ramips: add proper system clock and reset driver support for mt7621

[openwrt/openwrt.git] / target / linux / ramips / dts / rt5350_trendnet_tew-714tru.dts

diff --git a/target/linux/ramips/dts/rt5350_trendnet_tew-714tru.dts b/target/linux/ramips/dts/rt5350_trendnet_tew-714tru.dts
index 489884aea8f195e344a7002c9af8ca42637405b6..a03f33f3fc129f4e02fa07263d11d4273284e987 100644 (file)
--- a/target/linux/ramips/dts/rt5350_trendnet_tew-714tru.dts
+++ b/target/linux/ramips/dts/rt5350_trendnet_tew-714tru.dts
@@ -1,5 +1,3 @@
-/dts-v1/;
-
 #include "rt5350.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
@@ -13,14 +11,14 @@
                compatible = "gpio-leds";
 
                usb {
-                       label = "tew-714tru:red:usb";
+                       label = "red:usb";
                        gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
                        trigger-sources = <&ohci_port1>, <&ehci_port1>;
                        linux,default-trigger = "usbport";
                };
 
                wifi {
-                       label = "tew-714tru:green:wifi";
+                       label = "green:wifi";
                        gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
                };
        };
@@ -61,7 +59,7 @@
 &spi0 {
        status = "okay";
 
-       m25p80@0 {
+       flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;
@@ -106,7 +104,8 @@
 };
 
 &ethernet {
-       mtd-mac-address = <&factory 0x4>;
+       nvmem-cells = <&macaddr_factory_4>;
+       nvmem-cell-names = "mac-address";
 };
 
 &esw {
@@ -118,10 +117,12 @@
        ralink,mtd-eeprom = <&factory 0x0>;
 };
 
-&ehci {
-       status = "okay";
-};
+&factory {
+       compatible = "nvmem-cells";
+       #address-cells = <1>;
+       #size-cells = <1>;
 
-&ohci {
-       status = "okay";
+       macaddr_factory_4: macaddr@4 {
+               reg = <0x4 0x6>;
+       };
 };