6to4: use network_find_wan() and network_get_iapddr() to find local ip, use json_get_...
[openwrt/openwrt.git] / package / 6to4 / files / 6to4.sh
1 #!/bin/sh
2 # 6to4.sh - IPv6-in-IPv4 tunnel backend
3 # Copyright (c) 2010-2012 OpenWrt.org
4
5 [ -n "$INCLUDE_ONLY" ] || {
6 . /lib/functions.sh
7 . /lib/functions/network.sh
8 . ../netifd-proto.sh
9 init_proto "$@"
10 }
11
12 find_6to4_prefix() {
13 local ip4="$1"
14 local oIFS="$IFS"; IFS="."; set -- $ip4; IFS="$oIFS"
15
16 printf "2002:%02x%02x:%02x%02x\n" $1 $2 $3 $4
17 }
18
19 test_6to4_rfc1918()
20 {
21 local oIFS="$IFS"; IFS="."; set -- $1; IFS="$oIFS"
22 [ $1 -eq 10 ] && return 0
23 [ $1 -eq 192 ] && [ $2 -eq 168 ] && return 0
24 [ $1 -eq 172 ] && [ $2 -ge 16 ] && [ $2 -le 31 ] && return 0
25
26 # RFC 6598
27 [ $1 -eq 100 ] && [ $2 -ge 64 ] && [ $2 -le 127 ] && return 0
28
29 return 1
30 }
31
32 set_6to4_radvd_interface() {
33 local cfgid="$1"
34 local lanif="${2:-lan}"
35 local ifmtu="${3:-1280}"
36 local ifsection=""
37
38 find_ifsection() {
39 local net
40 local cfg="$1"
41 config_get net "$cfg" interface
42
43 [ "$net" = "$lanif" ] && {
44 ifsection="$cfg"
45 return 1
46 }
47 }
48
49 config_foreach find_ifsection interface
50
51 [ -z "$ifsection" ] && {
52 ifsection="iface_$sid"
53 uci_set_state radvd "$ifsection" "" interface
54 uci_set_state radvd "$ifsection" interface "$lanif"
55 }
56
57 uci_set_state radvd "$ifsection" ignore 0
58 uci_set_state radvd "$ifsection" IgnoreIfMissing 1
59 uci_set_state radvd "$ifsection" AdvSendAdvert 1
60 uci_set_state radvd "$ifsection" MaxRtrAdvInterval 30
61 uci_set_state radvd "$ifsection" AdvLinkMTU "$ifmtu"
62 }
63
64 set_6to4_radvd_prefix() {
65 local cfgid="$1"
66 local lanif="${2:-lan}"
67 local wanif="${3:-wan}"
68 local prefix="${4:-0:0:0:1::/64}"
69 local vlt="${5:-300}"
70 local plt="${6:-120}"
71 local pfxsection=""
72
73 find_pfxsection() {
74 local net base
75 local cfg="$1"
76 config_get net "$cfg" interface
77 config_get base "$cfg" Base6to4Interface
78
79 [ "$net" = "$lanif" ] && [ "$base" = "$wanif" ] && {
80 pfxsection="$cfg"
81 return 1
82 }
83 }
84
85 config_foreach find_pfxsection prefix
86
87 [ -z "$pfxsection" ] && {
88 pfxsection="prefix_${sid}_${lanif}"
89 uci_set_state radvd "$pfxsection" "" prefix
90 uci_set_state radvd "$pfxsection" ignore 0
91 uci_set_state radvd "$pfxsection" interface "$lanif"
92 uci_set_state radvd "$pfxsection" prefix "$prefix"
93 uci_set_state radvd "$pfxsection" AdvOnLink 1
94 uci_set_state radvd "$pfxsection" AdvAutonomous 1
95 uci_set_state radvd "$pfxsection" AdvValidLifetime "$vlt"
96 uci_set_state radvd "$pfxsection" AdvPreferredLifetime "$plt"
97 uci_set_state radvd "$pfxsection" Base6to4Interface "$wanif"
98 }
99 }
100
101 tun_error() {
102 local cfg="$1"; shift;
103
104 [ -n "$1" ] && proto_notify_error "$cfg" "$@"
105 proto_block_restart "$cfg"
106 }
107
