#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "Sitecom WLR-7100 (X7 AC1200)";
};
led_power: power {
- label = "amber:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
default-state = "on";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
chosen {
};
led_status_green: status_green {
- label = "green:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
};
led_status_yellow: status_yellow {
- label = "yellow:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_YELLOW>;
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "aruba,ap-105", "qca,ar7161";
compatible = "gpio-leds";
led_power_green: power_green {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
led_power_red: power_red {
- label = "red:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
panic-indicator;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "aruba,ap-175", "qca,ar7161";
/* These external LEDs are visible from the bottom panel */
led_power_amber: power_amber {
- label = "amber:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio_ext 5 GPIO_ACTIVE_HIGH>;
panic-indicator;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
aliases {
};
usb {
- label = "green:usb";
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&ath9k0 3 GPIO_ACTIVE_LOW>;
trigger-sources = <&usb_ohci_port>, <&usb_ehci_port>;
linux,default-trigger = "usbport";
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "dlink,dir-825-b1", "qca,ar7161";
compatible = "gpio-leds";
usb {
- label = "blue:usb";
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
trigger-sources = <&usb_ohci_port>, <&usb_ehci_port>;
linux,default-trigger = "usbport";
};
led_power_orange: power_orange {
- label = "orange:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_ORANGE>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
default-state = "on";
};
led_power_blue: power_blue {
- label = "blue:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
wps {
- label = "blue:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "fortinet,fap-220-b", "qca,ar7161";
compatible = "gpio-leds";
led_power: power-green {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
status-green {
- label = "green:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
status-yellow {
- label = "yellow:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_YELLOW>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
panic-indicator;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "meraki,mr16", "qca,ar7161";
};
wan {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
led_power_orange: power_orange {
- label = "orange:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_ORANGE>;
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
panic-indicator;
};
led_power_green: power_green {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "netgear,wndap360", "qca,ar7161";
compatible = "gpio-leds";
led_power_orange: power_orange {
- label = "orange:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_ORANGE>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/mtd/partitions/uimage.h>
/ {
compatible = "reset-leds";
usb_led {
- label = "green:usb";
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_GREEN>;
resets = <&rst 12>;
trigger-sources = <&usb_ohci_port>, <&usb_ehci_port>;
linux,default-trigger = "usbport";
compatible = "gpio-leds";
wps {
- label = "orange:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_ORANGE>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
led_power_green: power_green {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
led_power_orange: power_orange {
- label = "orange:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_ORANGE>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wps_green {
- label = "green:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
wan_green {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "ruckus,gd11", "qca,ar7161";
};
led_power_green: power-green {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
led_power_red: power-red {
- label = "red:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
panic-indicator;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "siemens,ws-ap3610", "qca,ar7161";
compatible = "gpio-leds";
led_power_green: led_power_green {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
};
led_power_red: led_power_red {
- label = "red:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "trendnet,tew-673gru", "qca,ar7161";
compatible = "gpio-leds";
led_wps: wps {
- label = "blue:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "buffalo,whr-g301n", "qca,ar7240";
};
wan {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
};
compatible = "gpio-leds";
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "D-Link DIR-615 E4";
pinctrl-0 = <&switch_led_pins>;
led_power_green: power_green {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
};
led_power_amber: power_amber {
- label = "amber:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
};
wps {
- label = "blue:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
};
wan_amber {
- label = "amber:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
};
wan_green {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
};
compatible = "gpio-leds";
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "engenius,enh202-v1", "qca,ar7240";
};
lan {
- label = "amber:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
wan {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
};
compatible = "gpio-leds";
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/mtd/partitions/uimage.h>
/ {
pinctrl-0 = <&jtag_disable_pins &switch_led_disable_pins &clks_disable_pins>;
led_power_green: power_green {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
led_power_amber: power_amber {
- label = "amber:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
wan_green {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
wan_amber {
- label = "amber:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
compatible = "gpio-leds";
wps_green {
- label = "green:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&ath9k 5 GPIO_ACTIVE_LOW>;
};
wlan_blue {
- label = "blue:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/mtd/partitions/uimage.h>
/ {
pinctrl-0 = <&jtag_disable_pins &switch_led_disable_pins &clks_disable_pins>;
led_power: power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
};
wan {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
};
compatible = "gpio-leds";
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "openmesh,om2p-v1", "qca,ar7240";
pinctrl-0 = <&switch_led_disable_pins>;
led_power_blue: power_blue {
- label = "blue:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
default-state = "on";
};
};
lan_blue {
- label = "blue:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
wan_blue {
- label = "blue:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
};
led_power_red: power-red {
- label = "red:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
panic-indicator;
};
led_power_green: power-green {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan-green {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0assoc";
};
wlan-yellow {
- label = "yellow:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_YELLOW>;
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
aliases {
compatible = "gpio-leds";
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "ar7240_tplink.dtsi"
&leds {
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "ar7240_tplink.dtsi"
&leds {
};
wan {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/mtd/partitions/uimage.h>
/ {
pinctrl-0 = <&jtag_disable_pins &switch_led_disable_pins &clks_disable_pins>;
wan_green {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
wan_amber {
- label = "amber:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
};
wps_green {
- label = "green:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
};
};
compatible = "gpio-leds";
led_power_green: power_green {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&ath9k 3 GPIO_ACTIVE_LOW>;
};
led_power_amber: power_amber {
- label = "amber:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&ath9k 2 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
wlan_blue {
- label = "blue:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/mtd/partitions/uimage.h>
/ {
pinctrl-0 = <&jtag_disable_pins &switch_led_disable_pins &clks_disable_pins>;
wan_green {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
wan_amber {
- label = "amber:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
};
wps_green {
- label = "green:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
};
usb_green {
- label = "green:usb";
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port>;
linux,default-trigger = "usbport";
compatible = "gpio-leds";
led_power_green: power_green {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&ath9k 2 GPIO_ACTIVE_LOW>;
};
led_power_amber: power_amber {
- label = "amber:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
wlan_blue {
- label = "blue:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "ar7241_tplink_tl-mr3x20.dtsi"
/ {
compatible = "gpio-leds";
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "ar7241_tplink_tl-mr3x20.dtsi"
/ {
compatible = "gpio-leds";
