ramips: add missing zbt-cpe102 diag led

[openwrt/openwrt.git] / target / linux / ramips / dts / ArcherMR200.dts

diff --git a/target/linux/ramips/dts/ArcherMR200.dts b/target/linux/ramips/dts/ArcherMR200.dts
index 9a8b558e6ff2d83f42c0807bbc093e7fd9baf862..2735d7406163f61fbadbc58e6f39f59d8d36075f 100644 (file)
--- a/target/linux/ramips/dts/ArcherMR200.dts
+++ b/target/linux/ramips/dts/ArcherMR200.dts
@@ -73,8 +73,6 @@
 
        gpio-keys {
                compatible = "gpio-keys";
-               #address-cells = <1>;
-               #size-cells = <0>;
 
                reset {
                        label = "reset";
@@ -99,7 +97,6 @@
                        gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
                };
        };
-
 };
 
 &gpio1 {
@@ -118,39 +115,43 @@
        status = "okay";
 
        m25p80@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;
 
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x20000>;
-                       read-only;
-               };
-
-               partition@20000 {
-                       label = "firmware";
-                       reg = <0x20000 0x7b0000>;
-               };
-
-               rom: partition@7d0000 {
-                       label = "rom";
-                       reg = <0x7d0000 0x10000>;
-                       read-only;
-               };
-
-               partition@7e0000 {
-                       label = "romfile";
-                       reg = <0x7e0000 0x10000>;
-                       read-only;
-               };
-
-               radio: partition@7f0000 {
-                       label = "radio";
-                       reg = <0x7f0000 0x10000>;
-                       read-only;
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x20000>;
+                               read-only;
+                       };
+
+                       partition@20000 {
+                               label = "firmware";
+                               reg = <0x20000 0x7b0000>;
+                       };
+
+                       rom: partition@7d0000 {
+                               label = "rom";
+                               reg = <0x7d0000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@7e0000 {
+                               label = "romfile";
+                               reg = <0x7e0000 0x10000>;
+                               read-only;
+                       };
+
+                       radio: partition@7f0000 {
+                               label = "radio";
+                               reg = <0x7f0000 0x10000>;
+                               read-only;
+                       };
                };
        };
 };
@@ -187,12 +188,11 @@
 
 &pcie {
        status = "okay";
+};
 
-       pcie-bridge {
-               mt76@0,0 {
-                       reg = <0x0000 0 0 0 0>;
-                       device_type = "pci";
-                       mediatek,mtd-eeprom = <&radio 32768>;
-               };
+&pcie0 {
+       mt76@0,0 {
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&radio 32768>;
        };
 };