+++ /dev/null
-/*
- * BSD LICENSE
- *
- * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the names of the copyright holders nor the names of any
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-#include "mt7628an.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "alfa-network,awusfree1", "mediatek,mt7628an-soc";
- model = "ALFA Network AWUSFREE1";
-
- aliases {
- led-boot = &led_system;
- led-failsafe = &led_system;
- led-running = &led_system;
- led-upgrade = &led_system;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_system: system {
- label = "awusfree1:orange:system";
- gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
- };
-
- wlan {
- label = "awusfree1:blue:wlan";
- gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- };
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-};
-
-&ehci {
- status = "disabled";
-};
-
-&esw {
- mediatek,portdisable = <0x1e>;
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x2e>;
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&ohci {
- status = "disabled";
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "p0led_an", "wdt", "wled_an";
- ralink,function = "gpio";
- };
-
- ext_lna {
- ralink,group = "uart1";
- ralink,function = "sw_r";
- };
-
- ext_pa {
- ralink,group = "i2s";
- ralink,function = "antenna";
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x1000>;
- };
-
- partition@31000 {
- label = "config";
- reg = <0x31000 0xf000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&wmac {
- status = "okay";
- mediatek,mtd-eeprom = <&factory 0x0>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "TPLINK-8M.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- compatible = "tplink,archer-c20-v4", "mediatek,mt7628an-soc";
- model = "TP-Link Archer C20 v4";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- leds {
- compatible = "gpio-leds";
-
- lan {
- label = "c20-v4:green:lan";
- gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
- };
-
- led_power: power {
- label = "c20-v4:green:power";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- };
-
- wan {
- label = "c20-v4:green:wan";
- gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
- };
-
- wan_orange {
- label = "c20-v4:orange:wan";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
-
- wlan5g {
- label = "c20-v4:green:wlan5g";
- gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
- };
-
- wlan2g {
- label = "c20-v4:green:wlan2g";
- gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "c20-v4:green:wps";
- gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- rfkill {
- label = "rfkill";
- gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
- };
-};
-
-&wmac {
- mtd-mac-address-increment = <(-2)>;
-};
-
-ðernet {
- mediatek,portmap = "wllll";
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2s", "refclk", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "wdt";
- ralink,function = "gpio";
- };
- };
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x28000>;
- ieee80211-freq-limit = <5000000 6000000>;
- mtd-mac-address = <&factory 0xf100>;
- mtd-mac-address-increment = <(-1)>;
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "TPLINK-8M.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "tplink,archer-c50-v3", "mediatek,mt7628an-soc";
- model = "TP-Link Archer C50 v3";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- rfkill {
- label = "rfkill";
- gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- lan {
- label = "c50-v3:green:lan";
- gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
- };
-
- led_power: power {
- label = "c50-v3:green:power";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
-
- wan {
- label = "c50-v3:green:wan";
- gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
- };
-
- wan_orange {
- label = "c50-v3:orange:wan";
- gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
- };
-
- wlan {
- label = "c50-v3:green:wlan2g";
- gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- };
-
- wlan5 {
- label = "c50-v3:green:wlan5g";
- gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "c50-v3:green:wps";
- gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "gpio", "p0led_an", "p1led_an", "p2led_an",
- "p3led_an", "p4led_an", "wdt", "wled_an";
- ralink,function = "gpio";
- };
- };
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x28000>;
- ieee80211-freq-limit = <5000000 6000000>;
- mtd-mac-address = <&factory 0xf100>;
- mtd-mac-address-increment = <(-1)>;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "TPLINK-8M-SPLIT-UBOOT.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "tplink,archer-c50-v4", "mediatek,mt7628an-soc";
- model = "TP-Link Archer C50 v4";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- rfkill {
- label = "rfkill";
- gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "c50-v4:green:power";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
-
- wlan2 {
- label = "c50-v4:green:wlan2g";
- gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- };
-
- wlan5 {
- label = "c50-v4:green:wlan5g";
- gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
- };
-
- lan {
- label = "c50-v4:green:lan";
- gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
- };
-
- wan {
- label = "c50-v4:green:wan";
- gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
- };
-
- wan_orange {
- label = "c50-v4:orange:wan";
- gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "c50-v4:green:wps";
- gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "p0led_an", "p1led_an", "p2led_an",
- "p3led_an", "p4led_an", "wdt", "wled_an";
- ralink,function = "gpio";
- };
- };
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- wifi@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&radio 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
- mtd-mac-address = <&rom 0xf100>;
- mtd-mac-address-increment = <(-1)>;
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7628an.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "duzun,dm06", "mediatek,mt7628an-soc";
- model = "DuZun DM06";
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- reset {
- label = "reset";
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- sound {
- compatible = "simple-audio-card";
- simple-audio-card,name = "Audio-I2S";
- simple-audio-card,format = "i2s";
- simple-audio-card,bitclock-master = <&dailink0_master>;
- simple-audio-card,frame-master = <&dailink0_master>;
- simple-audio-card,widgets =
- "Headphone", "Headphones";
- simple-audio-card,routing =
- "Headphones", "HP_L",
- "Headphones", "HP_R";
- simple-audio-card,mclk-fs = <256>;
-
- simple-audio-card,cpu {
- sound-dai = <&i2s>;
- };
-
- dailink0_master: simple-audio-card,codec {
- sound-dai = <&codec>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "wdt", "uart1";
- ralink,function = "gpio";
- };
- };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&i2c {
- status = "okay";
-
- codec: wm8960@1a {
- #sound-dai-cells = <0>;
- compatible = "wlf,wm8960";
- reg = <0x1a>;
-
- wlf,shared-lrclk;
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x3>;
- mediatek,portdisable = <0x3c>;
-};
-
-&i2s {
- #sound-dai-cells = <0>;
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&i2s_pins>, <&refclk_pins>;
-};
-
-&sdhci {
- status = "okay";
-};
-
-&gdma {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <60000000>;
- m25p,fast-read;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7628an.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/{
- compatible = "glinet,gl-mt300n-v2", "mediatek,mt7628an-soc";
- model = "GL-MT300N-V2";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x8000000>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "gl-mt300n-v2:green:power";
- default-state = "on";
- gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
- };
-
- wan {
- label = "gl-mt300n-v2:green:wan";
- gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
- };
-
- wlan {
- label = "gl-mt300n-v2:red:wlan";
- gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- BTN_0 {
- label = "BTN_0";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- };
-
- BTN_1 {
- label = "BTN_1";
- gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_1>;
- };
- };
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- usb {
- gpio-export,name = "usb";
- gpio-export,output = <1>;
- gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "wdt", "gpio", "wled_an", "p0led_an", "p1led_an", "i2s";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&wmac {
- status = "okay";
- ralink,mtd-eeprom = <&factory 0x0>;
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
- };
- };
-};
-
-&uart1 {
- status = "okay";
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7628an.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "hiwifi,hc5661a", "mediatek,mt7628an-soc";
- model = "HiWiFi HC5661A";
-
- aliases {
- led-boot = &led_system;
- led-failsafe = &led_system;
- led-running = &led_system;
- led-upgrade = &led_system;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x8000000>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_system: system {
- label = "hc5661a:blue:system";
- gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
- };
- internet {
- label = "hc5661a:blue:internet";
- gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
- };
- wlan2g {
- label = "hc5661a:blue:wlan2g";
- gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "refclk", "wled_an";
- ralink,function = "gpio";
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- linux,modalias = "m25p80", "w25q128";
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "hw_panic";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xf70000>;
- };
-
- partition@fc0000 {
- label = "oem";
- reg = <0xfc0000 0x20000>;
- read-only;
- };
-
- bdinfo: partition@fe0000 {
- label = "bdinfo";
- reg = <0xfe0000 0x10000>;
- read-only;
- };
-
- partition@ff0000 {
- label = "backup";
- reg = <0xff0000 0x10000>;
- read-only;
- };
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "wllll";
-};
-
-&wmac {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7628an.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "hiwifi,hc5861b", "mediatek,mt7628an-soc";
- model = "HiWiFi HC5861B";
-
- aliases {
- led-boot = &led_system;
- led-failsafe = &led_system;
- led-running = &led_system;
- led-upgrade = &led_system;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x8000000>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_system: system {
- label = "hc5861b:green:system";
- gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
- };
- wlan2g {
- label = "hc5861b:green:wlan2g";
- gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "refclk", "wdt", "wled_an";
- ralink,function = "gpio";
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "hw_panic";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xf70000>;
- };
-
- partition@fc0000 {
- label = "oem";
- reg = <0xfc0000 0x20000>;
- read-only;
- };
-
- bdinfo: partition@fe0000 {
- label = "bdinfo";
- reg = <0xfe0000 0x10000>;
- read-only;
- };
-
- partition@ff0000 {
- label = "backup";
- reg = <0xff0000 0x10000>;
- read-only;
- };
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&wmac {
- status = "okay";
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- wifi@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- mtd-mac-address = <&factory 0x2e>;
- ieee80211-freq-limit = <5000000 6000000>;
-
- led {
- led-sources = <2>;
- led-active-low;
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "mt7628an.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "hilink,hlk-7628n", "mediatek,mt7628an-soc";
- model = "HILINK HLK-7628N";
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x8000000>;
- };
-
- chosen {
- bootargs = "console=ttyS0,57600";
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- wlan {
- label = "hlk-7628n:green:wlan";
- gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c";
- ralink,function = "gpio";
- };
- };
-};
-
-&uart1 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x1fb0000>;
- };
- };
- };
-};
-
-&wmac {
- status = "okay";
-};
-
+++ /dev/null
-/dts-v1/;
-
-#include "mt7628an.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "mediatek,linkit-smart-7688", "mediatek,mt7628an-soc";
- model = "MediaTek LinkIt Smart 7688";
-
- aliases {
- led-boot = &led_wifi;
- led-failsafe = &led_wifi;
- led-running = &led_wifi;
- led-upgrade = &led_wifi;
- };
-
- chosen {
- bootargs = "console=ttyS2,57600";
- };
-
- aliases {
- serial0 = &uart2;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x8000000>;
- };
-
- bootstrap {
- compatible = "mediatek,linkit";
-
- status = "okay";
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_wifi: wifi {
- label = "linkit-smart-7688:orange:wifi";
- gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- wps {
- label = "reset";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "gpio";
- ralink,function = "gpio";
- };
-
- refclk {
- ralink,group = "refclk";
- ralink,function = "gpio";
- };
-
- i2s {
- ralink,group = "i2s";
- ralink,function = "gpio";
- };
-
- spis {
- ralink,group = "spis";
- ralink,function = "gpio";
- };
-
- wled_an {
- ralink,group = "wled_an";
- ralink,function = "gpio";
- };
-
- wdt {
- ralink,group = "wdt";
- ralink,function = "gpio";
- };
- };
-};
-
-&wmac {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <40000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x1fb0000>;
- };
- };
- };
-
- spidev@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "linux,spidev";
- reg = <1>;
- spi-max-frequency = <40000000>;
- };
-};
-
-&i2c {
- status = "okay";
-};
-
-&uart1 {
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-&pwm {
- status = "okay";
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&sdhci {
- status = "okay";
- mediatek,cd-high;
-};
-
-&wmac {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7628an.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "mercury,mac1200r-v2", "mediatek,mt7628an-soc";
- model = "Mercury MAC1200R v2";
-
- aliases {
- led-boot = &led_status;
- led-failsafe = &led_status;
- led-running = &led_status;
- led-upgrade = &led_status;
- };
-
- chosen {
- bootargs = "console=ttyS0,57600";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x2000000>;
- };
-
- leds {
- compatible = "gpio-leds";
- led_status: status {
- label = "mac1200rv2:green:status";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x1d800>;
- };
-
- factory: partition@1d800 {
- label = "factory_info";
- reg = <0x1d800 0x800>;
- read-only;
- };
-
- art: partition@1e000 {
- label = "art";
- reg = <0x1e000 0x2000>;
- read-only;
- };
-
- partition@20000 {
- label = "config";
- reg = <0x20000 0x10000>;
- };
-
- partition@30000 {
- label = "u-boot2";
- reg = <0x30000 0x10000>;
- };
-
- partition@40000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x40000 0x7c0000>;
- };
- };
- };
-};
-
-ðernet {
- pinctrl-names = "default";
- mtd-mac-address = <&factory 0xd>;
- mediatek,portmap = "llllw";
-};
-
-&wmac {
- status = "okay";
- ralink,mtd-eeprom = <&art 0x0>;
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&art 0x1000>;
- ieee80211-freq-limit = <5000000 6000000>;
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7628an.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "xiaomi,miwifi-nano", "mediatek,mt7628an-soc";
- model = "MiWiFi Nano";
-
- aliases {
- led-boot = &led_blue;
- led-failsafe = &led_blue;
- led-running = &led_blue;
- led-upgrade = &led_blue;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_blue: status_blue {
- label = "miwifi-nano:blue:status";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
- status_red {
- label = "miwifi-nano:red:status";
- gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
- };
- status_amber {
- label = "miwifi-nano:amber:status";
- gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "refclk", "wled_an", "gpio";
- ralink,function = "gpio";
- };
- };
-};
-
-&wmac {
- status = "okay";
- ralink,mtd-eeprom = <&factory 0x4>;
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7628an.dtsi"
-
-/ {
- compatible = "mediatek,mt7628an-eval-board", "mediatek,mt7628an-soc";
- model = "Mediatek MT7628AN evaluation board";
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x2000000>;
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c";
- ralink,function = "gpio";
- };
- };
-};
-
-&wmac {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&wmac {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "OMEGA2.dtsi"