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "ar7241_tplink.dtsi"
/ {
compatible = "gpio-leds";
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "tplink,tl-wr842n-v1", "qca,ar7241";
compatible = "gpio-leds";
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "ar7241.dtsi"
#include "ar724x_ubnt_xm.dtsi"
};
power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "avm,fritz300e", "qca,ar7242";
compatible = "gpio-leds";
led_power: power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
default-state = "on";
};
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
aliases {
};
usb {
- label = "green:usb";
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port>;
linux,default-trigger = "usbport";
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "buffalo,wzr-hp-g302h-a1a0", "qca,ar7242";
compatible = "gpio-leds";
usb {
- label = "blue:usb";
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&ath9k 4 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port>;
linux,default-trigger = "usbport";
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "engenius,eap350-v1", "qca,ar7242";
compatible = "gpio-leds";
led_power: power {
- label = "blue:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
compatible = "gpio-leds";
wlan {
- label = "blue:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "engenius,ecb350-v1", "qca,ar7242";
compatible = "gpio-leds";
led_power: power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
compatible = "gpio-leds";
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "meraki,mr12", "qca,ar7242";
};
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
led_power_orange: power_orange {
- label = "orange:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_ORANGE>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
panic-indicator;
};
led_power_green: power_green {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "tplink,tl-wr2543-v1", "qca,ar7242";
compatible = "gpio-leds";
led_wps: wps {
- label = "green:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
usb {
- label = "green:usb";
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port>;
linux,default-trigger = "usbport";
#include "ar9132.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
aliases {
compatible = "gpio-leds";
usb {
- label = "blue:usb";
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port>;
linux,default-trigger = "usbport";
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "tplink,tl-wa901nd-v2", "qca,ar9132";
};
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "tplink,tl-wr1043nd-v1", "qca,ar9132";
compatible = "gpio-leds";
usb {
- label = "green:usb";
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port>;
linux,default-trigger = "usbport";
};
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "tplink,tl-wr941-v2", "qca,ar9132";
};
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "D-Link DIR-505";
pinctrl-0 = <&jtag_disable_pins>;
led_power_green: power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
};
led_status_red: status {
- label = "red:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "GL.iNet GL-AR150";
compatible = "gpio-leds";
wlan {
- label = "orange:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_ORANGE>;
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
};
led_power: power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
chosen {
};
led_power_blue: power_blue {
- label = "blue:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
default-state = "on";
};
lan_blue {
- label = "blue:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
};
wan_blue {
- label = "blue:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "PQI Air-Pen";
compatible = "gpio-leds";
led_wlan: wlan {
- label = "blue:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
wps {
- label = "blue:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "ZiKing CPE46B";
compatible = "gpio-leds";
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "8devices Carambola2";
compatible = "gpio-leds";
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
aliases {
compatible = "gpio-leds";
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
};
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "Arduino Yun";
compatible = "gpio-leds";
wlan {
- label = "blue:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
usb {
- label = "white:usb";
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
trigger-sources = <&hub_port>;
linux,default-trigger = "usbport";
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "Embedded Wireless Dorin";
compatible = "gpio-leds";
led_status: status {
- label = "green:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "eTactica EG200";
};
wlan {
- label = "red:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
keys {
compatible = "gpio-leds";
wlan {
- label = "red:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "glinet,gl-mifi", "qca,ar9331";
compatible = "gpio-leds";
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
};
wan {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "glinet,gl-usb150", "qca,ar9331";
compatible = "gpio-leds";
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
led_power: power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "HiWiFi HC6361";
default-state = "on";
};
wlan {
- label = "blue:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
wan {
- label = "blue:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "Teltonika RUT230 v1";
};
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
/* GPIO 13 - ACTIVE HIGH for hwrev 0 */
};
wan {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
/* GPIO 14 - ACTIVE HIGH for hwrev 0 */
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "TP-Link TL-MR3020 V1";
compatible = "gpio-leds";
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
led_wps: wps {
- label = "green:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "TP-Link TL-MR3040 V2";
pinctrl-0 = <&switch_led_disable_pins>;
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
led_lan: lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "tplink,tl-wr741n-v4", "qca,ar9331";
};
wan {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
};
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "Engenius EAP300 v2";
compatible = "gpio-leds";
led_power: power {
- label = "blue:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan {
- label = "blue:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "Engenius ENS202EXT v1";
compatible = "gpio-leds";
led_power: power {
- label = "amber:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan {
- label = "amber:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
chosen {
compatible = "gpio-leds";
led_power_blue: power_blue {
- label = "blue:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
default-state = "on";
};
};
lan_blue {
- label = "blue:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
wan_blue {
- label = "blue:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "PowerCloud Systems CR3000";
compatible = "gpio-leds";
led_power: power {
- label = "amber:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan2g {
- label = "blue:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wan {
- label = "blue:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
aliases {
compatible = "gpio-leds";
led_power: power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
wan {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "ar9341_tplink.dtsi"
/ {
&leds {
usb {
- label = "green:usb";
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port>;
linux,default-trigger = "usbport";
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "ar9341_tplink_tl-wa.dtsi"
/ {
compatible = "gpio-leds";
lan {
- label = "blue:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
wlan {
- label = "blue:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "ar9341_tplink_tl-wa.dtsi"
/ {
compatible = "gpio-leds";
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
led_power_green: power_green {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
led_power_orange: power_orange {
- label = "orange:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_ORANGE>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
wlan_green {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wlan_orange {
- label = "orange:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_ORANGE>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "ar9341_tplink_tl-wa.dtsi"
/ {
compatible = "gpio-leds";
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
};
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "ar9341_tplink.dtsi"
/ {
&leds {
usb {
- label = "green:usb";
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port>;
linux,default-trigger = "usbport";
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "iodata,etg3-r", "qca,ar9344";
compatible = "gpio-leds";
led_power: power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
default-state = "on";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
aliases {
compatible = "gpio-leds";
led_power: power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio_latch 1 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "ar934x_ruckus_zf73xx.dtsi"
/ {
};
power_red: power-red {
