#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/mtd/partitions/uimage.h>
/ {
compatible = "gpio-leds";
led_power: power {
- label = "white:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
};
wlan {
- label = "blue:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
};
usb {
- label = "blue:usb";
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
trigger-sources = <&ohci_port1>, <&ehci_port1>;
linux,default-trigger = "usbport";
read-only;
};
- factory: partition@40000 {
+ partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eeprom_factory_0: eeprom@0 {
+ reg = <0x0 0x200>;
+ };
+
+ eeprom_factory_8000: eeprom@8000 {
+ reg = <0x8000 0x200>;
+ };
+
+ macaddr_factory_4: macaddr@4 {
+ reg = <0x4 0x6>;
+ };
+ };
};
partition@50000 {
pinctrl-names = "default";
pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
- mtd-mac-address = <&factory 0x4>;
+ nvmem-cells = <&macaddr_factory_4>;
+ nvmem-cell-names = "mac-address";
mediatek,portmap = "wllll";
};
&gsw {
- mediatek,port4 = "gmac";
+ mediatek,ephy-base = /bits/ 8 <12>;
};
&wmac {
- ralink,mtd-eeprom = <&factory 0x0>;
+ nvmem-cells = <&eeprom_factory_0>;
+ nvmem-cell-names = "eeprom";
};
&pcie {
&pcie0 {
wifi@0,0 {
reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- mediatek,2ghz = <0>;
+ nvmem-cells = <&eeprom_factory_8000>;
+ nvmem-cell-names = "eeprom";
+ ieee80211-freq-limit = <5000000 6000000>;
};
};