target/linux/ramips/dts/mt7628an_wavlink_wl-wn575a3.dts

   1 /dts-v1/;
   2 #include <dt-bindings/input/input.h>
   3 #include <dt-bindings/gpio/gpio.h>
   4
   5 #include "mt7628an.dtsi"
   6
   7 / {
   8         compatible = "wavlink,wl-wn575a3", "mediatek,mt7628an-soc";
   9         model = "Wavlink WL-WN575A3";
  10
  11         chosen {
  12                 bootargs = "console=ttyS0,57600";
  13         };
  14
  15         memory@0 {
  16                 device_type = "memory";
  17                 reg = <0x0 0x4000000>;
  18         };
  19
  20         keys {
  21                 compatible = "gpio-keys-polled";
  22                 poll-interval = <20>;
  23
  24                 reset {
  25                         label = "reset";
  26                         gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
  27                         linux,code = <KEY_RESTART>;
  28                 };
  29
  30                 wps {
  31                         label = "wps";
  32                         gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
  33                         linux,code = <KEY_WPS_BUTTON>;
  34                 };
  35         };
  36
  37         leds {
  38                 compatible = "gpio-leds";
  39
  40                 wifi-high {
  41                         label = "wl-wn575a3:green:wifi-high";
  42                         gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
  43                 };
  44
  45                 wifi-med {
  46                         label = "wl-wn575a3:green:wifi-med";
  47                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  48                 };
  49
  50                 wifi-low {
  51                         label = "wl-wn575a3:green:wifi-low";
  52                         gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
  53                 };
  54
  55                 wps {
  56                         label = "wl-wn575a3:green:wps";
  57                         gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
  58                 };
  59         };
  60 };
  61
  62 &pinctrl {
  63         state_default: pinctrl0 {
  64                 gpio {
  65                         ralink,group = "i2c", "wled_an", "gpio", "refclk", "wdt", "p0led_an";
  66                         ralink,function = "gpio";
  67                 };
  68         };
  69 };
  70
  71 &pcie {
  72         status = "okay";
  73 };
  74
  75 &pcie0 {
  76         mt76@0,0 {
  77                 reg = <0x0000 0 0 0 0>;
  78                 mediatek,mtd-eeprom = <&factory 0x8000>;
  79                 ieee80211-freq-limit = <5000000 6000000>;
  80         };
  81 };
  82
  83 &spi0 {
  84         status = "okay";
  85
  86         flash@0 {
  87                 compatible = "jedec,spi-nor";
  88                 reg = <0>;
  89                 spi-max-frequency = <10000000>;
  90
  91                 partitions {
  92                         compatible = "fixed-partitions";
  93                         #address-cells = <1>;
  94                         #size-cells = <1>;
  95
  96                         partition@0 {
  97                                 label = "u-boot";
  98                                 reg = <0x0 0x30000>;
  99                                 read-only;
 100                         };
 101
 102                         partition@30000 {
 103                                 label = "u-boot-env";
 104                                 reg = <0x30000 0x10000>;
 105                                 read-only;
 106                         };
 107
 108                         factory: partition@40000 {
 109                                 label = "factory";
 110                                 reg = <0x40000 0x10000>;
 111                                 read-only;
 112                         };
 113
 114                         partition@50000 {
 115                                 compatible = "denx,uimage";
 116                                 label = "firmware";
 117                                 reg = <0x50000 0x7b0000>;
 118                         };
 119                 };
 120         };
 121 };
 122
 123 &wmac {
 124         status = "okay";
 125 };
 126
 127 &ethernet {
 128         mtd-mac-address = <&factory 0x28>;
 129         mediatek,portmap = "llllw";
 130 };