- label = "red:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
panic-indicator;
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "ar9342_zyxel_nwa11xx.dtsi"
/ {
compatible = "gpio-leds";
led_status_green: status_green {
- label = "green:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
led_status_red: status_red {
- label = "red:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
led_wlan_green: wlan_green {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
led_lan_green: lan_green {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
led_lan_amber: lan_amber {
- label = "amber:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "ar9342_zyxel_nwa11xx.dtsi"
/ {
compatible = "gpio-leds";
led_status_green: status_green {
- label = "green:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
default-state = "on";
};
led_status_amber: status_amber {
- label = "amber:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "ar9342_zyxel_nwa11xx.dtsi"
/ {
compatible = "gpio-leds";
led_status_green: status_green {
- label = "green:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
default-state = "on";
};
led_status_amber: status_amber {
- label = "amber:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "ar9342_zyxel_nwa11xx.dtsi"
/ {
compatible = "gpio-leds";
led_status_green: status_green {
- label = "green:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
default-state = "on";
};
led_status_amber: status_amber {
- label = "amber:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "aerohive,hiveap-121", "qca,ar9344";
compatible = "gpio-leds";
led_power_orange: power_orange {
- label = "orange:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_ORANGE>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
led_power_white: power_white {
- label = "white:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "ALFA Network N5Q";
};
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "araknis,an-300-ap-i-n", "qca,ar9344";
compatible = "gpio-leds";
led_power: power {
- label = "amber:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
wps {
- label = "blue:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/mtd/partitions/uimage.h>
/ {
};
usb {
- label = "green:usb";
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port>;
linux,default-trigger = "usbport";
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "comfast,cf-e120a-v3", "qca,ar9344";
pinctrl-0 = <&led_rssimediumhigh_pin>;
wan {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "compex,wpj344-16m", "qca,ar9344";
compatible = "gpio-leds";
led_status: status {
- label = "green:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
aliases {
compatible = "gpio-leds";
wlan {
- label = "white:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "ar9344_dlink_dir-8x5.dtsi"
/ {
pinctrl-0 = <&enable_gpio_11>;
led_power_blue: power_blue {
- label = "blue:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
};
usb {
- label = "blue:usb";
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
linux,default-trigger = "usbport";
trigger-sources = <&hub_port>;
};
wan_blue {
- label = "blue:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
};
};
wps {
- label = "blue:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
led_power_orange: power_orange {
- label = "orange:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_ORANGE>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
wan_orange {
- label = "orange:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_ORANGE>;
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "ar9344_dlink_dir-8x5.dtsi"
/ {
compatible = "gpio-leds";
led_power_green: power_green {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
};
wan_green {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
};
wps {
- label = "green:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
led_power_orange: power_orange {
- label = "orange:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_ORANGE>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
wan_orange {
- label = "orange:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_ORANGE>;
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "ar9344_senao_ap-dual.dtsi"
/ {
compatible = "gpio-leds";
led_power: power {
- label = "amber:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wps {
- label = "blue:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "ar9344_senao_ap-dual.dtsi"
/ {
compatible = "gpio-leds";
led_power: power {
- label = "amber:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "enterasys,ws-ap3705i", "qca,ar9344";
pinctrl-0 = <&enable_gpio_11 &enable_gpio_16>;
led_power_green: power_green {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
led_power_red: power_red {
- label = "red:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
lan_blue {
- label = "blue:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
};
lan_green {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "ar9344_fortinet_ap-dual.dtsi"
/ {
compatible = "gpio-leds";
led_power: power_green {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
default-state = "on";
};
power_amber {
- label = "amber:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "ar9344_mikrotik_routerboard.dtsi"
#include "ar9344_mikrotik_routerboard-16m-nor.dtsi"
pinctrl-0 = <&enable_gpio_20>;
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "ar9344_mikrotik_routerboard.dtsi"
#include "ar9344_mikrotik_routerboard-16m-nor.dtsi"
&leds {
power {
- label = "blue:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
};
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "ar9344_mikrotik_routerboard.dtsi"
/ {
&leds {
power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "Netgear R6100";
compatible = "gpio-leds";
led_power_amber: power_amber {
- label = "amber:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
led_power_green: power_green {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
usb {
- label = "blue:usb";
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port>;
linux,default-trigger = "usbport";
};
wan_amber {
- label = "amber:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
wan_green {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
wlan {
- label = "blue:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/mtd/partitions/uimage.h>
/ {
pinctrl-0 = <&enable_gpio_11>;
led_power_green: power_green {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
led_power_amber: power_amber {
- label = "amber:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
};
wps_green {
- label = "green:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
wps_amber {
- label = "amber:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
&leds {
usb_green {
- label = "green:usb";
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port>;
linux,default-trigger = "usbport";
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
&leds {
wan_green {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
wan_amber {
- label = "amber:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "OCEDO Raccoon";
compatible = "gpio-leds";
power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "ar9344_openmesh_mr600.dtsi"
/ {
};
wps_blue {
- label = "blue:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
led_power_orange: power_orange {
- label = "orange:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_ORANGE>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "ar9344_openmesh_mr600.dtsi"
/ {
};
wps_blue {
- label = "blue:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
led_power_blue: power_blue {
- label = "blue:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "openmesh,om5p-an", "qca,ar9344";
pinctrl-0 = <&led_lan_wan_blue_pin>;
led_power_blue: power_blue {
- label = "blue:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wan_blue {
- label = "blue:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
lan_blue {
- label = "blue:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "openmesh,om5p", "qca,ar9344";
pinctrl-0 = <&led_lan_wan_blue_pin>;
led_power_blue: power_blue {
- label = "blue:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wan_blue {
- label = "blue:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
lan_blue {
- label = "blue:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "PowerCloud Systems CAP324";
compatible = "gpio-leds";
led_power_amber: power_amber {
- label = "amber:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
led_power_green: power_green {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan_amber {
- label = "amber:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
wlan_green {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
lan_amber {
- label = "amber:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
lan_green {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "PowerCloud Systems CR5000";
compatible = "gpio-leds";
led_power: power {
- label = "amber:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>,
<&gpio 4 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan2g {
- label = "blue:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wps_white {
- label = "white:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "Qihoo 360 C301";
pinctrl-0 = <&jtag_disable_pins>;
