package/boot/uboot-mediatek/patches/430-add-bpi-r3.patch

   1 --- a/arch/arm/dts/Makefile
   2 +++ b/arch/arm/dts/Makefile
   3 @@ -1211,6 +1211,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
   4         mt7981-snfi-nand-rfb.dtb \
   5         mt7981-emmc-rfb.dtb \
   6         mt7981-sd-rfb.dtb \
   7 +       mt7986a-bpi-r3-sd.dtb \
   8 +       mt7986a-bpi-r3-emmc.dtb \
   9         mt7986a-rfb.dtb \
  10         mt7986b-rfb.dtb \
  11         mt7986a-sd-rfb.dtb \
  12 --- /dev/null
  13 +++ b/configs/mt7986a_bpi-r3-emmc_defconfig
  14 @@ -0,0 +1,192 @@
  15 +CONFIG_ARM=y
  16 +CONFIG_POSITION_INDEPENDENT=y
  17 +CONFIG_ARCH_MEDIATEK=y
  18 +CONFIG_TARGET_MT7986=y
  19 +CONFIG_SYS_TEXT_BASE=0x41e00000
  20 +CONFIG_SYS_MALLOC_F_LEN=0x4000
  21 +CONFIG_NR_DRAM_BANKS=1
  22 +CONFIG_DEFAULT_DEVICE_TREE="mt7986a-bpi-r3-emmc"
  23 +CONFIG_DEFAULT_ENV_FILE="bananapi_bpi-r3_emmc_env"
  24 +CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-bpi-r3-emmc.dtb"
  25 +CONFIG_OF_LIBFDT_OVERLAY=y
  26 +CONFIG_DEBUG_UART_BASE=0x11002000
  27 +CONFIG_DEBUG_UART_CLOCK=40000000
  28 +CONFIG_DEBUG_UART=y
  29 +CONFIG_SYS_LOAD_ADDR=0x46000000
  30 +CONFIG_NET_RANDOM_ETHADDR=y
  31 +CONFIG_SMBIOS_PRODUCT_NAME=""
  32 +CONFIG_AUTOBOOT_KEYED=y
  33 +CONFIG_BOOTDELAY=30
  34 +CONFIG_AUTOBOOT_MENU_SHOW=y
  35 +CONFIG_CFB_CONSOLE_ANSI=y
  36 +CONFIG_BOARD_LATE_INIT=y
  37 +CONFIG_BUTTON=y
  38 +CONFIG_BUTTON_GPIO=y
  39 +CONFIG_GPIO_HOG=y
  40 +CONFIG_CMD_ENV_FLAGS=y
  41 +CONFIG_FIT=y
  42 +CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
  43 +CONFIG_LED=y
  44 +CONFIG_LED_BLINK=y
  45 +CONFIG_LED_GPIO=y
  46 +CONFIG_LOGLEVEL=7
  47 +CONFIG_LOG=y
  48 +CONFIG_SYS_PROMPT="MT7986> "
  49 +CONFIG_CMD_BOOTMENU=y
  50 +CONFIG_CMD_BOOTP=y
  51 +CONFIG_CMD_BUTTON=y
  52 +CONFIG_CMD_CACHE=y
  53 +CONFIG_CMD_CDP=y
  54 +CONFIG_CMD_CPU=y
  55 +CONFIG_CMD_DHCP=y
  56 +CONFIG_CMD_DM=y
  57 +CONFIG_CMD_DNS=y
  58 +CONFIG_CMD_ECHO=y
  59 +CONFIG_CMD_ENV_READMEM=y
  60 +CONFIG_CMD_ERASEENV=y
  61 +CONFIG_CMD_EXT4=y
  62 +CONFIG_CMD_FAT=y
  63 +CONFIG_CMD_FDT=y
  64 +CONFIG_CMD_FS_GENERIC=y
  65 +CONFIG_CMD_FS_UUID=y
  66 +CONFIG_CMD_GPIO=y
  67 +CONFIG_CMD_GPT=y
  68 +CONFIG_CMD_HASH=y
  69 +CONFIG_CMD_ITEST=y
  70 +CONFIG_CMD_LED=y
  71 +CONFIG_CMD_LICENSE=y
  72 +CONFIG_CMD_LINK_LOCAL=y
  73 +# CONFIG_CMD_MBR is not set
  74 +CONFIG_CMD_MMC=y
  75 +CONFIG_CMD_MTD=y
  76 +CONFIG_CMD_PCI=y
  77 +CONFIG_CMD_PSTORE=y
  78 +CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
  79 +CONFIG_CMD_SF_TEST=y
  80 +CONFIG_CMD_PING=y
  81 +CONFIG_CMD_PXE=y
  82 +CONFIG_CMD_PWM=y
  83 +CONFIG_CMD_SMC=y
  84 +CONFIG_CMD_TFTPBOOT=y
  85 +CONFIG_CMD_TFTPSRV=y
  86 +CONFIG_CMD_UBI=y
  87 +CONFIG_CMD_UBI_RENAME=y
  88 +CONFIG_CMD_UBIFS=y
  89 +CONFIG_CMD_ASKENV=y
  90 +CONFIG_CMD_PART=y
  91 +CONFIG_CMD_RARP=y
  92 +CONFIG_CMD_SETEXPR=y
  93 +CONFIG_CMD_SLEEP=y
  94 +CONFIG_CMD_SNTP=y
  95 +CONFIG_CMD_SOURCE=y
  96 +CONFIG_CMD_STRINGS=y
  97 +CONFIG_CMD_USB=y
  98 +CONFIG_CMD_UUID=y
  99 +CONFIG_DISPLAY_CPUINFO=y
 100 +CONFIG_DM_MMC=y
 101 +CONFIG_DM_MTD=y
 102 +CONFIG_DM_REGULATOR=y
 103 +CONFIG_DM_REGULATOR_FIXED=y
 104 +CONFIG_DM_REGULATOR_GPIO=y
 105 +CONFIG_DM_USB=y
 106 +CONFIG_DM_PWM=y
 107 +CONFIG_PWM_MTK=y
 108 +CONFIG_HUSH_PARSER=y
 109 +CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
 110 +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 111 +CONFIG_VERSION_VARIABLE=y
 112 +CONFIG_PARTITION_UUIDS=y
 113 +CONFIG_NETCONSOLE=y
 114 +CONFIG_REGMAP=y
 115 +CONFIG_SYSCON=y
 116 +CONFIG_CLK=y
 117 +CONFIG_DM_GPIO=y
 118 +CONFIG_DM_SCSI=y
 119 +CONFIG_AHCI=y
 120 +CONFIG_AHCI_PCI=y
 121 +CONFIG_SCSI_AHCI=y
 122 +CONFIG_SCSI=y
 123 +CONFIG_CMD_SCSI=y
 124 +CONFIG_PHY=y
 125 +CONFIG_PHY_MTK_TPHY=y
 126 +CONFIG_PHY_FIXED=y
 127 +CONFIG_MTK_AHCI=y
 128 +CONFIG_DM_ETH=y
 129 +CONFIG_MEDIATEK_ETH=y
