openwrt/staging/lynxis/omap.git
7 years agomac80211: fix ath9k kernel crash with linux 4.9
Felix Fietkau [Tue, 7 Feb 2017 10:36:31 +0000 (11:36 +0100)]
mac80211: fix ath9k kernel crash with linux 4.9

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agoar71xx/ipq806x/mediatek/mvebu: fix network defaults
Jo-Philipp Wich [Tue, 7 Feb 2017 07:55:46 +0000 (08:55 +0100)]
ar71xx/ipq806x/mediatek/mvebu: fix network defaults

After "73d923e base-files: emit tagged switch configuration by default"
some default network configurations are broken because the lan and wan
ifnames are forcibly set to untagged netdevs.

Adjust the offending set_interfaces_lan_wan() calls to use the proper
tagged device names.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years agoarc770: fix broken upstream change
Jo-Philipp Wich [Tue, 7 Feb 2017 08:30:41 +0000 (09:30 +0100)]
arc770: fix broken upstream change

Add a patch to revert upstream commit 9aed02feae57bf7a40cb04ea0e3017cb7a998db4
which introduces syntax errors.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years agotcpdump: update to version 4.9.0
Hauke Mehrtens [Sun, 5 Feb 2017 12:00:38 +0000 (13:00 +0100)]
tcpdump: update to version 4.9.0

This fixes the following 41 security problems:
 + CVE-2016-7922: buffer overflow in print-ah.c:ah_print().
 + CVE-2016-7923: buffer overflow in print-arp.c:arp_print().
 + CVE-2016-7924: buffer overflow in print-atm.c:oam_print().
 + CVE-2016-7925: buffer overflow in print-sl.c:sl_if_print().
 + CVE-2016-7926: buffer overflow in print-ether.c:ethertype_print().
 + CVE-2016-7927: buffer overflow in print-802_11.c:ieee802_11_radio_print().
 + CVE-2016-7928: buffer overflow in print-ipcomp.c:ipcomp_print().
 + CVE-2016-7929: buffer overflow in print-juniper.c:juniper_parse_header().
 + CVE-2016-7930: buffer overflow in print-llc.c:llc_print().
 + CVE-2016-7931: buffer overflow in print-mpls.c:mpls_print().
 + CVE-2016-7932: buffer overflow in print-pim.c:pimv2_check_checksum().
 + CVE-2016-7933: buffer overflow in print-ppp.c:ppp_hdlc_if_print().
 + CVE-2016-7934: buffer overflow in print-udp.c:rtcp_print().
 + CVE-2016-7935: buffer overflow in print-udp.c:rtp_print().
 + CVE-2016-7936: buffer overflow in print-udp.c:udp_print().
 + CVE-2016-7937: buffer overflow in print-udp.c:vat_print().
 + CVE-2016-7938: integer overflow in print-zeromq.c:zmtp1_print_frame().
 + CVE-2016-7939: buffer overflow in print-gre.c, multiple functions.
 + CVE-2016-7940: buffer overflow in print-stp.c, multiple functions.
 + CVE-2016-7973: buffer overflow in print-atalk.c, multiple functions.
 + CVE-2016-7974: buffer overflow in print-ip.c, multiple functions.
 + CVE-2016-7975: buffer overflow in print-tcp.c:tcp_print().
 + CVE-2016-7983: buffer overflow in print-bootp.c:bootp_print().
 + CVE-2016-7984: buffer overflow in print-tftp.c:tftp_print().
 + CVE-2016-7985: buffer overflow in print-calm-fast.c:calm_fast_print().
 + CVE-2016-7986: buffer overflow in print-geonet.c, multiple functions.
 + CVE-2016-7992: buffer overflow in print-cip.c:cip_if_print().
 + CVE-2016-7993: a bug in util-print.c:relts_print() could cause a
      buffer overflow in multiple protocol parsers (DNS, DVMRP, HSRP, IGMP,
      lightweight resolver protocol, PIM).
 + CVE-2016-8574: buffer overflow in print-fr.c:frf15_print().
 + CVE-2016-8575: buffer overflow in print-fr.c:q933_print().
 + CVE-2017-5202: buffer overflow in print-isoclns.c:clnp_print().
 + CVE-2017-5203: buffer overflow in print-bootp.c:bootp_print().
 + CVE-2017-5204: buffer overflow in print-ip6.c:ip6_print().
 + CVE-2017-5205: buffer overflow in print-isakmp.c:ikev2_e_print().
 + CVE-2017-5341: buffer overflow in print-otv.c:otv_print().
 + CVE-2017-5342: a bug in multiple protocol parsers (Geneve, GRE, NSH,
      OTV, VXLAN and VXLAN GPE) could cause a buffer overflow in
      print-ether.c:ether_print().
 + CVE-2017-5482: buffer overflow in print-fr.c:q933_print().
 + CVE-2017-5483: buffer overflow in print-snmp.c:asn1_parse().
 + CVE-2017-5484: buffer overflow in print-atm.c:sig_print().
 + CVE-2017-5485: buffer overflow in addrtoname.c:lookup_nsap().
 + CVE-2017-5486: buffer overflow in print-isoclns.c:clnp_print().