-
-/ {
- compatible = "onion,omega2", "mediatek,mt7628an-soc";
- model = "Onion Omega2";
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-};
-
-&firmware {
- reg = <0x50000 0xfb0000>;
-};
-
-&system_led {
- label = "omega2:amber:system";
-};
+++ /dev/null
-#include "mt7628an.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "onion,omega2", "mediatek,mt7628an-soc";
-
- aliases {
- led-boot = &system_led;
- led-failsafe = &system_led;
- led-running = &system_led;
- led-upgrade = &system_led;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- leds {
- compatible = "gpio-leds";
-
- system_led: system {
- gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "gpio";
- ralink,function = "gpio";
- };
-
- perst {
- ralink,group = "perst";
- ralink,function = "gpio";
- };
-
- refclk {
- ralink,group = "refclk";
- ralink,function = "gpio";
- };
-
- i2s {
- ralink,group = "i2s";
- ralink,function = "gpio";
- };
-
- spis {
- ralink,group = "spis";
- ralink,function = "gpio";
- };
-
- wled_kn {
- ralink,group = "wled_kn";
- ralink,function = "gpio";
- };
-
- wled_an {
- ralink,group = "wled_an";
- ralink,function = "gpio";
- };
-
- wdt {
- ralink,group = "wdt";
- ralink,function = "gpio";
- };
-
- pwm0 {
- ralink,group = "pwm0";
- ralink,function = "gpio";
- };
-
- pwm1 {
- ralink,group = "pwm1";
- ralink,function = "gpio";
- };
- };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <40000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- firmware: partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- };
- };
- };
-
- spidev@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "linux,spidev";
- reg = <1>;
- spi-max-frequency = <40000000>;
- };
-};
-
-&i2c {
- status = "okay";
-};
-
-&uart1 {
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&sdhci {
- status = "okay";
- mediatek,cd-low;
-};
-
-&wmac {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "OMEGA2.dtsi"
-
-/ {
- compatible = "onion,omega2p", "onion,omega2", "mediatek,mt7628an-soc";
- model = "Onion Omega2+";
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x8000000>;
- };
-};
-
-&firmware {
- reg = <0x50000 0x1fb0000>;
-};
-
-&system_led {
- label = "omega2p:amber:system";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7628an.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "d-team,pbr-d1", "mediatek,mt7628an-soc";
- model = "PBR-D1";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- aliases {
- serial0 = &uart2;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x8000000>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- usb {
- label = "pbr-d1:orange:usb";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
-
- led_power: power {
- label = "pbr-d1:orange:power";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio1 38 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- wgpio: gpio-wifi {
- compatible = "mediatek,gpio-wifi";
- #address-cells = <1>;
- #size-cells = <0>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "gpio";
- ralink,function = "gpio";
- };
-
- i2c {
- ralink,group = "i2c";
- ralink,function = "gpio";
- };
-
- i2s {
- ralink,group = "i2s";
- ralink,function = "gpio";
- };
-
- spis {
- ralink,group = "spis";
- ralink,function = "gpio";
- };
-
- wdt {
- ralink,group = "wdt";
- ralink,function = "gpio";
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <40000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x0fb0000>;
- };
- };
- };
-
- spidev@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "linux,spidev";
- reg = <1>;
- spi-max-frequency = <40000000>;
- };
-};
-
-&i2c {
- status = "okay";
-};
-
-&uart1 {
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-&pwm {
- status = "okay";
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&sdhci {
- status = "okay";
- mediatek,cd-high;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7628an.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "netgear,r6120", "mediatek,mt7628an-soc";
- model = "Netgear R6120";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- lan {
- label = "r6120:green:lan";
- gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- };
-
- led_power: power {
- label = "r6120:green:power";
- gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
- };
-
- wlan {
- label = "r6120:green:wlan2g";
- gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
- };
-
- wlan_orange {
- label = "r6120:orange:wlan2g";
- gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
- };
-
- wan {
- label = "r6120:green:wan";
- gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
- };
-
- wan_orange {
- label = "r6120:orange:wan";
- gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
- };
- };
-
- usb-regulator {
- compatible = "regulator-fixed";
-
- regulator-name = "USB-power";
- gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
-
- regulator-always-on;
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "p0led_an", "p1led_an", "p2led_an",
- "p3led_an", "p4led_an", "wdt",
- "wled_an", "uart1";
- ralink,function = "gpio";
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x40000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x20000>;
- read-only;
- };
-
- partition@60000 {
- label = "nvram";
- reg = <0x60000 0x30000>;
- read-only;
- };
-
- partition@90000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x90000 0xf60000>;
- };
-
- partition@ff0000 {
- label = "reserved";
- reg = <0xff0000 0x10000>;
- read-only;
- };
- };
- };
-};
-
-&wmac {
- status = "okay";
- mtd-mac-address = <&factory 0x4>;
- mediatek,mtd-eeprom = <&factory 0x0>;
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- wifi@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
- mtd-mac-address = <&factory 0x4>;
- mtd-mac-address-increment = <(2)>;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "mt7628an.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "rakwireless,rak633", "mediatek,mt7628an-soc";
- model = "Rakwireless RAK633";
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- wifi {
- label = "rak633:blue:wifi";
- gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- wled_an {
- ralink,group = "wled_an";
- ralink,function = "gpio";
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&i2c {
- status = "okay";
-};
-
-&i2s {
- status = "okay";
-};
-
-&uart1 {
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-&gdma {
- status = "okay";
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&wmac {
- status = "okay";
- ralink,mtd-eeprom = <&factory 0x4>;
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "mt7628an.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/{
- compatible = "skylab,skw92a", "mediatek,mt7628an-soc";
- model = "SKYLAB SKW92A";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- };
-
- chosen {
- bootargs = "console=ttyS0,57600";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: wps {
- label = "skw92a:green:wps";
- gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
- };
-
- wlan {
- label = "skw92a:green:wlan";
- gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "wdt", "refclk", "wled_an";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&wmac {
- status = "okay";
- ralink,mtd-eeprom = <&factory 0x0>;
-};
-
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- compatible = "denx,uimage";
- };
- };
- };
-};
-
-&uart1 {
- status = "okay";
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7628an.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "tplink,tl-mr3020-v3", "mediatek,mt7628an-soc";
- model = "TP-Link TL-MR3020 v3";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- wps {
- label = "wps";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- modec1 {
- label = "sw1";
- gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- };
-
- modec2 {
- label = "sw2";
- gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_1>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "tl-mr3020-v3:green:power";
- gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
-
- wan {
- label = "tl-mr3020-v3:green:3g";
- gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ehci_port1>, <&ohci_port1>;
- linux,default-trigger = "usbport";
- };
-
- wlan {
- label = "tl-mr3020-v3:green:wlan";
- gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "tl-mr3020-v3:green:wps";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- };
-
- lan {
- label = "tl-mr3020-v3:green:lan";
- gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "boot";
- reg = <0x0 0x20000>;
- read-only;
- };
-
- partition@20000 {
- compatible = "tplink,firmware";
- label = "firmware";
- reg = <0x20000 0x7a0000>;
- };
-
- partition@7c0000 {
- label = "config";
- reg = <0x7c0000 0x10000>;
- read-only;
- };
-
- factory: partition@7d0000 {
- label = "factory";
- reg = <0x7d0000 0x30000>;
- read-only;
- };
- };
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2s", "refclk", "wdt", "p2led_an", "p1led_an", "p0led_an", "wled_an";
- ralink,function = "gpio";
- };
- };
-};
-
-&wmac {
- status = "okay";
- mtd-mac-address = <&factory 0xf100>;
- mediatek,mtd-eeprom = <&factory 0x20000>;
-};
-
-ðernet {
- mtd-mac-address = <&factory 0xf100>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "TPLINK-8M.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "tplink,tl-mr3420-v5", "mediatek,mt7628an-soc";
- model = "TP-Link TL-MR3420 v5";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- rfkill {
- label = "rfkill";
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- lan {
- label = "tl-mr3420-v5:green:lan";
- gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
- };
-
- led_power: power {
- label = "tl-mr3420-v5:green:power";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- };
-
- usb {
- label = "tl-mr3420-v5:green:usb";
- gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
-
- wan {
- label = "tl-mr3420-v5:green:wan";
- gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
- };
-
- wan_amber {
- label = "tl-mr3420-v5:amber:wan";
- gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
- };
-
- wlan {
- label = "tl-mr3420-v5:green:wlan";
- gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "tl-mr3420-v5:green:wps";
- gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "i2s", "p2led_an", "refclk", "uart1", "wdt", "wled_an";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "TPLINK-8M.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "tplink,tl-wa801nd-v5", "mediatek,mt7628an-soc";
- model = "TP-Link TL-WA801ND v5";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "tl-wa801nd-v5:green:power";
- gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
- };
-
- lan {
- label = "tl-wa801nd-v5:green:lan";
- gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
- };
-
- wlan {
- label = "tl-wa801nd-v5:green:wlan";
- gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "tl-wa801nd-v5:orange:wps";
- gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "p0led_an", "perst", "refclk", "wdt", "wled_an";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "TPLINK-8M.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "tplink,tl-wr802n-v4", "mediatek,mt7628an-soc";
- model = "TP-Link TL-WR802N v4";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "tl-wr802n-v4:green:power";
- gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "refclk", "wdt";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0xf100>;
- mediatek,portmap = "l";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "TPLINK-8M.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "tplink,tl-wr840n-v4", "mediatek,mt7628an-soc";
- model = "TP-Link TL-WR840N v4";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- lan {
- label = "tl-wr840n-v4:green:lan";
- gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
- };
-
- led_power: power {
- label = "tl-wr840n-v4:green:power";
- gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
- };
-
- wan {
- label = "tl-wr840n-v4:green:wan";
- gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
- };
-
- wlan {
- label = "tl-wr840n-v4:green:wlan";
- gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "tl-wr840n-v4:green:wps";
- gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "p0led_an", "p2led_an", "perst", "refclk", "wdt", "wled_an";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7628an.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "tplink,tl-wr840n-v5", "mediatek,mt7628an-soc";
- model = "TP-Link TL-WR840N v5";
-
- aliases {
- led-boot = &led_power_green;
- led-failsafe = &led_power_green;
- led-running = &led_power_green;
- led-upgrade = &led_power_green;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
- /* LED used is dual-color,dual lead LED */
- leds {
- compatible = "gpio-leds";
-
- led_power_green: power {
- label = "tl-wr840n-v5:green:power";
- gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
- };
-
- orange {
- label = "tl-wr840n-v5:orange:power";
- gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "boot";
- reg = <0x0 0x20000>;
- read-only;
- };
-
- partition@20000 {
- compatible = "tplink,firmware";
- label = "firmware";
- reg = <0x20000 0x3d0000>;
- };
-
- factory: partition@3f0000 {
- label = "factory";
- reg = <0x3f0000 0x10000>;
- read-only;
- };
- };
- };
-};
-
-&ehci {
- status = "disabled";
-};
-
-&ohci {
- status = "disabled";
-};
-
-&wmac {
- status = "okay";
- mtd-mac-address = <&factory 0xf100>;
- mediatek,mtd-eeprom = <&factory 0x0>;
-};
-
-ðernet {
- mtd-mac-address = <&factory 0xf100>;
- mediatek,portmap = "wllll";
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "p0led_an", "p2led_an", "perst";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "TPLINK-8M.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "tplink,tl-wr841n-v13", "mediatek,mt7628an-soc";
- model = "TP-Link TL-WR841N v13";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- rfkill {
- label = "rfkill";
- gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "tl-wr841n-v13:green:power";
- gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "tl-wr841n-v13:green:wps";
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- };
-
- lan1 {
- label = "tl-wr841n-v13:green:lan1";
- gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
- };
-
- lan2 {
- label = "tl-wr841n-v13:green:lan2";
- gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
- };
-
- lan3 {
- label = "tl-wr841n-v13:green:lan3";
- gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
- };
-
- lan4 {
- label = "tl-wr841n-v13:green:lan4";
- gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
- };
-
- wan_green {
- label = "tl-wr841n-v13:green:wan";
- gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
- };
-
- wan_orange {
- label = "tl-wr841n-v13:orange:wan";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
-
- wlan {
- label = "tl-wr841n-v13:green:wlan";
- gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "gpio", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "perst", "refclk", "uart1", "wdt", "wled_an";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "mt7628an.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "tplink,tl-wr841n-v14", "mediatek,mt7628an-soc";
- model = "TP-Link TL-WR841N v14";
-
- aliases {
- led-boot = &led_wlan;
- led-failsafe = &led_wlan;
- led-upgrade = &led_wlan;
-
- led-wlan = &led_wlan;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x2000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- lan {
- label = "tl-wr841n-v14:green:lan";
- gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
- };
-
- wan_green {
- label = "tl-wr841n-v14:green:wan";
- gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
- };
-
- led_wlan: wlan {
- label = "tl-wr841n-v14:green:wlan";
- gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy0tpt";
- };
-
- wan_orange {
- label = "tl-wr841n-v14:orange:wan";
- gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
- m25p,chunked-io = <32>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "boot";
- reg = <0x0 0x10000>;
- read-only;
- };
-
- partition@10000 {
- compatible = "tplink,firmware";
- label = "firmware";
- reg = <0x10000 0x3e0000>;
- };
-
- factory: partition@3f0000 {
- label = "factory";
- reg = <0x3f0000 0x10000>;
- read-only;
- };
- };
- };
-};
-
-&ehci {
- status = "disabled";
-};
-
-&ohci {
- status = "disabled";
-};
-
-&wmac {
- status = "okay";
- mtd-mac-address = <&factory 0xf100>;
- mediatek,mtd-eeprom = <&factory 0x10000>;
-};
-
-ðernet {
