packages/network/utils/wpan-tools: Update to 0.7
[openwrt/openwrt.git] / target / linux / lantiq / dts /
2016-10-15 Mathias Kresinlantiq: fix ARV452CQW keys
2016-10-05 Mathias Kresinlantiq: fixup last commits
2016-10-05 Mathias Kresinlantiq: fix usb leds/trigger
2016-10-05 Mathias Kresinlantiq: use aliases device tree node for leds
2016-09-10 Mathias Kresinlantiq: enable cpu temp driver for more tested boards
2016-08-15 Martin Schillerlantiq/xrx200-net: add interrupt for second DMA TX...
2016-08-10 Mathias Kresinlantiq: enable cpu temp driver for selected boards
2016-08-10 Mathias Kresinlantiq: use the etop driver DT bindings only
2016-08-10 Mathias Kresinlantiq: fix mac address increments
2016-08-10 Mathias Kresinlantiq: use ath, eep-flash/mac-offset for ath eep nodes
2016-07-28 Hauke Mehrtenslantiq: fix switch configuration for EASY80920
2016-07-05 Ben Mulvihilllantiq: mac address setting on BTHOMEHUBV3A
2016-06-22 Oswald Buddenhagenlantiq: add support for ARV7506PW11 (Alice/O2 IAD 4421)
2016-06-22 Daniel Gimpelevichlantiq: Slow down SPI flash on the DGN3500
2016-06-22 John Crispinlantiq: remove gr7000 support
2016-06-21 Hauke Mehrtenslantiq: make EASY80920 work with both chip versions
2016-06-21 Hauke Mehrtenslantiq: use new partition layout for EASY80920NAND
2016-06-20 Mathias Kresinlantiq: BTHOMEHUBV5A - use the power event code for...
2016-06-14 John Crispinlantiq: fix fritz7320 wifi support
2016-06-13 John Crispinlantiq: fix ARV452CQW button gpio setup
2016-06-13 John Crispinlantiq: Add Support for Fritz!Box 7360 SL
2016-06-13 John Crispinlantiq: use new property name for eiu irqs
2016-06-11 Felix Fietkaulantiq: add Buffalo WBMR-300HPD support
2016-05-27 Daniel Gimpelevichkernel: remove a hack that was obsoleted upstream
2016-05-27 Daniel Gimpelevichlantiq: Use the correct SPI flash speed for the Netgear...
2016-05-27 Mathias Kresinlantiq: VGV7510KW22 - enable the IP101A phy
2016-05-27 Mathias Kresinlantiq: VGV7510KW22 - fix pinmux configuration
2016-05-27 Mathias Kresinlantiq: VGV7519 - fix brn partition layout
2016-05-27 Mathias Kresinlantiq: VGV7519 - get mac address from board_config...
2016-05-27 Mathias Kresinlantiq: VGV7519 - add vlan support
2016-05-27 Mathias Kresinlantiq: VGV7519 - add second usb port
2016-05-27 Mathias Kresinlantiq: VGV7519 - cleanup pinmux configuration
2016-05-27 Mathias Kresinlantiq: VGV7519 - remove/merge redundant parts in dts
2016-05-24 John Crispinlantiq: fix regression in VG3503J.dts
2016-05-23 Mathias Kresinlantiq: VG3503J - use the 11G firmware
2016-05-23 Mathias Kresinlantiq: VG3503J - merge profiles
2016-05-10 blogiclantiq: VGV7510KW22BRN - set the phy clock source
2016-05-10 blogiclantiq: VGV7510KW22BRN - support dual-image
2016-05-10 blogiclantiq: move partitions into partion table node
2016-05-10 blogiclantiq: VG3503J - use the same PHY led functionality...
2016-05-10 blogiclantiq: use the same functionality for all ethernet...
2016-04-26 John Crispinlantiq: remove read-only flag on two partitions on...
2016-02-08 John Crispinlantiq: VGV7510KW22/VGV7519 update spi pinmux group
2016-02-08 John Crispinlantiq: BTHOMEHUBV5A - explicit select the flash device
2016-01-29 Felix Fietkaulantiq: Make the ar9.dtsi sram node match "simple-bus"
2016-01-29 Felix Fietkaulantiq: Move the definition of the xrx200-net node...
2016-01-18 Hauke Mehrtenslantiq: add support for TP-Link VR200v
2016-01-17 Felix Fietkaulantiq: Remove incorrect PCIe compatible strings
2016-01-17 Felix Fietkaulantiq: Switch to the new SPI driver
2016-01-17 Felix Fietkaulantiq: Enable the hardware SPI driver on the DGN3500...
