ramips: add proper system clock and reset driver support for mt7621

[openwrt/openwrt.git] / target / linux / ramips / dts / mt7621_xzwifi_creativebox-v1.dts

diff --git a/target/linux/ramips/dts/mt7621_xzwifi_creativebox-v1.dts b/target/linux/ramips/dts/mt7621_xzwifi_creativebox-v1.dts
index 0db8b3447483fd40b658a76657fea4d4fdd9eba7..32f7e5056a313c6e8352e90af6935e85e821c1aa 100644 (file)
--- a/target/linux/ramips/dts/mt7621_xzwifi_creativebox-v1.dts
+++ b/target/linux/ramips/dts/mt7621_xzwifi_creativebox-v1.dts
@@ -1,5 +1,4 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
 
 #include "mt7621.dtsi"
 
@@ -25,29 +24,29 @@
                compatible = "gpio-leds";
 
                power {
-                       label = "creativebox-v1:blue:power";
+                       label = "blue:power";
                        gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
                        default-state = "on";
                };
 
                led_sys: sys {
-                       label = "creativebox-v1:blue:sys";
+                       label = "blue:sys";
                        gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
                };
 
                internet {
-                       label = "creativebox-v1:blue:internet";
+                       label = "blue:internet";
                        gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
                };
 
                wlan2g {
-                       label = "creativebox-v1:blue:wlan2g";
+                       label = "blue:wlan2g";
                        gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
                        linux,default-trigger = "phy0tpt";
                };
 
                wlan5g {
-                       label = "creativebox-v1:blue:wlan5g";
+                       label = "blue:wlan5g";
                        gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
                        linux,default-trigger = "phy1tpt";
                };
@@ -153,8 +152,13 @@
        };
 };
 
+&ethernet {
+       pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>;
+};
+
 &gmac0 {
-       mtd-mac-address = <&factory 0xe000>;
+       nvmem-cells = <&macaddr_factory_e000>;
+       nvmem-cell-names = "mac-address";
 };
 
 &switch0 {
@@ -182,8 +186,9 @@
                port@4 {
                        status = "okay";
                        label = "wan";
-                       mtd-mac-address = <&factory 0xe000>;
-                       mtd-mac-address-increment = <1>;
+                       nvmem-cells = <&macaddr_factory_e000>;
+                       nvmem-cell-names = "mac-address";
+                       mac-address-increment = <1>;
                };
        };
 };
@@ -194,3 +199,13 @@
                function = "gpio";
        };
 };
+
+&factory {
+       compatible = "nvmem-cells";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       macaddr_factory_e000: macaddr@e000 {
+               reg = <0xe000 0x6>;
+       };
+};