- mtd-mac-address = <&factory 0xf100>;
- mediatek,portmap = "wllll";
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "p4led_an", "p3led_an", "p2led_an", "p1led_an", "p0led_an", "wdt";
- ralink,function = "gpio";
- };
- };
-};
-
-&gpio1 {
- led_wlan_enable {
- gpio-hog;
- gpios = <11 GPIO_ACTIVE_HIGH>;
- output-high;
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "TPLINK-8M.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "tplink,tl-wr842n-v5", "mediatek,mt7628an-soc";
- model = "TP-Link TL-WR842N v5";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- rfkill {
- label = "rfkill";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- lan {
- label = "tl-wr842n-v5:green:lan";
- gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
- };
-
- led_power: power {
- label = "tl-wr842n-v5:green:power";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- };
-
- usb {
- label = "tl-wr842n-v5:green:usb";
- gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
-
- wan {
- label = "tl-wr842n-v5:green:wan";
- gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
- };
-
- wan_amber {
- label = "tl-wr842n-v5:amber:wan";
- gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
- };
-
- wlan {
- label = "tl-wr842n-v5:green:wlan";
- gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "tl-wr842n-v5:green:wps";
- gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "i2s", "p2led_an", "refclk", "uart1", "wdt", "wled_an";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "TPLINK-8M.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "tplink,tl-wr902ac-v3", "mediatek,mt7628an-soc";
- model = "TP-Link TL-WR902AC v3";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- sw1 {
- label = "sw1";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- };
-
- sw2 {
- label = "sw2";
- gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_1>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- lan {
- label = "tl-wr902ac-v3:green:lan";
- gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
- };
-
- led_power: power {
- label = "tl-wr902ac-v3:green:power";
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- };
-
- usb {
- label = "tl-wr902ac-v3:green:usb";
- gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
-
- wan {
- label = "tl-wr902ac-v3:green:wan";
- gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
- };
-
- wlan {
- label = "tl-wr902ac-v3:green:wlan";
- gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "tl-wr902ac-v3:green:wps";
- gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "i2s", "p0led_an", "p2led_an", "p4led_an", "uart1", "wdt", "wled_an";
- ralink,function = "gpio";
- };
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x28000>;
- ieee80211-freq-limit = <5000000 6000000>;
- mtd-mac-address = <&factory 0xf100>;
- mtd-mac-address-increment = <(-1)>;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "mt7628an.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "totolink,lr1200", "mediatek,mt7628dan";
- model = "TOTOLINK LR1200";
-
- aliases {
- led-boot = &led_sys;
- led-failsafe = &led_sys;
- led-running = &led_sys;
- led-upgrade = &led_sys;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_sys: sys {
- label = "lr1200:blue:sys";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
- sms {
- label = "lr1200:blue:sms";
- gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
- };
- wifi {
- label = "lr1200:blue:wifi";
- gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy0tpt";
- };
- 3g {
- label = "lr1200:blue:3g";
- gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
- };
- 4g {
- label = "lr1200:blue:4g";
- gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
- };
- rssi1 {
- label = "lr1200:blue:rssi1";
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- };
- rssi2 {
- label = "lr1200:blue:rssi2";
- gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
- };
- rssi3 {
- label = "lr1200:blue:rssi3";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- };
- rssi4 {
- label = "lr1200:blue:rssi4";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&gpio1 {
- gpio_modem_reset {
- gpio-hog;
- gpios = <13 GPIO_ACTIVE_HIGH>;
- output-high;
- line-name = "modem-reset";
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "gpio", "i2c", "i2s", "refclk", "uart1", "wdt", "wled_an";
- ralink,function = "gpio";
- };
- };
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
- };
-};
-
-&wmac {
- status = "okay";
- ralink,mtd-eeprom = <&factory 0x4>;
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <40000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-#include "mt7628an.dtsi"
-
-/ {
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-};
-
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "factory-uboot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "boot";
- reg = <0x30000 0x20000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "tplink,firmware";
- label = "firmware";
- reg = <0x50000 0x770000>;
- };
-
- partition@7c0000 {
- label = "config";
- reg = <0x7c0000 0x10000>;
- read-only;
- };
-
- rom: partition@7d0000 {
- label = "rom";
- reg = <0x7d0000 0x10000>;
- read-only;
- };
-
- partition@7e0000 {
- label = "romfile";
- reg = <0x7e0000 0x10000>;
- };
-
- radio: partition@7f0000 {
- label = "radio";
- reg = <0x7f0000 0x10000>;
- read-only;
- };
- };
- };
-};
-
-&ehci {
- status = "disabled";
-};
-
-&ohci {
- status = "disabled";
-};
-
-&wmac {
- status = "okay";
- mtd-mac-address = <&rom 0xf100>;
- mediatek,mtd-eeprom = <&radio 0x0>;
-};
-
-ðernet {
- mtd-mac-address = <&rom 0xf100>;
- mediatek,portmap = "llllw";
-};
+++ /dev/null
-#include "mt7628an.dtsi"
-
-/ {
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "boot";
- reg = <0x0 0x20000>;
- read-only;
- };
-
- partition@20000 {
- compatible = "tplink,firmware";
- label = "firmware";
- reg = <0x20000 0x7a0000>;
- };
-
- partition@7c0000 {
- label = "config";
- reg = <0x7c0000 0x10000>;
- read-only;
- };
-
- factory: partition@7d0000 {
- label = "factory";
- reg = <0x7d0000 0x30000>;
- read-only;
- };
- };
- };
-};
-
-&ehci {
- status = "disabled";
-};
-
-&ohci {
- status = "disabled";
-};
-
-&wmac {
- status = "okay";
- mtd-mac-address = <&factory 0xf100>;
- mediatek,mtd-eeprom = <&factory 0x20000>;
-};
-
-ðernet {
- mtd-mac-address = <&factory 0xf100>;
- mediatek,portmap = "llllw";
-};
+++ /dev/null
-/*
- * BSD LICENSE
- *
- * Copyright(c) 2017 Kristian Evensen <kristian.evensen@gmail.com>.
- * Copyright(c) 2017 Piotr Dymacz <pepe2k@gmail.com>.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Broadcom Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-#include "U7628-01.dtsi"
-
-/ {
- compatible = "unielec,u7628-01-128m-16m", "unielec,u7628-01", "mediatek,mt7628an-soc";
- model = "UniElec U7628-01 (128M RAM/16M flash)";
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x8000000>;
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <12000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "bootloader";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "config";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
- };
- };
-};
+++ /dev/null
-/*
- * BSD LICENSE
- *
- * Copyright(c) 2017 Kristian Evensen <kristian.evensen@gmail.com>.
- * Copyright(c) 2017 Piotr Dymacz <pepe2k@gmail.com>.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Broadcom Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include "mt7628an.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "unielec,u7628-01", "mediatek,mt7628an-soc";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
- reset {
- label = "reset";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "u7628-01:green:power";
- gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- };
-
- wlan {
- label = "u7628-01:green:wlan";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
-
- wan {
- label = "u7628-01:green:wan";
- gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
- };
-
- lan1 {
- label = "u7628-01:green:lan1";
- gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
- };
-
- lan2 {
- label = "u7628-01:green:lan2";
- gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
- };
-
- lan3 {
- label = "u7628-01:green:lan3";
- gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
- };
-
- lan4 {
- label = "u7628-01:green:lan4";
- gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
- };
-
- usb {
- label = "u7628-01:green:usb";
- gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
- };
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&pcie {
- status = "okay";
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&wmac {
- status = "okay";
- ralink,mtd-eeprom = <&factory 0x0>;
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "gpio", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "refclk", "wdt", "wled_an";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "mt7628an.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/{
- compatible = "glinet,vixmini", "mediatek,mt7628an-soc";
- model = "GL.iNet VIXMINI";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "vixmini:blue:power";
- default-state = "on";
- gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
- };
-
- wlan {
- label = "vixmini:white:wlan";
- gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy0tpt";
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "wdt", "wled_an", "p1led_an";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&wmac {
- status = "okay";
-
- ralink,mtd-eeprom = <&factory 0x0>;
-};
-
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "VOCORE2.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- compatible = "vocore,vocore2", "mediatek,mt7628an-soc";
- model = "VoCore2";
-
- aliases {
- led-boot = &led_status;
- led-failsafe = &led_status;
- led-running = &led_status;
- led-upgrade = &led_status;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_status: status {
- label = "vocore2:fuchsia:status";
- gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
- };
- };
-};
+++ /dev/null
-#include "mt7628an.dtsi"
-
-/ {
- compatible = "vocore,vocore2", "mediatek,mt7628an-soc";
-
- chosen {
- bootargs = "console=ttyS2,115200";
- };
-};
-
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "wled_an", "refclk", "wdt";
- ralink,function = "gpio";
- };
- };
-};
-
-&wmac {
- status = "okay";
- ralink,mtd-eeprom = <&factory 0x4>;
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&esw {
- mediatek,portmap = <0x7>;
- mediatek,portdisable = <0x3a>;
-};
-
-&i2s {
- status = "okay";
-};
-
-&gdma {
- status = "okay";
-};
-
-&pwm {
- status = "okay";
-};
-
-&uart1 {
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "VOCORE2.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- compatible = "vocore,vocore2-lite", "vocore,vocore2", "mediatek,mt7628an-soc";
- model = "VoCore2-Lite";
-
- aliases {
- led-boot = &led_status;
- led-failsafe = &led_status;
- led-running = &led_status;
- led-upgrade = &led_status;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_status: status {
- label = "vocore2lite:green:status";
- gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7628an.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "tama,w06", "mediatek,mt7628an-soc";
- model = "Tama W06";
-
- memory@0{
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- wps {
- label = "w06:green:wps";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
-
- wan {
- label = "w06:green:wan";
- gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
- };
-
- wireless {
- label = "w06:green:wlan";
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&ohci {
- status = "okay";
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "uart1", "p0led_an", "wdt";
- ralink,function = "gpio";
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xeb0000>;
- };
-
- partition@f00000 {
- label = "user-data";
- reg = <0xf00000 0x100000>;
- read-only;
- };
- };
- };
-};
-
-&wmac {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7628an.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "buffalo,wcr-1166ds", "mediatek,mt7628an-soc";
- model = "Buffalo WCR-1166DS";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- aoss {
- label = "aoss";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- ap {
- label = "ap";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- linux,input-type = <EV_SW>;
- };
-
- reset {
- label = "reset";
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- router_o {
- label = "wcr-1166ds:orange:router";
- gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
- };
-
- router_g {
- label = "wcr-1166ds:green:router";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- };
-
- internet_o {
- label = "wcr-1166ds:orange:internet";
- gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
- };
-
- internet_g {
- label = "wcr-1166ds:green:internet";
- gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
- };
-
- wireless_o {
- label = "wcr-1166ds:orange:wireless";
- gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
- };
-
- wireless_g {
- label = "wcr-1166ds:green:wireless";
- gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
- };
-
- diag {
- label = "wcr-1166ds:orange:diag";
- gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
- };
-
- led_power: power {
- label = "wcr-1166ds:green:power";
- gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&ehci {
- status = "disabled";
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
- mediatek,portdisable = <0x27>;
-};
-
-&ohci {
- status = "disabled";
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "uart1", "wled_an", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "wdt", "refclk", "gpio", "i2s";
- ralink,function = "gpio";
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "openwrt,trx";
- label = "firmware";
- reg = <0x50000 0x7c0000>;
- };
-
- partition@810000 {
- label = "firmware2";
- reg = <0x810000 0x7c0000>;
- };
-
- partition@fd0000 {
- label = "glbcfg";
- reg = <0xfd0000 0x10000>;
- read-only;
- };
-
- partition@fe0000 {
- label = "board_data";
- reg = <0xfe0000 0x10000>;
- read-only;
- };
- };
- };
-};
-
-&wmac {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "WIDORA-NEO.dtsi"
-
-/ {
- compatible = "widora,neo-16m", "widora,neo", "mediatek,mt7628an-soc";
- model = "Widora-NEO (16M)";
-};
-
-&spi0 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <40000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x0fb0000>;
- };
- };
- };
-
- spidev@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "linux,spidev";
- reg = <1>;
- spi-max-frequency = <40000000>;
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "WIDORA-NEO.dtsi"
-
-/ {
- compatible = "widora,neo-32m", "widora,neo", "mediatek,mt7628an-soc";
- model = "Widora-NEO (32M)";
-};
-
-&spi0 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <40000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x1fb0000>;
- };
- };
- };
-
- spidev@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "linux,spidev";
- reg = <1>;
- spi-max-frequency = <40000000>;
- };
-};
+++ /dev/null
-#include "mt7628an.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "widora,neo", "mediatek,mt7628an-soc";
-
- aliases {
- led-boot = &led_wifi;
- led-failsafe = &led_wifi;
- led-running = &led_wifi;
- led-upgrade = &led_wifi;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x8000000>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_wifi: wifi {
- label = "widora:orange:wifi";
- gpios = <&wgpio 0 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- wps {
- label = "reset";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- wgpio: gpio-wifi {
- compatible = "mediatek,gpio-wifi";
- #address-cells = <1>;
- #size-cells = <0>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "gpio";
- ralink,function = "gpio";
- };
-
- perst {
- ralink,group = "perst";
- ralink,function = "gpio";
- };
-
- refclk {
- ralink,group = "refclk";
- ralink,function = "gpio";
- };
-
- i2s {
- ralink,group = "i2s";
- ralink,function = "gpio";
- };
-
- spis {
- ralink,group = "spis";
- ralink,function = "gpio";
- };
-
- wled_kn {
- ralink,group = "wled_kn";
- ralink,function = "gpio";
- };
-
- wled_an {
- ralink,group = "wled_an";
- ralink,function = "wled_an";
- };
-
- wdt {
- ralink,group = "wdt";
- ralink,function = "gpio";
- };
- };
-};
-
-&i2c {
- status = "okay";
-};
-
-&uart1 {
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-&pwm {
- status = "okay";
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&sdhci {