 130 +CONFIG_PCI=y
 131 +CONFIG_MTD=y
 132 +CONFIG_MTD_UBI_FASTMAP=y
 133 +CONFIG_DM_PCI=y
 134 +CONFIG_PCIE_MEDIATEK=y
 135 +CONFIG_PINCTRL=y
 136 +CONFIG_PINCONF=y
 137 +CONFIG_PINCTRL_MT7622=y
 138 +CONFIG_POWER_DOMAIN=y
 139 +CONFIG_PRE_CONSOLE_BUFFER=y
 140 +CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
 141 +CONFIG_MTK_POWER_DOMAIN=y
 142 +CONFIG_RAM=y
 143 +CONFIG_DM_SERIAL=y
 144 +CONFIG_MTK_SERIAL=y
 145 +CONFIG_MMC=y
 146 +CONFIG_MMC_DEFAULT_DEV=1
 147 +CONFIG_MMC_HS200_SUPPORT=y
 148 +CONFIG_MMC_MTK=y
 149 +CONFIG_MMC_SUPPORTS_TUNING=y
 150 +CONFIG_SUPPORT_EMMC_BOOT=y
 151 +CONFIG_SPI=y
 152 +CONFIG_DM_SPI=y
 153 +CONFIG_MTK_SPI_NAND=y
 154 +CONFIG_MTK_SPI_NAND_MTD=y
 155 +CONFIG_SYSRESET_WATCHDOG=y
 156 +CONFIG_WDT_MTK=y
 157 +CONFIG_LZO=y
 158 +CONFIG_ZSTD=y
 159 +CONFIG_HEXDUMP=y
 160 +CONFIG_RANDOM_UUID=y
 161 +CONFIG_REGEX=y
 162 +CONFIG_USB=y
 163 +CONFIG_USB_HOST=y
 164 +CONFIG_USB_XHCI_HCD=y
 165 +CONFIG_USB_XHCI_MTK=y
 166 +CONFIG_USB_STORAGE=y
 167 +CONFIG_OF_EMBED=y
 168 +CONFIG_ENV_OVERWRITE=y
 169 +CONFIG_ENV_IS_IN_MMC=y
 170 +CONFIG_ENV_OFFSET=0x400000
 171 +CONFIG_ENV_OFFSET_REDUND=0x440000
 172 +CONFIG_ENV_SIZE=0x40000
 173 +CONFIG_ENV_SIZE_REDUND=0x40000
 174 +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 175 +CONFIG_NET_RANDOM_ETHADDR=y
 176 +CONFIG_REGMAP=y
 177 +CONFIG_SYSCON=y
 178 +CONFIG_CLK=y
 179 +CONFIG_SUPPORT_EMMC_BOOT=y
 180 +CONFIG_MMC_HS200_SUPPORT=y
 181 +CONFIG_MMC_MTK=y
 182 +CONFIG_PHY_FIXED=y
 183 +CONFIG_DM_ETH=y
 184 +CONFIG_MEDIATEK_ETH=y
 185 +CONFIG_PINCTRL=y
 186 +CONFIG_PINCONF=y
 187 +CONFIG_PINCTRL_MT7986=y
 188 +CONFIG_POWER_DOMAIN=y
 189 +CONFIG_MTK_POWER_DOMAIN=y
 190 +CONFIG_DM_REGULATOR=y
 191 +CONFIG_DM_REGULATOR_FIXED=y
 192 +CONFIG_DM_SERIAL=y
 193 +CONFIG_MTK_SERIAL=y
 194 +CONFIG_HEXDUMP=y
 195 +CONFIG_USE_DEFAULT_ENV_FILE=y
 196 +CONFIG_MTD_SPI_NAND=y
 197 +CONFIG_MTK_SPIM=y
 198 +#CONFIG_MTK_SNOR=y
 199 +CONFIG_DM_SPI_FLASH=y
 200 +CONFIG_SPI_FLASH_MTD=y
 201 +CONFIG_SPI_FLASH_WINBOND=y
 202 +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 203 +CONFIG_CMD_MTD=y
 204 +CONFIG_CMD_SF=y
 205 +CONFIG_CMD_NAND=y
 206 +CONFIG_CMD_NAND_TRIMFFS=y
 207 +# CONFIG_ENABLE_NAND_NMBM is not set
 208 --- /dev/null
 209 +++ b/configs/mt7986a_bpi-r3-nor_defconfig
 210 @@ -0,0 +1,193 @@
 211 +CONFIG_ARM=y
 212 +CONFIG_POSITION_INDEPENDENT=y
 213 +CONFIG_ARCH_MEDIATEK=y
 214 +CONFIG_TARGET_MT7986=y
 215 +CONFIG_SYS_TEXT_BASE=0x41e00000
 216 +CONFIG_SYS_MALLOC_F_LEN=0x4000
 217 +CONFIG_NR_DRAM_BANKS=1
 218 +CONFIG_DEFAULT_DEVICE_TREE="mt7986a-bpi-r3-emmc"
 219 +CONFIG_DEFAULT_ENV_FILE="bananapi_bpi-r3_nor_env"
 220 +CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-bpi-r3-emmc.dtb"
 221 +CONFIG_OF_LIBFDT_OVERLAY=y
 222 +CONFIG_DEBUG_UART_BASE=0x11002000
 223 +CONFIG_DEBUG_UART_CLOCK=40000000
 224 +CONFIG_DEBUG_UART=y
 225 +CONFIG_SYS_LOAD_ADDR=0x46000000
 226 +CONFIG_NET_RANDOM_ETHADDR=y
 227 +CONFIG_SMBIOS_PRODUCT_NAME=""
 228 +CONFIG_AUTOBOOT_KEYED=y
 229 +CONFIG_BOOTDELAY=30
 230 +CONFIG_AUTOBOOT_MENU_SHOW=y
 231 +CONFIG_CFB_CONSOLE_ANSI=y
 232 +CONFIG_BOARD_LATE_INIT=y
 233 +CONFIG_BUTTON=y
 234 +CONFIG_BUTTON_GPIO=y
 235 +CONFIG_GPIO_HOG=y
 236 +CONFIG_CMD_ENV_FLAGS=y
 237 +CONFIG_FIT=y
 238 +CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
 239 +CONFIG_LED=y
 240 +CONFIG_LED_BLINK=y
 241 +CONFIG_LED_GPIO=y
 242 +CONFIG_LOGLEVEL=7
 243 +CONFIG_LOG=y
 244 +CONFIG_SYS_PROMPT="MT7986> "
 245 +CONFIG_CMD_BOOTMENU=y
 246 +CONFIG_CMD_BOOTP=y
 247 +CONFIG_CMD_BUTTON=y
 248 +CONFIG_CMD_CACHE=y
 249 +CONFIG_CMD_CDP=y
 250 +CONFIG_CMD_CPU=y
 251 +CONFIG_CMD_DHCP=y
 252 +CONFIG_CMD_DM=y
 253 +CONFIG_CMD_DNS=y
 254 +CONFIG_CMD_ECHO=y
 255 +CONFIG_CMD_ENV_READMEM=y
 256 +CONFIG_CMD_ERASEENV=y
 257 +CONFIG_CMD_EXT4=y
 258 +CONFIG_CMD_FAT=y
 259 +CONFIG_CMD_FDT=y
 260 +CONFIG_CMD_FS_GENERIC=y
