target/linux/ramips/dts/rt5350_planex_mzk-dp150n.dts

   1 #include "rt5350.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5 #include <dt-bindings/leds/common.h>
   6
   7 / {
   8         compatible = "planex,mzk-dp150n", "ralink,rt5350-soc";
   9         model = "Planex MZK-DP150N";
  10
  11         aliases {
  12                 led-boot = &led_power;
  13                 led-failsafe = &led_power;
  14                 led-running = &led_power;
  15                 led-upgrade = &led_power;
  16         };
  17
  18         leds {
  19                 compatible = "gpio-leds";
  20
  21                 led_power: power {
  22                         function = LED_FUNCTION_POWER;
  23                         color = <LED_COLOR_ID_GREEN>;
  24                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  25                 };
  26         };
  27
  28         keys {
  29                 compatible = "gpio-keys-polled";
  30                 poll-interval = <20>;
  31
  32                 reset {
  33                         label = "reset";
  34                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  35                         linux,code = <KEY_RESTART>;
  36                 };
  37         };
  38 };
  39
  40 &spi0 {
  41         status = "okay";
  42
  43         flash@0 {
  44                 compatible = "jedec,spi-nor";
  45                 reg = <0>;
  46                 spi-max-frequency = <10000000>;
  47
  48                 partitions {
  49                         compatible = "fixed-partitions";
  50                         #address-cells = <1>;
  51                         #size-cells = <1>;
  52
  53                         partition@0 {
  54                                 label = "uboot";
  55                                 reg = <0x0 0x30000>;
  56                                 read-only;
  57                         };
  58
  59                         partition@30000 {
  60                                 label = "uboot-env";
  61                                 reg = <0x30000 0x10000>;
  62                                 read-only;
  63                         };
  64
  65                         partition@40000 {
  66                                 label = "factory";
  67                                 reg = <0x40000 0x10000>;
  68                                 read-only;
  69
  70                                 nvmem-layout {
  71                                         compatible = "fixed-layout";
  72                                         #address-cells = <1>;
  73                                         #size-cells = <1>;
  74
  75                                         eeprom_factory_0: eeprom@0 {
  76                                                 reg = <0x0 0x200>;
  77                                         };
  78
  79                                         macaddr_factory_4: macaddr@4 {
  80                                                 reg = <0x4 0x6>;
  81                                         };
  82                                 };
  83                         };
  84
  85                         partition@50000 {
  86                                 compatible = "denx,uimage";
  87                                 label = "firmware";
  88                                 reg = <0x50000 0x3b0000>;
  89                         };
  90                 };
  91         };
  92 };
  93
  94 &spi1 {
  95         spidev@0 {
  96                 compatible = "linux,spidev";
  97                 spi-max-frequency = <10000000>;
  98                 reg = <0>;
  99         };
 100 };
 101
 102 &state_default {
 103         gpio {
 104                 groups = "jtag", "uartf", "led";
 105                 function = "gpio";
 106         };
 107 };
 108
 109 &ethernet {
 110         nvmem-cells = <&macaddr_factory_4>;
 111         nvmem-cell-names = "mac-address";
 112 };
 113
 114 &esw {
 115         mediatek,portmap = <0x17>;
 116 };
 117
 118 &wmac {
 119         ralink,led-polarity = <1>;
 120         nvmem-cells = <&eeprom_factory_0>;
 121         nvmem-cell-names = "eeprom";
 122 };