- status = "okay";
- mediatek,cd-low;
-};
-
-&wmac {
- status = "okay";
-};
+++ /dev/null
-//SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "mt7628an.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "wiznet,wizfi630s", "mediatek,mt7628an-soc";
- model = "WIZnet WizFi630S";
-
- chosen {
- bootargs = "console=ttyS1,115200";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x8000000>;
- };
-
- aliases {
- led-boot = &led_run;
- led-failsafe = &led_run;
- led-running = &led_run;
- led-upgrade = &led_run;
- serial0 = &uart1;
- serial1 = &uartlite;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_run: run {
- label = "wizfi630s:green:run";
- gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
- };
-
- ledwps {
- label = "wizfi630s:green:wps";
- gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
- };
-
- leduart1 {
- label = "wizfi630s:green:uart1";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- };
-
- leduart2 {
- label = "wizfi630s:green:uart2";
- gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- scm1 {
- label = "SCM1";
- gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_1>;
- };
-
- scm2 {
- label = "SCM2";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_2>;
- };
-
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "gpio";
- ralink,function = "gpio";
- };
-
- i2s {
- ralink,group = "i2s";
- ralink,function = "gpio";
- };
-
- wdt {
- ralink,group = "wdt";
- ralink,function = "gpio";
- };
-
-
- i2c {
- ralink,group = "i2c";
- ralink,function = "gpio";
- };
-
- refclk {
- ralink,group = "refclk";
- ralink,function = "gpio";
- };
- };
-};
-
-&wmac {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <40000000>;
- m25p,chunked-io = <31>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x1fb0000>;
- };
- };
- };
-};
-
-&i2c {
- status = "okay";
-};
-
-&uart1 {
- status = "okay";
-};
-
-&pwm {
- status = "okay";
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&esw {
- mediatek,portmap = <0x3e>;
-};
-
-&sdhci {
- status = "okay";
- mediatek,cd-high;
-};
-
-&wmac {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-#include "mt7628an.dtsi"
-
-/ {
- compatible = "wavlink,wl-wn570ha1", "mediatek,mt7628an-soc";
- model = "Wavlink WL-WN570HA1";
-
- chosen {
- bootargs = "console=ttyS0,57600";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- power {
- label = "wl-wn570ha1:green:power";
- gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
-
- wan {
- label = "wl-wn570ha1:green:wan";
- gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
- };
-
- wifi-high {
- label = "wl-wn570ha1:green:wifi-high";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
-
- wifi-med {
- label = "wl-wn570ha1:green:wifi-med";
- gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
- };
-
- wifi-low {
- label = "wl-wn570ha1:green:wifi-low";
- gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
- };
-
- wifi {
- label = "wl-wn570ha1:green:wifi";
- gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "wled_an", "p0led_an", "wdt", "refclk";
- ralink,function = "gpio";
- };
- };
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- wifi@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
- };
-};
-
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&wmac {
- status = "okay";
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x2e>;
- mediatek,portmap = "llllw";
-};
+++ /dev/null
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-#include "mt7628an.dtsi"
-
-/ {
- compatible = "wavlink,wl-wn575a3", "mediatek,mt7628an-soc";
- model = "Wavlink WL-WN575A3";
-
- chosen {
- bootargs = "console=ttyS0,57600";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- wifi-high {
- label = "wl-wn575a3:green:wifi-high";
- gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
- };
-
- wifi-med {
- label = "wl-wn575a3:green:wifi-med";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
-
- wifi-low {
- label = "wl-wn575a3:green:wifi-low";
- gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "wl-wn575a3:green:wps";
- gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "wled_an", "gpio", "refclk", "wdt", "p0led_an";
- ralink,function = "gpio";
- };
- };
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
- };
-};
-
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&wmac {
- status = "okay";
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
- mediatek,portmap = "llllw";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "mt7628an.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "cudy,wr1000", "mediatek,mt7628an-soc";
- model = "Cudy WR1000";
-
- aliases {
- led-boot = &led_wps;
- led-failsafe = &led_wps;
- led-upgrade = &led_wps;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "rfkill";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- lan1 {
- label = "wr1000:blue:lan1";
- gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
- };
-
- lan2 {
- label = "wr1000:blue:lan2";
- gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
- };
-
- wan {
- label = "wr1000:blue:wan";
- gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
- };
-
- wlan2g {
- label = "wr1000:blue:wlan2g";
- gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy0tpt";
- };
-
- led_wps: wps {
- label = "wr1000:blue:wps";
- gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
-
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2s", "refclk", "wdt", "p4led_an",
- "p3led_an", "p2led_an", "wled_an";
- ralink,function = "gpio";
- };
- };
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- wifi@0,0 {
- compatible = "mediatek,mt76";
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
-
- led {
- led-sources = <2>;
- led-active-low;
- };
- };
-};
-
-&wmac {
- status = "okay";
- ralink,mtd-eeprom = <&factory 0x4>;
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x2e>;
- mediatek,portmap = "llllw";
-};
+++ /dev/null
-#include "mt7628an.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "wrtnode,wrtnode2", "mediatek,mt7628an-soc";
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x1fb0000>;
- };
- };
- };
-
- spidev@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "linux,spidev";
- reg = <1>;
- spi-max-frequency = <10000000>;
- };
-};
-
-&uart1 {
- status = "okay";
-};
-
-&i2c {
- status = "okay";
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "llllw";
-};
-
-&sdhci {
- status = "okay";
-};
-
-&pcie {
- status = "okay";
-};
-
-&wmac {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "WRTNODE2.dtsi"
-
-/ {
- compatible = "wrtnode,wrtnode2p", "wrtnode,wrtnode2", "mediatek,mt7628an-soc";
- model = "WRTnode2P";
-
- aliases {
- led-boot = &led_indicator;
- led-failsafe = &led_indicator;
- led-running = &led_indicator;
- led-upgrade = &led_indicator;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_indicator: indicator {
- label = "wrtnode:blue:indicator";
- gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "gpio";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "WRTNODE2.dtsi"
-
-/ {
- compatible = "wrtnode,wrtnode2r", "wrtnode,wrtnode2", "mediatek,mt7628an-soc";
- model = "WRTnode2R";
-
- aliases {
- led-boot = &led_indicator;
- led-failsafe = &led_indicator;
- led-running = &led_indicator;
- led-upgrade = &led_indicator;
- };
-
- leds {
- compatible = "gpio-leds";
-
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins>;
-
- led_indicator: indicator {
- label = "wrtnode:blue:indicator";
- gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "gpio";
- ralink,function = "gpio";
- };
- };
-
- led_pins: led {
- gpio {
- ralink,group = "wled_an";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-//SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "mt7628an.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "xiaomi,mir4a-100m", "mediatek,mt7628an-soc";
- model = "Xiaomi Mi Router 4A (100M Edition)";
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- aliases {
- led-boot = &power_yellow;
- led-failsafe = &power_yellow;
- led-running = &power_blue;
- led-upgrade = &power_yellow;
- };
-
- leds {
- compatible = "gpio-leds";
-
- power_blue: power_blue {
- label = "mir4a-100m:blue:power";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
-
- power_yellow: power_yellow {
- label = "mir4a-100m:yellow:power";
- gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "bootloader";
- reg = <0x0 0x20000>;
- read-only;
- };
-
- partition@20000 {
- label = "config";
- reg = <0x20000 0x10000>;
- read-only;
- };
-
- factory: partition@30000 {
- label = "factory";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- partition@40000 {
- label = "crash";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "cfg_bak";
- reg = <0x50000 0x10000>;
- read-only;
- };
-
- partition@60000 {
- label = "overlay";
- reg = <0x60000 0x100000>;
- read-only;
- };
-
- partition@160000 {
- label = "firmware";
- reg = <0x160000 0xea0000>;
- compatible = "denx,uimage";
- };
- };
- };
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- wifi@0,0 {
- compatible = "mediatek,mt76";
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "gpio", "wdt", "wled_an";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
- mtd-mac-address-increment = <(-1)>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
- mediatek,portdisable = <0x2a>;
-};
-
-&wmac {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-#include "mt7628an.dtsi"
-
-/ {
- compatible = "zbtlink,zbt-we1226", "mediatek,mt7628an-soc";
- model = "Zbtlink ZBT-WE1226";
-
- aliases {
- led-boot = &led_wlan;
- led-failsafe = &led_wlan;
- led-running = &led_wlan;
- led-upgrade = &led_wlan;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- wan {
- label = "zbt-we1226:green:wan";
- gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
- };
-
- lan1 {
- label = "zbt-we1226:green:lan1";
- gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
- };
-
- lan2 {
- label = "zbt-we1226:green:lan2";
- gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
- };
-
- led_wlan: wlan {
- label = "zbt-we1226:green:wlan";
- gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "p0led_an", "p1led_an", "p4led_an", "wdt", "wled_an";
- ralink,function = "gpio";
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&wmac {
- status = "okay";
- ralink,mtd-eeprom = <&factory 0x4>;
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x2e>;
- mediatek,portmap = "llllw";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7628an.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "zyxel,keenetic-extra-ii", "mediatek,mt7628an-soc";
- model = "ZyXEL Keenetic Extra II";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x8000000>;
- };
-
- chosen {
- bootargs = "console=ttyS0,57600n8";
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- fn {
- label = "fn";
- gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "keenetic-extra-ii:green:power";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
-
- internet {
- label = "keenetic-extra-ii:green:internet";
- gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- };
-
- wifi {
- label = "keenetic-extra-ii:green:wifi";
- gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
- };
-
- usb {
- label = "keenetic-extra-ii:green:usb";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
- };
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- usbpower {
- gpio-export,name = "usbpower";
- gpio-export,output = <1>;
- gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-config";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "rf-eeprom";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xe90000>;
- };
-
- partition@ee0000 {
- label = "config_1";
- reg = <0xee0000 0x10000>;
- read-only;
- };
-
- partition@ef0000 {
- label = "storage";
- reg = <0xef0000 0x100000>;
- read-only;
- };
-
- partition@ff0000 {
- label = "dump";
- reg = <0xff0000 0x10000>;
- read-only;
- };
-
- partition@1000000 {
- label = "u-state";
- reg = <0x1000000 0x30000>;
- read-only;
- };
-
- partition@1030000 {
- label = "u-config_res";
- reg = <0x1030000 0x10000>;
- read-only;
- };
-
- partition@1040000 {
- label = "rf-eeprom_res";
- reg = <0x1040000 0x10000>;
- read-only;
- };
-
- partition@1050000 {
- label = "firmware_2";
- reg = <0x1050000 0xe90000>;
- read-only;
- };
-
- partition@1ee0000 {
- label = "config_2";
- reg = <0x1ee0000 0x10000>;
- read-only;
- };
- };
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "wllll";
-};
-
-&wmac {
- status = "okay";
- mediatek,mtd-eeprom = <&factory 0x0>;
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
- mtd-mac-address = <&factory 0x8004>;
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "gpio", "i2s", "refclk", "spi cs1", "uart1", "wled_an";
- ralink,function = "gpio";
- };
- };
-};
--- /dev/null
+/*
+ * BSD LICENSE
+ *
+ * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the names of the copyright holders nor the names of any
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "alfa-network,awusfree1", "mediatek,mt7628an-soc";
+ model = "ALFA Network AWUSFREE1";
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "awusfree1:orange:system";
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "awusfree1:blue:wlan";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+};
+
+&ehci {
+ status = "disabled";
+};
+
+&esw {
+ mediatek,portdisable = <0x1e>;
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x2e>;
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&ohci {
+ status = "disabled";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "p0led_an", "wdt", "wled_an";
+ ralink,function = "gpio";
+ };
+
+ ext_lna {
+ ralink,group = "uart1";
+ ralink,function = "sw_r";
+ };
+
+ ext_pa {
+ ralink,group = "i2s";
+ ralink,function = "antenna";
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x1000>;
+ };
+
+ partition@31000 {
+ label = "config";
+ reg = <0x31000 0xf000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+ mediatek,mtd-eeprom = <&factory 0x0>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "buffalo,wcr-1166ds", "mediatek,mt7628an-soc";
+ model = "Buffalo WCR-1166DS";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ aoss {
+ label = "aoss";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ ap {
+ label = "ap";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ router_o {
+ label = "wcr-1166ds:orange:router";
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ };
+
+ router_g {
+ label = "wcr-1166ds:green:router";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ };
+
+ internet_o {
+ label = "wcr-1166ds:orange:internet";
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ };
+
+ internet_g {
+ label = "wcr-1166ds:green:internet";
+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ };
+
+ wireless_o {
+ label = "wcr-1166ds:orange:wireless";
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ };
+
+ wireless_g {
+ label = "wcr-1166ds:green:wireless";
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ };
+
+ diag {
+ label = "wcr-1166ds:orange:diag";
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power: power {
+ label = "wcr-1166ds:green:power";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&ehci {
+ status = "disabled";
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+ mediatek,portdisable = <0x27>;
+};
+
+&ohci {
+ status = "disabled";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "uart1", "wled_an", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "wdt", "refclk", "gpio", "i2s";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "openwrt,trx";
+ label = "firmware";
+ reg = <0x50000 0x7c0000>;
+ };
+
+ partition@810000 {
+ label = "firmware2";
+ reg = <0x810000 0x7c0000>;
+ };
+
+ partition@fd0000 {
+ label = "glbcfg";
+ reg = <0xfd0000 0x10000>;
+ read-only;
+ };
+
+ partition@fe0000 {
+ label = "board_data";
+ reg = <0xfe0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "cudy,wr1000", "mediatek,mt7628an-soc";
+ model = "Cudy WR1000";
+
+ aliases {
+ led-boot = &led_wps;
+ led-failsafe = &led_wps;
+ led-upgrade = &led_wps;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "rfkill";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ lan1 {
+ label = "wr1000:blue:lan1";
+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2 {
+ label = "wr1000:blue:lan2";
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "wr1000:blue:wan";
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2g {
+ label = "wr1000:blue:wlan2g";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ led_wps: wps {
