined in mach-tl-wa901nd.c
and add hardware ID to tplink_board_detect
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 40971
John Crispin [Mon, 2 Jun 2014 14:45:17 +0000 (14:45 +0000)]
ar71xx: enable sysupgrade on wnr2000-v3
tested, works.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 40970
John Crispin [Mon, 2 Jun 2014 14:43:35 +0000 (14:43 +0000)]
ar71xx: add support for dlink dir-615-e1
Dlink dir-615-e1 can use dir-600-a1's image, but the image can't be
uploaded through dlink's normal firmware update web page.
Add profile for dir-615-e1 so the generated image can be uploaded
through the firmware update web page.
Signed-off-by: Zhao, Gang <gamerh2o@gmail.com>
SVN-Revision: 40969
Felix Fietkau [Mon, 2 Jun 2014 13:27:31 +0000 (13:27 +0000)]
target/imagebuilder: add missing package index (fixes #16675)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40968
Felix Fietkau [Mon, 2 Jun 2014 13:27:23 +0000 (13:27 +0000)]
scripts/bundle-libraries: fall back to only copying binaries if ldd is unavailable (e.g. non-linux system)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40967
John Crispin [Mon, 2 Jun 2014 13:21:52 +0000 (13:21 +0000)]
ar71xx: adjust OM2P profile for the OpenMesh OM2P-HSv2 board
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 40966
John Crispin [Mon, 2 Jun 2014 13:21:47 +0000 (13:21 +0000)]
package/uboot-envtools: add OpenMesh OM2P-HSv2 support
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 40965
John Crispin [Mon, 2 Jun 2014 13:21:43 +0000 (13:21 +0000)]
package/om-watchdog: add OpenMesh OM2P-HSv2 support
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 40964
John Crispin [Mon, 2 Jun 2014 13:21:38 +0000 (13:21 +0000)]
ar71xx: add sysupgrade support for OpenMesh OM2P-HSv2
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 40963
John Crispin [Mon, 2 Jun 2014 13:21:31 +0000 (13:21 +0000)]
ar71xx: add user-space support for OpenMesh OM2P-HSv2
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 40962
John Crispin [Mon, 2 Jun 2014 13:21:26 +0000 (13:21 +0000)]
ar71xx: add kernel support for the OpenMesh OM2P-HSv2
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 40961
John Crispin [Mon, 2 Jun 2014 13:21:22 +0000 (13:21 +0000)]
ar71xx: adjust OM2P profile for the OpenMesh OM2Pv2 board
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 40960
John Crispin [Mon, 2 Jun 2014 13:21:17 +0000 (13:21 +0000)]
package/uboot-envtools: add OpenMesh OM2Pv2 support
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 40959
John Crispin [Mon, 2 Jun 2014 13:21:11 +0000 (13:21 +0000)]
package/om-watchdog: add OpenMesh OM2Pv2 support
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 40958
John Crispin [Mon, 2 Jun 2014 13:21:07 +0000 (13:21 +0000)]
ar71xx: add sysupgrade support for OpenMesh OM2Pv2
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 40957
John Crispin [Mon, 2 Jun 2014 13:21:02 +0000 (13:21 +0000)]
ar71xx: add user-space support for OpenMesh OM2Pv2
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 40956
John Crispin [Mon, 2 Jun 2014 13:20:52 +0000 (13:20 +0000)]
ar71xx: add kernel support for the OpenMesh OM2Pv2 board
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 40955
John Crispin [Mon, 2 Jun 2014 13:10:53 +0000 (13:10 +0000)]
iwinfo: update nl80211 api to the latest one
modified version of http://patchwork.openwrt.org/patch/4533/
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40954
John Crispin [Mon, 2 Jun 2014 13:10:49 +0000 (13:10 +0000)]
iwinfo: add 802.11ac hwmode support
In case of .11ac device the hwmode was not properly displayed.
This patch fixes it.
