board_config_update
board=$(board_name)
-boardname="${board##*,}"
case "$board" in
alfa-network,ap120c-ac)
- ucidef_set_led_netdev "wan" "WAN" "${boardname}:amber:wan" "eth1"
+ ucidef_set_led_netdev "wan" "WAN" "amber:wan" "eth1"
;;
asus,rt-ac58u)
- ucidef_set_led_netdev "wan" "WAN" "${boardname}:blue:wan" "eth1"
- ucidef_set_led_switch "lan" "LAN" "${boardname}:blue:lan" "switch0" "0x1e"
+ ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
+ ucidef_set_led_switch "lan" "LAN" "blue:lan" "switch0" "0x1e"
;;
avm,fritzbox-4040)
- ucidef_set_led_wlan "wlan" "WLAN" "fritz4040:green:wlan" "phy0tpt" "phy1tpt"
- ucidef_set_led_netdev "wan" "WAN" "fritz4040:green:wan" "eth1"
- ucidef_set_led_switch "lan" "LAN" "fritz4040:green:lan" "switch0" "0x1e"
+ ucidef_set_led_wlan "wlan" "WLAN" "green:wlan" "phy0tpt" "phy1tpt"
+ ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
+ ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x1e"
;;
avm,fritzbox-7530 |\
glinet,gl-b1300)
- ucidef_set_led_wlan "wlan" "WLAN" "${boardname}:green:wlan" "phy0tpt"
+ ucidef_set_led_wlan "wlan" "WLAN" "green:wlan" "phy0tpt"
+ ;;
+edgecore,ecw5211 |\
+zyxel,nbg6617 |\
+zyxel,wre6606)
+ ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy0tpt"
+ ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy1tpt"
;;
edgecore,oap100)
- ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:blue:wlan2g" "phy0tpt"
- ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:blue:wlan5g" "phy1tpt"
+ ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wlan2g" "phy0tpt"
+ ucidef_set_led_wlan "wlan5g" "WLAN5G" "blue:wlan5g" "phy1tpt"
;;
engenius,eap1300)
- ucidef_set_led_netdev "lan" "LAN" "${boardname}:blue:lan" "eth0"
- ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:blue:wlan2g" "phy0tpt"
- ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:yellow:wlan5g" "phy1tpt"
- ucidef_set_led_default "mesh" "MESH" "${boardname}:blue:mesh" "0"
+ ucidef_set_led_netdev "lan" "LAN" "blue:lan" "eth0"
+ ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wlan2g" "phy0tpt"
+ ucidef_set_led_wlan "wlan5g" "WLAN5G" "yellow:wlan5g" "phy1tpt"
+ ucidef_set_led_default "mesh" "MESH" "blue:mesh" "0"
;;
engenius,eap2200)
- ucidef_set_led_netdev "lan1" "LAN1" "${boardname}:blue:lan1" "eth0"
- ucidef_set_led_netdev "lan2" "LAN2" "${boardname}:blue:lan2" "eth1"
+ ucidef_set_led_netdev "lan1" "LAN1" "blue:lan1" "eth0"
+ ucidef_set_led_netdev "lan2" "LAN2" "blue:lan2" "eth1"
;;
engenius,ens620ext)
- ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:green:wlan2G" "phy0tpt"
- ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:green:wlan5G" "phy1tpt"
- ucidef_set_led_netdev "lan1" "LAN1" "${boardname}:green:lan1" "eth0"
- ucidef_set_led_netdev "lan2" "LAN2" "${boardname}:green:lan2" "eth1"
+ ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy0tpt"
+ ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy1tpt"
+ ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "eth0"
+ ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "eth1"
;;
mobipromo,cm520-79f)
- ucidef_set_led_netdev "wan" "WAN" "${boardname}:blue:wan" "eth1"
- ucidef_set_led_switch "lan1" "LAN1" "${boardname}:blue:lan1" "switch0" "0x10"
- ucidef_set_led_switch "lan2" "LAN2" "${boardname}:blue:lan2" "switch0" "0x08"
+ ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
+ ucidef_set_led_switch "lan1" "LAN1" "blue:lan1" "switch0" "0x10"
+ ucidef_set_led_switch "lan2" "LAN2" "blue:lan2" "switch0" "0x08"
;;
netgear,ex6100v2 |\
netgear,ex6150v2)
- ucidef_set_led_wlan "wlan2g" "WLAN2G" "ex61x0v2:green:router" "phy0tpt"
- ucidef_set_led_wlan "wlan5g" "WLAN5G" "ex61x0v2:green:client" "phy1tpt"
+ ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:router" "phy0tpt"
+ ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:client" "phy1tpt"
;;
qxwlan,e2600ac-c1 |\
qxwlan,e2600ac-c2)
- ucidef_set_led_wlan "wlan2g" "WLAN0" "e2600ac:green:wlan0" "phy0tpt"
- ucidef_set_led_wlan "wlan5g" "WLAN1" "e2600ac:green:wlan1" "phy1tpt"
- ;;
-zyxel,nbg6617)
- ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:green:wlan2G" "phy0tpt"
- ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:green:wlan5G" "phy1tpt"
- ;;
-edgecore,ecw5211 |\
-zyxel,wre6606)
- ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:green:wlan2g" "phy0tpt"
- ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:green:wlan5g" "phy1tpt"
+ ucidef_set_led_wlan "wlan2g" "WLAN0" "green:wlan0" "phy0tpt"
+ ucidef_set_led_wlan "wlan5g" "WLAN1" "green:wlan1" "phy1tpt"
;;
esac
--- /dev/null
+. /lib/functions/migrations.sh
+
+board=$(board_name)
+
+case "$board" in
+engenius,emr3500)
+ migrate_leds "emr3500:="
+ ;;
+engenius,ens620ext|\
+zyxel,nbg6617)
+ migrate_leds ":wlan2G=:wlan2g" ":wlan5G=:wlan5g"
+ ;;
+esac
+
+remove_devicename_leds
+
+migrations_apply system
+
+exit 0
compatible = "gpio-leds";
red {
- label = "a42:red:status";
+ label = "red:status";
gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-off";
};
power: green {
- label = "a42:green:status";
+ label = "green:status";
gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
};
blue {
- label = "a42:blue:status";
+ label = "blue:status";
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-off";
};
compatible = "gpio-leds";
status: status {
- label = "ap120c-ac:blue:status";
+ label = "blue:status";
gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
wan {
- label = "ap120c-ac:amber:wan";
+ label = "amber:wan";
gpios = <&qca8075 19 GPIO_ACTIVE_HIGH>;
};
wlan2g {
- label = "ap120c-ac:green:wlan2g";
+ label = "green:wlan2g";
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
wlan5g {
- label = "ap120c-ac:red:wlan5g";
+ label = "red:wlan5g";
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy1tpt";
};
compatible = "gpio-leds";
led_status_red: status_red {
- label = "cs-w3-wd1200g-eup:red:status";
+ label = "red:status";
gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
};
led_status_green: status_green {
- label = "cs-w3-wd1200g-eup:green:status";
+ label = "green:status";
gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
};
led_status_blue: status_blue {
- label = "cs-w3-wd1200g-eup:blue:status";
+ label = "blue:status";
gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
};
};
compatible = "gpio-leds";
led_red: red {
- label = "dap-2610:red:power";
+ label = "red:power";
gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
};
led_green: green {
- label = "dap-2610:green:power";
+ label = "green:power";
gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
};
};
compatible = "gpio-leds";
power: status {
- label = "EA6350v3:green:status";
+ label = "green:status";
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
};
};
compatible = "gpio-leds";
power: orange {
- label = "eap1300:orange:power";
+ label = "orange:power";
gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
};
lan {
- label = "eap1300:blue:lan";
+ label = "blue:lan";
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
};
mesh {
- label = "eap1300:blue:mesh";
+ label = "blue:mesh";
gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
};
wlan2g {
- label = "eap1300:blue:wlan2g";
+ label = "blue:wlan2g";
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
};
wlan5g {
- label = "eap1300:yellow:wlan5g";
+ label = "yellow:wlan5g";
gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
};
};
compatible = "gpio-leds";
led_power: power {
- label = "ecw5211:yellow:power";
+ label = "yellow:power";
gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
};
wlan2g {
- label = "ecw5211:green:wlan2g";
+ label = "green:wlan2g";
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
};
wlan5g {
- label = "ecw5211:green:wlan5g";
+ label = "green:wlan5g";
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
};
};
compatible = "gpio-leds";
led_power: power {
- label = "emd1:white:power";
+ label = "white:power";
gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
};
wlan2g {
- label = "emd1:red:wlan2g";
+ label = "red:wlan2g";
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
wlan5g {
- label = "emd1:blue:wlan5g";
+ label = "blue:wlan5g";
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy1tpt";
};
mesh {
- label = "emd1:orange:mesh";
+ label = "orange:mesh";
gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
};
};
compatible = "gpio-leds";
power: white {
- label = "emr3500:white:power";
+ label = "white:power";
gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
