3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
7 compatible = "arcwireless,freestation5", "ralink,rt3050-soc";
8 model = "ARC FreeStation5";
11 bootargs = "console=ttyS0,115200";
15 compatible = "cfi-flash";
16 reg = <0x1f000000 0x800000>;
21 compatible = "fixed-partitions";
33 reg = <0x30000 0x10000>;
37 factory: partition@40000 {
39 reg = <0x40000 0x10000>;
44 compatible = "denx,uimage";
46 reg = <0x50000 0x7b0000>;
52 compatible = "gpio-export";
55 * Used to enable power-over-ethernet passthrough from port0 to port1.
56 * Disable passthrough by default to prevent accidental equipment damage.
59 gpio-export,name = "poe-passthrough";
60 gpio-export,output = <1>;
61 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
66 compatible = "gpio-leds";
69 * The following leds are defined in the ArcOS firmware, but reportedly
70 * not present in the Freestation5 device.
73 label = "unknown:wifi";
74 gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
78 label = "unknown:powerg";
79 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
83 label = "unknown:usb";
84 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
91 groups = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
97 nvmem-cells = <&macaddr_factory_4>;
98 nvmem-cell-names = "mac-address";
102 mediatek,portmap = <0x01>;
106 ralink,mtd-eeprom = <&factory 0x0>;
114 compatible = "nvmem-cells";
115 #address-cells = <1>;
118 macaddr_factory_4: macaddr@4 {