Signed-off-by: Marek Kwaczynski <marek.kwaczynski@tieto.com>
Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
SVN-Revision: 40953
John Crispin [Mon, 2 Jun 2014 13:10:44 +0000 (13:10 +0000)]
iwinfo: add Atheros AR9580 to hardware.txt
Signed-off-by: Stefan Agner <stefan@agner.ch>
SVN-Revision: 40952
John Crispin [Mon, 2 Jun 2014 13:03:15 +0000 (13:03 +0000)]
config/Config-images.in: the ext4 series introduced a regression
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40951
Felix Fietkau [Mon, 2 Jun 2014 13:01:48 +0000 (13:01 +0000)]
polarssl: enable parallel build
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40950
Felix Fietkau [Mon, 2 Jun 2014 13:01:44 +0000 (13:01 +0000)]
polarssl: remove polarssl-progs, it is just a random collection of test programs
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40949
John Crispin [Mon, 2 Jun 2014 12:45:29 +0000 (12:45 +0000)]
lantiq: fix up eth_mac and ath_eep support
this patch got messed up by the last rebase
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40948
John Crispin [Mon, 2 Jun 2014 12:45:25 +0000 (12:45 +0000)]
x86: Compile xen-pci-frontend as module
modified version of -> http://patchwork.openwrt.org/patch/5535/
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40947
John Crispin [Mon, 2 Jun 2014 12:45:22 +0000 (12:45 +0000)]
include: Allow git kernel branch selection
This allows the selection of a specific branch in the menuconfig
when using a kernel downloaded from GIT.
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>
SVN-Revision: 40946
John Crispin [Mon, 2 Jun 2014 12:45:19 +0000 (12:45 +0000)]
include: Clean-up kernel git command options management
The way git options are managed in kernel-defaults.mk makes additions
difficult. If requires different code path for each option; it's
ok so far as we handle only one option, but if we want to make the git
clone mechanism more flexible, more option will be required, which
will become tedious.
So; we'll move the GIT options into a variable, that may or may not be
set depending on the configuration, and we'll pass this variable to the
git command.
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>
SVN-Revision: 40945
John Crispin [Mon, 2 Jun 2014 12:45:16 +0000 (12:45 +0000)]
config: Remove KERNEL_GIT_LOCAL_REPOSITORY option
The GIT_LOCAL_REPOSITORY option adds the --reference argument to the
git clone kernel command line, if KERNEL_GIT_CLONE_URI is set.
This option is intended to speed-up the repo creation by using local
objets rather than downloading it. However, a local repo can be cloned
much faster by setting GIT_LOCAL_REPOSITORY directly to the local tree.
In that case, git clone will bypass the normal "git aware" transport
mechanism and clone the repository by copying and hardlinking objects
rather than downloading it, resulting in a significant speed increase.
That makes the GIT_LOCAL_REPOSITORY option pretty useless so we'll just
remove it and recommand the usage of KERNEL_GIT_CLONE_URI directly.
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>
SVN-Revision: 40944
John Crispin [Mon, 2 Jun 2014 12:45:13 +0000 (12:45 +0000)]
base-files: Allow installation of symlinks using RAMFS_COPY_BIN env var.
http://patchwork.openwrt.org/patch/5086/
Signed-off-by: karl.vogel@gmail.com
SVN-Revision: 40943
John Crispin [Mon, 2 Jun 2014 12:45:09 +0000 (12:45 +0000)]
comgt: add support for defining dial number in config file
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
SVN-Revision: 40942
John Crispin [Mon, 2 Jun 2014 12:45:05 +0000 (12:45 +0000)]
kernel: Fix xen domU kmod-xen-kbd package
modified version of http://patchwork.openwrt.org/patch/5526/
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40941
John Crispin [Mon, 2 Jun 2014 12:45:01 +0000 (12:45 +0000)]
soloscli: upgrade to 1.04
- The package does not compile at the moment. Since there is a new
upstream version avaiable, use this new source instead.
- Upstream has already included our both patches.