};
blue {
- label = "emr3500:blue";
+ label = "blue";
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
};
red {
- label = "emr3500:red";
+ label = "red";
gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
};
orange {
- label = "emr3500:orange";
+ label = "orange";
gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
};
};
compatible = "gpio-leds";
power: power {
- label = "ens620ext:amber:power";
+ label = "amber:power";
gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
};
lan1 {
- label = "ens620ext:green:lan1";
+ label = "green:lan1";
gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
};
lan2 {
- label = "ens620ext:green:lan2";
+ label = "green:lan2";
gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
};
- wlan2G {
- label = "ens620ext:green:wlan2G";
+ wlan2g {
+ label = "green:wlan2g";
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
};
- wlan5G {
- label = "ens620ext:green:wlan5G";
+ wlan5g {
+ label = "green:wlan5g";
gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
};
};
compatible = "gpio-leds";
power_amber: power_amber {
- label = "ex61x0v2:amber:power";
+ label = "amber:power";
gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
};
power_green: power_green {
- label = "ex61x0v2:green:power";
+ label = "green:power";
gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
};
right {
- label = "ex61x0v2:blue:right";
+ label = "blue:right";
gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
};
left {
- label = "ex61x0v2:blue:left";
+ label = "blue:left";
gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
};
client_green {
- label = "ex61x0v2:green:client";
+ label = "green:client";
gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
};
client_red {
- label = "ex61x0v2:red:client";
+ label = "red:client";
gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
};
router_green {
- label = "ex61x0v2:green:router";
+ label = "green:router";
gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
};
router_red {
- label = "ex61x0v2:red:router";
+ label = "red:router";
gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
};
wps {
- label = "ex61x0v2:green:wps";
+ label = "green:wps";
gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
};
};
compatible = "gpio-leds";
wlan {
- label = "fritz4040:green:wlan";
+ label = "green:wlan";
gpios = <&qca8075 1 GPIO_ACTIVE_HIGH>;
};
panic: info_red {
- label = "fritz4040:red:info";
+ label = "red:info";
gpios = <&qca8075 3 GPIO_ACTIVE_HIGH>;
panic-indicator;
};
wan {
- label = "fritz4040:green:wan";
+ label = "green:wan";
gpios = <&qca8075 5 GPIO_ACTIVE_HIGH>;
};
power: power {
- label = "fritz4040:green:power";
+ label = "green:power";
gpios = <&qca8075 11 GPIO_ACTIVE_HIGH>;
};
lan {
- label = "fritz4040:green:lan";
+ label = "green:lan";
gpios = <&qca8075 13 GPIO_ACTIVE_HIGH>;
};
flash: info_amber {
- label = "fritz4040:amber:info";
+ label = "amber:info";
gpios = <&qca8075 15 GPIO_ACTIVE_HIGH>;
};
};
compatible = "gpio-leds";
led_status: status {
- label = "meshpoint-one:blue:status";
+ label = "blue:status";
gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>;
};
};
pinctrl-names = "default";
power: power {
- label = "nbg6617:green:power";
+ label = "green:power";
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
};
usb {
- label = "nbg6617:green:usb";
+ label = "green:usb";
gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
trigger-sources = <&usb2_port1>, <&usb3_port1>, <&usb3_port2>;
linux,default-trigger = "usbport";
};
- wlan2G {
- label = "nbg6617:green:wlan2G";
+ wlan2g {
+ label = "green:wlan2g";
gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
};
- wlan5G {
- label = "nbg6617:green:wlan5G";
+ wlan5g {
+ label = "green:wlan5g";
gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
};
wps {
- label = "nbg6617:green:wps";
+ label = "green:wps";
gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
};
};
compatible = "gpio-leds";
led_power: status {
- label = "rt-ac58u:blue:status";
+ label = "blue:status";
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
};
wan {
- label = "rt-ac58u:blue:wan";
+ label = "blue:wan";
gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
};
wlan2G {
- label = "rt-ac58u:blue:wlan2G";