led_wlan_g: wlan_g {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
led_wlan_o: wlan_o {
- label = "orange:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_ORANGE>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "ar9344_qxwlan_e750x.dtsi"
/ {
&leds {
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
wan {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
};
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "ar9344_qxwlan_e750x.dtsi"
/ {
&leds {
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
wan {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
aliases {
};
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "ar934x_ruckus_zf73xx.dtsi"
/ {
};
power_red: power-red {
- label = "red:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
panic-indicator;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "Samsung WAM250";
compatible = "gpio-leds";
lan {
- label = "white:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
led_power: power {
- label = "white:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
};
wlan {
- label = "white:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "ar9344_tplink_cpe.dtsi"
/ {
compatible = "gpio-leds";
led_lan: lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "ar9344_tplink_cpe.dtsi"
/ {
compatible = "gpio-leds";
led_lan: lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "ar9344_tplink_cpe.dtsi"
/ {
compatible = "gpio-leds";
led_lan: lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "ar9344_tplink_cpe.dtsi"
/ {
compatible = "gpio-leds";
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "ar9344_tplink_tl-wdrxxxx.dtsi"
/ {
&leds {
usb {
- label = "green:usb";
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
linux,default-trigger = "usbport";
trigger-sources = <&hub_port>;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "TP-Link TL-WR841HP v2";
compatible = "gpio-leds";
wan {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
};
wps {
- label = "green:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "ar9344_senao_ap-dual.dtsi"
/ {
compatible = "gpio-leds";
led_power_amber: power_amber {
- label = "amber:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
led_power_green: power_green {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
default-state = "on";
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "ar9344_senao_ap-dual.dtsi"
/ {
compatible = "gpio-leds";
led_power_amber: power_amber {
- label = "amber:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
led_power_green: power_green {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
default-state = "on";
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "ar9344_wd_mynet-nxxx.dtsi"
/ {
};
wps {
- label = "blue:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
};
led_power: power {
- label = "blue:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "Western Digital My Net Wi-Fi Range Extender";
compatible = "gpio-leds";
led_power: power {
- label = "blue:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
/* LED has no off state. It's either on or it blinks */
};
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "Winchannel WB2000";
};
usb {
- label = "green:usb";
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
trigger-sources = <&hub_port>;
linux,default-trigger = "usbport";
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/mtd/partitions/uimage.h>
/ {
<&clks_disable_pins>;
power_green: power-green {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
default-state = "on";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "alcatel,hh40v", "qca,qca9531";
pinctrl-0 = <&jtag_disable_pins>;
lan_active {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
led_lan_link: lan_link {
- label = "orange:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_ORANGE>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
wan_active {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
wan_link {
- label = "orange:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_ORANGE>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca9531_alfa-network_r36a.dtsi"
/ {
};
led_usb: usb {
- label = "green:usb";
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
linux,default-trigger = "usbport";
trigger-sources = <&hub_port0>;
};
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca9531_alfa-network_r36a.dtsi"
/ {
};
led_usb: usb {
- label = "green:usb";
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
linux,default-trigger = "usbport";
trigger-sources = <&gl850g_port1>, <&gl850g_port2>,
};
wlan {
- label = "blue:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca9531_alfa-network_r36a.dtsi"
/ {
pinctrl-0 = <&enable_gpio4 &enable_gpio16>;
lan {
- label = "blue:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
led_status: status {
- label = "blue:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
usb {
- label = "blue:usb";
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port0>;
linux,default-trigger = "usbport";
};
wan {
- label = "blue:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
wlan {
- label = "blue:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca9531_alfa-network_r36a.dtsi"
/ {
pinctrl-0 = <&enable_gpio4 &enable_gpio16>;
lan {
- label = "blue:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "ASUS RP-AC51";
compatible = "gpio-leds";
led_power: power {
- label = "blue:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
};
led_wps: wps {
- label = "red:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
};
lan {
- label = "blue:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "comfast,cf-e130n-v2", "qca,qca9531";
pinctrl-names = "default";
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "comfast,cf-e313ac", "qca,qca9531";
pinctrl-names = "default";
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
wan {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "comfast,cf-e314n-v2", "qca,qca9531";
pinctrl-0 = <&jtag_disable_pins &led_rssilow_pin &led_rssimediumhigh_pin &led_rssihigh_pin>;
wan {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
};
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "comfast,cf-e5", "qca,qca9531";
pinctrl-0 = <&jtag_disable_pins &led_wan_pin>;
wan {
- label = "blue:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
lan {
- label = "blue:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
wlan {
- label = "blue:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "comfast,cf-e560ac", "qca,qca9531";
};
wan {
- label = "blue:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
wlan {
- label = "blue:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "comfast,cf-ew72", "qca,qca9531";
pinctrl-0 = <&jtag_disable_pins>;
lan {
- label = "blue:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
led_wan: wan {
- label = "blue:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
wlan {
- label = "blue:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "comfast,cf-wr752ac-v1", "qca,qca9531";
pinctrl-0 = <&jtag_disable_pins &pinmux_led_rssihigh &pinmux_led_rssilow>;
led_lan: lan {
- label = "blue:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "dlink,dch-g020-a1", "qca,qca9531";
compatible = "gpio-leds";
led_power: power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
status {
- label = "red:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "engenius,ews511ap", "qca,qca9531";
compatible = "gpio-leds";
led_power: power {
- label = "amber:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
default-state = "on";
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca9531_glinet_gl-ar300m.dtsi"
/ {
};
&led_status {
- label = "red:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
};
&led_wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
aliases {
// Colors for non-Lite versions
led_status: status {
- label = "green:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
led_wlan: wlan {
- label = "red:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "glinet,gl-ar750", "qca,qca9531";
compatible = "gpio-leds";
led_power: power {
- label = "white:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
default-state = "on";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "glinet,gl-x300b", "qca,qca9531";
};
wan {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "glinet,gl-x750", "qca,qca9531";
compatible = "gpio-leds";
power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
default-state = "on";
};
};
wan {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "glinet,gl-xe300", "qca,qca9531";
lan {
gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
};
wan {
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
};
wlan {
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
linux,default-trigger = "phy0tpt";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "joyit,jt-or750i", "qca,qca9531";
pinctrl-0 = <&jtag_disable_pins &pinmux_led_eth_pins>;
led_status_green: status_green {
- label = "green:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
default-state = "on";
};
led_status_red: status_red {
- label = "red:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca9531_qxwlan_e600g.dtsi"
/ {
&leds {
wlan {
- label = "blue:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca9531_qxwlan_e600g.dtsi"
/ {
&leds {