 261 +CONFIG_CMD_FS_UUID=y
 262 +CONFIG_CMD_GPIO=y
 263 +CONFIG_CMD_GPT=y
 264 +CONFIG_CMD_HASH=y
 265 +CONFIG_CMD_ITEST=y
 266 +CONFIG_CMD_LED=y
 267 +CONFIG_CMD_LICENSE=y
 268 +CONFIG_CMD_LINK_LOCAL=y
 269 +# CONFIG_CMD_MBR is not set
 270 +CONFIG_CMD_MMC=y
 271 +CONFIG_CMD_MTD=y
 272 +CONFIG_CMD_PCI=y
 273 +CONFIG_CMD_PSTORE=y
 274 +CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
 275 +CONFIG_CMD_SF_TEST=y
 276 +CONFIG_CMD_PING=y
 277 +CONFIG_CMD_PXE=y
 278 +CONFIG_CMD_PWM=y
 279 +CONFIG_CMD_SMC=y
 280 +CONFIG_CMD_TFTPBOOT=y
 281 +CONFIG_CMD_TFTPSRV=y
 282 +CONFIG_CMD_UBI=y
 283 +CONFIG_CMD_UBI_RENAME=y
 284 +CONFIG_CMD_UBIFS=y
 285 +CONFIG_CMD_ASKENV=y
 286 +CONFIG_CMD_PART=y
 287 +CONFIG_CMD_RARP=y
 288 +CONFIG_CMD_SETEXPR=y
 289 +CONFIG_CMD_SLEEP=y
 290 +CONFIG_CMD_SNTP=y
 291 +CONFIG_CMD_SOURCE=y
 292 +CONFIG_CMD_STRINGS=y
 293 +CONFIG_CMD_USB=y
 294 +CONFIG_CMD_UUID=y
 295 +CONFIG_DISPLAY_CPUINFO=y
 296 +CONFIG_DM_MMC=y
 297 +CONFIG_DM_MTD=y
 298 +CONFIG_DM_REGULATOR=y
 299 +CONFIG_DM_REGULATOR_FIXED=y
 300 +CONFIG_DM_REGULATOR_GPIO=y
 301 +CONFIG_DM_USB=y
 302 +CONFIG_DM_PWM=y
 303 +CONFIG_PWM_MTK=y
 304 +CONFIG_HUSH_PARSER=y
 305 +CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
 306 +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 307 +CONFIG_VERSION_VARIABLE=y
 308 +CONFIG_PARTITION_UUIDS=y
 309 +CONFIG_NETCONSOLE=y
 310 +CONFIG_REGMAP=y
 311 +CONFIG_SYSCON=y
 312 +CONFIG_CLK=y
 313 +CONFIG_DM_GPIO=y
 314 +CONFIG_DM_SCSI=y
 315 +CONFIG_AHCI=y
 316 +CONFIG_AHCI_PCI=y
 317 +CONFIG_SCSI_AHCI=y
 318 +CONFIG_SCSI=y
 319 +CONFIG_CMD_SCSI=y
 320 +CONFIG_PHY=y
 321 +CONFIG_PHY_MTK_TPHY=y
 322 +CONFIG_PHY_FIXED=y
 323 +CONFIG_MTK_AHCI=y
 324 +CONFIG_DM_ETH=y
 325 +CONFIG_MEDIATEK_ETH=y
 326 +CONFIG_PCI=y
 327 +CONFIG_MTD=y
 328 +CONFIG_MTD_UBI_FASTMAP=y
 329 +CONFIG_DM_PCI=y
 330 +CONFIG_PCIE_MEDIATEK=y
 331 +CONFIG_PINCTRL=y
 332 +CONFIG_PINCONF=y
 333 +CONFIG_PINCTRL_MT7622=y
 334 +CONFIG_POWER_DOMAIN=y
 335 +CONFIG_PRE_CONSOLE_BUFFER=y
 336 +CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
 337 +CONFIG_MTK_POWER_DOMAIN=y
 338 +CONFIG_RAM=y
 339 +CONFIG_DM_SERIAL=y
 340 +CONFIG_MTK_SERIAL=y
 341 +CONFIG_MMC=y
 342 +CONFIG_MMC_DEFAULT_DEV=1
 343 +CONFIG_MMC_HS200_SUPPORT=y
 344 +CONFIG_MMC_MTK=y
 345 +CONFIG_MMC_SUPPORTS_TUNING=y
 346 +CONFIG_SUPPORT_EMMC_BOOT=y
 347 +CONFIG_SPI=y
 348 +CONFIG_DM_SPI=y
 349 +CONFIG_MTK_SPI_NAND=y
 350 +CONFIG_MTK_SPI_NAND_MTD=y
 351 +CONFIG_SYSRESET_WATCHDOG=y
 352 +CONFIG_WDT_MTK=y
 353 +CONFIG_LZO=y
 354 +CONFIG_ZSTD=y
 355 +CONFIG_HEXDUMP=y
 356 +CONFIG_RANDOM_UUID=y
 357 +CONFIG_REGEX=y
 358 +CONFIG_USB=y
 359 +CONFIG_USB_HOST=y
 360 +CONFIG_USB_XHCI_HCD=y
 361 +CONFIG_USB_XHCI_MTK=y
 362 +CONFIG_USB_STORAGE=y
 363 +CONFIG_OF_EMBED=y
 364 +CONFIG_ENV_OVERWRITE=y
 365 +CONFIG_ENV_IS_IN_MTD=y
 366 +CONFIG_ENV_MTD_NAME="u-boot-env"
 367 +CONFIG_ENV_OFFSET=0x0
 368 +CONFIG_ENV_OFFSET_REDUND=0x20000
 369 +CONFIG_ENV_SIZE=0x20000
 370 +CONFIG_ENV_SIZE_REDUND=0x20000
 371 +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 372 +CONFIG_NET_RANDOM_ETHADDR=y
 373 +CONFIG_REGMAP=y
 374 +CONFIG_SYSCON=y
 375 +CONFIG_CLK=y
 376 +CONFIG_SUPPORT_EMMC_BOOT=y
 377 +CONFIG_MMC_HS200_SUPPORT=y
 378 +CONFIG_MMC_MTK=y
 379 +CONFIG_PHY_FIXED=y
 380 +CONFIG_DM_ETH=y
 381 +CONFIG_MEDIATEK_ETH=y
 382 +CONFIG_PINCTRL=y
 383 +CONFIG_PINCONF=y
 384 +CONFIG_PINCTRL_MT7986=y
 385 +CONFIG_POWER_DOMAIN=y
 386 +CONFIG_MTK_POWER_DOMAIN=y
 387 +CONFIG_DM_REGULATOR=y
 388 +CONFIG_DM_REGULATOR_FIXED=y
 389 +CONFIG_DM_SERIAL=y
 390 +CONFIG_MTK_SERIAL=y
 391 +CONFIG_HEXDUMP=y
 392 +CONFIG_USE_DEFAULT_ENV_FILE=y
 393 +#CONFIG_MTD_SPI_NAND=y
 394 +CONFIG_MTK_SPIM=y
 395 +#CONFIG_MTK_SNOR=y
 396 +CONFIG_DM_SPI_FLASH=y
 397 +CONFIG_SPI_FLASH_MTD=y
 398 +CONFIG_SPI_FLASH_WINBOND=y
 399 +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 400 +CONFIG_CMD_MTD=y