The size of the package is only incread very little:
new size:
306430 tcpdump_4.9.0-1_mips_24kc.ipk
130324 tcpdump-mini_4.9.0-1_mips_24kc.ipk

old size:
302782 tcpdump_4.8.1-1_mips_24kc.ipk
129033 tcpdump-mini_4.8.1-1_mips_24kc.ipk

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
7 years agobrcm2708-gpu-fw: update to latest version
Álvaro Fernández Rojas [Mon, 6 Feb 2017 16:17:23 +0000 (17:17 +0100)]
brcm2708-gpu-fw: update to latest version

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
7 years agobrcm2708: update linux 4.4 patches to latest version
Álvaro Fernández Rojas [Mon, 6 Feb 2017 16:12:09 +0000 (17:12 +0100)]
brcm2708: update linux 4.4 patches to latest version
n
As usual these patches were extracted and rebased from the raspberry pi repo:
https://github.com/raspberrypi/linux/tree/rpi-4.4.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
7 years agobcm53xx: set Netgear R8000 USB LEDs
Rafał Miłecki [Mon, 6 Feb 2017 19:23:48 +0000 (20:23 +0100)]
bcm53xx: set Netgear R8000 USB LEDs

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agobcm53xx: refresh Linux 4.4 config
Rafał Miłecki [Mon, 6 Feb 2017 16:20:59 +0000 (17:20 +0100)]
bcm53xx: refresh Linux 4.4 config

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agobcm53xx: image: use one style of adding TARGET_DEVICES entries
Rafał Miłecki [Mon, 6 Feb 2017 12:58:47 +0000 (13:58 +0100)]
bcm53xx: image: use one style of adding TARGET_DEVICES entries

It just makes code consistent. This trivial change may be a 17.01
candidate to provide simpler backporting experience.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agokernel: merge b53 API patch with the one handling all switch drivers
Rafał Miłecki [Mon, 6 Feb 2017 12:39:19 +0000 (13:39 +0100)]
kernel: merge b53 API patch with the one handling all switch drivers

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agoRevert "uClibc-ng: update to 1.0.21"
Jo-Philipp Wich [Mon, 6 Feb 2017 12:02:51 +0000 (13:02 +0100)]
Revert "uClibc-ng: update to 1.0.21"

This reverts commit dde5c729ec92cbb11cf6367d93887e634b0ac756.

The uClibc update was completely untested, does not build with Kernel 4.4 and
did not adjust the configuration to predeclare new config symbols.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years agomac80211: update to wireless-testing 2017-01-31
Felix Fietkau [Thu, 2 Feb 2017 11:02:22 +0000 (12:02 +0100)]
mac80211: update to wireless-testing 2017-01-31

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agokernel: add missing config symbols for 4.9
Felix Fietkau [Mon, 6 Feb 2017 10:46:16 +0000 (11:46 +0100)]
kernel: add missing config symbols for 4.9

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agokernel: fix crashlog build error on 4.9
Felix Fietkau [Mon, 6 Feb 2017 10:41:23 +0000 (11:41 +0100)]
kernel: fix crashlog build error on 4.9

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agokernel: add compile fix for linux 4.9 on x86
Felix Fietkau [Mon, 6 Feb 2017 09:35:19 +0000 (10:35 +0100)]
kernel: add compile fix for linux 4.9 on x86

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agokernel: port b53 to use kernel 4.5+ API
Rafał Miłecki [Mon, 6 Feb 2017 10:28:54 +0000 (11:28 +0100)]
kernel: port b53 to use kernel 4.5+ API

For backward 4.4 compatibility I added patch reverting my changes.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agobcm53xx: move bcm47xx_sprom driver to 4.4 specific directory
Rafał Miłecki [Mon, 6 Feb 2017 09:18:20 +0000 (10:18 +0100)]
bcm53xx: move bcm47xx_sprom driver to 4.4 specific directory

In kernel 4.9 it's already present so we don't want to overwite it (with
older & API incompatible version).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agobcm53xx: add Linux 4.9 patches
Rafał Miłecki [Mon, 6 Feb 2017 09:06:44 +0000 (10:06 +0100)]
bcm53xx: add Linux 4.9 patches

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agobcm53xx: backport upstream DTS files for Linksys devices
Rafał Miłecki [Mon, 6 Feb 2017 07:43:01 +0000 (08:43 +0100)]
bcm53xx: backport upstream DTS files for Linksys devices

We dont't build officialy images for them yet due to partitioning
issues.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agokernel: update kernel 4.4 to version 4.4.47
Stijn Tintel [Mon, 6 Feb 2017 01:47:54 +0000 (02:47 +0100)]
kernel: update kernel 4.4 to version 4.4.47

Refresh patches for all targets that support kernel 4.4.
Compile-tested on all targets that use kernel 4.4 and aren't marked
broken, except arc770 and arch38 due to broken toolchain.

Runtime-tested on ar71xx, octeon, ramips and x86/64.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
7 years agodnsmasq: update to dnsmasq 2.77test1
Kevin Darbyshire-Bryant [Thu, 2 Feb 2017 16:07:03 +0000 (16:07 +0000)]
dnsmasq: update to dnsmasq 2.77test1

Bump to dnsmasq 2.77test1 - this includes a number of fixes since 2.76
and allows dropping of 2 LEDE carried patches.

Notable fix in rrfilter code when talking to Nominum's DNS servers
especially with DNSSEC.

A patch to switch dnsmasq back to 'soft fail' for SERVFAIL responses
from dns servers is also included.  This mean dnsmasq tries all
configured servers before giving up.