+ label = "wr1000:blue:wps";
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2s", "refclk", "wdt", "p4led_an",
+ "p3led_an", "p2led_an", "wled_an";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+
+ led {
+ led-sources = <2>;
+ led-active-low;
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+ ralink,mtd-eeprom = <&factory 0x4>;
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x2e>;
+ mediatek,portmap = "llllw";
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "d-team,pbr-d1", "mediatek,mt7628an-soc";
+ model = "PBR-D1";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ aliases {
+ serial0 = &uart2;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ usb {
+ label = "pbr-d1:orange:usb";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ led_power: power {
+ label = "pbr-d1:orange:power";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 38 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ wgpio: gpio-wifi {
+ compatible = "mediatek,gpio-wifi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "gpio";
+ ralink,function = "gpio";
+ };
+
+ i2c {
+ ralink,group = "i2c";
+ ralink,function = "gpio";
+ };
+
+ i2s {
+ ralink,group = "i2s";
+ ralink,function = "gpio";
+ };
+
+ spis {
+ ralink,group = "spis";
+ ralink,function = "gpio";
+ };
+
+ wdt {
+ ralink,group = "wdt";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x0fb0000>;
+ };
+ };
+ };
+
+ spidev@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "linux,spidev";
+ reg = <1>;
+ spi-max-frequency = <40000000>;
+ };
+};
+
+&i2c {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&pwm {
+ status = "okay";
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&sdhci {
+ status = "okay";
+ mediatek,cd-high;
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "duzun,dm06", "mediatek,mt7628an-soc";
+ model = "DuZun DM06";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "Audio-I2S";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&dailink0_master>;
+ simple-audio-card,frame-master = <&dailink0_master>;
+ simple-audio-card,widgets =
+ "Headphone", "Headphones";
+ simple-audio-card,routing =
+ "Headphones", "HP_L",
+ "Headphones", "HP_R";
+ simple-audio-card,mclk-fs = <256>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s>;
+ };
+
+ dailink0_master: simple-audio-card,codec {
+ sound-dai = <&codec>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "wdt", "uart1";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&i2c {
+ status = "okay";
+
+ codec: wm8960@1a {
+ #sound-dai-cells = <0>;
+ compatible = "wlf,wm8960";
+ reg = <0x1a>;
+
+ wlf,shared-lrclk;
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x3>;
+ mediatek,portdisable = <0x3c>;
+};
+
+&i2s {
+ #sound-dai-cells = <0>;
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s_pins>, <&refclk_pins>;
+};
+
+&sdhci {
+ status = "okay";
+};
+
+&gdma {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <60000000>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/{
+ compatible = "glinet,gl-mt300n-v2", "mediatek,mt7628an-soc";
+ model = "GL-MT300N-V2";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "gl-mt300n-v2:green:power";
+ default-state = "on";
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "gl-mt300n-v2:green:wan";
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "gl-mt300n-v2:red:wlan";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ BTN_0 {
+ label = "BTN_0";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ BTN_1 {
+ label = "BTN_1";
+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ usb {
+ gpio-export,name = "usb";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "wdt", "gpio", "wled_an", "p0led_an", "p1led_an", "i2s";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&wmac {
+ status = "okay";
+ ralink,mtd-eeprom = <&factory 0x0>;
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+ };
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/{
+ compatible = "glinet,vixmini", "mediatek,mt7628an-soc";
+ model = "GL.iNet VIXMINI";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "vixmini:blue:power";
+ default-state = "on";
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "vixmini:white:wlan";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "wdt", "wled_an", "p1led_an";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&wmac {
+ status = "okay";
+
+ ralink,mtd-eeprom = <&factory 0x0>;
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "hilink,hlk-7628n", "mediatek,mt7628an-soc";
+ model = "HILINK HLK-7628N";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "hlk-7628n:green:wlan";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x1fb0000>;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+};
+
--- /dev/null
+/dts-v1/;
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "hiwifi,hc5661a", "mediatek,mt7628an-soc";
+ model = "HiWiFi HC5661A";
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "hc5661a:blue:system";
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ };
+ internet {
+ label = "hc5661a:blue:internet";
+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ };
+ wlan2g {
+ label = "hc5661a:blue:wlan2g";
+ gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "refclk", "wled_an";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ linux,modalias = "m25p80", "w25q128";
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "hw_panic";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xf70000>;
+ };
+
+ partition@fc0000 {
+ label = "oem";
+ reg = <0xfc0000 0x20000>;
+ read-only;
+ };
+
+ bdinfo: partition@fe0000 {
+ label = "bdinfo";
+ reg = <0xfe0000 0x10000>;
+ read-only;
+ };
+
+ partition@ff0000 {
+ label = "backup";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "wllll";
+};
+
+&wmac {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "hiwifi,hc5861b", "mediatek,mt7628an-soc";
+ model = "HiWiFi HC5861B";
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "hc5861b:green:system";
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ };
+ wlan2g {
+ label = "hc5861b:green:wlan2g";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "refclk", "wdt", "wled_an";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "hw_panic";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xf70000>;
+ };
+
+ partition@fc0000 {
+ label = "oem";
+ reg = <0xfc0000 0x20000>;
+ read-only;
+ };
+
+ bdinfo: partition@fe0000 {
+ label = "bdinfo";
+ reg = <0xfe0000 0x10000>;
+ read-only;
+ };
+
+ partition@ff0000 {
+ label = "backup";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&wmac {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ mtd-mac-address = <&factory 0x2e>;
+ ieee80211-freq-limit = <5000000 6000000>;
+
+ led {
+ led-sources = <2>;
+ led-active-low;
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "mediatek,linkit-smart-7688", "mediatek,mt7628an-soc";
+ model = "MediaTek LinkIt Smart 7688";
+
+ aliases {
+ led-boot = &led_wifi;
+ led-failsafe = &led_wifi;
+ led-running = &led_wifi;
+ led-upgrade = &led_wifi;
+ };
+
+ chosen {
+ bootargs = "console=ttyS2,57600";
+ };
+
+ aliases {
+ serial0 = &uart2;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ bootstrap {
+ compatible = "mediatek,linkit";
+
+ status = "okay";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_wifi: wifi {
+ label = "linkit-smart-7688:orange:wifi";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ wps {
+ label = "reset";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "gpio";
+ ralink,function = "gpio";
+ };
+
+ refclk {
+ ralink,group = "refclk";
+ ralink,function = "gpio";
+ };
+
+ i2s {
+ ralink,group = "i2s";
+ ralink,function = "gpio";
+ };
+
+ spis {
+ ralink,group = "spis";
+ ralink,function = "gpio";
+ };
+
+ wled_an {
+ ralink,group = "wled_an";
+ ralink,function = "gpio";
+ };
+
+ wdt {
+ ralink,group = "wdt";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x1fb0000>;
+ };
+ };
+ };
+
+ spidev@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "linux,spidev";
+ reg = <1>;
+ spi-max-frequency = <40000000>;
+ };
+};
+
+&i2c {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&pwm {
+ status = "okay";
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&sdhci {
+ status = "okay";
+ mediatek,cd-high;
+};
+
+&wmac {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7628an.dtsi"
+
+/ {
+ compatible = "mediatek,mt7628an-eval-board", "mediatek,mt7628an-soc";
+ model = "Mediatek MT7628AN evaluation board";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x2000000>;
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "mercury,mac1200r-v2", "mediatek,mt7628an-soc";
+ model = "Mercury MAC1200R v2";
+
+ aliases {
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x2000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led_status: status {
+ label = "mac1200rv2:green:status";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x1d800>;
+ };
+
+ factory: partition@1d800 {
+ label = "factory_info";
+ reg = <0x1d800 0x800>;
+ read-only;
+ };
+
+ art: partition@1e000 {
+ label = "art";
+ reg = <0x1e000 0x2000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "config";
+ reg = <0x20000 0x10000>;
+ };
+
+ partition@30000 {
+ label = "u-boot2";
+ reg = <0x30000 0x10000>;
+ };
+
+ partition@40000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x40000 0x7c0000>;
+ };
+ };
+ };
+};
+
+ðernet {
+ pinctrl-names = "default";
+ mtd-mac-address = <&factory 0xd>;
+ mediatek,portmap = "llllw";
+};
+
+&wmac {
+ status = "okay";
+ ralink,mtd-eeprom = <&art 0x0>;
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&art 0x1000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "netgear,r6120", "mediatek,mt7628an-soc";
+ model = "Netgear R6120";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ lan {
+ label = "r6120:green:lan";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power: power {
+ label = "r6120:green:power";
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "r6120:green:wlan2g";
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan_orange {
+ label = "r6120:orange:wlan2g";
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "r6120:green:wan";
+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_orange {
+ label = "r6120:orange:wan";
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ usb-regulator {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB-power";
+ gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+
+ regulator-always-on;
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "p0led_an", "p1led_an", "p2led_an",
+ "p3led_an", "p4led_an", "wdt",
+ "wled_an", "uart1";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x20000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "nvram";
+ reg = <0x60000 0x30000>;
+ read-only;
+ };
+
+ partition@90000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x90000 0xf60000>;
+ };
+
+ partition@ff0000 {
+ label = "reserved";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,mtd-eeprom = <&factory 0x0>;
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ mtd-mac-address = <&factory 0x4>;
+ mtd-mac-address-increment = <(2)>;
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7628an_onion_omega2.dtsi"
+
+/ {
+ compatible = "onion,omega2", "mediatek,mt7628an-soc";
+ model = "Onion Omega2";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+};
+
+&firmware {
+ reg = <0x50000 0xfb0000>;
+};
+
+&system_led {
+ label = "omega2:amber:system";
+};
--- /dev/null
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "onion,omega2", "mediatek,mt7628an-soc";
+
+ aliases {
+ led-boot = &system_led;
+ led-failsafe = &system_led;
+ led-running = &system_led;
+ led-upgrade = &system_led;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ system_led: system {
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "gpio";
+ ralink,function = "gpio";
+ };
+
+ perst {
+ ralink,group = "perst";
+ ralink,function = "gpio";
+ };
+
+ refclk {
+ ralink,group = "refclk";
+ ralink,function = "gpio";
+ };
+
+ i2s {
+ ralink,group = "i2s";
+ ralink,function = "gpio";
+ };
+
+ spis {
+ ralink,group = "spis";
+ ralink,function = "gpio";
+ };
+
+ wled_kn {
+ ralink,group = "wled_kn";
+ ralink,function = "gpio";
+ };
+
+ wled_an {
+ ralink,group = "wled_an";
+ ralink,function = "gpio";
+ };
+
+ wdt {
+ ralink,group = "wdt";
+ ralink,function = "gpio";
+ };
+
+ pwm0 {
+ ralink,group = "pwm0";
+ ralink,function = "gpio";
+ };
+
+ pwm1 {
+ ralink,group = "pwm1";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ firmware: partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ };
+ };
+ };
+
+ spidev@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "linux,spidev";
+ reg = <1>;
+ spi-max-frequency = <40000000>;
+ };
+};
+
+&i2c {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&sdhci {
+ status = "okay";
+ mediatek,cd-low;
+};
+
+&wmac {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7628an_onion_omega2.dtsi"
+
+/ {
+ compatible = "onion,omega2p", "onion,omega2", "mediatek,mt7628an-soc";
+ model = "Onion Omega2+";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+};
+
+&firmware {
+ reg = <0x50000 0x1fb0000>;
+};
+
+&system_led {
+ label = "omega2p:amber:system";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "rakwireless,rak633", "mediatek,mt7628an-soc";
+ model = "Rakwireless RAK633";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wifi {
+ label = "rak633:blue:wifi";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ wled_an {
+ ralink,group = "wled_an";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&i2c {
+ status = "okay";
+};
+
+&i2s {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&gdma {
+ status = "okay";
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&wmac {
+ status = "okay";
+ ralink,mtd-eeprom = <&factory 0x4>;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/{
+ compatible = "skylab,skw92a", "mediatek,mt7628an-soc";
+ model = "SKYLAB SKW92A";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: wps {
+ label = "skw92a:green:wps";
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "skw92a:green:wlan";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "wdt", "refclk", "wled_an";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&wmac {
+ status = "okay";
+ ralink,mtd-eeprom = <&factory 0x0>;
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ compatible = "denx,uimage";
+ };
+ };
+ };
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tama,w06", "mediatek,mt7628an-soc";
+ model = "Tama W06";
+
+ memory@0{
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wps {
+ label = "w06:green:wps";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "w06:green:wan";
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wireless {
+ label = "w06:green:wlan";
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&ohci {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "uart1", "p0led_an", "wdt";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xeb0000>;
+ };
+
+ partition@f00000 {
+ label = "user-data";
+ reg = <0xf00000 0x100000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "totolink,lr1200", "mediatek,mt7628dan";
+ model = "TOTOLINK LR1200";
+
+ aliases {
+ led-boot = &led_sys;
+ led-failsafe = &led_sys;
+ led-running = &led_sys;
+ led-upgrade = &led_sys;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_sys: sys {
+ label = "lr1200:blue:sys";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+ sms {
+ label = "lr1200:blue:sms";
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ };
+ wifi {
+ label = "lr1200:blue:wifi";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ 3g {
+ label = "lr1200:blue:3g";
+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+ };
+ 4g {
+ label = "lr1200:blue:4g";
+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ };
+ rssi1 {
+ label = "lr1200:blue:rssi1";
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ };
+ rssi2 {
+ label = "lr1200:blue:rssi2";
+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ };
+ rssi3 {
+ label = "lr1200:blue:rssi3";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ };
+ rssi4 {
+ label = "lr1200:blue:rssi4";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&gpio1 {
+ gpio_modem_reset {
+ gpio-hog;
+ gpios = <13 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "modem-reset";
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "gpio", "i2c", "i2s", "refclk", "uart1", "wdt", "wled_an";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