 401 +CONFIG_CMD_SF=y
 402 +#CONFIG_CMD_NAND=y
 403 +#CONFIG_CMD_NAND_TRIMFFS=y
 404 +# CONFIG_ENABLE_NAND_NMBM is not set
 405 --- /dev/null
 406 +++ b/configs/mt7986a_bpi-r3-sd_defconfig
 407 @@ -0,0 +1,192 @@
 408 +CONFIG_ARM=y
 409 +CONFIG_POSITION_INDEPENDENT=y
 410 +CONFIG_ARCH_MEDIATEK=y
 411 +CONFIG_TARGET_MT7986=y
 412 +CONFIG_SYS_TEXT_BASE=0x41e00000
 413 +CONFIG_SYS_MALLOC_F_LEN=0x4000
 414 +CONFIG_NR_DRAM_BANKS=1
 415 +CONFIG_DEFAULT_DEVICE_TREE="mt7986a-bpi-r3-sd"
 416 +CONFIG_DEFAULT_ENV_FILE="bananapi_bpi-r3_sdmmc_env"
 417 +CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-bpi-r3-sd.dtb"
 418 +CONFIG_OF_LIBFDT_OVERLAY=y
 419 +CONFIG_DEBUG_UART_BASE=0x11002000
 420 +CONFIG_DEBUG_UART_CLOCK=40000000
 421 +CONFIG_DEBUG_UART=y
 422 +CONFIG_SYS_LOAD_ADDR=0x46000000
 423 +CONFIG_NET_RANDOM_ETHADDR=y
 424 +CONFIG_SMBIOS_PRODUCT_NAME=""
 425 +CONFIG_AUTOBOOT_KEYED=y
 426 +CONFIG_BOOTDELAY=30
 427 +CONFIG_AUTOBOOT_MENU_SHOW=y
 428 +CONFIG_CFB_CONSOLE_ANSI=y
 429 +CONFIG_BOARD_LATE_INIT=y
 430 +CONFIG_BUTTON=y
 431 +CONFIG_BUTTON_GPIO=y
 432 +CONFIG_GPIO_HOG=y
 433 +CONFIG_CMD_ENV_FLAGS=y
 434 +CONFIG_FIT=y
 435 +CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
 436 +CONFIG_LED=y
 437 +CONFIG_LED_BLINK=y
 438 +CONFIG_LED_GPIO=y
 439 +CONFIG_LOGLEVEL=7
 440 +CONFIG_LOG=y
 441 +CONFIG_SYS_PROMPT="MT7986> "
 442 +CONFIG_CMD_BOOTMENU=y
 443 +CONFIG_CMD_BOOTP=y
 444 +CONFIG_CMD_BUTTON=y
 445 +CONFIG_CMD_CACHE=y
 446 +CONFIG_CMD_CDP=y
 447 +CONFIG_CMD_CPU=y
 448 +CONFIG_CMD_DHCP=y
 449 +CONFIG_CMD_DM=y
 450 +CONFIG_CMD_DNS=y
 451 +CONFIG_CMD_ECHO=y
 452 +CONFIG_CMD_ENV_READMEM=y
 453 +CONFIG_CMD_ERASEENV=y
 454 +CONFIG_CMD_EXT4=y
 455 +CONFIG_CMD_FAT=y
 456 +CONFIG_CMD_FDT=y
 457 +CONFIG_CMD_FS_GENERIC=y
 458 +CONFIG_CMD_FS_UUID=y
 459 +CONFIG_CMD_GPIO=y
 460 +CONFIG_CMD_GPT=y
 461 +CONFIG_CMD_HASH=y
 462 +CONFIG_CMD_ITEST=y
 463 +CONFIG_CMD_LED=y
 464 +CONFIG_CMD_LICENSE=y
 465 +CONFIG_CMD_LINK_LOCAL=y
 466 +# CONFIG_CMD_MBR is not set
 467 +CONFIG_CMD_MMC=y
 468 +CONFIG_CMD_MTD=y
 469 +CONFIG_CMD_PCI=y
 470 +CONFIG_CMD_PSTORE=y
 471 +CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
 472 +CONFIG_CMD_SF_TEST=y
 473 +CONFIG_CMD_PING=y
 474 +CONFIG_CMD_PXE=y
 475 +CONFIG_CMD_PWM=y
 476 +CONFIG_CMD_SMC=y
 477 +CONFIG_CMD_TFTPBOOT=y
 478 +CONFIG_CMD_TFTPSRV=y
 479 +CONFIG_CMD_UBI=y
 480 +CONFIG_CMD_UBI_RENAME=y
 481 +CONFIG_CMD_UBIFS=y
 482 +CONFIG_CMD_ASKENV=y
 483 +CONFIG_CMD_PART=y
 484 +CONFIG_CMD_RARP=y
 485 +CONFIG_CMD_SETEXPR=y
 486 +CONFIG_CMD_SLEEP=y
 487 +CONFIG_CMD_SNTP=y
 488 +CONFIG_CMD_SOURCE=y
 489 +CONFIG_CMD_STRINGS=y
 490 +CONFIG_CMD_USB=y
 491 +CONFIG_CMD_UUID=y
 492 +CONFIG_DISPLAY_CPUINFO=y
 493 +CONFIG_DM_MMC=y
 494 +CONFIG_DM_MTD=y
 495 +CONFIG_DM_REGULATOR=y
 496 +CONFIG_DM_REGULATOR_FIXED=y
 497 +CONFIG_DM_REGULATOR_GPIO=y
 498 +CONFIG_DM_USB=y
 499 +CONFIG_DM_PWM=y
 500 +CONFIG_PWM_MTK=y
 501 +CONFIG_HUSH_PARSER=y
 502 +CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
 503 +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 504 +CONFIG_VERSION_VARIABLE=y
 505 +CONFIG_PARTITION_UUIDS=y
 506 +CONFIG_NETCONSOLE=y
 507 +CONFIG_REGMAP=y
 508 +CONFIG_SYSCON=y
 509 +CONFIG_CLK=y
 510 +CONFIG_DM_GPIO=y
 511 +CONFIG_DM_SCSI=y
 512 +CONFIG_AHCI=y
 513 +CONFIG_AHCI_PCI=y
 514 +CONFIG_SCSI_AHCI=y
 515 +CONFIG_SCSI=y
 516 +CONFIG_CMD_SCSI=y
 517 +CONFIG_PHY=y
 518 +CONFIG_PHY_MTK_TPHY=y
 519 +CONFIG_PHY_FIXED=y
 520 +CONFIG_MTK_AHCI=y
 521 +CONFIG_DM_ETH=y
 522 +CONFIG_MEDIATEK_ETH=y
 523 +CONFIG_PCI=y
 524 +CONFIG_MTD=y
 525 +CONFIG_MTD_UBI_FASTMAP=y
 526 +CONFIG_DM_PCI=y
 527 +CONFIG_PCIE_MEDIATEK=y
 528 +CONFIG_PINCTRL=y
 529 +CONFIG_PINCONF=y
 530 +CONFIG_PINCTRL_MT7622=y
 531 +CONFIG_POWER_DOMAIN=y
 532 +CONFIG_PRE_CONSOLE_BUFFER=y
 533 +CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
 534 +CONFIG_MTK_POWER_DOMAIN=y