- This is only compile tested, since I do not own any test hardware.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 40940
John Crispin [Mon, 2 Jun 2014 12:44:57 +0000 (12:44 +0000)]
ralink: fix asiarf/awm002 switch setup
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40939
John Crispin [Mon, 2 Jun 2014 12:44:54 +0000 (12:44 +0000)]
mac80211: query driver for max A-MPDU length exponent
This patch enables netifd to query 802.11ac-driver for the maximum
supported A-MPDU length exponent, possibly increasing VHT throughput by
more aggressive frame aggregation.
v2: refreshed patch
Signed-off-by: Matti Laakso <malaakso at elisanet.fi>
SVN-Revision: 40938
John Crispin [Mon, 2 Jun 2014 12:44:51 +0000 (12:44 +0000)]
package: netifd: remove blank line at the end of file
Signed-off-by: Zhao, Gang <gamerh2o@gmail.com>
SVN-Revision: 40937
John Crispin [Mon, 2 Jun 2014 12:44:47 +0000 (12:44 +0000)]
qos-script: Add comments to existing rules
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 40936
John Crispin [Mon, 2 Jun 2014 12:44:44 +0000 (12:44 +0000)]
qos-script: Improve usability by adding comment field to rules
It's quite unconveniet to remember which ports are used by which applications, especially for not so advanced users.
Together with luci patch (discussed on IRC) this improves qos-scripts usability.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 40935
John Crispin [Mon, 2 Jun 2014 12:44:40 +0000 (12:44 +0000)]
hostapd: Add optional support for hostapd own_ip_addr in wireless config
`own_ip_addr` is used by hostapd as NAS-IP-Address.
This is used to identify the AP that is requesting the authentication of the
user and could be used to define which AP's can authenticate users.
Some vendors implement only NAS-Identifier or NAS-IP-Address and not both.
This patch adds ownip as an optional parameter in /etc/config/wireless.
Signed-off-by: Thomas Wouters <thomaswouters@gmail.com>
SVN-Revision: 40934
John Crispin [Mon, 2 Jun 2014 12:44:36 +0000 (12:44 +0000)]
ppp: allow to set PPP interface name via config
allows to set PPP interface name manually via new
network interface option pppname.
If not set, default naming will be used (e.g. pppoe-eth0)
Signed-off-by: Ulrich Weber <uw@ocedo.com>
SVN-Revision: 40933
John Crispin [Mon, 2 Jun 2014 12:44:33 +0000 (12:44 +0000)]
kernel: Enable kmod-hid-generic driver when selecting usb-hid
kmod-hid-generic needs to be selected when enabling usb-hid in order to get generic devices working.
This fixes keyboards support in linux 3.3+ kernels.
https://dev.openwrt.org/ticket/12631
https://dev.openwrt.org/ticket/12686
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 40932
John Crispin [Mon, 2 Jun 2014 12:44:30 +0000 (12:44 +0000)]
openvpn: enable ipv6 parameters
http://patchwork.openwrt.org/patch/4945/
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40931
John Crispin [Mon, 2 Jun 2014 12:44:27 +0000 (12:44 +0000)]
util-linux: Disable sulogin in util-linux package
The sulogin tool doesn't compile because it cannot find shadow.h. As the
tool is not available in openwrt it is now not selected during the build
process.
Signed-off-by: Tjalling Hattink <t.hattink@fugro.nl>
SVN-Revision: 40930
John Crispin [Mon, 2 Jun 2014 12:44:19 +0000 (12:44 +0000)]
uboot-envtools: add support for environment in ubi volume
On UBI enabled devices, U-Boot might store it's environment on
UBI volume(s). Support this in uboot-envtools, so fw_setenv and
fw_printenv can work on these platforms.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 40929
John Crispin [Mon, 2 Jun 2014 12:44:16 +0000 (12:44 +0000)]
fstools: stage libubi-utils static library and headers
Use InstallDev to make libubi-utils available for linking in
uboot-envtools.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 40928
John Crispin [Mon, 2 Jun 2014 12:44:13 +0000 (12:44 +0000)]
package/Makefile: Substituted deprecated -perm +mode with -perm /mode
The find(1) -perm +mode is no longer supported and has been deprecated since
2005.
This could resolve #13855 ticket.
Signed-off-by: Rocco Folino <lordzen87@gmail.com>
SVN-Revision: 40927
John Crispin [Mon, 2 Jun 2014 12:44:10 +0000 (12:44 +0000)]
image: ext4: rename config options as these are only used for ext4 image creation
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 40926
John Crispin [Mon, 2 Jun 2014 12:44:07 +0000 (12:44 +0000)]
image: ext4: allow creation of a journaling filesystem
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 40925
John Crispin [Mon, 2 Jun 2014 12:44:04 +0000 (12:44 +0000)]
image: ext4: allow to choose a block size for the rootfs
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 40924
John Crispin [Mon, 2 Jun 2014 12:43:53 +0000 (12:43 +0000)]
image: ext4: move ext4 specific options into submenu
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 40923
John Crispin [Mon, 2 Jun 2014 12:43:49 +0000 (12:43 +0000)]
ralink: add seama image can be upgrade by sysupgrade
generate sysupgrade image by combine two images.
one is kernel image with seama header.
another is root fs image.