A 'localise queries' enhancement has also been backported (it will
appear in test2/rc'n') this is especially important if using the
recently imported to LEDE 'use dnsmasq standalone' feature 9525743c

I have been following dnsmasq HEAD ever since 2.76 release.
Compile & Run tested: ar71xx, Archer C7 v2

Tested-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
7 years agodnsmasq: fix instances in dhcp_add()
Eric Luehrsen [Sat, 4 Feb 2017 06:51:59 +0000 (01:51 -0500)]
dnsmasq: fix instances in dhcp_add()

ref commit 9525743c076393336cd2129539c974f8a01c7894
dnsmasq: make DHCPv6 viable for standalone dnsmasq install
Above commit broke instancing by missing filter_dnsmasq()
as part of the dhcp_add() execution.

Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
7 years agoramips: add support for Sanlinking D240
Kristian Evensen [Sat, 4 Feb 2017 20:28:52 +0000 (21:28 +0100)]
ramips: add support for Sanlinking D240

The Sanlinking Technologies D240
(http://www.sanlinking.com/en/29-dual-4g-wifi-router.html) is basically the same
device as the ZBT WE826, so adding support for it in LEDE is straight forward.
The differences is that the D240 has two mini-PCIe slots (instead of one), blue
LEDs and supports PoE.

Specification:
* CPU: MT7620A
* 1x 10/100Mbps POE (802.3af/802.3at) Ethernet, 4x 10/100Mbps.
* 16 MB Flash.
* 128 MB RAM.
* 1x USB 2.0 port.
* 2x mini-PCIe slots.
* 2x SIM slots.
* 1x 2.4Ghz WIFI.
* 1x button.

Wifi, USB, switch and both mini-PCIe slots are working. I have not been able to
test the SD card reader.

The device comes pre-installed with an older version of OpenWRT, including Luci.
In order to install LEDE, you need to follow the existing procedure for updating
OpenWRT/LEDE using Luci. I.e., you need to access the UI and update the firmware
using the sysupgrade-image. Remember to select that you do not want to keep
existing settings. The default router address is 192.168.10.1 and
username/password admin/root (at least on my devices).

If you brick the device, the procedure for recovery is the same as for the
WE826. Please see the wiki page for that device for instructions.

Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
7 years agobuild: add missing wildcard for ignoring .pkgdir in dependency checks
Felix Fietkau [Sun, 5 Feb 2017 21:17:24 +0000 (22:17 +0100)]
build: add missing wildcard for ignoring .pkgdir in dependency checks

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agodnsmasq: honor quietdhcp option for DHCPv6
Arjen de Korte [Fri, 3 Feb 2017 10:13:59 +0000 (11:13 +0100)]
dnsmasq: honor quietdhcp option for DHCPv6

Do not spam the syslog with DHCPv6 lease info if quietdhcp option
is selected. This already works for DHCPv4, make it work in the same
way for DHCPv6.

Signed-off-by: Arjen de Korte <build+lede@de-korte.org>
[Originally written by Arjen de Korte on GitHub but had issues providing
a SoB in correct format.]
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
7 years agokernel: add linux 4.9 support
Felix Fietkau [Fri, 27 Jan 2017 13:32:10 +0000 (14:32 +0100)]
kernel: add linux 4.9 support

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Tim Harvey <tharvey@gateworks.com> [fixes]
7 years agobuild: centralize fakeroot code
Joseph C. Lehner [Fri, 27 Jan 2017 15:10:40 +0000 (16:10 +0100)]
build: centralize fakeroot code

This patch moves the fakeroot code required by some devices to
`image-commands.mk`.

Create the fakeroot on the fly by using the undocumented -s (skip copy)
parameter of mkimage.

Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
[remove unused NETGEAR_KERNEL_MAGIC, remove workarounds to have a dummy
rootfs for mkimage]
Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years agoramips: fix Airlink AR725W device title
Mathias Kresin [Sat, 4 Feb 2017 11:55:16 +0000 (12:55 +0100)]
ramips: fix Airlink AR725W device title

Gemtek is the ODM but the board was sold by Airlink101.

Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years agoramips: fix Airlink AR725W factory image build
Mathias Kresin [Sat, 4 Feb 2017 10:02:36 +0000 (11:02 +0100)]
ramips: fix Airlink AR725W factory image build

The factory image can't be bigger than 3328 KByte. If the image is
bigger than that, the gemtek-header tool throws an error and breaks
the build.

Make sure the output file to which the gemtek header should be added
exists and wasn't removed during the check-size step because of it
size. This will prevent hard errors in case the factory image is to big
similar to what is done for sysupgrade images.

Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years agoubus: update to the latest version
Felix Fietkau [Sat, 4 Feb 2017 09:42:06 +0000 (10:42 +0100)]
ubus: update to the latest version

Adds the following fixes:

91acde6 libubus: do not modify uloop_cancelled
763b9b2 libubus: reset ctx->sock.eof to fix reconnect issues

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agolibubox: update to the latest version
Felix Fietkau [Fri, 3 Feb 2017 15:54:46 +0000 (16:54 +0100)]
libubox: update to the latest version

Adds the following changes:

de3f14b uloop: add uloop_cancelling function
3b6181b utils: fix build on Mac OS X 10.12
7f671b1 blobmsg: add support for double
0fe1374 utils: add helper functions useful for allocating a ring buffer
8fc1c30 libubox: replace strtok with _r version.
4a9f74f libubox: allow reading out the pid of uloop process in lua
372e1e6 uloop: remove useless epoll data assignment
f9db1cb libubox: allow reading out the remaining time of a uloop timer in Lua

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agomt76: update to the latest version, fixes a MAC address handling regression
Felix Fietkau [Fri, 3 Feb 2017 13:27:19 +0000 (14:27 +0100)]
mt76: update to the latest version, fixes a MAC address handling regression

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agoipq806x: fix wireless macs
Hannu Nyman [Fri, 3 Feb 2017 13:10:57 +0000 (15:10 +0200)]
ipq806x: fix wireless macs

Commit 71a39b8 ("ipq806x: Fix wireless support for Netgear Nighthawk X4S
D7800") added a trailing TAB char after the backslash which prevents
the assignment of the correct MACs for wifi devices.

