ramips: add proper system clock and reset driver support for mt7621

[openwrt/openwrt.git] / target / linux / ramips / dts / mt7628an_zyxel_keenetic-extra-ii.dts

diff --git a/target/linux/ramips/dts/mt7628an_zyxel_keenetic-extra-ii.dts b/target/linux/ramips/dts/mt7628an_zyxel_keenetic-extra-ii.dts
index 47e4b429a918bc6896dc3c305febd8c377148cf6..c53289debf0934971c0d4a214c72ddc55e4db10b 100644 (file)
--- a/target/linux/ramips/dts/mt7628an_zyxel_keenetic-extra-ii.dts
+++ b/target/linux/ramips/dts/mt7628an_zyxel_keenetic-extra-ii.dts
@@ -46,7 +46,6 @@
                led_power: power {
                        label = "green:power";
                        gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
-                       default-state = "keep";
                };
 
                internet {
@@ -77,6 +76,23 @@
                        gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
                };
        };
+
+       virtual_flash {
+               compatible = "mtd-concat";
+               devices = <&firmware1 &firmware2>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x0 0x1d20000>;
+                       };
+               };
+       };
 };
 
 &spi0 {
@@ -85,7 +101,7 @@
        flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
-               spi-max-frequency = <10000000>;
+               spi-max-frequency = <32000000>;
 
                partitions {
                        compatible = "fixed-partitions";
@@ -105,14 +121,13 @@
                        };
 
                        factory: partition@40000 {
-                               label = "factory";
+                               label = "rf-eeprom";
                                reg = <0x40000 0x10000>;
                                read-only;
                        };
 
-                       partition@50000 {
-                               compatible = "denx,uimage";
-                               label = "firmware";
+                       firmware1: partition@50000 {
+                               label = "firmware_1";
                                reg = <0x50000 0xe90000>;
                        };
 
@@ -152,10 +167,9 @@
                                read-only;
                        };
 
-                       partition@1050000 {
+                       firmware2: partition@1050000 {
                                label = "firmware_2";
                                reg = <0x1050000 0xe90000>;
-                               read-only;
                        };
 
                        partition@1ee0000 {
@@ -167,16 +181,9 @@
        };
 };
 
-&ehci {
-       status = "okay";
-};
-
-&ohci {
-       status = "okay";
-};
-
 &ethernet {
-       mtd-mac-address = <&factory 0x4>;
+       nvmem-cells = <&macaddr_factory_4>;
+       nvmem-cell-names = "mac-address";
 };
 
 &esw {
@@ -185,6 +192,8 @@
 
 &wmac {
        status = "okay";
+
+       mediatek,mtd-eeprom = <&factory 0x0>;
 };
 
 &pcie {
@@ -193,6 +202,7 @@
 
 &pcie0 {
        mt76@0,0 {
+               compatible = "mediatek,mt76";
                reg = <0x0000 0 0 0 0>;
                mediatek,mtd-eeprom = <&factory 0x8000>;
                ieee80211-freq-limit = <5000000 6000000>;
@@ -205,3 +215,13 @@
                function = "gpio";
        };
 };
+
+&factory {
+       compatible = "nvmem-cells";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       macaddr_factory_4: macaddr@4 {
+               reg = <0x4 0x6>;
+       };
+};