wlan {
- label = "blue:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
aliases {
};
wan {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "telco,t1", "qca,qca9531";
pinctrl-0 = <&jtag_disable_pins &pinmux_led_wan_pin>;
wan {
- label = "blue:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
lan {
- label = "blue:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
wlan {
- label = "blue:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include "qca953x.dtsi"
/ {
pinctrl-0 = <&pmx_leds_switch>, <&jtag_disable_pins>;
led_wan: wan {
- label = "yellow:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_YELLOW>;
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "tplink,archer-d50-v1", "qca,qca9531";
};
wan {
- label = "white:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
lan {
- label = "white:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
usb {
- label = "white:usb";
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port0>;
linux,default-trigger = "usbport";
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "tplink,tl-mr3420-v3", "qca,qca9531";
};
wan {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
};
wan_fail {
- label = "orange:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_ORANGE>;
gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
};
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
usb {
- label = "green:usb";
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port0>;
linux,default-trigger = "usbport";
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "tplink,tl-mr6400-v1", "qca,qca9531";
/* D12 */
wan {
- label = "white:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
};
/* D5 */
wps {
- label = "white:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
};
/* D3 */
wlan {
- label = "white:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
/* D2 */
led_power: power {
- label = "white:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
};
/* D4 */
lan {
- label = "white:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "tplink,tl-wr902ac-v1", "qca,qca9531";
compatible = "gpio-leds";
led_power: power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
};
usb {
- label = "green:usb";
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
trigger-sources = <&hub_port0>;
linux,default-trigger = "usbport";
};
wps {
- label = "green:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "Wallys DR531";
compatible = "gpio-leds";
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
};
wan {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "YunCore A770";
compatible = "gpio-leds";
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
led_status: status {
- label = "green:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
wan {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "comfast,cf-e110n-v2", "qca,qca9533";
pinctrl-0 = <&jtag_disable_pins &led_rssilow_pin &led_rssimediumhigh_pin &led_rssihigh_pin>;
wan {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
compatible = "gpio-leds";
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
aliases {
compatible = "gpio-leds";
led_power: power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
led_status: status {
- label = "red:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca953x_dlink_dap-2xxx.dtsi"
/ {
compatible = "gpio-leds";
led_power_green: power_green {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
default-state = "on";
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca953x_dlink_dap-2xxx.dtsi"
/ {
compatible = "gpio-leds";
led_power_green: power_green {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
default-state = "on";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/mtd/partitions/uimage.h>
/ {
};
wan {
- label = "white:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca9533_mikrotik_routerboard-16m.dtsi"
/ {
pinctrl-0 = <&led_wan_pin>;
power {
- label = "blue:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
};
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca9533_mikrotik_routerboard-16m.dtsi"
/ {
compatible = "gpio-leds";
power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
default-state = "on";
};
};
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio_ext 4 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca9533_mikrotik_routerboard-16m.dtsi"
/ {
pinctrl-0 = <&led_power_pin &led_lan_pin>;
power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
};
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca9533_mikrotik_routerboard-16m.dtsi"
/ {
pinctrl-0 = <&led_lan_pin>;
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca9533_mikrotik_routerboard-16m.dtsi"
/ {
};
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
chosen {
compatible = "gpio-leds";
led_power_blue: power_blue {
- label = "blue:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
default-state = "on";
};
};
wan_blue {
- label = "blue:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
lan_blue {
- label = "blue:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
chosen {
compatible = "gpio-leds";
status_red {
- label = "red:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
};
led_status_green: status_green {
- label = "green:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
};
status_blue {
- label = "blue:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/mtd/partitions/uimage.h>
/ {
compatible = "gpio-leds";
wan {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
led_wps: wps {
- label = "green:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca9533_tplink_cpexxx.dtsi"
&leds {
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
aliases {
compatible = "gpio-leds";
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
};
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "tplink,tl-wa850re-v2", "qca,qca9533";
pinctrl-0 = <&jtag_disable_pins>;
lan {
- label = "blue:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
};
wlan {
- label = "blue:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca9533_tplink_tl-wr841.dtsi"
/ {
};
wan_orange {
- label = "orange:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_ORANGE>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
aliases {
compatible = "gpio-leds";
wifi {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
wan {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "tplink,tl-wr841hp-v3", "qca,qca9533";
};
led_power: power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wan_green {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
wan_amber {
- label = "amber:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
wps {
- label = "green:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "tplink,tl-wr842n-v3", "qca,qca9533";
compatible = "gpio-leds";
led_power: power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wifi {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
wan_green {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
wan_red {
- label = "red:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
};
usb {
- label = "green:usb";
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
linux,default-trigger = "usbport";
trigger-sources = <&hub_port0>;
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca9556_avm_fritz-repeater.dtsi"
#include <dt-bindings/gpio/gpio.h>
compatible = "gpio-leds";
led_power: power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&spi_gpio 6 GPIO_ACTIVE_HIGH>;
};
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&spi_gpio 5 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy1tpt";
};
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca9556_avm_fritz-repeater.dtsi"
#include <dt-bindings/gpio/gpio.h>
compatible = "gpio-leds";
led_power: power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
};
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca9556_avm_fritz-repeater.dtsi"
/ {
compatible = "gpio-leds";
led_power: power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&spi_gpio 6 GPIO_ACTIVE_LOW>;
};
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&spi_gpio 7 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "araknis,an-500-ap-i-ac", "qca,qca9557";
compatible = "gpio-leds";
led_power: power {
- label = "amber:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
wps {
- label = "blue:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "buffalo,bhr-4grv2", "qca,qca9557";
compatible = "gpio-leds";
led_power: power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
default-state = "on";
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca955x_dlink_dap-2xxx.dtsi"
/ {
compatible = "gpio-leds";
led_power_red: power_red {
- label = "red:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
led_power_green: power_green {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
default-state = "on";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
aliases {
compatible = "gpio-leds";
led_wan: wan {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
};
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "engenius,eap1200h", "qca,qca9557";
compatible = "gpio-leds";
led_power: power {
- label = "amber:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
default-state = "on";
};
};
wps {
- label = "blue:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "engenius,enstationac-v1", "qca,qca9557";