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 40922
John Crispin [Mon, 2 Jun 2014 12:43:46 +0000 (12:43 +0000)]
tools: genext2fs: add support for blocksize != 1024
This patch series is extracted from
http://ftp.de.debian.org/debian/pool/main/g/genext2fs/genext2fs_1.4.1-4.debian.tar.gz
The patches are used in Debian for quite a long time, so I assume that
this is solid material. At least, my Ubuntu host fsck.ext4 does not bark :-)
The goal is to allow building filesystems with larger blocksizes instead of the
current default of 1k. This should improve performance and lifetime when the
filesystem is stored e.g. on a SD card (on Raspberry Pi/I2SE Duckbill for example)
which uses internal flash memory. Writing to flash memory is slow because writing
the data of one block results in erasing a whole erase block of the flash memory.
Thus it is preferable to align the filesystem block size on a flash device with
the erase blocksize, or at least bring it closer to the later one, to avoid
unnecessary write amplification.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 40921
John Crispin [Mon, 2 Jun 2014 12:43:43 +0000 (12:43 +0000)]
lantiq: Fix ARV7510PW22 etop
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 40920
John Crispin [Mon, 2 Jun 2014 12:43:35 +0000 (12:43 +0000)]
lantiq: Fix ARV4518 etop
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 40919
John Crispin [Mon, 2 Jun 2014 12:43:31 +0000 (12:43 +0000)]
lantiq: Add ARV7510PW22 support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 40918
John Crispin [Mon, 2 Jun 2014 12:43:28 +0000 (12:43 +0000)]
kernel: Add kernel modules for USB gadget serial devices.
This patch adds support for building the kernel modules for gadget serial devices.
Signed-off-by: Owen Kirby <osk@exegin.com>
Acked-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 40917
John Crispin [Mon, 2 Jun 2014 12:43:25 +0000 (12:43 +0000)]
iptables: Makefile: only build ip6tc, if IPv6 is enabled
when disabling ipv6, the iptables build breaks without a manul clean or this patch
Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
SVN-Revision: 40916
John Crispin [Mon, 2 Jun 2014 12:43:22 +0000 (12:43 +0000)]
target/linux/*/base-files/lib/upgrade/platform.sh - wrong check for ARGC
ARGC is a 'C-ism', but not known/valid in shell-syntax - insert the correct
var $# (=number of args) here. under normal conditions this had no impact,
but we should at least correct it. the error was observable like this:
root@box:~ [ -e "/etc/functions.sh" ] && . /etc/functions.sh
root@box:~ [ -e "/lib/functions.sh" ] && . /lib/functions.sh
root@box:~ . /lib/upgrade/platform.sh
root@box:~ . /lib/upgrade/common.sh
root@box:~ platform_check_image /tmp/myfirmware.bin
ash: bad number
root@box:~ echo $?
0
Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
SVN-Revision: 40915
John Crispin [Mon, 2 Jun 2014 12:43:16 +0000 (12:43 +0000)]
dropbear: make missing variables local
Signed-off-by: Reiner Herrmann <reiner@reiner-h.de>
SVN-Revision: 40914
John Crispin [Mon, 2 Jun 2014 12:43:13 +0000 (12:43 +0000)]
include: fix kernel download failure with git & local trees
When using the options EXTERNAL_KERNEL_TREE or KERNEL_GIT_CLONE_URI,
the command "make downloads" fails as it tries to download the kernel
tarball despite the option. This doesn't happen during a regular build
as in that case, the dependency is conditionned through the LINUX_SITE
variable, which is not set in these cases.
Below is a snapshot of the error for an target using a 3.14 kernel:
make[3]: *** No rule to make target `.../dl/linux-3.14.tar.xz',
needed by `download'. Stop.