+ label = "blue:wlan2G";
gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
wlan5G {
- label = "rt-ac58u:blue:wlan5G";
+ label = "blue:wlan5G";
gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy1tpt";
};
usb {
- label = "rt-ac58u:blue:usb";
+ label = "blue:usb";
gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
trigger-sources = <&usb3_port1>, <&usb3_port2>;
linux,default-trigger = "usbport";
};
lan {
- label = "rt-ac58u:blue:lan";
+ label = "blue:lan";
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
};
};
compatible = "gpio-leds";
wps {
- label = "wre6606:green:wps";
+ label = "green:wps";
gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
};
wlan5g_green {
- label = "wre6606:green:wlan5g";
+ label = "green:wlan5g";
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
};
power: power {
- label = "wre6606:green:power";
+ label = "green:power";
gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
};
wlan5g_red {
- label = "wre6606:red:wlan5g";
+ label = "red:wlan5g";
gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
};
wlan2g_red {
- label = "wre6606:red:wlan2g";
+ label = "red:wlan2g";
gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
};
wlan2g_green {
- label = "wre6606:green:wlan2g";
+ label = "green:wlan2g";
gpios = <&tlmm 59 GPIO_ACTIVE_HIGH>;
};
};
compatible = "gpio-leds";
red {
- label = "a62:red:status";
+ label = "red:status";
gpios = <&tlmm 43 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-off";
};
power: green {
- label = "a62:green:status";
+ label = "green:status";
gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
};
blue {
- label = "a62:blue:status";
+ label = "blue:status";
gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-off";
};
compatible = "gpio-leds";
usb {
- label = "cm520-79f:blue:usb";
+ label = "blue:usb";
gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "usbport";
trigger-sources = <&usb3_port1>, <&usb3_port2>, <&usb2_port1>;
};
led_sys: can {
- label = "cm520-79f:blue:can";
+ label = "blue:can";
gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
};
wan {
- label = "cm520-79f:blue:wan";
+ label = "blue:wan";
gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
};
lan1 {
- label = "cm520-79f:blue:lan1";
+ label = "blue:lan1";
gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
};
lan2 {
- label = "cm520-79f:blue:lan2";
+ label = "blue:lan2";
gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
};
wlan2g {
- label = "cm520-79f:blue:wlan2g";
+ label = "blue:wlan2g";
gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wlan5g {
- label = "cm520-79f:blue:wlan5g";
+ label = "blue:wlan5g";
gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
compatible = "gpio-leds";
led1 {
- label = "e2600ac:green:wlan0";
+ label = "green:wlan0";
gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
};
led2 {
- label = "e2600ac:green:wlan1";
+ label = "green:wlan1";
gpios = <&tlmm 36 GPIO_ACTIVE_LOW>;
};
led3 {
- label = "e2600ac:green:usb";
+ label = "green:usb";
gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
trigger-sources = <&usb2_port1>, <&usb3_port1>, <&usb3_port2>;
linux,default-trigger = "usbport";
};
led4 {
- label = "e2600ac:green:ctrl1";
+ label = "green:ctrl1";
gpios = <&tlmm 51 GPIO_ACTIVE_LOW>;
};
led5 {
- label = "e2600ac:green:ctrl2";
+ label = "green:ctrl2";
gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
};
led6 {
- label = "e2600ac:green:ctrl3";
+ label = "green:ctrl3";
gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
};
};
// Front panel LEDs, top to bottom
led_plug: diag {
- label = "ea8300:amber:plug";
+ label = "amber:plug";
gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
};
led_world: internet {
- label = "ea8300:amber:world";
+ label = "amber:world";
gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
};
led_wps: wps {
- label = "ea8300:white:wps";
+ label = "white:wps";
gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
};
led_wps_amber: wps_amber {
- label = "ea8300:amber:wps";
+ label = "amber:wps";
gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
panic-indicator;
};
led_linksys: pwr {
- label = "ea8300:white:linksys";
+ label = "white:linksys";
gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
