+# SPDX-License-Identifier: GPL-2.0-only
#
# Copyright (C) 2009-2013 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
KERNEL_LOADADDR:=0x8000
-define Device/dsa-migration
- DEVICE_COMPAT_VERSION := 1.1
- DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
+# Some info about Ctera firmware:
+# 1. It's simple tar file (GNU standard), but it must have ".firm" suffix.
+# 2. It contains two images: kernel and romdisk. Both are required.
+# 3. Every image has header and trailer file.
+# 4. The struct of tar firmware is: header kernel trailer header romdisk trailer
+# 5. In header file are some strings used to describe image. It was decoded from
+# factory image.
+# 6. Version format in header file is restricted by Original FW.
+# 7. Trailer file contains MD5 sum string of header and image file.
+# 8. Firmware file must have <=24MB size.
+
+define Build/ctera-firmware
+ mkdir -p $@.tmp
+
+ # Prepare header and trailer file for kernel
+ echo "# CTera firmware information file" > $@.tmp/header
+ echo "image_type=kernel" >> $@.tmp/header
+ echo "arch=Kirkwood" >> $@.tmp/header
+ echo "board=Any" >> $@.tmp/header
+ echo "version=3.1.22.30669" >> $@.tmp/header
+ echo "kernel_cmd=console=ttyS0,115200 earlyprintk" >> $@.tmp/header
+ echo "date=$$(date $(if $(SOURCE_DATE_EPOCH),-d@$(SOURCE_DATE_EPOCH)))" \
+ >> $@.tmp/header
+
+ cp $@ $@.tmp/kernel
+
+ echo "MD5=$$(cat $@.tmp/header $@.tmp/kernel | $(MKHASH) md5)" \
+ > $@.tmp/trailer
+
+ tar $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
+ -H gnu -C $@.tmp -cf $@.tar header kernel trailer
+
+ # Prepare header and trailer file for fake romdisk
+ echo "# CTera firmware information file" > $@.tmp/header
+ echo "image_type=romdisk" >> $@.tmp/header
+ echo "initrd=yes" >> $@.tmp/header
+ echo "arch=Kirkwood" >> $@.tmp/header
+ echo "board=Any" >> $@.tmp/header
+ echo "version=3.1.22.30669" >> $@.tmp/header
+ echo "date=$$(date $(if $(SOURCE_DATE_EPOCH),-d@$(SOURCE_DATE_EPOCH)))" \
+ >> $@.tmp/header
+
+ rm -f $@
+ touch $@
+ $(call Build/append-uImage-fakehdr, ramdisk)
+ cp $@ $@.tmp/romdisk
+
+ echo "MD5=$$(cat $@.tmp/header $@.tmp/romdisk | $(MKHASH) md5)" \
+ > $@.tmp/trailer
+
+ tar $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
+ -H gnu -C $@.tmp -rf $@.tar header romdisk trailer
+
+ mv $@.tar $@
+ rm -rf $@.tmp
+endef
+
+define Device/kernel-size-migration
+ DEVICE_COMPAT_VERSION := 2.0
+ DEVICE_COMPAT_MESSAGE := Partition design has changed compared to \
+ older versions (up to 21.02) due to kernel size restrictions. \
+ Upgrade via sysupgrade mechanism is not possible, so new \
+ installation via factory style image is required.
endef
define Device/Default
IMAGES := sysupgrade.bin factory.bin
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/factory.bin := append-ubi
- SUPPORTED_DEVICES = $(subst _,$(comma),$(1))
endef
define Device/checkpoint_l-50
DEVICE_VENDOR := Check Point
DEVICE_MODEL := L-50
DEVICE_PACKAGES := kmod-ath9k kmod-gpio-button-hotplug kmod-mvsdio \
- kmod-rtc-s35390a kmod-usb-ledtrig-usbport wpad-basic-wolfssl
+ kmod-rtc-s35390a kmod-usb-ledtrig-usbport wpad-basic-mbedtls
IMAGES := sysupgrade.bin
endef
TARGET_DEVICES += checkpoint_l-50
endef
TARGET_DEVICES += cloudengines_pogoplugv4
+define Device/ctera_c200-v1
+ DEVICE_VENDOR := Ctera
+ DEVICE_MODEL := C200
+ DEVICE_VARIANT := V1
+ DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-gpio-button-hotplug \
+ kmod-hwmon-lm63 kmod-rtc-s35390a kmod-usb-ledtrig-usbport
+ KERNEL := kernel-bin | append-dtb | uImage none | ctera-firmware
+ KERNEL_IN_UBI :=
+ KERNEL_SUFFIX := -factory.firm
+ IMAGES := sysupgrade.bin
+endef
+TARGET_DEVICES += ctera_c200-v1
+
+define Device/endian_4i-edge-200
+ DEVICE_VENDOR := Endian