compatible = "gpio-leds";
led_power: power {
- label = "amber:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca955x_senao_router-dual.dtsi"
/ {
compatible = "gpio-leds";
led_power: power {
- label = "amber:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
default-state = "on";
};
};
wps_amber {
- label = "amber:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
};
wps_blue {
- label = "blue:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "extreme-networks,ws-ap3805i", "qca,qca9557";
compatible = "gpio-leds";
led_power_green: power_green {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
led_power_amber: power_amber {
- label = "amber:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
aliases {
compatible = "gpio-leds";
led_power: power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
compatible = "gpio-leds";
white: white {
- label = "white:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
};
orange: orange {
- label = "orange:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_ORANGE>;
gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
panic-indicator;
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca955x_zyxel_nbg6x16.dtsi"
/ {
compatible = "gpio-leds";
led_power: power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
};
wps {
- label = "green:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "allnet,all-wap02860ac", "qca,qca9558";
compatible = "gpio-leds";
led_power: power {
- label = "amber:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
default-state = "on";
};
};
wps {
- label = "blue:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "araknis,an-700-ap-i-ac", "qca,qca9558";
compatible = "gpio-leds";
led_power: power {
- label = "amber:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
wps {
- label = "blue:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "aruba,ap-115", "qca,qca9558";
compatible = "gpio-leds";
led_power_green: power-green {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
led_power_red: power-red {
- label = "red:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/mtd/partitions/uimage.h>
/ {
};
status {
- label = "amber:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
wps-amber {
- label = "amber:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
wps-blue {
- label = "blue:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "comfast,cf-e380ac-v2", "qca,qca9558";
pinctrl-0 = <&jtag_disable_pins>;
led_lan: lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
keys {
compatible = "gpio-leds";
wps {
- label = "blue:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca9558_devolo_dvl1xxx.dtsi"
/ {
compatible = "gpio-leds";
led_status_blue: status_blue {
- label = "blue:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
led_status_red: status_red {
- label = "red:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca9558_devolo_dvl1xxx.dtsi"
/ {
compatible = "gpio-leds";
led_status_blue: status_blue {
- label = "blue:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
led_status_red: status_red {
- label = "red:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca9558_devolo_dvl1xxx.dtsi"
/ {
compatible = "gpio-leds";
led_status_blue: status_blue {
- label = "blue:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
led_status_red: status_red {
- label = "red:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca9558_devolo_dvl1xxx.dtsi"
/ {
compatible = "gpio-leds";
led_status_blue: status_blue {
- label = "blue:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
led_status_red: status_red {
- label = "red:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca9558_devolo_dvl1xxx.dtsi"
/ {
compatible = "gpio-leds";
led_status_blue: status_blue {
- label = "blue:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
led_status_red: status_red {
- label = "red:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca9558_devolo_dvl1xxx.dtsi"
/ {
led_status_red: status_red {
/* This LED is not visible on the external casing. */
- label = "red:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca955x_dlink_dap-2xxx.dtsi"
/ {
compatible = "gpio-leds";
led_power_red: power_red {
- label = "red:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
led_power_green: power_green {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
default-state = "on";
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca955x_dlink_dap-2xxx.dtsi"
/ {
compatible = "gpio-leds";
led_power_green: power_green {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
default-state = "on";
};
led_power_red: power_red {
- label = "red:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca955x_dlink_dap-2xxx.dtsi"
/ {
compatible = "gpio-leds";
led_power_red: power_red {
- label = "red:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
led_power_green: power_green {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
default-state = "on";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "domywifi,dw33d", "qca,qca9558";
};
usb {
- label = "blue:usb";
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port1>;
linux,default-trigger = "usbport";
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "engenius,eap1750h", "qca,qca9558";
compatible = "gpio-leds";
led_power: power {
- label = "amber:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
default-state = "on";
};
};
wps {
- label = "blue:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca955x_senao_router-dual.dtsi"
/ {
compatible = "gpio-leds";
led_power: power {
- label = "amber:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
default-state = "on";
};
};
wps_amber {
- label = "amber:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
};
wps_blue {
- label = "blue:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca955x_senao_router-dual.dtsi"
/ {
compatible = "gpio-leds";
led_power: power {
- label = "amber:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
default-state = "on";
};
};
wps_amber {
- label = "amber:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
};
wps_blue {
- label = "blue:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca955x_senao_router-dual.dtsi"
/ {
compatible = "gpio-leds";
led_power: power {
- label = "amber:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
default-state = "on";
};
};
wps_amber {
- label = "amber:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
};
wps_blue {
- label = "blue:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "librerouter,librerouter-v1", "qca,qca9558";
};
status_blue {
- label = "blue:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "Netgear EX7300";
compatible = "gpio-leds";
led_power_green: power_green {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
led_power_amber: power_amber {
- label = "amber:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
};
wps_green {
- label = "green:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "ocedo,koala", "qca,qca9558";
compatible = "gpio-leds";
power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
default-state = "on";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
chosen {
compatible = "gpio-leds";
status_blue {
- label = "blue:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
};
status_red {
- label = "red:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
};
led_status_green: status_green {
- label = "green:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
chosen {
compatible = "gpio-leds";
lan_blue {
- label = "blue:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
};
status_green {
- label = "green:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
status_red {
- label = "red:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
};
led_power_blue: power_blue {
- label = "blue:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
default-state = "on";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "openmesh,om5p-ac-v1", "qca,qca9558";
compatible = "gpio-leds";
led_power_blue: power_blue {
- label = "blue:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wan_blue {
- label = "blue:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
lan_blue {
- label = "blue:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "openmesh,om5p-ac-v2", "qca,qca9558";
};
led_power_blue: power_blue {
- label = "blue:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
aliases {
compatible = "gpio-leds";
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "Sitecom WLR-8100 (X8 AC1750)";
compatible = "gpio-leds";
led_status_amber: status_amber {
- label = "amber:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
default-state = "on";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
aliases {
compatible = "gpio-leds";
led_status_green: status_green {
- label = "green:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
led_status_red: status_red {
- label = "red:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "sophos,ap15", "qca,qca9558";
compatible = "gpio-leds";
led_status_green: status_green {
- label = "green:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
default-state = "on";
};
led_status_yellow: status_yellow {
- label = "yellow:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_YELLOW>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