 535 +CONFIG_RAM=y
 536 +CONFIG_DM_SERIAL=y
 537 +CONFIG_MTK_SERIAL=y
 538 +CONFIG_MMC=y
 539 +CONFIG_MMC_DEFAULT_DEV=1
 540 +CONFIG_MMC_HS200_SUPPORT=y
 541 +CONFIG_MMC_MTK=y
 542 +CONFIG_MMC_SUPPORTS_TUNING=y
 543 +CONFIG_SUPPORT_EMMC_BOOT=y
 544 +CONFIG_SPI=y
 545 +CONFIG_DM_SPI=y
 546 +CONFIG_MTK_SPI_NAND=y
 547 +CONFIG_MTK_SPI_NAND_MTD=y
 548 +CONFIG_SYSRESET_WATCHDOG=y
 549 +CONFIG_WDT_MTK=y
 550 +CONFIG_LZO=y
 551 +CONFIG_ZSTD=y
 552 +CONFIG_HEXDUMP=y
 553 +CONFIG_RANDOM_UUID=y
 554 +CONFIG_REGEX=y
 555 +CONFIG_USB=y
 556 +CONFIG_USB_HOST=y
 557 +CONFIG_USB_XHCI_HCD=y
 558 +CONFIG_USB_XHCI_MTK=y
 559 +CONFIG_USB_STORAGE=y
 560 +CONFIG_OF_EMBED=y
 561 +CONFIG_ENV_OVERWRITE=y
 562 +CONFIG_ENV_IS_IN_MMC=y
 563 +CONFIG_ENV_OFFSET=0x400000
 564 +CONFIG_ENV_OFFSET_REDUND=0x440000
 565 +CONFIG_ENV_SIZE=0x40000
 566 +CONFIG_ENV_SIZE_REDUND=0x40000
 567 +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 568 +CONFIG_NET_RANDOM_ETHADDR=y
 569 +CONFIG_REGMAP=y
 570 +CONFIG_SYSCON=y
 571 +CONFIG_CLK=y
 572 +CONFIG_SUPPORT_EMMC_BOOT=y
 573 +CONFIG_MMC_HS200_SUPPORT=y
 574 +CONFIG_MMC_MTK=y
 575 +CONFIG_PHY_FIXED=y
 576 +CONFIG_DM_ETH=y
 577 +CONFIG_MEDIATEK_ETH=y
 578 +CONFIG_PINCTRL=y
 579 +CONFIG_PINCONF=y
 580 +CONFIG_PINCTRL_MT7986=y
 581 +CONFIG_POWER_DOMAIN=y
 582 +CONFIG_MTK_POWER_DOMAIN=y
 583 +CONFIG_DM_REGULATOR=y
 584 +CONFIG_DM_REGULATOR_FIXED=y
 585 +CONFIG_DM_SERIAL=y
 586 +CONFIG_MTK_SERIAL=y
 587 +CONFIG_HEXDUMP=y
 588 +CONFIG_USE_DEFAULT_ENV_FILE=y
 589 +CONFIG_MTD_SPI_NAND=y
 590 +CONFIG_MTK_SPIM=y
 591 +#CONFIG_MTK_SNOR=y
 592 +CONFIG_DM_SPI_FLASH=y
 593 +CONFIG_SPI_FLASH_MTD=y
 594 +CONFIG_SPI_FLASH_WINBOND=y
 595 +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 596 +CONFIG_CMD_MTD=y
 597 +CONFIG_CMD_SF=y
 598 +CONFIG_CMD_NAND=y
 599 +CONFIG_CMD_NAND_TRIMFFS=y
 600 +# CONFIG_ENABLE_NAND_NMBM is not set
 601 --- /dev/null
 602 +++ b/configs/mt7986a_bpi-r3-snand_defconfig
 603 @@ -0,0 +1,193 @@
 604 +CONFIG_ARM=y
 605 +CONFIG_POSITION_INDEPENDENT=y
 606 +CONFIG_ARCH_MEDIATEK=y
 607 +CONFIG_TARGET_MT7986=y
 608 +CONFIG_SYS_TEXT_BASE=0x41e00000
 609 +CONFIG_SYS_MALLOC_F_LEN=0x4000
 610 +CONFIG_NR_DRAM_BANKS=1
 611 +CONFIG_DEFAULT_DEVICE_TREE="mt7986a-bpi-r3-emmc"
 612 +CONFIG_DEFAULT_ENV_FILE="bananapi_bpi-r3_snand_env"
 613 +CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-bpi-r3-emmc.dtb"
 614 +CONFIG_OF_LIBFDT_OVERLAY=y
 615 +CONFIG_DEBUG_UART_BASE=0x11002000
 616 +CONFIG_DEBUG_UART_CLOCK=40000000
 617 +CONFIG_DEBUG_UART=y
 618 +CONFIG_SYS_LOAD_ADDR=0x46000000
 619 +CONFIG_NET_RANDOM_ETHADDR=y
 620 +CONFIG_SMBIOS_PRODUCT_NAME=""
 621 +CONFIG_AUTOBOOT_KEYED=y
 622 +CONFIG_BOOTDELAY=30
 623 +CONFIG_AUTOBOOT_MENU_SHOW=y
 624 +CONFIG_CFB_CONSOLE_ANSI=y
 625 +CONFIG_BOARD_LATE_INIT=y
 626 +CONFIG_BUTTON=y
 627 +CONFIG_BUTTON_GPIO=y
 628 +CONFIG_GPIO_HOG=y
 629 +CONFIG_CMD_ENV_FLAGS=y
 630 +CONFIG_FIT=y
 631 +CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
 632 +CONFIG_LED=y
 633 +CONFIG_LED_BLINK=y
 634 +CONFIG_LED_GPIO=y
 635 +CONFIG_LOGLEVEL=7
 636 +CONFIG_LOG=y
 637 +CONFIG_SYS_PROMPT="MT7986> "
 638 +CONFIG_CMD_BOOTMENU=y
 639 +CONFIG_CMD_BOOTP=y
 640 +CONFIG_CMD_BUTTON=y
 641 +CONFIG_CMD_CACHE=y
 642 +CONFIG_CMD_CDP=y
 643 +CONFIG_CMD_CPU=y
 644 +CONFIG_CMD_DHCP=y
 645 +CONFIG_CMD_DM=y
 646 +CONFIG_CMD_DNS=y
 647 +CONFIG_CMD_ECHO=y
 648 +CONFIG_CMD_ENV_READMEM=y
 649 +CONFIG_CMD_ERASEENV=y
 650 +CONFIG_CMD_EXT4=y
 651 +CONFIG_CMD_FAT=y
 652 +CONFIG_CMD_FDT=y
 653 +CONFIG_CMD_FS_GENERIC=y
 654 +CONFIG_CMD_FS_UUID=y
 655 +CONFIG_CMD_GPIO=y
 656 +CONFIG_CMD_GPT=y
 657 +CONFIG_CMD_HASH=y
 658 +CONFIG_CMD_ITEST=y
 659 +CONFIG_CMD_LED=y
 660 +CONFIG_CMD_LICENSE=y
 661 +CONFIG_CMD_LINK_LOCAL=y
 662 +# CONFIG_CMD_MBR is not set
 663 +CONFIG_CMD_MMC=y
 664 +CONFIG_CMD_MTD=y
 665 +CONFIG_CMD_PCI=y
 666 +CONFIG_CMD_PSTORE=y