+ DEVICE_MODEL := 4i Edge 200
+ DEVICE_ALT0_VENDOR := Endian
+ DEVICE_ALT0_MODEL := UTM Mini Firewall
+ DEVICE_PACKAGES := kmod-ath9k kmod-mvsdio wpad-basic-mbedtls
+ KERNEL_SIZE := 4096k
+ IMAGES := sysupgrade.bin
+endef
+TARGET_DEVICES += endian_4i-edge-200
+
+define Device/globalscale_sheevaplug
+ DEVICE_VENDOR := Globalscale
+ DEVICE_MODEL := Sheevaplug
+ DEVICE_PACKAGES := kmod-mvsdio
+endef
+TARGET_DEVICES += globalscale_sheevaplug
+
define Device/iom_iconnect-1.1
DEVICE_VENDOR := Iomega
DEVICE_MODEL := Iconnect
endef
TARGET_DEVICES += iom_ix2-200
+define Device/iom_ix4-200d
+ DEVICE_VENDOR := Iomega
+ DEVICE_MODEL := StorCenter ix4-200d
+ DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
+ kmod-gpio-button-hotplug kmod-gpio-nxp-74hc164 \
+ kmod-hwmon-adt7475 kmod-mvsdio kmod-spi-gpio
+ PAGESIZE := 512
+ SUBPAGESIZE := 256
+ BLOCKSIZE := 16k
+ KERNEL_SIZE := 3072k
+ KERNEL_IN_UBI :=
+ UBINIZE_OPTS := -E 5
+ IMAGE_SIZE := 31744k
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
+ check-size
+endef
+TARGET_DEVICES += iom_ix4-200d
+
+define Device/iptime_nas1
+ DEVICE_VENDOR := ipTIME
+ DEVICE_MODEL := NAS1
+ DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
+ kmod-gpio-button-hotplug kmod-gpio-pca953x kmod-hwmon-drivetemp \
+ kmod-hwmon-gpiofan kmod-usb-ledtrig-usbport -uboot-envtools
+ KERNEL := $$(KERNEL) | iptime-naspkg nas1
+ BLOCKSIZE := 256k
+ IMAGE_SIZE := 15872k
+ IMAGES := sysupgrade.bin
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
+ check-size | append-metadata
+endef
+TARGET_DEVICES += iptime_nas1
+
define Device/linksys
DEVICE_VENDOR := Linksys
- DEVICE_PACKAGES := kmod-mwl8k wpad-basic-wolfssl kmod-gpio-button-hotplug
+ DEVICE_PACKAGES := kmod-mwl8k wpad-basic-mbedtls kmod-gpio-button-hotplug
KERNEL_IN_UBI :=
UBINIZE_OPTS := -E 5
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
define Device/linksys_e4200-v2
$(Device/linksys)
- $(Device/dsa-migration)
+ $(Device/kernel-size-migration)
DEVICE_MODEL := E4200
DEVICE_VARIANT := v2
- KERNEL_SIZE := 2688k
+ KERNEL_SIZE := 3072k
SUPPORTED_DEVICES += linksys,viper linksys-viper
endef
TARGET_DEVICES += linksys_e4200-v2
define Device/linksys_ea3500
$(Device/linksys)
- $(Device/dsa-migration)
+ $(Device/kernel-size-migration)
DEVICE_MODEL := EA3500
PAGESIZE := 512
SUBPAGESIZE := 256
BLOCKSIZE := 16k
- KERNEL_SIZE := 2624k
+ KERNEL_SIZE := 3072k
SUPPORTED_DEVICES += linksys,audi linksys-audi
endef
TARGET_DEVICES += linksys_ea3500
define Device/linksys_ea4500
$(Device/linksys)
- $(Device/dsa-migration)
+ $(Device/kernel-size-migration)
DEVICE_MODEL := EA4500
- KERNEL_SIZE := 2688k
+ KERNEL_SIZE := 3072k
SUPPORTED_DEVICES += linksys,viper linksys-viper
endef
TARGET_DEVICES += linksys_ea4500
+define Device/netgear_readynas-duo-v2
+ DEVICE_VENDOR := NETGEAR
+ DEVICE_MODEL := ReadyNAS Duo
+ DEVICE_VARIANT := v2
+ DEVICE_DTS := kirkwood-netgear_readynas_duo_v2
+ KERNEL_IN_UBI :=
+ IMAGES := sysupgrade.bin
+ DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
+ kmod-gpio-button-hotplug kmod-hwmon-g762 kmod-rtc-rs5c372a kmod-usb3
+endef
+TARGET_DEVICES += netgear_readynas-duo-v2
+
define Device/raidsonic_ib-nas62x0
DEVICE_VENDOR := RaidSonic
DEVICE_MODEL := ICY BOX IB-NAS62x0
endef
TARGET_DEVICES += raidsonic_ib-nas62x0
+define Device/seagate_blackarmor-nas220
+ DEVICE_VENDOR := Seagate
+ DEVICE_MODEL := Blackarmor NAS220
+ DEVICE_PACKAGES := kmod-hwmon-adt7475 kmod-fs-ext4 kmod-ata-marvell-sata \
+ mdadm kmod-gpio-button-hotplug
+ PAGESIZE := 512
+ SUBPAGESIZE := 256
+ BLOCKSIZE := 16k
+ UBINIZE_OPTS := -e 1
+endef
+TARGET_DEVICES += seagate_blackarmor-nas220
+
define Device/seagate_dockstar
DEVICE_VENDOR := Seagate
DEVICE_MODEL := FreeAgent Dockstar