package/boot/uboot-kirkwood/files/board/iomega/iconnect/iconnect.c

   1 /*
   2  * Copyright (C) 2009-2012
   3  * Wojciech Dubowik <wojciech.dubowik@neratec.com>
   4  * Luka Perkov <uboot@lukaperkov.net>
   5  *
   6  * See file CREDITS for list of people who contributed to this
   7  * project.
   8  *
   9  * This program is free software; you can redistribute it and/or
  10  * modify it under the terms of the GNU General Public License as
  11  * published by the Free Software Foundation; either version 2 of
  12  * the License, or (at your option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  17  * GNU General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program. If not, see <http://www.gnu.org/licenses/>.
  21  */
  22
  23 #include <common.h>
  24 #include <miiphy.h>
  25 #include <asm/arch/cpu.h>
  26 #include <asm/arch/kirkwood.h>
  27 #include <asm/arch/mpp.h>
  28 #include "iconnect.h"
  29
  30 DECLARE_GLOBAL_DATA_PTR;
  31
  32 int board_early_init_f(void)
  33 {
  34         /*
  35          * default gpio configuration
  36          * There are maximum 64 gpios controlled through 2 sets of registers
  37          * the below configuration configures mainly initial LED status
  38          */
  39         kw_config_gpio(ICONNECT_OE_VAL_LOW,
  40                         ICONNECT_OE_VAL_HIGH,
  41                         ICONNECT_OE_LOW, ICONNECT_OE_HIGH);
  42
  43         /* Multi-Purpose Pins Functionality configuration */
  44         u32 kwmpp_config[] = {
  45                 MPP0_NF_IO2,
  46                 MPP1_NF_IO3,
  47                 MPP2_NF_IO4,
  48                 MPP3_NF_IO5,
  49                 MPP4_NF_IO6,
  50                 MPP5_NF_IO7,
  51                 MPP6_SYSRST_OUTn,
  52                 MPP7_GPO,
  53                 MPP8_TW_SDA,
  54                 MPP9_TW_SCK,
  55                 MPP10_UART0_TXD,
  56                 MPP11_UART0_RXD,
  57                 MPP12_GPO,
  58                 MPP13_SD_CMD,
  59                 MPP14_SD_D0,
  60                 MPP15_SD_D1,
  61                 MPP16_SD_D2,
  62                 MPP17_SD_D3,
  63                 MPP18_NF_IO0,
  64                 MPP19_NF_IO1,
  65                 MPP20_GE1_0,
  66                 MPP21_GE1_1,
  67                 MPP22_GE1_2,
  68                 MPP23_GE1_3,
  69                 MPP24_GE1_4,
  70                 MPP25_GE1_5,
  71                 MPP26_GE1_6,
  72                 MPP27_GE1_7,
  73                 MPP28_GPIO,
  74                 MPP29_GPIO,
  75                 MPP30_GE1_10,
  76                 MPP31_GE1_11,
  77                 MPP32_GE1_12,
  78                 MPP33_GE1_13,
  79                 MPP34_GE1_14,
  80                 MPP35_GPIO,
  81                 MPP36_AUDIO_SPDIFI,
  82                 MPP37_AUDIO_SPDIFO,
  83                 MPP38_GPIO,
  84                 MPP39_TDM_SPI_CS0,
  85                 MPP40_TDM_SPI_SCK,
  86                 MPP41_GPIO,
  87                 MPP42_GPIO,
  88                 MPP43_GPIO,
  89                 MPP44_GPIO,
  90                 MPP45_GPIO,
  91                 MPP46_GPIO,
  92                 MPP47_GPIO,
  93                 MPP48_GPIO,
  94                 MPP49_GPIO,
  95                 0
  96         };
  97         kirkwood_mpp_conf(kwmpp_config);
  98         return 0;
  99 }
 100
 101 int board_init(void)
 102 {
 103         /* Boot parameters address */
 104         gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100;
 105
 106         return 0;
 107 }
 108
 109 #ifdef CONFIG_RESET_PHY_R
 110 /* Configure and initialize PHY */
 111 void reset_phy(void)
 112 {
 113         u16 reg;
 114         u16 devadr;
 115         char *name = "egiga0";
 116
 117         if (miiphy_set_current_dev(name))
 118                 return;
 119
 120         /* command to read PHY dev address */
 121         if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) {
 122                 printf("Err..(%s) could not read PHY dev address\n", __func__);
 123                 return;
 124         }
 125
 126         /*
 127          * Enable RGMII delay on Tx and Rx for CPU port
 128          * Ref: sec 4.7.2 of chip datasheet
 129          */
 130         miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2);
 131         miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, &reg);
 132         reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL);
 133         miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg);
 134         miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0);
 135
 136         /* reset the phy */
 137         miiphy_reset(name, devadr);
 138
 139         debug("88E1116 Initialized on %s\n", name);
 140 }
 141 #endif /* CONFIG_RESET_PHY_R */