kernel: bump 5.15 to 5.15.75
[openwrt/openwrt.git] / target / linux / bcm27xx / patches-5.15 / 950-0150-clk-bcm2835-Allow-reparenting-leaf-clocks-while-they.patch
index 4caf953cede5707ff79acf1a2387345a10fe40ef..ee9bcc8517b5414e8258f8dbb457c9a7fabe8819 100644 (file)
@@ -15,7 +15,7 @@ Signed-off-by: Eric Anholt <eric@anholt.net>
 
 --- a/drivers/clk/bcm/clk-bcm2835.c
 +++ b/drivers/clk/bcm/clk-bcm2835.c
-@@ -1098,8 +1098,10 @@ static int bcm2835_clock_on(struct clk_h
+@@ -1128,8 +1128,10 @@ static int bcm2835_clock_on(struct clk_h
        return 0;
  }
  
@@ -28,7 +28,7 @@ Signed-off-by: Eric Anholt <eric@anholt.net>
  {
        struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
        struct bcm2835_cprman *cprman = clock->cprman;
-@@ -1121,6 +1123,11 @@ static int bcm2835_clock_set_rate(struct
+@@ -1151,6 +1153,11 @@ static int bcm2835_clock_set_rate(struct
                bcm2835_clock_wait_busy(clock);
        }
  
@@ -40,7 +40,7 @@ Signed-off-by: Eric Anholt <eric@anholt.net>
        ctl &= ~CM_FRAC;
        ctl |= (div & CM_DIV_FRAC_MASK) ? CM_FRAC : 0;
        cprman_write(cprman, data->ctl_reg, ctl);
-@@ -1132,6 +1139,12 @@ static int bcm2835_clock_set_rate(struct
+@@ -1162,6 +1169,12 @@ static int bcm2835_clock_set_rate(struct
        return 0;
  }
  
@@ -53,7 +53,7 @@ Signed-off-by: Eric Anholt <eric@anholt.net>
  static bool
  bcm2835_clk_is_pllc(struct clk_hw *hw)
  {
-@@ -1315,6 +1328,7 @@ static const struct clk_ops bcm2835_cloc
+@@ -1345,6 +1358,7 @@ static const struct clk_ops bcm2835_cloc
        .unprepare = bcm2835_clock_off,
        .recalc_rate = bcm2835_clock_get_rate,
        .set_rate = bcm2835_clock_set_rate,
@@ -61,7 +61,7 @@ Signed-off-by: Eric Anholt <eric@anholt.net>
        .determine_rate = bcm2835_clock_determine_rate,
        .set_parent = bcm2835_clock_set_parent,
        .get_parent = bcm2835_clock_get_parent,
-@@ -1497,7 +1511,6 @@ static struct clk_hw *bcm2835_register_c
+@@ -1527,7 +1541,6 @@ static struct clk_hw *bcm2835_register_c
                init.ops = &bcm2835_vpu_clock_clk_ops;
        } else {
                init.ops = &bcm2835_clock_clk_ops;