 667 +CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
 668 +CONFIG_CMD_SF_TEST=y
 669 +CONFIG_CMD_PING=y
 670 +CONFIG_CMD_PXE=y
 671 +CONFIG_CMD_PWM=y
 672 +CONFIG_CMD_SMC=y
 673 +CONFIG_CMD_TFTPBOOT=y
 674 +CONFIG_CMD_TFTPSRV=y
 675 +CONFIG_CMD_UBI=y
 676 +CONFIG_CMD_UBI_RENAME=y
 677 +CONFIG_CMD_UBIFS=y
 678 +CONFIG_CMD_ASKENV=y
 679 +CONFIG_CMD_PART=y
 680 +CONFIG_CMD_RARP=y
 681 +CONFIG_CMD_SETEXPR=y
 682 +CONFIG_CMD_SLEEP=y
 683 +CONFIG_CMD_SNTP=y
 684 +CONFIG_CMD_SOURCE=y
 685 +CONFIG_CMD_STRINGS=y
 686 +CONFIG_CMD_USB=y
 687 +CONFIG_CMD_UUID=y
 688 +CONFIG_DISPLAY_CPUINFO=y
 689 +CONFIG_DM_MMC=y
 690 +CONFIG_DM_MTD=y
 691 +CONFIG_DM_REGULATOR=y
 692 +CONFIG_DM_REGULATOR_FIXED=y
 693 +CONFIG_DM_REGULATOR_GPIO=y
 694 +CONFIG_DM_USB=y
 695 +CONFIG_DM_PWM=y
 696 +CONFIG_PWM_MTK=y
 697 +CONFIG_HUSH_PARSER=y
 698 +CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
 699 +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 700 +CONFIG_VERSION_VARIABLE=y
 701 +CONFIG_PARTITION_UUIDS=y
 702 +CONFIG_NETCONSOLE=y
 703 +CONFIG_REGMAP=y
 704 +CONFIG_SYSCON=y
 705 +CONFIG_CLK=y
 706 +CONFIG_DM_GPIO=y
 707 +CONFIG_DM_SCSI=y
 708 +CONFIG_AHCI=y
 709 +CONFIG_AHCI_PCI=y
 710 +CONFIG_SCSI_AHCI=y
 711 +CONFIG_SCSI=y
 712 +CONFIG_CMD_SCSI=y
 713 +CONFIG_PHY=y
 714 +CONFIG_PHY_MTK_TPHY=y
 715 +CONFIG_PHY_FIXED=y
 716 +CONFIG_MTK_AHCI=y
 717 +CONFIG_DM_ETH=y
 718 +CONFIG_MEDIATEK_ETH=y
 719 +CONFIG_PCI=y
 720 +CONFIG_MTD=y
 721 +CONFIG_MTD_UBI_FASTMAP=y
 722 +CONFIG_DM_PCI=y
 723 +CONFIG_PCIE_MEDIATEK=y
 724 +CONFIG_PINCTRL=y
 725 +CONFIG_PINCONF=y
 726 +CONFIG_PINCTRL_MT7622=y
 727 +CONFIG_POWER_DOMAIN=y
 728 +CONFIG_PRE_CONSOLE_BUFFER=y
 729 +CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
 730 +CONFIG_MTK_POWER_DOMAIN=y
 731 +CONFIG_RAM=y
 732 +CONFIG_DM_SERIAL=y
 733 +CONFIG_MTK_SERIAL=y
 734 +CONFIG_MMC=y
 735 +CONFIG_MMC_DEFAULT_DEV=1
 736 +CONFIG_MMC_HS200_SUPPORT=y
 737 +CONFIG_MMC_MTK=y
 738 +CONFIG_MMC_SUPPORTS_TUNING=y
 739 +CONFIG_SUPPORT_EMMC_BOOT=y
 740 +CONFIG_SPI=y
 741 +CONFIG_DM_SPI=y
 742 +CONFIG_MTK_SPI_NAND=y
 743 +CONFIG_MTK_SPI_NAND_MTD=y
 744 +CONFIG_SYSRESET_WATCHDOG=y
 745 +CONFIG_WDT_MTK=y
 746 +CONFIG_LZO=y
 747 +CONFIG_ZSTD=y
 748 +CONFIG_HEXDUMP=y
 749 +CONFIG_RANDOM_UUID=y
 750 +CONFIG_REGEX=y
 751 +CONFIG_USB=y
 752 +CONFIG_USB_HOST=y
 753 +CONFIG_USB_XHCI_HCD=y
 754 +CONFIG_USB_XHCI_MTK=y
 755 +CONFIG_USB_STORAGE=y
 756 +CONFIG_OF_EMBED=y
 757 +CONFIG_ENV_OVERWRITE=y
 758 +CONFIG_ENV_IS_IN_UBI=y
 759 +CONFIG_ENV_UBI_PART="ubi"
 760 +CONFIG_ENV_SIZE=0x1f000
 761 +CONFIG_ENV_SIZE_REDUND=0x1f000
 762 +CONFIG_ENV_UBI_VOLUME="ubootenv"
 763 +CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
 764 +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 765 +CONFIG_NET_RANDOM_ETHADDR=y
 766 +CONFIG_REGMAP=y
 767 +CONFIG_SYSCON=y
 768 +CONFIG_CLK=y
 769 +CONFIG_SUPPORT_EMMC_BOOT=y
 770 +CONFIG_MMC_HS200_SUPPORT=y
 771 +CONFIG_MMC_MTK=y
 772 +CONFIG_PHY_FIXED=y
 773 +CONFIG_DM_ETH=y
 774 +CONFIG_MEDIATEK_ETH=y
 775 +CONFIG_PINCTRL=y
 776 +CONFIG_PINCONF=y
 777 +CONFIG_PINCTRL_MT7986=y
 778 +CONFIG_POWER_DOMAIN=y
 779 +CONFIG_MTK_POWER_DOMAIN=y
 780 +CONFIG_DM_REGULATOR=y
 781 +CONFIG_DM_REGULATOR_FIXED=y
 782 +CONFIG_DM_SERIAL=y
 783 +CONFIG_MTK_SERIAL=y
 784 +CONFIG_HEXDUMP=y
 785 +CONFIG_USE_DEFAULT_ENV_FILE=y
 786 +CONFIG_MTD_SPI_NAND=y
 787 +CONFIG_MTK_SPIM=y
 788 +#CONFIG_MTK_SNOR=y
 789 +#CONFIG_DM_SPI_FLASH=y
 790 +#CONFIG_SPI_FLASH_MTD=y
 791 +#CONFIG_SPI_FLASH_WINBOND=y
 792 +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 793 +CONFIG_CMD_MTD=y
 794 +#CONFIG_CMD_SF=y
 795 +CONFIG_CMD_NAND=y
 796 +CONFIG_CMD_NAND_TRIMFFS=y
 797 +# CONFIG_ENABLE_NAND_NMBM is not set
 798 --- /dev/null
 799 +++ b/arch/arm/dts/mt7986a-bpi-r3-emmc.dts
 800 @@ -0,0 +1,33 @@
 801 +// SPDX-License-Identifier: GPL-2.0
 802 +/*
 803 + * Copyright (c) 2021 MediaTek Inc.