aliases {
};
wlan {
- label = "white:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
lan {
- label = "white:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
};
usb {
- label = "white:usb";
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port1>, <&hub_port0>;
linux,default-trigger = "usbport";
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "TP-Link RE350K v1";
compatible = "gpio-leds";
led_power: power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
default-state = "on";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
aliases {
compatible = "gpio-leds";
led_power: power {
- label = "blue:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
};
wps_blue {
- label = "blue:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
};
wps_red {
- label = "red:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
aliases {
};
usb {
- label = "green:usb";
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port0>;
linux,default-trigger = "usbport";
};
wifi_green {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wifi_wps {
- label = "green:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "tplink,tl-wr941n-v7-cn", "qca,qca9558";
};
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "trendnet,tew-823dru", "qca,qca9558";
compatible = "gpio-leds";
power_orange {
- label = "orange:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_ORANGE>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
led_power_green: power_green {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
* based on device tree from qca9558_ubnt_powerbeam-5ac-500.dts
*/
+#include <dt-bindings/leds/common.h>
+
#include "qca955x_ubnt_xc.dtsi"
/ {
gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
};
led_power: power {
- label = "blue:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
default-state = "on";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "watchguard,ap300", "qca,qca9558";
compatible = "gpio-leds";
led_power: power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
default-state = "on";
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca955x_zyxel_nbg6x16.dtsi"
/ {
compatible = "gpio-leds";
led_power: power {
- label = "white:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
};
wps {
- label = "white:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
aliases {
compatible = "gpio-leds";
led_power: power {
- label = "amber:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
default-state = "on";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "avm,fritz4020", "qca,qca9560";
compatible = "gpio-leds";
led_power: power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
};
wan {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "NEC Aterm WF1200CR";
/* other LEDs are connected to ath10k (QCA9888) gpiochip */
led_power_green: power_green {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
led_power_red: power_red {
- label = "red:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "tplink,archer-c25-v1", "qca,qca9561";
compatible = "gpio-leds";
led_power: power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wps {
- label = "green:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
};
wan_green {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
};
wan_amber {
- label = "amber:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca9561_tplink_archer-c5x.dtsi"
/ {
&leds {
usb {
- label = "green:usb";
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
linux,default-trigger = "usbport";
trigger-sources = <&hub_port0>;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "tplink,archer-c5x", "qca,qca9560";
compatible = "gpio-leds";
led_power: power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
default-state = "on";
};
};
wan_green {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
};
wan_amber {
- label = "amber:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
};
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
};
wps {
- label = "green:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
};
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca9561_tplink_archer-c6x.dtsi"
/ {
&leds {
wan_amber {
- label = "amber:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
};
wps {
- label = "green:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca9561_tplink_archer-c6x.dtsi"
/ {
&leds {
wan_amber {
- label = "amber:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
};
wps {
- label = "green:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca9561_tplink_archer-c6x.dtsi"
/ {
&leds {
wan_amber {
- label = "amber:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
aliases {
compatible = "gpio-leds";
led_power: power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
default-state = "on";
};
};
wan_green {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "tplink,eap225-wall-v2", "qca,qca9561";
compatible = "gpio-leds";
led_status: status {
- label = "white:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
default-state = "on";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "tplink,tl-wdr6500-v2", "qca,qca9561";
};
wan {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "ASUS PL-AC56";
compatible = "gpio-leds";
led_power: power {
- label = "red:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
compatible = "gpio-leds";
led_power: power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
};
led_orange: wps {
- label = "orange:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_ORANGE>;
gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "COMFAST CF-E375AC";
compatible = "gpio-leds";
led_lan: lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
};
wan {
- label = "red:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/mtd/partitions/uimage.h>
/ {
pinctrl-0 = <&jtag_disable_pins>;
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
led_power_green: power_green {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
default-state = "on";
};
};
led_power_red: power_red {
- label = "red:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
aliases {
compatible = "gpio-leds";
led_power: power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
};
wps {
- label = "green:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca9563_dlink_dir-8x9-a1.dtsi"
/ {
compatible = "gpio-leds";
wps {
- label = "green:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
led_power: power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
};
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca9563_dlink_dir-8x9-a1.dtsi"
/ {
compatible = "gpio-leds";
led_power_orange: power_orange {
- label = "orange:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_ORANGE>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
led_power_white: power_white {
- label = "white:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca9563_elecom_wrc-ghbk2-i.dtsi"
/ {
&leds {
led_power: power {
- label = "blue:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca9563_elecom_wrc-ghbk2-i.dtsi"
/ {
&leds {
led_power: power {
- label = "white:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
aliases {
compatible = "gpio-leds";
wps {
- label = "red:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "glinet,gl-ar750s", "qca,qca9563";
compatible = "gpio-leds";
led_power: power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "NEC Aterm WG1200CR";
/* other LEDs are connected to ath10k (QCA9888) gpiochip */
led_power_green: power_green {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
default-state = "on";
};
led_power_red: power_red {
- label = "red:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "NEC Aterm WG800HP";
};
led_power_red: power_red {
- label = "red:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
led_power_green: power_green {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
default-state = "on";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
aliases {
pinctrl-0 = <&jtag_disable_pins>;
led_power_green: power_green {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
};
led_power_amber: power_amber {
- label = "amber:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
wan_green {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
wan_amber {
- label = "amber:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
};
wps_green {
- label = "green:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca9563_netgear_wndr.dtsi"
/ {
&leds {
usb_green {
- label = "green:usb";
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port0>;
linux,default-trigger = "usbport";
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "Phicomm K2T";
compatible = "gpio-leds";
status_blue {
- label = "blue:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
led_status_red: status_red {
- label = "red:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
};
status_yellow {
- label = "yellow:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_YELLOW>;
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
aliases {
};
usb {
- label = "green:usb";
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port0>;
linux,default-trigger = "usbport";
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "tplink,archer-c2-v3", "qca,qca9563";
};
wifi_wps {
