target/linux/ath79/dts/qca9558_openmesh_mr.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca955x.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         chosen {
  10                 /delete-property/ bootargs;
  11         };
  12
  13         aliases {
  14                 serial0 = &uart;
  15                 led-boot = &led_power_blue;
  16                 led-failsafe = &led_power_blue;
  17                 led-running = &led_power_blue;
  18                 led-upgrade = &led_power_blue;
  19                 label-mac-device = &eth0;
  20         };
  21
  22         keys {
  23                 compatible = "gpio-keys";
  24
  25                 reset {
  26                         label = "reset";
  27                         linux,code = <KEY_RESTART>;
  28                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  29                 };
  30         };
  31
  32         leds {
  33                 compatible = "gpio-leds";
  34
  35                 lan_blue {
  36                         label = "blue:lan";
  37                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  38                 };
  39
  40                 led_wifi2g: wifi2g {
  41                         label = "blue:wifi2g";
  42                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  43                 };
  44
  45                 status_green {
  46                         label = "green:status";
  47                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  48                 };
  49
  50                 status_red {
  51                         label = "red:status";
  52                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
  53                 };
  54
  55                 led_power_blue: power_blue {
  56                         label = "blue:power";
  57                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  58                         default-state = "on";
  59                 };
  60
  61                 led_wifi5g: wifi5g {
  62                         label = "blue:wifi5g";
  63                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  64                 };
  65         };
  66
  67         watchdog {
  68                 compatible = "linux,wdt-gpio";
  69                 gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  70                 hw_algo = "toggle";
  71                 /* hw_margin_ms is actually 300s but driver limits it to 60s */
  72                 hw_margin_ms = <60000>;
  73                 always-running;
  74         };
  75 };
  76
  77 &uart {
  78         status = "okay";
  79 };
  80
  81 &spi {
  82         status = "okay";
  83
  84         flash@0 {
  85                 compatible = "jedec,spi-nor";
  86                 reg = <0>;
  87                 spi-max-frequency = <40000000>;
  88
  89                 /* partitions are passed via bootloader */
  90                 partitions {
  91                         compatible = "fixed-partitions";
  92                         #address-cells = <1>;
  93                         #size-cells = <1>;
  94
  95                         partition@0 {
  96                                 label = "u-boot";
  97                                 reg = <0x000000 0x040000>;
  98                                 read-only;
  99                         };
 100
 101                         partition@40000 {
 102                                 label = "u-boot-env";
 103                                 reg = <0x040000 0x010000>;
 104                         };
 105
 106                         partition@50000 {
 107                                 label = "custom";
 108                                 reg = <0x050000 0x060000>;
 109                                 read-only;
 110                         };
 111
 112                         partition@b0000 {
 113                                 label = "inactive";
 114                                 reg = <0x0b0000 0x7a0000>;
 115                         };
 116
 117                         partition@850000 {
 118                                 label = "inactive2";
 119                                 reg = <0x850000 0x7a0000>;
 120                         };
 121
 122                         art: partition@ff0000 {
 123                                 label = "ART";
 124                                 reg = <0xff0000 0x010000>;
 125                                 read-only;
 126                         };
 127                 };
 128         };
 129 };
 130
 131 &mdio0 {
 132         status = "okay";
 133
 134         phy-mask = <0x20>;
 135
 136         phy5: ethernet-phy@5 {
 137                 reg = <5>;
 138                 eee-broken-100tx;
 139                 eee-broken-1000t;
 140         };
 141 };
 142
 143 &eth0 {
 144         status = "okay";
 145
 146         pll-data = <0x82000000 0x80000101 0x80001313>;
 147
 148         mtd-mac-address = <&art 0x0>;
 149
 150         phy-mode = "rgmii-id";
 151         phy-handle = <&phy5>;
 152
 153         gmac-config {
 154                 device = <&gmac>;
 155                 rgmii-enabled = <1>;
 156         };
 157 };
 158
 159 &wmac {
 160         status = "okay";
 161
 162         mtd-cal-data = <&art 0x1000>;
 163         mtd-mac-address = <&art 0x0>;
 164         mtd-mac-address-increment = <1>;
 165 };
 166
 167 &pcie0 {
 168         status = "okay";
 169 };