Fixes: FS#451
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
[reworded commit message]
Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years agokernel: update phy drivers for 4.9
Felix Fietkau [Thu, 2 Feb 2017 13:36:50 +0000 (14:36 +0100)]
kernel: update phy drivers for 4.9

add backport patches for older kernels

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agokernel: update mtdsplit for linux 4.9
Felix Fietkau [Wed, 1 Feb 2017 07:06:10 +0000 (08:06 +0100)]
kernel: update mtdsplit for linux 4.9

add backport patches for older kernels

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agoacx-mac80211: fix scan API error that could lead to a crash
Felix Fietkau [Fri, 27 Jan 2017 10:11:00 +0000 (11:11 +0100)]
acx-mac80211: fix scan API error that could lead to a crash

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agobcm53xx: set WAN MAC address to don't share one with LAN interface
Rafał Miłecki [Wed, 1 Feb 2017 15:45:19 +0000 (16:45 +0100)]
bcm53xx: set WAN MAC address to don't share one with LAN interface

After analyzing numerous NVRAMs and vendor firmwares it seems the base
MAC address is used for LAN interface. WAN interface has different one
which sometimes is set directly in NVRAM and sometines needs to be
calculated.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agoar71xx: image: fix DEVICE_TITLE for several devices
Piotr Dymacz [Tue, 31 Jan 2017 21:26:39 +0000 (22:26 +0100)]
ar71xx: image: fix DEVICE_TITLE for several devices

Be consistent with form and format of the vendor names.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
7 years agoar71xx: fix indentation in Kconfig.openwrt
Piotr Dymacz [Sun, 29 Jan 2017 13:32:19 +0000 (14:32 +0100)]
ar71xx: fix indentation in Kconfig.openwrt

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
7 years agoar71xx: drop help sections from Kconfig.openwrt
Piotr Dymacz [Sun, 29 Jan 2017 13:27:57 +0000 (14:27 +0100)]
ar71xx: drop help sections from Kconfig.openwrt

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
7 years agoar71xx: fix up mikrotik subtarget kernel config
Piotr Dymacz [Fri, 27 Jan 2017 20:39:31 +0000 (21:39 +0100)]
ar71xx: fix up mikrotik subtarget kernel config

Disable all devices which do not belong to the mikrotik subtarget.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
7 years agoar71xx: fix up nand subtarget kernel config
Piotr Dymacz [Fri, 27 Jan 2017 15:42:37 +0000 (16:42 +0100)]
ar71xx: fix up nand subtarget kernel config

Disable all devices which do not belong to the nand subtarget.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
7 years agoar71xx: select ATH79_NVRAM only by boards actually use it
Piotr Dymacz [Fri, 27 Jan 2017 14:50:35 +0000 (15:50 +0100)]
ar71xx: select ATH79_NVRAM only by boards actually use it

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
7 years agort5350: added pcm interface in .dtsi
Giuseppe Lippolis [Sun, 29 Jan 2017 19:39:40 +0000 (20:39 +0100)]
rt5350: added pcm interface in .dtsi

Added the missing audio pcm interface in the .dtsi file for the rt5350
device. The update has been verified from the data get from the datasheet
and is very similar to the mt7620a.dtsi

Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
7 years agoopenvpn: adding key_direction to append_params.
Brandon Koepke [Thu, 2 Feb 2017 17:51:05 +0000 (09:51 -0800)]
openvpn: adding key_direction to append_params.

key_direction shows up as an openvpn option in the user-interface but does not end up in the /var/etc/openvpn*.conf file. Adding it to the list here fixed the issue for me.

Signed-off-by: Brandon Koepke <bdkoepke@fastmail.com>
7 years agogeneric: rtl8366rb: fix compatible string
Mathias Kresin [Thu, 2 Feb 2017 21:42:25 +0000 (22:42 +0100)]
generic: rtl8366rb: fix compatible string

Use a vendor prefix as it has to be for all not core driver. Update the
compatible string in the device tree files accordingly.

Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years agoramips: fix Sercomm NA930 compatible string
Mathias Kresin [Thu, 2 Feb 2017 21:35:59 +0000 (22:35 +0100)]
ramips: fix Sercomm NA930 compatible string

The Sercomm NA930 is not a mt7620a evaluation board and shouldn't use
the eval board compatible string.

Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years agoramips: remove Planex CS-QR10 sound device tree node
Mathias Kresin [Thu, 2 Feb 2017 21:34:53 +0000 (22:34 +0100)]
ramips: remove Planex CS-QR10 sound device tree node

The comptible string is neither added by any LEDE patch nor exists in
in the kernel. Drop the sound node which was obviously added
accidentally with 9195d8da ("ramips: DTS rework").

Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years agoramips: cleanup SPI flash device tree properties usage
Mathias Kresin [Thu, 2 Feb 2017 21:11:23 +0000 (22:11 +0100)]
ramips: cleanup SPI flash device tree properties usage

Use only the jedec,spi-nor compatible string. Everything else either
never worked or is only support to keep compatibility.

Remove the linux,modalias property. It is obsolete since kernel 4.4.

Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years agogeneric: mtd: update settings of mx25u3235f
André Valentin [Wed, 1 Feb 2017 21:08:51 +0000 (22:08 +0100)]
generic: mtd: update settings of mx25u3235f

This patch enabled 4K, dual and quad read. Settings have been verified with
a real device.

Signed-off-by: André Valentin <avalentin@marcant.net>
7 years agoipq806x: fixup nbg6817 internal mmc and switch configuration in DTS
André Valentin [Thu, 2 Feb 2017 11:05:32 +0000 (12:05 +0100)]
ipq806x: fixup nbg6817 internal mmc and switch configuration in DTS

The setting mmc-ddr-1_8v in the platform dts leads to read errors. The
device is unusable and system reboots in a loop. Because NBG6817 is the
only mmc device, I removed it in base dts.

The second change removes settings now present in base dts.

The third change references was a wrong conversion of constants in the switch settings.
Switch now initializes again.

Signed-off-by: André Valentin <avalentin@marcant.net>
7 years agokernel: bump to 4.4.46
Koen Vandeputte [Wed, 1 Feb 2017 16:02:21 +0000 (17:02 +0100)]
kernel: bump to 4.4.46

Refreshed patches for all supported targets.

Compile-tested on ar71xx, cns3xxx, imx6, mt7621, oxnas and x86/64.
Run-tested on ar71xx, cns3xxx, imx6 and mt7621.

Tested-by: Stijn Segers <francesco.borromini@inventati.org>
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
7 years agoubox: support quiet modprobe, support millisecond log timestamp accuracy
Jo-Philipp Wich [Thu, 2 Feb 2017 17:30:25 +0000 (18:30 +0100)]
ubox: support quiet modprobe, support millisecond log timestamp accuracy

Update ubox to latest Git HEAD in order to import the following fixes:

ac2d43e kmodloader: support '-q' quiet option
f8d3d16 ubox: Add an option for more accurate timestamps in log

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years agoath9k: add a warning to the tx99 config option
Felix Fietkau [Thu, 2 Feb 2017 11:25:01 +0000 (12:25 +0100)]
ath9k: add a warning to the tx99 config option

Lots of users try random stuff when they encounter any kind of
difficulty. I've had to debug a number of cases where people had enabled
this option for no reason. Hopefully this warning will reduce the number
of useless support cases.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agomac80211: brcmfmac: backport wowlan netdetect fixes
Rafał Miłecki [Thu, 2 Feb 2017 10:23:17 +0000 (11:23 +0100)]
mac80211: brcmfmac: backport wowlan netdetect fixes

I needed a moment to figure out relation between this patchset and the
nl80211: fix validation of scheduled scan info for wowlan netdetect

It appears nl80211 commit will go on top of brcmfmac changes so it's
safe to backport these patches.

One patch that was excluded is commit 2a2a5d1835b6 ("brcmfmac: add
.update_connect_params() callback") as it depends on missing commit
088e8df82f91 ("cfg80211: Add support to update connection parameters").

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agomac80211: brcmfmac: backport PSM watchdog improvements
Rafał Miłecki [Thu, 2 Feb 2017 09:04:57 +0000 (10:04 +0100)]
mac80211: brcmfmac: backport PSM watchdog improvements

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agomac80211: brcmfmac: backport minor code cleanups
Rafał Miłecki [Thu, 2 Feb 2017 08:59:05 +0000 (09:59 +0100)]
mac80211: brcmfmac: backport minor code cleanups

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agomac80211: brcmfmac: backport 4.10 fixes & typo fix
Rafał Miłecki [Thu, 2 Feb 2017 08:29:21 +0000 (09:29 +0100)]
mac80211: brcmfmac: backport 4.10 fixes & typo fix

This includes memory leak fix in initialization path.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agomac80211: brcmfmac: backport scheduled scan cleanup and chip support
Rafał Miłecki [Thu, 2 Feb 2017 08:27:20 +0000 (09:27 +0100)]
mac80211: brcmfmac: backport scheduled scan cleanup and chip support

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agomac80211: brcmfmac: backport some old patches from 2016
Rafał Miłecki [Thu, 2 Feb 2017 08:21:13 +0000 (09:21 +0100)]
mac80211: brcmfmac: backport some old patches from 2016

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agomac80211: rename brcmfmac patches to use higher prefix
Rafał Miłecki [Thu, 2 Feb 2017 08:39:31 +0000 (09:39 +0100)]
mac80211: rename brcmfmac patches to use higher prefix

There are more patches to backport that should go before these.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agoccache, samba36: fix samba.org addresses to use https
Hannu Nyman [Wed, 1 Feb 2017 21:17:37 +0000 (23:17 +0200)]
ccache, samba36: fix samba.org addresses to use https

samba.org has started to enforce https and
currently plain http downloads with curl/wget fail,
so convert samba.org download links to use https.

Modernise links at the same time.

Also convert samba.org URL fields to have https.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
7 years agoscripts: get_source_date_epoch.sh: fix mercurial support, add mtime fallback
Jo-Philipp Wich [Tue, 31 Jan 2017 06:50:29 +0000 (07:50 +0100)]
scripts: get_source_date_epoch.sh: fix mercurial support, add mtime fallback

Add a fallback case to get_source_date_epoch.sh which reports the modification
time of the script itself in case there is no SCM information available, e.g.
when downloading .tar.gz or .zip tarballs produced by Github.