+
+&wmac {
+ status = "okay";
+ ralink,mtd-eeprom = <&factory 0x4>;
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include "mt7628an.dtsi"
+
+/ {
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "factory-uboot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "boot";
+ reg = <0x30000 0x20000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x50000 0x770000>;
+ };
+
+ partition@7c0000 {
+ label = "config";
+ reg = <0x7c0000 0x10000>;
+ read-only;
+ };
+
+ rom: partition@7d0000 {
+ label = "rom";
+ reg = <0x7d0000 0x10000>;
+ read-only;
+ };
+
+ partition@7e0000 {
+ label = "romfile";
+ reg = <0x7e0000 0x10000>;
+ };
+
+ radio: partition@7f0000 {
+ label = "radio";
+ reg = <0x7f0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&ehci {
+ status = "disabled";
+};
+
+&ohci {
+ status = "disabled";
+};
+
+&wmac {
+ status = "okay";
+ mtd-mac-address = <&rom 0xf100>;
+ mediatek,mtd-eeprom = <&radio 0x0>;
+};
+
+ðernet {
+ mtd-mac-address = <&rom 0xf100>;
+ mediatek,portmap = "llllw";
+};
--- /dev/null
+#include "mt7628an.dtsi"
+
+/ {
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "boot";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x20000 0x7a0000>;
+ };
+
+ partition@7c0000 {
+ label = "config";
+ reg = <0x7c0000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@7d0000 {
+ label = "factory";
+ reg = <0x7d0000 0x30000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&ehci {
+ status = "disabled";
+};
+
+&ohci {
+ status = "disabled";
+};
+
+&wmac {
+ status = "okay";
+ mtd-mac-address = <&factory 0xf100>;
+ mediatek,mtd-eeprom = <&factory 0x20000>;
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0xf100>;
+ mediatek,portmap = "llllw";
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7628an_tplink_8m.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "tplink,archer-c20-v4", "mediatek,mt7628an-soc";
+ model = "TP-Link Archer C20 v4";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ lan {
+ label = "c20-v4:green:lan";
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power: power {
+ label = "c20-v4:green:power";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "c20-v4:green:wan";
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_orange {
+ label = "c20-v4:orange:wan";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan5g {
+ label = "c20-v4:green:wlan5g";
+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2g {
+ label = "c20-v4:green:wlan2g";
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "c20-v4:green:wps";
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ rfkill {
+ label = "rfkill";
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+ };
+};
+
+&wmac {
+ mtd-mac-address-increment = <(-2)>;
+};
+
+ðernet {
+ mediatek,portmap = "wllll";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2s", "refclk", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "wdt";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x28000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ mtd-mac-address = <&factory 0xf100>;
+ mtd-mac-address-increment = <(-1)>;
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7628an_tplink_8m.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tplink,archer-c50-v3", "mediatek,mt7628an-soc";
+ model = "TP-Link Archer C50 v3";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ rfkill {
+ label = "rfkill";
+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ lan {
+ label = "c50-v3:green:lan";
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power: power {
+ label = "c50-v3:green:power";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "c50-v3:green:wan";
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_orange {
+ label = "c50-v3:orange:wan";
+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "c50-v3:green:wlan2g";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan5 {
+ label = "c50-v3:green:wlan5g";
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "c50-v3:green:wps";
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "gpio", "p0led_an", "p1led_an", "p2led_an",
+ "p3led_an", "p4led_an", "wdt", "wled_an";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x28000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ mtd-mac-address = <&factory 0xf100>;
+ mtd-mac-address-increment = <(-1)>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7628an_tplink_8m-split-uboot.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tplink,archer-c50-v4", "mediatek,mt7628an-soc";
+ model = "TP-Link Archer C50 v4";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ rfkill {
+ label = "rfkill";
+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "c50-v4:green:power";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2 {
+ label = "c50-v4:green:wlan2g";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan5 {
+ label = "c50-v4:green:wlan5g";
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "c50-v4:green:lan";
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "c50-v4:green:wan";
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_orange {
+ label = "c50-v4:orange:wan";
+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "c50-v4:green:wps";
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "p0led_an", "p1led_an", "p2led_an",
+ "p3led_an", "p4led_an", "wdt", "wled_an";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&radio 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ mtd-mac-address = <&rom 0xf100>;
+ mtd-mac-address-increment = <(-1)>;
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tplink,tl-mr3020-v3", "mediatek,mt7628an-soc";
+ model = "TP-Link TL-MR3020 v3";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ wps {
+ label = "wps";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ modec1 {
+ label = "sw1";
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ modec2 {
+ label = "sw2";
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "tl-mr3020-v3:green:power";
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wan {
+ label = "tl-mr3020-v3:green:3g";
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ehci_port1>, <&ohci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ wlan {
+ label = "tl-mr3020-v3:green:wlan";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "tl-mr3020-v3:green:wps";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "tl-mr3020-v3:green:lan";
+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "boot";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x20000 0x7a0000>;
+ };
+
+ partition@7c0000 {
+ label = "config";
+ reg = <0x7c0000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@7d0000 {
+ label = "factory";
+ reg = <0x7d0000 0x30000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2s", "refclk", "wdt", "p2led_an", "p1led_an", "p0led_an", "wled_an";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+ mtd-mac-address = <&factory 0xf100>;
+ mediatek,mtd-eeprom = <&factory 0x20000>;
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0xf100>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7628an_tplink_8m.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tplink,tl-mr3420-v5", "mediatek,mt7628an-soc";
+ model = "TP-Link TL-MR3420 v5";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ rfkill {
+ label = "rfkill";
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ lan {
+ label = "tl-mr3420-v5:green:lan";
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power: power {
+ label = "tl-mr3420-v5:green:power";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "tl-mr3420-v5:green:usb";
+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ wan {
+ label = "tl-mr3420-v5:green:wan";
+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_amber {
+ label = "tl-mr3420-v5:amber:wan";
+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "tl-mr3420-v5:green:wlan";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "tl-mr3420-v5:green:wps";
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "i2s", "p2led_an", "refclk", "uart1", "wdt", "wled_an";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7628an_tplink_8m.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tplink,tl-wa801nd-v5", "mediatek,mt7628an-soc";
+ model = "TP-Link TL-WA801ND v5";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "tl-wa801nd-v5:green:power";
+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "tl-wa801nd-v5:green:lan";
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "tl-wa801nd-v5:green:wlan";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "tl-wa801nd-v5:orange:wps";
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "p0led_an", "perst", "refclk", "wdt", "wled_an";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7628an_tplink_8m.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tplink,tl-wr802n-v4", "mediatek,mt7628an-soc";
+ model = "TP-Link TL-WR802N v4";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "tl-wr802n-v4:green:power";
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "refclk", "wdt";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0xf100>;
+ mediatek,portmap = "l";
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7628an_tplink_8m.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tplink,tl-wr840n-v4", "mediatek,mt7628an-soc";
+ model = "TP-Link TL-WR840N v4";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ lan {
+ label = "tl-wr840n-v4:green:lan";
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power: power {
+ label = "tl-wr840n-v4:green:power";
+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "tl-wr840n-v4:green:wan";
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "tl-wr840n-v4:green:wlan";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "tl-wr840n-v4:green:wps";
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "p0led_an", "p2led_an", "perst", "refclk", "wdt", "wled_an";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tplink,tl-wr840n-v5", "mediatek,mt7628an-soc";
+ model = "TP-Link TL-WR840N v5";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_green;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_green;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+ /* LED used is dual-color,dual lead LED */
+ leds {
+ compatible = "gpio-leds";
+
+ led_power_green: power {
+ label = "tl-wr840n-v5:green:power";
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ };
+
+ orange {
+ label = "tl-wr840n-v5:orange:power";
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "boot";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x20000 0x3d0000>;
+ };
+
+ factory: partition@3f0000 {
+ label = "factory";
+ reg = <0x3f0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&ehci {
+ status = "disabled";
+};
+
+&ohci {
+ status = "disabled";
+};
+
+&wmac {
+ status = "okay";
+ mtd-mac-address = <&factory 0xf100>;
+ mediatek,mtd-eeprom = <&factory 0x0>;
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0xf100>;
+ mediatek,portmap = "wllll";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "p0led_an", "p2led_an", "perst";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7628an_tplink_8m.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tplink,tl-wr841n-v13", "mediatek,mt7628an-soc";
+ model = "TP-Link TL-WR841N v13";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ rfkill {
+ label = "rfkill";
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "tl-wr841n-v13:green:power";
+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "tl-wr841n-v13:green:wps";
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ };
+
+ lan1 {
+ label = "tl-wr841n-v13:green:lan1";
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2 {
+ label = "tl-wr841n-v13:green:lan2";
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ };
+
+ lan3 {
+ label = "tl-wr841n-v13:green:lan3";
+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ };
+
+ lan4 {
+ label = "tl-wr841n-v13:green:lan4";
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_green {
+ label = "tl-wr841n-v13:green:wan";
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_orange {
+ label = "tl-wr841n-v13:orange:wan";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "tl-wr841n-v13:green:wlan";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "gpio", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "perst", "refclk", "uart1", "wdt", "wled_an";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tplink,tl-wr841n-v14", "mediatek,mt7628an-soc";
+ model = "TP-Link TL-WR841N v14";
+
+ aliases {
+ led-boot = &led_wlan;
+ led-failsafe = &led_wlan;
+ led-upgrade = &led_wlan;
+
+ led-wlan = &led_wlan;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x2000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ lan {
+ label = "tl-wr841n-v14:green:lan";
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_green {
+ label = "tl-wr841n-v14:green:wan";
+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ };
+
+ led_wlan: wlan {
+ label = "tl-wr841n-v14:green:wlan";
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wan_orange {
+ label = "tl-wr841n-v14:orange:wan";
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ m25p,chunked-io = <32>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "boot";
+ reg = <0x0 0x10000>;
+ read-only;
+ };
+
+ partition@10000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x10000 0x3e0000>;
+ };
+
+ factory: partition@3f0000 {
+ label = "factory";
+ reg = <0x3f0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&ehci {
+ status = "disabled";
+};
+
+&ohci {
+ status = "disabled";
+};
+
+&wmac {
+ status = "okay";
+ mtd-mac-address = <&factory 0xf100>;
+ mediatek,mtd-eeprom = <&factory 0x10000>;
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0xf100>;
+ mediatek,portmap = "wllll";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "p4led_an", "p3led_an", "p2led_an", "p1led_an", "p0led_an", "wdt";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&gpio1 {
+ led_wlan_enable {
+ gpio-hog;
+ gpios = <11 GPIO_ACTIVE_HIGH>;
+ output-high;
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7628an_tplink_8m.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tplink,tl-wr842n-v5", "mediatek,mt7628an-soc";
+ model = "TP-Link TL-WR842N v5";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ rfkill {
+ label = "rfkill";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ lan {
+ label = "tl-wr842n-v5:green:lan";
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power: power {
+ label = "tl-wr842n-v5:green:power";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "tl-wr842n-v5:green:usb";
+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ wan {
+ label = "tl-wr842n-v5:green:wan";
+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_amber {
+ label = "tl-wr842n-v5:amber:wan";
+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "tl-wr842n-v5:green:wlan";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "tl-wr842n-v5:green:wps";
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "i2s", "p2led_an", "refclk", "uart1", "wdt", "wled_an";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7628an_tplink_8m.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tplink,tl-wr902ac-v3", "mediatek,mt7628an-soc";
+ model = "TP-Link TL-WR902AC v3";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ sw1 {
+ label = "sw1";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ sw2 {
+ label = "sw2";
+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ lan {
+ label = "tl-wr902ac-v3:green:lan";
+ gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_power: power {
+ label = "tl-wr902ac-v3:green:power";
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "tl-wr902ac-v3:green:usb";
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ wan {
+ label = "tl-wr902ac-v3:green:wan";
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "tl-wr902ac-v3:green:wlan";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "tl-wr902ac-v3:green:wps";
+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "i2s", "p0led_an", "p2led_an", "p4led_an", "uart1", "wdt", "wled_an";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x28000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ mtd-mac-address = <&factory 0xf100>;
+ mtd-mac-address-increment = <(-1)>;
+ };
+};
--- /dev/null
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2017 Kristian Evensen <kristian.evensen@gmail.com>.