 804 + * Author: Sam Shih <sam.shih@mediatek.com>
 805 + */
 806 +
 807 +/dts-v1/;
 808 +#include "mt7986a-bpi-r3-sd.dts"
 809 +#include <dt-bindings/gpio/gpio.h>
 810 +/ {
 811 +       reg_1p8v: regulator-1p8v {
 812 +               compatible = "regulator-fixed";
 813 +               regulator-name = "fixed-1.8V";
 814 +               regulator-min-microvolt = <1800000>;
 815 +               regulator-max-microvolt = <1800000>;
 816 +               regulator-boot-on;
 817 +               regulator-always-on;
 818 +       };
 819 +};
 820 +
 821 +&mmc0 {
 822 +       pinctrl-names = "default";
 823 +       pinctrl-0 = <&mmc0_pins_default>;
 824 +       bus-width = <8>;
 825 +       max-frequency = <200000000>;
 826 +       cap-mmc-highspeed;
 827 +       cap-mmc-hw-reset;
 828 +       vmmc-supply = <&reg_3p3v>;
 829 +       vqmmc-supply = <&reg_1p8v>;
 830 +       non-removable;
 831 +       status = "okay";
 832 +};
 833 +
 834 --- /dev/null
 835 +++ b/arch/arm/dts/mt7986a-bpi-r3-sd.dts
 836 @@ -0,0 +1,269 @@
 837 +// SPDX-License-Identifier: GPL-2.0
 838 +/*
 839 + * Copyright (c) 2021 MediaTek Inc.
 840 + * Author: Sam Shih <sam.shih@mediatek.com>
 841 + */
 842 +
 843 +/dts-v1/;
 844 +#include "mt7986.dtsi"
 845 +#include <dt-bindings/gpio/gpio.h>
 846 +
 847 +/ {
 848 +       #address-cells = <1>;
 849 +       #size-cells = <1>;
 850 +       model = "BananaPi BPi-R3";
 851 +       compatible = "mediatek,mt7986", "mediatek,mt7986-sd-rfb";
 852 +
 853 +       chosen {
 854 +               stdout-path = &uart0;
 855 +               tick-timer = &timer0;
 856 +       };
 857 +
 858 +       reg_3p3v: regulator-3p3v {
 859 +               compatible = "regulator-fixed";
 860 +               regulator-name = "fixed-3.3V";
 861 +               regulator-min-microvolt = <3300000>;
 862 +               regulator-max-microvolt = <3300000>;
 863 +               regulator-boot-on;
 864 +               regulator-always-on;
 865 +       };
 866 +
 867 +       keys {
 868 +               compatible = "gpio-keys";
 869 +/*
 870 +               factory {
 871 +                       label = "reset";
 872 +                       gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
 873 +               };
 874 +*/
 875 +               wps {
 876 +                       label = "reset";
 877 +                       gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
 878 +               };
 879 +       };
 880 +
 881 +       leds {
 882 +               compatible = "gpio-leds";
 883 +
 884 +               led_status_green: green {
 885 +                       label = "green:status";
 886 +                       gpios = <&gpio 69 GPIO_ACTIVE_HIGH>;
 887 +               };
 888 +
 889 +               led_status_blue: blue {
 890 +                       label = "blue:status";
 891 +                       gpios = <&gpio 86 GPIO_ACTIVE_HIGH>;
 892 +               };
 893 +       };
 894 +
 895 +};
 896 +
 897 +&uart0 {
 898 +       status = "okay";
 899 +};
 900 +
 901 +&uart1 {
 902 +       pinctrl-names = "default";
 903 +       pinctrl-0 = <&uart1_pins>;
 904 +       status = "disabled";
 905 +};
 906 +
 907 +&eth {
 908 +       status = "okay";
 909 +       mediatek,gmac-id = <0>;
 910 +       phy-mode = "sgmii";
 911 +       mediatek,switch = "mt7531";
 912 +       reset-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
 913 +
 914 +       fixed-link {
 915 +               speed = <1000>;
 916 +               full-duplex;
 917 +       };
 918 +};
 919 +
 920 +&pinctrl {
 921 +       spic_pins: spi1-pins-func-1 {
 922 +               mux {
 923 +                       function = "spi";
 924 +                       groups = "spi1_2";
 925 +               };
 926 +       };
 927 +
 928 +       uart1_pins: spi1-pins-func-3 {
 929 +               mux {
 930 +                       function = "uart";
 931 +                       groups = "uart1_2";
 932 +               };
 933 +       };
 934 +
 935 +       pwm_pins: pwm0-pins-func-1 {
 936 +               mux {
 937 +                       function = "pwm";
 938 +                       groups = "pwm0";
 939 +               };
 940 +       };
 941 +
 942 +       mmc0_pins_default: mmc0default {
 943 +               mux {
 944 +                       function = "flash";
 945 +                       groups =  "emmc_51";
 946 +               };
 947 +
 948 +               conf-cmd-dat {
 949 +                       pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
 950 +                              "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
 951 +                              "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
 952 +                       input-enable;
 953 +                       drive-strength = <MTK_DRIVE_4mA>;
 954 +                       bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 955 +               };
 956 +
 957 +               conf-clk {
 958 +                       pins = "EMMC_CK";
 959 +                       drive-strength = <MTK_DRIVE_6mA>;
 960 +                       bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 961 +               };
 962 +
 963 +               conf-dsl {
 964 +                       pins = "EMMC_DSL";
 965 +                       bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 966 +               };
 967 +
 968 +               conf-rst {
 969 +                       pins = "EMMC_RSTB";
 970 +                       drive-strength = <MTK_DRIVE_4mA>;
 971 +                       bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 972 +               };
 973 +       };
 974 +
 975 +       spi_flash_pins: spi0-pins-func-1 {
 976 +               mux {
 977 +                       function = "flash";
 978 +                       groups = "spi0", "spi0_wp_hold";
 979 +               };
 980 +
 981 +               conf-pu {
 982 +                       pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
 983 +                       drive-strength = <MTK_DRIVE_8mA>;
 984 +                       bias-pull-up = <MTK_PUPD_SET_R1R0_00>;
 985 +               };
 986 +
 987 +               conf-pd {
 988 +                       pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
 989 +                       drive-strength = <MTK_DRIVE_8mA>;
 990 +                       bias-pull-down = <MTK_PUPD_SET_R1R0_00>;
 991 +               };
 992 +       };
 993 +};
 994 +
 995 +&pwm {
 996 +       pinctrl-names = "default";
 997 +       pinctrl-0 = <&pwm_pins>;
 998 +       status = "okay";
 999 +};
1000 +
1001 +&spi0 {
1002 +       #address-cells = <1>;
1003 +       #size-cells = <0>;
1004 +       pinctrl-names = "default";
1005 +       pinctrl-0 = <&spi_flash_pins>;
1006 +       status = "okay";
1007 +       must_tx;
1008 +       enhance_timing;
1009 +       dma_ext;
1010 +       ipm_design;
1011 +       support_quad;
1012 +       tick_dly = <1>;
1013 +       sample_sel = <0>;
1014 +
1015 +       spi_nor@0 {