Also fix the mercurial case while we're at it.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years agodnsmasq: make DHCPv6 viable for standalone dnsmasq install
Eric Luehrsen [Thu, 22 Dec 2016 18:20:25 +0000 (13:20 -0500)]
dnsmasq: make DHCPv6 viable for standalone dnsmasq install

dnsmasq has sufficient services to meet the needs of DHCP
and RA with IP6 for single router router users. This is
the most common use for consumer routers. Its reenforced
as most ISP tend to only DHCP-PD /64. dnsmasq has year
over year demonstrated great flexibility in its option
set, and support for off-standard DHCP clients.

odhcpd has enhanced capabilities focused on IP6 such
as DHCP/RA relay and NDP proxy. However, it is not as
flexible in its option set. odhcpd is not as forgiving
with off-standard DHCP clients. Some points may represent
a long term TODO list, but it is the state currently.

These changes make any such combination possible. Already
odhcpd can be set as the main dhcp server. Now odhcpd
can be removed or disabled and dnsmasq will take over
if DHCPv6 compiled in. The existing DHCPv6 and RA UCI
are translated into dnsmasq.conf. The changes focus on
'--dhcp-range', '--dhcp-host', and '--dhcp-options'.

DHCP host ID is least 16 bits [::1000-::FFFF], but
leaves low range for typical infrastructure assignments.
dnsmasq accepts DHCPv6 options in the tranditional
'--dhcp-option' put they must be prefixed 'option6:'.
dnsmasq will also discover SLAAC DNS entries from DHCPv4
clients MAC, and confirm with a ping at least renew.

Long term TODO include improving use of dnsmasq relay
options for DHCPv4 and DHCPv6 in parallel. It would also
be possible to preconfigure DHCP-PD in host-with-options
records for fixed infrastructure.

Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
[Jo-Philipp Wich: emit proper IPv6 hostid format in dhcp-host directive]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years agodnsmasq: expand 'add_local_hostname' fexibility including FQDN
Eric Luehrsen [Sat, 14 Jan 2017 02:37:25 +0000 (21:37 -0500)]
dnsmasq: expand 'add_local_hostname' fexibility including FQDN

ref commit 612e2276b4a2f57fcbbe79b95bec4a46e89d748c
ref commit ec63e3bf1312ab4c666f7417ca9844857214047f

'option add_local_hostname' scripted implementation statically assigns
this host in auto generated host file at init. If IFUP or other signals
do not occur, then address changes are not tracked. The script doesn't
apply all the addresses at an interface. This may make logs obscure.
The script only puts the bare host name (maybe not FQDN) in host file,
but if '--exapandhosts' is enabled, then /etc/hosts entries will be
suffixed, and "127.0.0.1 localhost" becomes "localhost.lan".

dnsmasq provides an option to perform this function, but it is rather
greedy. '--interface-name=<name>,<iface>' will assign the name to all
IP on the specified interface (except link local). This is a useful
feature, but some setups depend on the original restrictive behavior.

'option add_local_fqdn' is added to enhance the feature set, but
if not entered or empty string, then it will default to original
option and behavior. This new option has a few settings. At each
increased setting the most detailed name becomes the PTR record:
0 - same as add_local_hostname 0 or disabled
1 - same as add_local_hostname 1
2 - assigns the bare host name to all IP w/ --dnsmasq-interface
3 - assigns the FQDN and host to all IP w/ --dnsmasq-interface
4 - assigns <iface>.<host>.<domain> and above w/ --dnsmasq-nterface

'option add_wan_fqdn' is added to run the same procedure on
inferred WAN intefaces. If an interface has 'config dhcp' and
'option ignore 1' set, then it is considered WAN. The original
option would only run on DHCP serving interfaces.

Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
7 years agoramips: Introduce CONFIG_MIPS_APPENDED_RAW_DTB to F5D8235 V1 (rt288x)
Tobias Wolf [Wed, 21 Dec 2016 12:56:16 +0000 (13:56 +0100)]
ramips: Introduce CONFIG_MIPS_APPENDED_RAW_DTB to F5D8235 V1 (rt288x)

This activates the CONFIG_MIPS_APPENDED_RAW_DTB kernel configuration and
configures the F5D8235 V1 target to use append-dtb for kernel creation
instead of OWRTDTB.

Signed-off-by: Tobias Wolf <github-NTEO@vplace.de>
[Jo-Philipp Wich: rewrap commit message]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years agoramips: Introduce CONFIG_MIPS_APPENDED_RAW_DTB to arch/mips/ralink
Tobias Wolf [Wed, 21 Dec 2016 12:55:43 +0000 (13:55 +0100)]
ramips: Introduce CONFIG_MIPS_APPENDED_RAW_DTB to arch/mips/ralink

This commit introduces CONFIG_MIPS_APPENDED_RAW_DTB as an alternative to
OWRTDTB. Both solutions can be used concurrently until all board
configurations have been changed.