+ * Copyright(c) 2017 Piotr Dymacz <pepe2k@gmail.com>.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "mt7628an_unielec_u7628-01.dtsi"
+
+/ {
+ compatible = "unielec,u7628-01-128m-16m", "unielec,u7628-01", "mediatek,mt7628an-soc";
+ model = "UniElec U7628-01 (128M RAM/16M flash)";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <12000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bootloader";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "config";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+ };
+};
--- /dev/null
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2017 Kristian Evensen <kristian.evensen@gmail.com>.
+ * Copyright(c) 2017 Piotr Dymacz <pepe2k@gmail.com>.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "unielec,u7628-01", "mediatek,mt7628an-soc";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+ reset {
+ label = "reset";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "u7628-01:green:power";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "u7628-01:green:wlan";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "u7628-01:green:wan";
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ };
+
+ lan1 {
+ label = "u7628-01:green:lan1";
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2 {
+ label = "u7628-01:green:lan2";
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ };
+
+ lan3 {
+ label = "u7628-01:green:lan3";
+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ };
+
+ lan4 {
+ label = "u7628-01:green:lan4";
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "u7628-01:green:usb";
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&wmac {
+ status = "okay";
+ ralink,mtd-eeprom = <&factory 0x0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "gpio", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "refclk", "wdt", "wled_an";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7628an_vocore_vocore2.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "vocore,vocore2-lite", "vocore,vocore2", "mediatek,mt7628an-soc";
+ model = "VoCore2-Lite";
+
+ aliases {
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status: status {
+ label = "vocore2lite:green:status";
+ gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7628an_vocore_vocore2.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "vocore,vocore2", "mediatek,mt7628an-soc";
+ model = "VoCore2";
+
+ aliases {
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status: status {
+ label = "vocore2:fuchsia:status";
+ gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+ };
+};
--- /dev/null
+#include "mt7628an.dtsi"
+
+/ {
+ compatible = "vocore,vocore2", "mediatek,mt7628an-soc";
+
+ chosen {
+ bootargs = "console=ttyS2,115200";
+ };
+};
+
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "wled_an", "refclk", "wdt";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+ ralink,mtd-eeprom = <&factory 0x4>;
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x7>;
+ mediatek,portdisable = <0x3a>;
+};
+
+&i2s {
+ status = "okay";
+};
+
+&gdma {
+ status = "okay";
+};
+
+&pwm {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+#include "mt7628an.dtsi"
+
+/ {
+ compatible = "wavlink,wl-wn570ha1", "mediatek,mt7628an-soc";
+ model = "Wavlink WL-WN570HA1";
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "wl-wn570ha1:green:power";
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ wan {
+ label = "wl-wn570ha1:green:wan";
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi-high {
+ label = "wl-wn570ha1:green:wifi-high";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi-med {
+ label = "wl-wn570ha1:green:wifi-med";
+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi-low {
+ label = "wl-wn570ha1:green:wifi-low";
+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi {
+ label = "wl-wn570ha1:green:wifi";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "wled_an", "p0led_an", "wdt", "refclk";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x2e>;
+ mediatek,portmap = "llllw";
+};
--- /dev/null
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+#include "mt7628an.dtsi"
+
+/ {
+ compatible = "wavlink,wl-wn575a3", "mediatek,mt7628an-soc";
+ model = "Wavlink WL-WN575A3";
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wifi-high {
+ label = "wl-wn575a3:green:wifi-high";
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi-med {
+ label = "wl-wn575a3:green:wifi-med";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi-low {
+ label = "wl-wn575a3:green:wifi-low";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "wl-wn575a3:green:wps";
+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "wled_an", "gpio", "refclk", "wdt", "p0led_an";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+ mediatek,portmap = "llllw";
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7628an_widora_neo.dtsi"
+
+/ {
+ compatible = "widora,neo-16m", "widora,neo", "mediatek,mt7628an-soc";
+ model = "Widora-NEO (16M)";
+};
+
+&spi0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x0fb0000>;
+ };
+ };
+ };
+
+ spidev@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "linux,spidev";
+ reg = <1>;
+ spi-max-frequency = <40000000>;
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7628an_widora_neo.dtsi"
+
+/ {
+ compatible = "widora,neo-32m", "widora,neo", "mediatek,mt7628an-soc";
+ model = "Widora-NEO (32M)";
+};
+
+&spi0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x1fb0000>;
+ };
+ };
+ };
+
+ spidev@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "linux,spidev";
+ reg = <1>;
+ spi-max-frequency = <40000000>;
+ };
+};
--- /dev/null
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "widora,neo", "mediatek,mt7628an-soc";
+
+ aliases {
+ led-boot = &led_wifi;
+ led-failsafe = &led_wifi;
+ led-running = &led_wifi;
+ led-upgrade = &led_wifi;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_wifi: wifi {
+ label = "widora:orange:wifi";
+ gpios = <&wgpio 0 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ wps {
+ label = "reset";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ wgpio: gpio-wifi {
+ compatible = "mediatek,gpio-wifi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "gpio";
+ ralink,function = "gpio";
+ };
+
+ perst {
+ ralink,group = "perst";
+ ralink,function = "gpio";
+ };
+
+ refclk {
+ ralink,group = "refclk";
+ ralink,function = "gpio";
+ };
+
+ i2s {
+ ralink,group = "i2s";
+ ralink,function = "gpio";
+ };
+
+ spis {
+ ralink,group = "spis";
+ ralink,function = "gpio";
+ };
+
+ wled_kn {
+ ralink,group = "wled_kn";
+ ralink,function = "gpio";
+ };
+
+ wled_an {
+ ralink,group = "wled_an";
+ ralink,function = "wled_an";
+ };
+
+ wdt {
+ ralink,group = "wdt";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&i2c {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&pwm {
+ status = "okay";
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&sdhci {
+ status = "okay";
+ mediatek,cd-low;
+};
+
+&wmac {
+ status = "okay";
+};
--- /dev/null
+//SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "wiznet,wizfi630s", "mediatek,mt7628an-soc";
+ model = "WIZnet WizFi630S";
+
+ chosen {
+ bootargs = "console=ttyS1,115200";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ aliases {
+ led-boot = &led_run;
+ led-failsafe = &led_run;
+ led-running = &led_run;
+ led-upgrade = &led_run;
+ serial0 = &uart1;
+ serial1 = &uartlite;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_run: run {
+ label = "wizfi630s:green:run";
+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+ };
+
+ ledwps {
+ label = "wizfi630s:green:wps";
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ };
+
+ leduart1 {
+ label = "wizfi630s:green:uart1";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ };
+
+ leduart2 {
+ label = "wizfi630s:green:uart2";
+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ scm1 {
+ label = "SCM1";
+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ };
+
+ scm2 {
+ label = "SCM2";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_2>;
+ };
+
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "gpio";
+ ralink,function = "gpio";
+ };
+
+ i2s {
+ ralink,group = "i2s";
+ ralink,function = "gpio";
+ };
+
+ wdt {
+ ralink,group = "wdt";
+ ralink,function = "gpio";
+ };
+
+
+ i2c {
+ ralink,group = "i2c";
+ ralink,function = "gpio";
+ };
+
+ refclk {
+ ralink,group = "refclk";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+ m25p,chunked-io = <31>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x1fb0000>;
+ };
+ };
+ };
+};
+
+&i2c {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&pwm {
+ status = "okay";
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x3e>;
+};
+
+&sdhci {
+ status = "okay";
+ mediatek,cd-high;
+};
+
+&wmac {
+ status = "okay";
+};
--- /dev/null
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "wrtnode,wrtnode2", "mediatek,mt7628an-soc";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x1fb0000>;
+ };
+ };
+ };
+
+ spidev@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "linux,spidev";
+ reg = <1>;
+ spi-max-frequency = <10000000>;
+ };
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&i2c {
+ status = "okay";
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "llllw";
+};
+
+&sdhci {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7628an_wrtnode_wrtnode2.dtsi"
+
+/ {
+ compatible = "wrtnode,wrtnode2p", "wrtnode,wrtnode2", "mediatek,mt7628an-soc";
+ model = "WRTnode2P";
+
+ aliases {
+ led-boot = &led_indicator;
+ led-failsafe = &led_indicator;
+ led-running = &led_indicator;
+ led-upgrade = &led_indicator;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_indicator: indicator {
+ label = "wrtnode:blue:indicator";
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "gpio";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7628an_wrtnode_wrtnode2.dtsi"
+
+/ {
+ compatible = "wrtnode,wrtnode2r", "wrtnode,wrtnode2", "mediatek,mt7628an-soc";
+ model = "WRTnode2R";
+
+ aliases {
+ led-boot = &led_indicator;
+ led-failsafe = &led_indicator;
+ led-running = &led_indicator;
+ led-upgrade = &led_indicator;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+
+ led_indicator: indicator {
+ label = "wrtnode:blue:indicator";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "gpio";
+ ralink,function = "gpio";
+ };
+ };
+
+ led_pins: led {
+ gpio {
+ ralink,group = "wled_an";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+//SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "xiaomi,mir4a-100m", "mediatek,mt7628an-soc";
+ model = "Xiaomi Mi Router 4A (100M Edition)";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ aliases {
+ led-boot = &power_yellow;
+ led-failsafe = &power_yellow;
+ led-running = &power_blue;
+ led-upgrade = &power_yellow;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power_blue: power_blue {
+ label = "mir4a-100m:blue:power";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ power_yellow: power_yellow {
+ label = "mir4a-100m:yellow:power";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bootloader";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "config";
+ reg = <0x20000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@30000 {
+ label = "factory";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "crash";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "cfg_bak";
+ reg = <0x50000 0x10000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "overlay";
+ reg = <0x60000 0x100000>;
+ read-only;
+ };
+
+ partition@160000 {
+ label = "firmware";
+ reg = <0x160000 0xea0000>;
+ compatible = "denx,uimage";
+ };
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "gpio", "wdt", "wled_an";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+ mtd-mac-address-increment = <(-1)>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+ mediatek,portdisable = <0x2a>;
+};
+
+&wmac {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "xiaomi,miwifi-nano", "mediatek,mt7628an-soc";
+ model = "MiWiFi Nano";
+
+ aliases {
+ led-boot = &led_blue;
+ led-failsafe = &led_blue;
+ led-running = &led_blue;
+ led-upgrade = &led_blue;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_blue: status_blue {