Change-Id: I1244969c1bbf9c81a6a64d68ae88ac58b0f8e79e
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>
SVN-Revision: 40913
John Crispin [Mon, 2 Jun 2014 12:43:10 +0000 (12:43 +0000)]
base-files: remove function service_kill
Function service_kill is deprecated and has no user, so remove it.
Signed-off-by: Zhao, Gang <gamerh2o@gmail.com>
SVN-Revision: 40912
John Crispin [Mon, 2 Jun 2014 12:43:07 +0000 (12:43 +0000)]
ramips: add missing profile for DIR-615-D
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 40911
John Crispin [Mon, 2 Jun 2014 12:43:04 +0000 (12:43 +0000)]
ramips: fix not set lan/wan mac address
The first switch case is default case. Then it will only
match default case. cause not update the lan/wan mac address.
And in the default switch case the param lan_mac is empty.
it will case error message 'arithmetic syntax error' when
call macaddr_add function.
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 40910
John Crispin [Mon, 2 Jun 2014 12:43:00 +0000 (12:43 +0000)]
base-files: add simple shutdown script
Since svn rev [38557] we support power buttons, for example
the ACPI power button on x86 machines.
Add a simple shutdown script to /etc/rc.button, to gracefully shutdown
the machine after the power button is pressed.
Tested on x86 and x86_64 in a kvm virtual machine.
Signed-off-by: Stefan Hellermann <stefan@the2masters.de>
SVN-Revision: 40909
John Crispin [Mon, 2 Jun 2014 12:42:52 +0000 (12:42 +0000)]
ralink: Add support for samsung cy-swr1100 wireless router
It is base on rt3662 soc with dual band 802.11n
wireless router. Use rtl8367R switch chip.
This patch adds a profile for this board.
It use seama image header. so i also enable it
on kernel config.
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 40908
John Crispin [Mon, 2 Jun 2014 12:42:48 +0000 (12:42 +0000)]
ramips: Support for Teltonika RUT5XX
Hi Hartmut,
Thanks for your feedback, I have reformated the patch accordingly.
Added support for Teltonika RUT5XX hardware.
Signed-off-by: Steffen Weinreich <steve@weinreich.org>
SVN-Revision: 40907
John Crispin [Mon, 2 Jun 2014 12:42:44 +0000 (12:42 +0000)]
base-files: calling stop_service before procd_kill.
Before this patch, doing `/e/c/network restart' will emit the folloing
error by `ubus network.wireless down "{}"' because netifd already quit
by that time.
Command failed: not found
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 40906
John Crispin [Mon, 2 Jun 2014 12:42:41 +0000 (12:42 +0000)]
kernel: usb.mk: enable chipidea udc mode
The chipidea USB OTG controller is dual-role and supports both host and device
modes. Enable device mode.
Tested on Gateworks Ventana imx6 board with g_ether.
Are there any other targets out there that use the CHIPIDEA controller? If so
testing is needed for those.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 40905
John Crispin [Mon, 2 Jun 2014 12:42:37 +0000 (12:42 +0000)]
base-files: removes logging
Since logd haven't started at this point, logging does not work.
Signed-off-by: Nuno Goncalves <nunojpg@gmail.com>
SVN-Revision: 40904
John Crispin [Mon, 2 Jun 2014 12:41:45 +0000 (12:41 +0000)]
ralink: Enable Asus RT-N10+ in menuconfig targets
This patch adds "Asus RT-N10+" as a target option in menuconfig. The device has been supported for a while but is currently missing a profile (.mk).