};
// On back panel, above USB socket
led_usb: usb {
- label = "ea8300:green:usb";
+ label = "green:usb";
gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
trigger-sources = <&usb3_port1>, <&usb3_port2>,
<&usb2_port1>;
compatible = "gpio-leds";
led_power: power {
- label = "eap2200:amber:power";
+ label = "amber:power";
gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
};
lan1 {
- label = "eap2200:blue:lan1";
+ label = "blue:lan1";
gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
};
lan2 {
- label = "eap2200:blue:lan2";
+ label = "blue:lan2";
gpios = <&tlmm 45 GPIO_ACTIVE_LOW>;
};
wlan2g {
- label = "eap2200:blue:wlan2g";
+ label = "blue:wlan2g";
gpios = <&tlmm 46 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wlan5g {
- label = "eap2200:yellow:wlan5g";
+ label = "yellow:wlan5g";
gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
wlan5g2 {
- label = "eap2200:yellow:wlan5g2";
+ label = "yellow:wlan5g2";
gpios = <&tlmm 48 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy2tpt";
};
mode {
- label = "eap2200:blue:mode";
+ label = "blue:mode";
gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
};
};
compatible = "gpio-leds";
info_red: info_red {
- label = "fritzbox-7530:red:info";
+ label = "red:info";
gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
};
info_green: info {
- label = "fritzbox-7530:green:info";
+ label = "green:info";
gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
};
wlan {
- label = "fritzbox-7530:green:wlan";
+ label = "green:wlan";
gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
};
fon {
- label = "fritzbox-7530:green:fon";
+ label = "green:fon";
gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
};
power_green: power {
- label = "fritzbox-7530:green:power";
+ label = "green:power";
gpios = <&tlmm 39 GPIO_ACTIVE_LOW>;
};
wps {
- label = "fritzbox-7530:green:wps";
+ label = "green:wps";
gpios = <&tlmm 45 GPIO_ACTIVE_LOW>;
};
};
compatible = "gpio-leds";
power_red: power_red {
- label = "fritzwlan-1200:red:power";
+ label = "red:power";
gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
};
power_green: power_green {
- label = "fritzwlan-1200:green:power";
+ label = "green:power";
gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
};
power_yellow {
- label = "fritzwlan-1200:yellow:power";
+ label = "yellow:power";
gpios = <&tlmm 49 GPIO_ACTIVE_LOW>;
};
};
compatible = "gpio-leds";
connect_red {
- label = "fritzwlan-3000:red:connect";
+ label = "red:connect";
gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
};
connect_green {
- label = "fritzwlan-3000:green:connect";
+ label = "green:connect";
gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
};
connect_blue {
- label = "fritzwlan-3000:blue:connect";
+ label = "blue:connect";
gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
};
power_led: power {
- label = "fritzwlan-3000:green:power";
+ label = "green:power";
gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
};
};
compatible = "gpio-leds";
led_status: status {
- label = "habanero-dvk:green:status";
+ label = "green:status";
gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
panic-indicator;
};
led_upgrade: upgrade {
- label = "habanero-dvk:green:upgrade";
+ label = "green:upgrade";
gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>;
};
wlan2g {
- label = "habanero-dvk:green:wlan2g";
+ label = "green:wlan2g";
gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
wlan5g {
- label = "habanero-dvk:green:wlan5g";
+ label = "green:wlan5g";
gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy1tpt";
};
led_blue0: blue0 {
chan-name = "blue0";
- label = "map-ac2200:blue:chan0";
+ label = "blue:chan0";
led-cur = [fa];
max-cur = [ff];
};
blue1 {
chan-name = "blue1";
- label = "map-ac2200:blue:chan1";
+ label = "blue:chan1";
led-cur = [fa];
max-cur = [ff];
};
blue2 {
chan-name = "blue2";
- label = "map-ac2200:blue:chan2";
+ label = "blue:chan2";
led-cur = [fa];
max-cur = [ff];
};
led_green0: green0 {
chan-name = "green0";
- label = "map-ac2200:green:chan0";
+ label = "green:chan0";
led-cur = [fa];
max-cur = [ff];
};
green1 {
chan-name = "green1";
- label = "map-ac2200:green:chan1";
+ label = "green:chan1";