108 proto_6to4_setup() {
109 local cfg="$1"
110 local iface="$2"
111 local link="6to4-$cfg"
112
113 local mtu ttl ipaddr adv_subnet adv_interface adv_valid_lifetime adv_preferred_lifetime
114 json_get_vars mtu ttl ipaddr adv_subnet adv_interface adv_valid_lifetime adv_preferred_lifetime
115
116 [ -z "$ipaddr" ] && {
117 local wanif
118 if ! network_find_wan wanif || ! network_get_ipaddr ipaddr "$wanif"; then
119 tun_error "$cfg" "NO_WAN_LINK"
120 return
121 fi
122 }
123
124 test_6to4_rfc1918 "$ipaddr" && {
125 tun_error "$cfg" "INVALID_LOCAL_ADDRESS"
126 return
127 }
128
129 # find our local prefix
130 local prefix6=$(find_6to4_prefix "$ipaddr")
131 local local6="$prefix6::1"
132
133 proto_init_update "$link" 1
134 proto_add_ipv6_address "$local6" 16
135 proto_add_ipv6_route "::" 0 "::192.88.99.1"
136
137 proto_add_tunnel
138 json_add_string mode sit
139 json_add_int mtu "${mtu:-1280}"
140 json_add_int ttl "${ttl:-64}"
141 json_add_string local "$ipaddr"
142 proto_close_tunnel
143
144 proto_send_update "$cfg"
145
146 [ -f /etc/config/radvd ] && /etc/init.d/radvd enabled && {
147 local sid="6to4_$cfg"
148
149 uci_revert_state radvd
150 config_load radvd
151 config_load network
152
153 adv_subnet=$((0x${adv_subnet:-1}))
154
155 local adv_subnets=""
156
157 for adv_interface in ${adv_interface:-lan}; do
158 local adv_ifname
159 config_get adv_ifname "${adv_interface:-lan}" ifname
160
161 grep -qs "^ *$adv_ifname:" /proc/net/dev && {
162 local subnet6="$(printf "%s:%x::1/64" "$prefix6" $adv_subnet)"
163
164 logger -t "$link" " * Advertising IPv6 subnet $subnet6 on ${adv_interface:-lan} ($adv_ifname)"
165 ip -6 addr add $subnet6 dev $adv_ifname
166
167 set_6to4_radvd_interface "$sid" "$adv_interface" "$mtu"
168 set_6to4_radvd_prefix "$sid" "$adv_interface" \
169 "$wancfg" "$(printf "0:0:0:%x::/64" $adv_subnet)" \
170 "$adv_valid_lifetime" "$adv_preferred_lifetime"
171
172 adv_subnets="${adv_subnets:+$adv_subnets }$adv_ifname:$subnet6"
173 adv_subnet=$(($adv_subnet + 1))
174 }
175 done
176
177 uci_set_state network "$cfg" adv_subnets "$adv_subnets"
178
179 /etc/init.d/radvd restart
180 }
181 }
182
183 proto_6to4_teardown() {
184 local cfg="$1"
185 local link="6to4-$cfg"
186
187 local adv_subnets=$(uci_get_state network "$cfg" adv_subnets)
188
189 grep -qs "^ *$link:" /proc/net/dev && {
190 [ -n "$adv_subnets" ] && {
191 uci_revert_state radvd
192 /etc/init.d/radvd enabled && /etc/init.d/radvd restart
193 }
194 }
195 }
196
197 proto_6to4_init_config() {
198 no_device=1
199 available=1
200
201 proto_config_add_string "ipaddr"
202 proto_config_add_int "mtu"
203 proto_config_add_int "ttl"
204 proto_config_add_string "adv_interface"
205 proto_config_add_string "adv_subnet"
206 proto_config_add_int "adv_valid_lifetime"
207 proto_config_add_int "adv_preferred_lifetime"
208 }
209
210 [ -n "$INCLUDE_ONLY" ] || {
211 add_protocol 6to4
212 }