3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
9 compatible = "belkin,f5d8235-v1", "ralink,rt2880-soc";
10 model = "Belkin F5D8235 v1";
13 led-boot = &led_wired_blue;
14 led-failsafe = &led_wired_blue;
18 compatible = "cfi-flash";
19 reg = <0xbc400000 0x800000>;
24 compatible = "fixed-partitions";
36 reg = <0x30000 0x10000>;
40 factory: partition@40000 {
41 compatible = "nvmem-cells";
43 reg = <0x40000 0x10000>;
48 eeprom_factory_0: eeprom@0 {
52 macaddr_factory_4: macaddr@4 {
58 compatible = "denx,uimage";
60 reg = <0x50000 0x7b0000>;
66 compatible = "realtek,rtl8366s";
67 gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
68 gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
109 realtek,green-ethernet-features;
113 compatible = "gpio-keys-polled";
114 poll-interval = <100>;
118 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
119 linux,code = <KEY_WPS_BUTTON>;
124 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
125 linux,code = <KEY_RESTART>;
130 compatible = "gpio-leds";
133 label = "blue:internet";
134 gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
138 label = "amber:internet";
139 gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
143 label = "blue:modem";
144 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
148 label = "amber:modem";
149 gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
153 label = "blue:router";
154 gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
158 label = "blue:storage";
159 gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
160 trigger-sources = <&ohci_port1>, <&ehci_port1>;
161 linux,default-trigger = "usbport";
165 label = "amber:storage";
166 gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
170 label = "blue:security";
171 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
175 label = "amber:security";
176 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
179 led_wired_blue: wired {
180 label = "blue:wired";
181 gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
185 label = "amber:wired";
186 gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
190 label = "blue:wireless";
191 gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
195 label = "amber:wireless";
196 gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
203 groups = "spi", "i2c", "jtag", "mdio", "uartlite";
210 nvmem-cells = <&macaddr_factory_4>;
211 nvmem-cell-names = "mac-address";
214 mediatek,fixed-link = <1000 1 1 1>;
222 #address-cells = <1>;
224 compatible = "pci1033,0035";
225 reg = <0x8800 0 0 0 0>;
229 #trigger-source-cells = <0>;
234 #address-cells = <1>;
236 compatible = "pci1033,00e0";
237 reg = <0x8900 0 0 0 0>;
241 #trigger-source-cells = <0>;
247 nvmem-cells = <&eeprom_factory_0>;
248 nvmem-cell-names = "eeprom";