Signed-off-by: Tobias Wolf <github-NTEO@vplace.de>
[Jo-Philipp Wich: rewrap commit message]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years agobase-files: emit tagged switch configuration by default
Jo-Philipp Wich [Sat, 15 Oct 2016 23:31:03 +0000 (01:31 +0200)]
base-files: emit tagged switch configuration by default

Instead of only using tagged CPU port configurations when more than one VLAN
is present on the switch, always emit tagged configurations unless a board
explicitely opts out of this behaviour by using the previously introduced
[0-9]u@netdev syntax.

Emitting default tagged configurations has the following benefits:

 - Relation of switch vlans to netdevs is easier to understand, especially
   for multi-cpu-port switches

 - Adding additional VLANs (e.g. to break out a LAN port for other purposes)
   becomes easier as users are not forced to change the existing untagged
   VLAN to tagged and the existing ifname notation from ethX to ethX.Y
   anymore, drastly reducing the likelyhood of soft-bricks.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years agobrcm63xx: board.d: request untagged switch config where applicable
Jo-Philipp Wich [Sat, 15 Oct 2016 23:20:40 +0000 (01:20 +0200)]
brcm63xx: board.d: request untagged switch config where applicable

In order to prepare support for generating tagged switch configurations by
default, explicitely request untagged configs for boards which do not already
request tagging to retain default behaviour.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years agoimagebuilder: make submake invocations less verbose
Jo-Philipp Wich [Mon, 1 Aug 2016 16:26:05 +0000 (18:26 +0200)]
imagebuilder: make submake invocations less verbose

Use silent make invocations for sub-makes like build_image or checksum to
avoid bloating the IB output with non-status info.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years agoodhcp6c: fix PKG_SOURCE_URL
Hans Dedecker [Wed, 1 Feb 2017 20:14:01 +0000 (21:14 +0100)]
odhcp6c: fix PKG_SOURCE_URL

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
7 years agoodhcpd: update to git HEAD version
Hans Dedecker [Wed, 1 Feb 2017 19:59:49 +0000 (20:59 +0100)]
odhcpd: update to git HEAD version

3317c86 dhcpv6-ia: apply lease delete based on assignment bound state
df50429 odhcpd: properly handle netlink messages (FS#388)
83d72cf odhcpd: fix coding style

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
7 years agokernel: fix BCM54612E PHY support
Rafał Miłecki [Wed, 1 Feb 2017 19:53:15 +0000 (20:53 +0100)]
kernel: fix BCM54612E PHY support

This backports upstream commit 62e13097c46c ("net: phy: broadcom: rehook
BCM54612E specific init")

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agoath10k-firmware: revert faulty PKG_SOURCE_DATE change from 7cb27b46
Felix Fietkau [Wed, 1 Feb 2017 17:04:30 +0000 (18:04 +0100)]
ath10k-firmware: revert faulty PKG_SOURCE_DATE change from 7cb27b46

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agoath10k-firmware: update qca9984 firmware and board data
Pavel Kubelun [Wed, 1 Feb 2017 12:10:51 +0000 (15:10 +0300)]
ath10k-firmware: update qca9984 firmware and board data

Fixes firmware crash in rare cases and a bug
ath10k_pci 0001:01:00.0: received unexpected tx_fetch_ind event: in
push mode
for those who kept experiencing it after previous firmware update.

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
7 years agomt76: update to the latest version
Felix Fietkau [Wed, 1 Feb 2017 15:37:14 +0000 (16:37 +0100)]
mt76: update to the latest version

Uses upstream code to parse DT supported band/frequency information.
Update existing .dts files to the new format and remove unnecessary
overrides.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agoramips: remove DT pcie nodes for GL-MT300A/N
Felix Fietkau [Wed, 1 Feb 2017 12:53:57 +0000 (13:53 +0100)]
ramips: remove DT pcie nodes for GL-MT300A/N

These devices don't have a secondary wifi chip

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agortl8366_smi: add linux 4.4 compatibility
Felix Fietkau [Fri, 27 Jan 2017 12:56:48 +0000 (13:56 +0100)]
rtl8366_smi: add linux 4.4 compatibility

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agoath10k-ct: depend on kmod-hwmon-core, it gets used when CONFIG_THERMAL is set
Felix Fietkau [Fri, 27 Jan 2017 12:52:33 +0000 (13:52 +0100)]
ath10k-ct: depend on kmod-hwmon-core, it gets used when CONFIG_THERMAL is set

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agoath10k-ct: fix kernel api compatibility issues
Felix Fietkau [Fri, 27 Jan 2017 12:04:32 +0000 (13:04 +0100)]
ath10k-ct: fix kernel api compatibility issues

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agorotary-gpio-custom: depend on Linux 3.18 and 4.4 (will not work on newer kernels)
Felix Fietkau [Fri, 27 Jan 2017 11:49:55 +0000 (12:49 +0100)]
rotary-gpio-custom: depend on Linux 3.18 and 4.4 (will not work on newer kernels)

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agoxtables-addons: update to version 2.12
Felix Fietkau [Fri, 27 Jan 2017 11:53:39 +0000 (12:53 +0100)]
xtables-addons: update to version 2.12

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agoath10k-ct: Support ath10k CT firmware for 9887 chipsets.
Ben Greear [Fri, 27 Jan 2017 00:11:27 +0000 (16:11 -0800)]
ath10k-ct: Support ath10k CT firmware for 9887 chipsets.

And, update support for 9880 chipsets.  The new firmware
fixes a regression with EAPOL 4/4 packets added in
a recent commit.

It also fixes a case where the firmware would improperly try
to use STBC when configured for 1x1 (as 9887 always is).