2016-01-17 Felix Fietkaulantiq: Enable SPI for the EASY80920 board again
2016-01-17 Felix Fietkaulantiq: Switch FRITZ3370 from spi-gpio to the hardware...
2016-01-17 Felix Fietkaulantiq: Re-use the SPI node from vr9.dtsi in TDW89X0...
2016-01-17 Felix Fietkaulantiq: Add the SPI node to ar9.dtsi and vr9.dtsi
2016-01-17 Felix Fietkaulantiq: Configure the PCIe reset GPIO using OF
2016-01-17 Felix Fietkaulantiq: Use the new pinctrl compatible strings
2016-01-01 John Crispinlantiq: Add the xbar to vr9.dts
2016-01-01 John Crispinlantiq: TDW8980 - use devicename:colour:function led...
2016-01-01 John Crispinlantiq: P2812HNUFX - move usb leds to P2812HNU-F1
2016-01-01 John Crispinlantiq: use devicename:colour:function led naming scheme
2016-01-01 John Crispinlantiq: add support for indicating the boot state using...
2016-01-01 John Crispinlantiq: use dsl led defined in DTS
2016-01-01 John Crispinlantiq: define default leds in dts files
2016-01-01 John Crispinlantiq: ARV752DPW - fix dts file
2016-01-01 John Crispinlantiq: ARV752DPW22 - fix dts file
2016-01-01 John Crispinlantiq: DGN1000B - fix typo in dts file
2016-01-01 John Crispinlantiq: ARV4518PWR01* move redundant parts to dtsi
2016-01-01 John Crispinlantiq: P2812HNUFX - move leds to dtsi
2015-12-23 John Crispinlantiq: TDW89x0 - increase spi frequency
2015-12-23 John Crispinlantiq: Configure LED polarity for TDW8970 and TDW8980.
2015-12-17 John Crispinlantiq: fix ARV7519RW22 buttons
2015-12-17 John Crispinlantiq: add the TDW8980 5GHz led
2015-12-17 John Crispinlantiq: Configure LED polarity for TDW8970.
2015-12-17 John Crispinlantiq: Configure disabled WLAN bands for TDW89X0.
2015-12-05 Felix Fietkaulantiq: get rid of the dsl_fw mtd partition
2015-12-04 Felix Fietkaulantiq: re-enable spi-xway for TD-W89X0 now that it...
2015-12-02 Felix Fietkaulantiq: fix up m25p80 device ids (#20975)
2015-10-19 John CrispinRevert "lantiq: activate spi-xway on TDW89X0"
2015-10-07 John Crispinlantiq: activate spi-xway on TDW89X0
2015-10-05 John Crispinlantiq: several ARV7519RW22 fixes
2015-10-05 John Crispinlantiq: Add target TP-Link TD-W8980
2015-09-14 John Crispinlantiq: Introduce DWC2 compatible DTS definitions for...
2015-07-07 John Crispinlantiq: Add support for Arcadyan ARV8539PW22 (Speedport...
2015-07-07 John Crispinlantiq: Add support for the BT Home Hub 5A
2015-07-07 John Crispinlantiq: Make the MEI address available for kernel drivers
2015-06-05 John Crispinlantiq: Add support for Arcadyan VGV7510KW22 (known...
2015-06-01 Jonas Gorskilantiq: fix VG3503J rootfs offset
2015-03-11 John Crispinlantiq: Convert Zyxel P-2812HNU-FX and TP-Link TD-W8970...
2015-02-13 John Crispinlantiq: fix DGN3500 root device
2015-02-11 John Crispinlantiq: fix VG3503J partition table for newer kernels
2015-02-09 John Crispinlantiq: td-w8970: fix reset button
2015-02-09 John Crispinlantiq: add 3.18 support
2015-01-18 John Crispinlantiq: DGN3500 cleanups
2015-01-17 John CrispinRemove old P2812HNUFX dts
2015-01-17 John Crispinlantiq: Add device tree for P2812HNUF1 and P2812HNUF3
2015-01-08 John Crispinlantiq: BT Home Hub3A - device tree
2014-10-29 John Crispinlantiq: vgv7519: fix board_config on dts, read mac...
2014-10-26 John Crispinvgv7519: support more recent board release with vrx288...
2014-10-14 John Crispinlantiq: allow pcie to be disabled by dts + vgv7519...
2014-10-06 John Crispinlantiq - vgv7519: load rt5362 eeprom from bootloader...
next