- label = "green:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
wan {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
wan_fail {
- label = "orange:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_ORANGE>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca9563_tplink_archer-x6-v2.dtsi"
/ {
compatible = "gpio-leds";
led_power: power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
default-state = "on";
};
};
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
wan {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
};
wan_fail {
- label = "amber:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
wps {
- label = "green:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca9563_tplink_archer-x6-v2.dtsi"
/ {
compatible = "gpio-leds";
led_power: power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
default-state = "on";
};
};
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
wan {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
};
wan_fail {
- label = "amber:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
wps {
- label = "green:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "tplink,archer-c7-v4", "qca,qca9563";
};
wan {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
};
wan_fail {
- label = "orange:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_ORANGE>;
gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
};
};
wps {
- label = "green:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
aliases {
};
usb {
- label = "green:usb";
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port0>;
linux,default-trigger = "usbport";
};
wan {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
};
wan_fail {
- label = "orange:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_ORANGE>;
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
};
wps {
- label = "green:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "TP-Link CPE710 v1";
compatible = "gpio-leds";
led_lan: lan {
- label = "blue:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include "qca956x.dtsi"
};
led_power: power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
default-state = "on";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include "qca956x.dtsi"
};
led_power: power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
default-state = "on";
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca9563_tplink_eap2x5-1port.dtsi"
/ {
compatible = "gpio-leds";
led_status_green: status_green {
- label = "green:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
default-state = "on";
};
led_status_amber: status_amber {
- label = "amber:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
};
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca9563_tplink_eap2x5-1port.dtsi"
/ {
compatible = "gpio-leds";
led_status_green: status_green {
- label = "green:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
default-state = "on";
};
led_status_amber: status_amber {
- label = "amber:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
};
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca9563_tplink_eap2x5-1port.dtsi"
/ {
compatible = "gpio-leds";
led_status_green: status_green {
- label = "green:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
led_status_amber: status_amber {
- label = "amber:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
};
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca9563_tplink_eap2x5-1port.dtsi"
/ {
compatible = "gpio-leds";
led_status_green: status_green {
- label = "green:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
led_status_amber: status_amber {
- label = "amber:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
};
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca9563_tplink_eap2x5-1port.dtsi"
/ {
compatible = "gpio-leds";
led_status_green: status_green {
- label = "green:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
led_status_amber: status_amber {
- label = "amber:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
};
led_status_red: status_red {
- label = "red:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "tplink,eap245-v3", "qca,qca9563";
compatible = "gpio-leds";
led_status_green: status_green {
- label = "green:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
led_status_amber: status_amber {
- label = "amber:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
aliases {
compatible = "gpio-leds";
led_power: power {
- label = "blue:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
};
wps_blue {
- label = "blue:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
};
wps_red {
- label = "red:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "tplink,tl-wa1201-v2", "qca,qca9563";
compatible = "gpio-leds";
led_power: power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
default-state = "on";
};
};
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
aliases {
compatible = "gpio-leds";
led_power: power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
aliases {
};
wifi_green {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wifi_wps {
- label = "green:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
wan {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
wan_fail {
- label = "orange:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_ORANGE>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "qca9563_tplink_tl-wr1043n.dtsi"
/ {
&leds {
usb {
- label = "green:usb";
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port0>;
linux,default-trigger = "usbport";
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "Xiaomi AIoT AC2350";
};
wan_blue {
- label = "blue:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
wan_orange {
- label = "orange:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_ORANGE>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
// Copyright (c) 2021 Cezary Jackiewicz
+
+#include <dt-bindings/leds/common.h>
// Copyright (c) 2021, 2022 Lech Perczak
#include "qca9563_zte_mf286.dtsi"
* and slightly through the case below signal state LEDs
*/
color = <LED_COLOR_ID_GREEN>;
- label = "green:debug";
+ function = LED_FUNCTION_DEBUG;
+ color = <LED_COLOR_ID_GREEN>;
};
&boot_flash {
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
// Copyright (c) 2021 Cezary Jackiewicz
+
+#include <dt-bindings/leds/common.h>
// Copyright (c) 2021, 2022 Lech Perczak
#include "qca9563_zte_mf286.dtsi"
* and slightly through the case below signal state LEDs
*/
color = <LED_COLOR_ID_BLUE>;
- label = "blue:debug";
+ function = LED_FUNCTION_DEBUG;
+ color = <LED_COLOR_ID_BLUE>;
};
&boot_flash {
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
aliases {
compatible = "gpio-leds";
led_power: power {
- label = "blue:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
usb {
- label = "blue:usb";
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port0>;
linux,default-trigger = "usbport";
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "Netgear EX7300 v2";
compatible = "gpio-leds";
led_power_green: power_green {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
led_power_amber: power_amber {
- label = "amber:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
};
wps_green {
- label = "green:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "TP-Link Archer A9 v6";
compatible = "gpio-leds";
led_power: power {
- label = "green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
default-state = "on";
};
usb {
- label = "green:usb";
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
trigger-sources = <&hub_port0>;
linux,default-trigger = "usbport";
};
wan {
- label = "green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
wan_orange {
- label = "orange:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_ORANGE>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
};
wps {
- label = "green:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "tp9343_tplink_tl-wx.dtsi"
/ {
};
lan {
- label = "green:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
};
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "tp9343_tplink_tl-wr94x.dtsi"
/ {
};
wlan {
- label = "blue:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wan_blue {
- label = "blue:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
wan_red {
- label = "red:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "tp9343_tplink_tl-wr94x.dtsi"
/ {
};
wlan {
- label = "blue:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wan_blue {
- label = "blue:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
wan_red {
- label = "red:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
+
#include "tp9343_tplink_tl-wr94x.dtsi"
/ {
compatible = "gpio-leds";
wan_blue {
- label = "blue:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "tplink,tl-wr941hp-v1", "qca,tp9343";
};
led_power: power {
- label = "blue:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wan_blue {
- label = "blue:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
wan_red {
- label = "red:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_RED>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
lan {
- label = "blue:lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
};
wps {
- label = "blue:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
};
projects / openwrt / openwrt.git / commitdiff