led-cur = [fa];
max-cur = [ff];
};
green2 {
chan-name = "green2";
- label = "map-ac2200:green:chan2";
+ label = "green:chan2";
led-cur = [fa];
max-cur = [ff];
};
led_red0: red0 {
chan-name = "red0";
- label = "map-ac2200:red:chan0";
+ label = "red:chan0";
led-cur = [fa];
max-cur = [ff];
};
red1 {
chan-name = "red1";
- label = "map-ac2200:red:chan1";
+ label = "red:chan1";
led-cur = [fa];
max-cur = [ff];
};
red2 {
chan-name = "red2";
- label = "map-ac2200:red:chan2";
+ label = "red:chan2";
led-cur = [fa];
max-cur = [ff];
};
compatible = "gpio-leds";
led_red: red {
- label = "mr8300:red:alarm";
+ label = "red:alarm";
gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
};
led_amber: amber {
- label = "mr8300:amber:programming";
+ label = "amber:programming";
gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
panic-indicator;
};
led_blue: blue {
- label = "mr8300:blue:power";
+ label = "blue:power";
gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
};
// On back panel, above USB socket
led_usb: usb {
- label = "mr8300:green:usb";
+ label = "green:usb";
gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
trigger-sources = <&usb3_port1>, <&usb3_port2>,
<&usb2_port1>;
compatible = "gpio-leds";
led_system: led_system {
- label = "oap100:green:system";
+ label = "green:system";
gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
};
led_2g {
- label = "oap100:blue:wlan2g";
+ label = "blue:wlan2g";
gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>;
};
led_5g {
- label = "oap100:blue:wlan5g";
+ label = "blue:wlan5g";
gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
};
};
led_power_blue: power_blue {
gpios = <&led_gpio 0 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:blue:power";
+ label = "blue:power";
default-state = "on";
};
led_power_red: power_red {
gpios = <&led_gpio 1 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:red:power";
+ label = "red:power";
};
tp28 {
gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
- label = "rtl30vw:ext:tp28";
+ label = "ext:tp28";
default-state = "keep";
};
tp27 {
gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
- label = "rtl30vw:ext:tp27";
+ label = "ext:tp27";
default-state = "keep";
};
wlan2g {
gpios = <&led_gpio 8 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:blue:wlan2g";
+ label = "blue:wlan2g";
linux,default-trigger = "phy0tpt";
};
wlan5g {
gpios = <&led_gpio 9 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:blue:wlan5g";
+ label = "blue:wlan5g";
linux,default-trigger = "phy1tpt";
};
wps {
gpios = <&led_gpio 10 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:blue:wps";
+ label = "blue:wps";
};
voip {
gpios = <&led_gpio 11 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:blue:voip";
+ label = "blue:voip";
};
s1 {
gpios = <&led_gpio 12 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:blue:s1";
+ label = "blue:s1";
};
s2 {
gpios = <&led_gpio 13 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:blue:s2";
+ label = "blue:s2";
};
s3 {
gpios = <&led_gpio 14 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:blue:s3";
+ label = "blue:s3";
};
s4 {
gpios = <&led_gpio 15 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:blue:s4";
+ label = "blue:s4";
};
signal {
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:red:signal";
+ label = "red:signal";
};
};
pinctrl-names = "default";
led_status: led2 {
- label = "u4019:green:led2";
+ label = "green:led2";
gpios = <&tlmm 68 GPIO_ACTIVE_LOW>;
};
};
compatible = "gpio-leds";
led_power_white: power_white {
- label = "wtr-m2133hp:white:power";
+ label = "white:power";
gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>;
};
led_power_orange: power_orange {
- label = "wtr-m2133hp:orange:power";
+ label = "orange:power";
gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>;
};
led_power_blue: power_blue {
- label = "wtr-m2133hp:blue:power";
+ label = "blue:power";
gpios = <&tlmm 43 GPIO_ACTIVE_HIGH>;
};
router_white {
- label = "wtr-m2133hp:white:router";
+ label = "white:router";
gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
};
router_orange {
- label = "wtr-m2133hp:orange:router";
+ label = "orange:router";
gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