+ label = "miwifi-nano:blue:status";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+ status_red {
+ label = "miwifi-nano:red:status";
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ };
+ status_amber {
+ label = "miwifi-nano:amber:status";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "refclk", "wled_an", "gpio";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+ ralink,mtd-eeprom = <&factory 0x4>;
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+#include "mt7628an.dtsi"
+
+/ {
+ compatible = "zbtlink,zbt-we1226", "mediatek,mt7628an-soc";
+ model = "Zbtlink ZBT-WE1226";
+
+ aliases {
+ led-boot = &led_wlan;
+ led-failsafe = &led_wlan;
+ led-running = &led_wlan;
+ led-upgrade = &led_wlan;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wan {
+ label = "zbt-we1226:green:wan";
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ };
+
+ lan1 {
+ label = "zbt-we1226:green:lan1";
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2 {
+ label = "zbt-we1226:green:lan2";
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ };
+
+ led_wlan: wlan {
+ label = "zbt-we1226:green:wlan";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "p0led_an", "p1led_an", "p4led_an", "wdt", "wled_an";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+ ralink,mtd-eeprom = <&factory 0x4>;
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x2e>;
+ mediatek,portmap = "llllw";
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "zyxel,keenetic-extra-ii", "mediatek,mt7628an-soc";
+ model = "ZyXEL Keenetic Extra II";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600n8";
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ fn {
+ label = "fn";
+ gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "keenetic-extra-ii:green:power";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ internet {
+ label = "keenetic-extra-ii:green:internet";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi {
+ label = "keenetic-extra-ii:green:wifi";
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "keenetic-extra-ii:green:usb";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ usbpower {
+ gpio-export,name = "usbpower";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-config";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "rf-eeprom";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xe90000>;
+ };
+
+ partition@ee0000 {
+ label = "config_1";
+ reg = <0xee0000 0x10000>;
+ read-only;
+ };
+
+ partition@ef0000 {
+ label = "storage";
+ reg = <0xef0000 0x100000>;
+ read-only;
+ };
+
+ partition@ff0000 {
+ label = "dump";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+
+ partition@1000000 {
+ label = "u-state";
+ reg = <0x1000000 0x30000>;
+ read-only;
+ };
+
+ partition@1030000 {
+ label = "u-config_res";
+ reg = <0x1030000 0x10000>;
+ read-only;
+ };
+
+ partition@1040000 {
+ label = "rf-eeprom_res";
+ reg = <0x1040000 0x10000>;
+ read-only;
+ };
+
+ partition@1050000 {
+ label = "firmware_2";
+ reg = <0x1050000 0xe90000>;
+ read-only;
+ };
+
+ partition@1ee0000 {
+ label = "config_2";
+ reg = <0x1ee0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "wllll";
+};
+
+&wmac {
+ status = "okay";
+ mediatek,mtd-eeprom = <&factory 0x0>;
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ mtd-mac-address = <&factory 0x8004>;
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "gpio", "i2s", "refclk", "spi cs1", "uart1", "wled_an";
+ ralink,function = "gpio";
+ };
+ };
+};
#
define Device/tplink
+ MTK_SOC := mt7628an
DEVICE_VENDOR := TP-Link
TPLINK_FLASHLAYOUT :=
TPLINK_HWID :=
define Device/alfa-network_awusfree1
- DTS := AWUSFREE1
+ MTK_SOC := mt7628an
IMAGE_SIZE := $(ralink_default_fw_size_8M)
DEVICE_VENDOR := ALFA Network
DEVICE_MODEL := AWUSFREE1
TARGET_DEVICES += alfa-network_awusfree1
define Device/cudy_wr1000
- DTS := WR1000
+ MTK_SOC := mt7628an
IMAGE_SIZE := $(ralink_default_fw_size_8M)
IMAGES += factory.bin
IMAGE/factory.bin := \
TARGET_DEVICES += cudy_wr1000
define Device/tama_w06
- DTS := W06
+ MTK_SOC := mt7628an
IMAGE_SIZE := 15040k
DEVICE_VENDOR := Tama
DEVICE_MODEL := W06
TARGET_DEVICES += tama_w06
define Device/duzun_dm06
- DTS := DUZUN-DM06
+ MTK_SOC := mt7628an
DEVICE_VENDOR := DuZun
DEVICE_MODEL := DM06
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
TARGET_DEVICES += duzun_dm06
define Device/glinet_gl-mt300n-v2
- DTS := GL-MT300N-V2
+ MTK_SOC := mt7628an
IMAGE_SIZE := 16064k
DEVICE_VENDOR := GL.iNet
DEVICE_MODEL := GL-MT300N
TARGET_DEVICES += glinet_gl-mt300n-v2
define Device/glinet_vixmini
- DTS := VIXMINI
+ MTK_SOC := mt7628an
IMAGE_SIZE := 7872k
DEVICE_VENDOR := GL.iNet
DEVICE_MODEL := VIXMINI
TARGET_DEVICES += glinet_vixmini
define Device/hiwifi_hc5661a
- DTS := HC5661A
+ MTK_SOC := mt7628an
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_VENDOR := HiWiFi
DEVICE_MODEL := HC5661A
TARGET_DEVICES += hiwifi_hc5661a
define Device/hilink_hlk-7628n
- DTS := HLK-7628N
+ MTK_SOC := mt7628an
IMAGE_SIZE := $(ralink_default_fw_size_32M)
DEVICE_VENDOR := HILINK
DEVICE_MODEL := HLK-7628N
TARGET_DEVICES += hilink_hlk-7628n
define Device/hiwifi_hc5861b
- DTS := HC5861B
+ MTK_SOC := mt7628an
IMAGE_SIZE := 15808k
DEVICE_VENDOR := HiWiFi
DEVICE_MODEL := HC5861B
TARGET_DEVICES += hiwifi_hc5861b
define Device/mediatek_linkit-smart-7688
- DTS := LINKIT7688
+ MTK_SOC := mt7628an
IMAGE_SIZE := $(ralink_default_fw_size_32M)
DEVICE_VENDOR := MediaTek
DEVICE_MODEL := LinkIt Smart 7688
TARGET_DEVICES += mediatek_linkit-smart-7688
define Device/mercury_mac1200r-v2
- DTS := MAC1200RV2
+ MTK_SOC := mt7628an
DEVICE_VENDOR := Mercury
DEVICE_MODEL := MAC1200R
DEVICE_VARIANT := v2.0
TARGET_DEVICES += mercury_mac1200r-v2
define Device/xiaomi_miwifi-nano
- DTS := MIWIFI-NANO
+ MTK_SOC := mt7628an
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := MiWiFi Nano
TARGET_DEVICES += xiaomi_miwifi-nano
define Device/mediatek_mt7628an-eval-board
- DTS := MT7628
+ MTK_SOC := mt7628an
BLOCKSIZE := 64k
IMAGE_SIZE := $(ralink_default_fw_size_4M)
DEVICE_VENDOR := MediaTek
TARGET_DEVICES += mediatek_mt7628an-eval-board
define Device/netgear_r6120
- DTS := R6120
+ MTK_SOC := mt7628an
BLOCKSIZE := 64k
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_VENDOR := NETGEAR
TARGET_DEVICES += netgear_r6120
define Device/onion_omega2
- DTS := OMEGA2
+ MTK_SOC := mt7628an
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_VENDOR := Onion
DEVICE_MODEL := Omega2
TARGET_DEVICES += onion_omega2
define Device/onion_omega2p
- DTS := OMEGA2P
+ MTK_SOC := mt7628an
IMAGE_SIZE := $(ralink_default_fw_size_32M)
DEVICE_VENDOR := Onion
DEVICE_MODEL := Omega2+
TARGET_DEVICES += onion_omega2p
define Device/d-team_pbr-d1
- DTS := PBR-D1
+ MTK_SOC := mt7628an
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_VENDOR := PandoraBox
DEVICE_MODEL := PBR-D1
TARGET_DEVICES += d-team_pbr-d1
define Device/rakwireless_rak633
- DTS := RAK633
+ MTK_SOC := mt7628an
DEVICE_VENDOR := Rakwireless
DEVICE_MODEL := RAK633
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
TARGET_DEVICES += rakwireless_rak633
define Device/skylab_skw92a
- DTS := SKW92A
+ MTK_SOC := mt7628an
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Skylab
DEVICE_MODEL := SKW92A
TARGET_DEVICES += skylab_skw92a
define Device/totolink_lr1200
- DTS := TOTOLINK-LR1200
+ MTK_SOC := mt7628an
IMAGE_SIZE := 7872k
DEVICE_VENDOR := TOTOLINK
DEVICE_MODEL := LR1200
define Device/tplink_tl-wa801nd-v5
$(Device/tplink)
- DTS := TL-WA801NDV5
IMAGE_SIZE := 7808k
DEVICE_MODEL := TL-WA801ND
DEVICE_VARIANT := v5
define Device/tplink_tl-wr802n-v4
$(Device/tplink)
- DTS := TL-WR802NV4
IMAGE_SIZE := 7808k
DEVICE_MODEL := TL-WR802N
DEVICE_VARIANT := v4
define Device/tplink_tl-wr840n-v4
$(Device/tplink)
- DTS := TL-WR840NV4
IMAGE_SIZE := 7808k
DEVICE_MODEL := TL-WR840N
DEVICE_VARIANT := v4
TARGET_DEVICES += tplink_tl-wr840n-v4
define Device/tplink_tl-wr840n-v5
- DTS := TL-WR840NV5
+ MTK_SOC := mt7628an
IMAGE_SIZE := 3904k
DEVICE_MODEL := TL-WR840N
DEVICE_VARIANT := v5
define Device/tplink_tl-wr841n-v13
$(Device/tplink)
- DTS := TL-WR841NV13
IMAGE_SIZE := 7808k
DEVICE_MODEL := TL-WR841N
DEVICE_VARIANT := v13
define Device/tplink_tl-wr841n-v14
$(Device/tplink)
- DTS := TL-WR841NV14
IMAGE_SIZE := 3968k
DEVICE_MODEL := TL-WR841N
DEVICE_VARIANT := v14
define Device/tplink_archer-c20-v4
$(Device/tplink)
- DTS := ArcherC20v4
IMAGE_SIZE := 7808k
DEVICE_MODEL := Archer C20
DEVICE_VARIANT := v4
define Device/tplink_archer-c50-v3
$(Device/tplink)
- DTS := ArcherC50V3
IMAGE_SIZE := 7808k
DEVICE_MODEL := Archer C50
DEVICE_VARIANT := v3
define Device/tplink_archer-c50-v4
$(Device/tplink)
- DTS := ArcherC50V4
IMAGE_SIZE := 7616k
DEVICE_MODEL := Archer C50
DEVICE_VARIANT := v4
define Device/tplink_tl-mr3020-v3
$(Device/tplink)
- DTS := TL-MR3020V3
IMAGE_SIZE := 7808k
DEVICE_MODEL := TL-MR3020
DEVICE_VARIANT := v3
define Device/tplink_tl-mr3420-v5
$(Device/tplink)
- DTS := TL-MR3420V5
IMAGE_SIZE := 7808k
DEVICE_MODEL := TL-MR3420
DEVICE_VARIANT := v5
define Device/tplink_tl-wr842n-v5
$(Device/tplink)
- DTS := TL-WR842NV5
IMAGE_SIZE := 7808k
DEVICE_MODEL := TL-WR842N
DEVICE_VARIANT := v5
define Device/tplink_tl-wr902ac-v3
$(Device/tplink)
- DTS := TL-WR902ACV3
IMAGE_SIZE := 7808k
DEVICE_MODEL := TL-WR902AC
DEVICE_VARIANT := v3
TARGET_DEVICES += tplink_tl-wr902ac-v3
define Device/unielec_u7628-01-128m-16m
- DTS := U7628-01-128M-16M
+ MTK_SOC := mt7628an
IMAGE_SIZE := 16064k
DEVICE_VENDOR := UniElec
DEVICE_MODEL := U7628-01
TARGET_DEVICES += unielec_u7628-01-128m-16m
define Device/vocore_vocore2
- DTS := VOCORE2
+ MTK_SOC := mt7628an
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_VENDOR := VoCore
DEVICE_MODEL := VoCore2
TARGET_DEVICES += vocore_vocore2
define Device/vocore_vocore2-lite
- DTS := VOCORE2LITE
+ MTK_SOC := mt7628an
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_VENDOR := VoCore
DEVICE_MODEL := VoCore2-Lite
TARGET_DEVICES += vocore_vocore2-lite
define Device/wavlink_wl-wn570ha1
- DTS := WL-WN570HA1
+ MTK_SOC := mt7628an
IMAGE_SIZE := $(ralink_default_fw_size_8M)
DEVICE_VENDOR := Wavlink
DEVICE_MODEL := WL-WN570HA1
TARGET_DEVICES += wavlink_wl-wn570ha1
define Device/wavlink_wl-wn575a3
- DTS := WL-WN575A3
+ MTK_SOC := mt7628an
IMAGE_SIZE := $(ralink_default_fw_size_8M)
DEVICE_VENDOR := Wavlink
DEVICE_MODEL := WL-WN575A3
TARGET_DEVICES += wavlink_wl-wn575a3
define Device/buffalo_wcr-1166ds
- DTS := WCR-1166DS
+ MTK_SOC := mt7628an
BUFFALO_TAG_PLATFORM := MTK
BUFFALO_TAG_VERSION := 9.99
BUFFALO_TAG_MINOR := 9.99
TARGET_DEVICES += buffalo_wcr-1166ds
define Device/widora_neo-16m
- DTS := WIDORA-NEO-16M
+ MTK_SOC := mt7628an
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_VENDOR := Widora
DEVICE_MODEL := Widora-NEO
TARGET_DEVICES += widora_neo-16m
define Device/widora_neo-32m
- DTS := WIDORA-NEO-32M
+ MTK_SOC := mt7628an
IMAGE_SIZE := $(ralink_default_fw_size_32M)
DEVICE_VENDOR := Widora
DEVICE_MODEL := Widora-NEO
TARGET_DEVICES += widora_neo-32m
define Device/wiznet_wizfi630s
- DTS := WIZFI630S
+ MTK_SOC := mt7628an
IMAGE_SIZE := $(ralink_default_fw_size_32M)
DEVICE_VENDOR := WIZnet
DEVICE_MODEL := WizFi630S
TARGET_DEVICES += wiznet_wizfi630s
define Device/wrtnode_wrtnode2p
- DTS := WRTNODE2P
+ MTK_SOC := mt7628an
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_VENDOR := WRTnode
DEVICE_MODEL := WRTnode 2P
TARGET_DEVICES += wrtnode_wrtnode2p
define Device/wrtnode_wrtnode2r
- DTS := WRTNODE2R
+ MTK_SOC := mt7628an
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_VENDOR := WRTnode
DEVICE_MODEL := WRTnode 2R
TARGET_DEVICES += wrtnode_wrtnode2r
define Device/xiaomi_mir4a-100m
- DTS := XIAOMI-MIR4A-100M
+ MTK_SOC := mt7628an
IMAGE_SIZE := 14976k
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := Mi Router 4A
TARGET_DEVICES += xiaomi_mir4a-100m
define Device/zbtlink_zbt-we1226
- DTS := ZBT-WE1226
+ MTK_SOC := mt7628an
IMAGE_SIZE := $(ralink_default_fw_size_8M)
DEVICE_VENDOR := ZBTlink
DEVICE_MODEL := ZBT-WE1226
TARGET_DEVICES += zbtlink_zbt-we1226
define Device/zyxel_keenetic-extra-ii
- DTS := ki_rb
+ MTK_SOC := mt7628an
IMAGE_SIZE := 14912k
BLOCKSIZE := 64k
DEVICE_VENDOR := ZyXEL
projects / openwrt / staging / mkresin.git / commitdiff