Signed-off-by: Ben Greear <greearb@candelatech.com>
7 years agoath10k-ct: Fix performance of 2x2 hardware running 3x3 firmware.
Ben Greear [Fri, 27 Jan 2017 00:11:26 +0000 (16:11 -0800)]
ath10k-ct: Fix performance of 2x2 hardware running 3x3 firmware.

The driver had a bug when calculating the rateset.  This resolves
that and allows full VHT mcs rates on 2x2 hardware.

Signed-off-by: Ben Greear <greearb@candelatech.com>
7 years agoleds-apu2: add compatibility for linux 4.9
Felix Fietkau [Fri, 27 Jan 2017 10:55:22 +0000 (11:55 +0100)]
leds-apu2: add compatibility for linux 4.9

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agogpio-nct5104d: add compatibility for linux 4.9
Felix Fietkau [Fri, 27 Jan 2017 10:55:12 +0000 (11:55 +0100)]
gpio-nct5104d: add compatibility for linux 4.9

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agolantiq: enable SMP for XRX200
Felix Fietkau [Thu, 4 Aug 2016 10:38:01 +0000 (12:38 +0200)]
lantiq: enable SMP for XRX200

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agoscripts/getver.sh: append short git hash based on upstream commit
Magnus Kroken [Sat, 14 Jan 2017 21:34:01 +0000 (22:34 +0100)]
scripts/getver.sh: append short git hash based on upstream commit

The short git hash suffix printed by getver.sh is taken from the
latest local commit, change this to use the hash from latest
upstream commit if available. This is considered the intended
behavior based on commit message a642a11faca87e2a7bddc1fadb54253e2fc26e84,
introducing getver.sh.

Signed-off-by: Magnus Kroken <mkroken@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agogcc: remove obsolete uclibc patch
Felix Fietkau [Wed, 1 Feb 2017 07:22:27 +0000 (08:22 +0100)]
gcc: remove obsolete uclibc patch

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agobcm53xx: fix LAN MAC address for devices that use eth2 originally
Rafał Miłecki [Tue, 31 Jan 2017 12:53:46 +0000 (13:53 +0100)]
bcm53xx: fix LAN MAC address for devices that use eth2 originally

We override default Ethernet interface with eth0 which often uses random
MAC due to missing proper NVRAM entry. Fix this by manually assigning
MAC in the config.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agotoolchain/gcc: reduce source directory size by about 420 MB
Felix Fietkau [Wed, 1 Feb 2017 07:29:06 +0000 (08:29 +0100)]
toolchain/gcc: reduce source directory size by about 420 MB

Remove gcc testsuite, ada and libjava (if not selected)

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agobuild: keep recursive dependency check stampfiles up to date
Felix Fietkau [Wed, 1 Feb 2017 13:44:22 +0000 (14:44 +0100)]
build: keep recursive dependency check stampfiles up to date

Since the main stamp file depends on the _check stampfile, the _check
stampfile needs to be created on the first run as well.

Fixes spurious rebuilds with CONFIG_AUTOREBUILD=y

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agomvebu: fix usb port leds
Mathias Kresin [Tue, 24 Jan 2017 22:04:10 +0000 (23:04 +0100)]
mvebu: fix usb port leds

All mvebu boards have three USB LEDs. The first one is used for the
USB1 port.

There are two LEDs related to the second USB port. The top (bar) LED
gets bright in case any USB device is connected to the second USB port.

If the connected device is an USB 3 (SuperSpeed) device, the small dot
LED bellow the "bar" LED gets also bright.

While at it, use a name for the USB LEDs that matches the names printed
on the case.

Fixes: FS#423, FS#425
Signed-off-by: Kabuli Chana <newtownbuild@gmail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years agokernel: backport bgmac support for external PHYs
Rafał Miłecki [Tue, 31 Jan 2017 21:01:05 +0000 (22:01 +0100)]
kernel: backport bgmac support for external PHYs

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agokernel: use upstream accepted bgmac fix for BCM47186B0
Rafał Miłecki [Tue, 31 Jan 2017 20:08:18 +0000 (21:08 +0100)]
kernel: use upstream accepted bgmac fix for BCM47186B0

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agokernel: rename bgmac patches to squeeze them
Rafał Miłecki [Tue, 31 Jan 2017 20:00:51 +0000 (21:00 +0100)]
kernel: rename bgmac patches to squeeze them

This is a pure rename without any changes. It makes maintaining bgmac
simpler and will hopefully make adding new kernel a bit easier.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agoodhcp6c: use LEDE_GIT in package source url
Hans Dedecker [Mon, 30 Jan 2017 14:15:18 +0000 (15:15 +0100)]
odhcp6c: use LEDE_GIT in package source url

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
7 years agomt76: update to the latest version
Felix Fietkau [Tue, 31 Jan 2017 20:28:28 +0000 (21:28 +0100)]
mt76: update to the latest version

Fixes DFS detection false positive issues

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agokernel: update bcma to fix devm memory leaks
Rafał Miłecki [Tue, 31 Jan 2017 13:21:53 +0000 (14:21 +0100)]
kernel: update bcma to fix devm memory leaks

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agomac80211: start hostapd with logging wpa_printf messages to syslog
Rafał Miłecki [Mon, 30 Jan 2017 06:32:00 +0000 (07:32 +0100)]
mac80211: start hostapd with logging wpa_printf messages to syslog

Some debugging/error messages are printed using wpa_printf and this
change allows finally reading them out of the syslog.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>