};
internet_white {
- label = "wtr-m2133hp:white:internet";
+ label = "white:internet";
gpios = <&tlmm 27 GPIO_ACTIVE_HIGH>;
};
internet_orange {
- label = "wtr-m2133hp:orange:internet";
+ label = "orange:internet";
gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
};
wireless_white {
- label = "wtr-m2133hp:white:wireless";
+ label = "white:wireless";
gpios = <&tlmm 24 GPIO_ACTIVE_HIGH>;
};
wireless_orange {
- label = "wtr-m2133hp:orange:wireless";
+ label = "orange:wireless";
gpios = <&tlmm 44 GPIO_ACTIVE_HIGH>;
};
};
compatible = "gpio-leds";
status: rss4 {
- label = "wpj428:green:rss4";
+ label = "green:rss4";
gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
};
rss3 {
- label = "wpj428:green:rss3";
+ label = "green:rss3";
gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
};
};
compatible = "gpio-leds";
wifi_green {
- label = "ap-303:green:wifi";
+ label = "green:wifi";
gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
wifi_amber {
- label = "ap-303:amber:wifi";
+ label = "amber:wifi";
gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy1tpt";
};
led_system_red: system_red {
- label = "ap-303:red:system";
+ label = "red:system";
gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
};
led_system_green: system_green {
- label = "ap-303:green:system";
+ label = "green:system";
gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
};
};
compatible = "gpio-leds";
wifi_green {
- label = "ap-303h:green:wifi";
+ label = "green:wifi";
gpios = <&tlmm 27 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
wifi_amber {
- label = "ap-303h:amber:wifi";
+ label = "amber:wifi";
gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy1tpt";
};
pse {
- label = "ap-303h:green:pse";
+ label = "green:pse";
gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
};
led_system_red: system_red {
- label = "ap-303h:red:system";
+ label = "red:system";
gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>;
};
led_system_green: system_green {
- label = "ap-303h:green:system";
+ label = "green:system";
gpios = <&tlmm 24 GPIO_ACTIVE_HIGH>;
};
led_system_amber: system_amber {
- label = "ap-303h:amber:system";
+ label = "amber:system";
gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
};
};
compatible = "gpio-leds";
led_system_red: system_red {
- label = "ap-365:red:system";
+ label = "red:system";
gpios = <&tlmm 46 GPIO_ACTIVE_LOW>;
};
led_system_green: system_green {
- label = "ap-365:green:system";
+ label = "green:system";
gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
};
system_amber {
- label = "ap-365:amber:system";
+ label = "amber:system";
gpios = <&tlmm 49 GPIO_ACTIVE_LOW>;
};
};
compatible = "gpio-leds";
power: power {
- label = "gl-b1300:green:power";
+ label = "green:power";
gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
mesh {
- label = "gl-b1300:green:mesh";
+ label = "green:mesh";
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
};
wlan {
- label = "gl-b1300:green:wlan";
+ label = "green:wlan";
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
};
};
compatible = "gpio-leds";
led_power: power {
- label = "gl-s1300:green:power";
+ label = "green:power";
gpios = <&tlmm 57 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
mesh {
- label = "gl-s1300:green:mesh";
+ label = "green:mesh";
gpios = <&tlmm 59 GPIO_ACTIVE_HIGH>;
};
wlan {
- label = "gl-s1300:green:wlan";
+ label = "green:wlan";
gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
compatible = "gpio-leds";
power_orange: power {
- label = "mr33:orange:power";
+ label = "orange:power";
gpios = <&tlmm 49 GPIO_ACTIVE_LOW>;
panic-indicator;
};
/* RGB led */
status_red: chan0 {
- chan-name = "mr33:red:status";
+ chan-name = "red:status";
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
};
status_green: chan1 {
- chan-name = "mr33:green:status";
+ chan-name = "green:status";
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
};
chan2 {
- chan-name = "mr33:blue:status";
+ chan-name = "blue:status";
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
};
chan3 {
- chan-name = "mr33:white:status";
+ chan-name = "white:status";
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
};
projects / openwrt / openwrt.git / commitdiff