Signed-off-by: Randolph Kuntz <8D961920@galaxymail.org>
SVN-Revision: 40903
Felix Fietkau [Mon, 2 Jun 2014 09:38:09 +0000 (09:38 +0000)]
fstools: update to latest version, fixes build on x86_64
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40902
Luka Perkov [Mon, 2 Jun 2014 09:25:33 +0000 (09:25 +0000)]
kernel: update 3.14 to 3.14.5
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 40901
Steven Barth [Mon, 2 Jun 2014 07:08:16 +0000 (07:08 +0000)]
odhcpd: add configuration for userclass-filter
SVN-Revision: 40900
Zoltan Herpai [Sun, 1 Jun 2014 18:47:14 +0000 (18:47 +0000)]
uboot-sunxi: add bananapi support
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 40899
Zoltan Herpai [Sun, 1 Jun 2014 18:44:10 +0000 (18:44 +0000)]
sunxi: add support for Lemaker bananaPi
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 40898
Felix Fietkau [Sun, 1 Jun 2014 15:18:47 +0000 (15:18 +0000)]
metadata.pl: suppress profile config.in code for targets that have subtargets (fixes #14480)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40896
Zoltan Herpai [Sun, 1 Jun 2014 12:18:53 +0000 (12:18 +0000)]
sunxi: fix typo in uci-defaults network config
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 40895
Steven Barth [Sun, 1 Jun 2014 10:32:37 +0000 (10:32 +0000)]
ca-certificates: bump to
20140325
SVN-Revision: 40894
Steven Barth [Sun, 1 Jun 2014 10:28:50 +0000 (10:28 +0000)]
6relayd: superseded by odhcpd
SVN-Revision: 40893
Steven Barth [Sun, 1 Jun 2014 09:49:24 +0000 (09:49 +0000)]
polarssl: bump to 1.3.7
SVN-Revision: 40892
Felix Fietkau [Sat, 31 May 2014 23:49:23 +0000 (23:49 +0000)]
netifd: replace the sleep 5 with an ubus wait_for call to speed up init script
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40891
Felix Fietkau [Sat, 31 May 2014 13:00:46 +0000 (13:00 +0000)]
eglibc: add support for other mips64 ABI variants as well
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40890
Felix Fietkau [Sat, 31 May 2014 12:46:59 +0000 (12:46 +0000)]
fstools: update to the latest version, fixes build for 64 bit targets
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40889
Felix Fietkau [Sat, 31 May 2014 12:30:39 +0000 (12:30 +0000)]
eglibc: fix mips64 abi selection, default to o64 instead of n32
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40888
Steven Barth [Fri, 30 May 2014 14:50:42 +0000 (14:50 +0000)]
odhcp6c: fix last commit
SVN-Revision: 40887
Steven Barth [Fri, 30 May 2014 14:48:39 +0000 (14:48 +0000)]
odhcp6c: improve passthrough filter
SVN-Revision: 40886
Felix Fietkau [Fri, 30 May 2014 11:58:54 +0000 (11:58 +0000)]
include/cmake.mk: define CMAKE_AR and CMAKE_RANLIB to fix build errors
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40885
Felix Fietkau [Fri, 30 May 2014 11:37:35 +0000 (11:37 +0000)]
iwinfo: null-terminate the ssid on nl80211 scan to avoid printing trailing garbage
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40884
Steven Barth [Thu, 29 May 2014 21:50:32 +0000 (21:50 +0000)]
busybox: remove redundant 6rd-patch
SVN-Revision: 40882
Steven Barth [Thu, 29 May 2014 21:01:42 +0000 (21:01 +0000)]
odhcpd: Fix a segfault in DHCPv6 option handling
SVN-Revision: 40881
Hauke Mehrtens [Thu, 29 May 2014 19:25:40 +0000 (19:25 +0000)]
bcm53xx: add support for the PCIe controller
This patch adds support for the PCIe controller
In addition to the PCIe controller a sprom is now provided by a device
tree driver to bcma from some nvram.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 40880
Steven Barth [Thu, 29 May 2014 10:35:34 +0000 (10:35 +0000)]
busybox: udhcpc source IP rebind patch
Patch sets the source IP address of DHCP request messages during rebind to the IP address
assigned to the udhcpc client. Source address 0.0.0.0 can only be used by a client prior
to obtaining its IP address (see RFC2131 § 4.1). Source IP address behavior lines up now with
the ISC dhcp client implementation for DHCP request messages during rebind and DHCP release
messages.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
SVN-Revision: 40878
Jo-Philipp Wich [Thu, 29 May 2014 09:22:52 +0000 (09:22 +0000)]
6in4: adjust update url (#16617)
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 40876
Felix Fietkau [Wed, 28 May 2014 23:18:47 +0000 (23:18 +0000)]
musl: add a hack to rip out excessive iconv bloat
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40875
Felix Fietkau [Wed, 28 May 2014 22:40:31 +0000 (22:40 +0000)]
gcc: define USE_PT_GNU_EH_FRAME for musl as well, reduces binary object size
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40874
projects / openwrt / svn-archive / archive.git / log