1016 +               compatible = "jedec,spi-nor";
1017 +               reg = <0>;
1018 +               spi-max-frequency = <52000000>;
1019 +
1020 +               partitions {
1021 +                       compatible = "fixed-partitions";
1022 +                       #address-cells = <1>;
1023 +                       #size-cells = <1>;
1024 +
1025 +                       partition@0 {
1026 +                               label = "bl2";
1027 +                               reg = <0x0 0x40000>;
1028 +                       };
1029 +
1030 +                       partition@40000 {
1031 +                               label = "u-boot-env";
1032 +                               reg = <0x40000 0x40000>;
1033 +                       };
1034 +
1035 +                       partition@80000 {
1036 +                               label = "reserved";
1037 +                               reg = <0x80000 0x80000>;
1038 +                       };
1039 +
1040 +                       partition@100000 {
1041 +                               label = "fip";
1042 +                               reg = <0x100000 0x80000>;
1043 +                       };
1044 +
1045 +                       partition@180000 {
1046 +                               label = "recovery";
1047 +                               reg = <0x180000 0xa80000>;
1048 +                       };
1049 +
1050 +                       partition@c00000 {
1051 +                               label = "fit";
1052 +                               reg = <0xc00000 0x1400000>;
1053 +                       };
1054 +               };
1055 +       };
1056 +
1057 +       spi_nand@1 {
1058 +               compatible = "spi-nand";
1059 +               reg = <1>;
1060 +               spi-max-frequency = <52000000>;
1061 +
1062 +               partitions {
1063 +                       compatible = "fixed-partitions";
1064 +                       #address-cells = <1>;
1065 +                       #size-cells = <1>;
1066 +
1067 +                       partition@0 {
1068 +                               label = "bl2";
1069 +                               reg = <0x0 0x80000>;
1070 +                       };
1071 +
1072 +                       partition@80000 {
1073 +                               label = "factory";
1074 +                               reg = <0x80000 0x300000>;
1075 +                       };
1076 +
1077 +                       partition@380000 {
1078 +                               label = "fip";
1079 +                               reg = <0x380000 0x200000>;
1080 +                       };
1081 +
1082 +                       partition@580000 {
1083 +                               label = "ubi";
1084 +                               reg = <0x580000 0x7a80000>;
1085 +                       };
1086 +               };
1087 +       };
1088 +};
1089 +
1090 +&watchdog {
1091 +       status = "disabled";
1092 +};
1093 +
1094 +&mmc0 {
1095 +       pinctrl-names = "default";
1096 +       pinctrl-0 = <&mmc0_pins_default>;
1097 +       bus-width = <4>;
1098 +       max-frequency = <52000000>;
1099 +       cap-sd-highspeed;
1100 +       r_smpl = <1>;
1101 +       vmmc-supply = <&reg_3p3v>;
1102 +       vqmmc-supply = <&reg_3p3v>;
1103 +       status = "okay";
1104 +};
1105 +
1106 --- /dev/null
1107 +++ b/bananapi_bpi-r3_sdmmc_env
1108 @@ -0,0 +1,75 @@
1109 +ipaddr=192.168.1.1
1110 +serverip=192.168.1.254
1111 +loadaddr=0x46000000
1112 +console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
1113 +bootargs=root=/dev/mmcblk0p65
1114 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_sdmmc ; fi
1115 +bootconf=config-mt7986a-bananapi-bpi-r3
1116 +bootdelay=0
1117 +bootfile=openwrt-mediatek-filogic-bananapi_bpi-r3-initramfs-recovery.itb
1118 +bootfile_upg=openwrt-mediatek-filogic-bananapi_bpi-r3-squashfs-sysupgrade.itb
1119 +bootled_pwr=green:status
1120 +bootled_rec=blue:status
1121 +bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
1122 +bootmenu_default=0
1123 +bootmenu_delay=0
1124 +bootmenu_title=      \e[0;34m( ( ( \e[1;39mOpenWrt\e[0;34m ) ) )  \e[0;36m[SD card]\e[0m
1125 +bootmenu_0=Initialize environment.=run _firstboot
1126 +bootmenu_0d=Run default boot command.=run boot_default
1127 +bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
1128 +bootmenu_2=Boot production system from SD card.=run boot_production ; run bootmenu_confirm_return
1129 +bootmenu_3=Boot recovery system from SD card.=run boot_recovery ; run bootmenu_confirm_return
1130 +bootmenu_4=Load production system via TFTP then write to SD card.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
1131 +bootmenu_5=Load recovery system via TFTP then write to SD card.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
1132 +bootmenu_6=\e[31mInstall bootloader, recovery and production to NOR.\e[0m=if sf probe ; then run nor_init ; else echo "NOR not detected" ; fi ; run bootmenu_confirm_return
1133 +bootmenu_7=\e[31mInstall bootloader, recovery and production to NAND.\e[0m=if nand info ; then run ubi_init ; else echo "NAND not detected" ; fi ; run bootmenu_confirm_return
1134 +bootmenu_8=Reboot.=reset
1135 +bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
1136 +boot_update_conf=if nand info ; then setenv bootconf config-mt7986a-bananapi-bpi-r3-snand ; else if sf probe ; then setenv bootconf config-mt7986a-bananapi-bpi-r3-nor ; else setenv bootconf config-mt7986a-bananapi-bpi-r3 ; fi ; fi
1137 +boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
1138 +boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
1139 +boot_production=led $bootled_pwr on ; run boot_update_conf ; run sdmmc_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
1140 +boot_recovery=led $bootled_rec on ; run boot_update_conf ; run sdmmc_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off
1141 +boot_sdmmc=run boot_production ; run boot_recovery
1142 +boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
1143 +boot_tftp_production=run boot_update_conf ; tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run sdmmc_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
1144 +boot_tftp_recovery=run boot_update_conf ; tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run sdmmc_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
1145 +boot_tftp=run boot_update_conf ; tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
1146 +mmc_write_vol=imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc erase 0x$part_addr 0x$part_size && mmc write $loadaddr 0x$part_addr 0x$image_size
1147 +mmc_read_vol=mmc read $loadaddr $part_addr 0x8 && imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc read $loadaddr 0x$part_addr 0x$image_size && setexpr filesize $image_size * 0x200
1148 +part_default=production
1149 +part_recovery=recovery
1150 +reset_factory=eraseenv && reset
1151 +sdmmc_read_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_read_vol
1152 +sdmmc_read_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_read_vol
1153 +sdmmc_read_snand_bl2=part start mmc 0 install part_addr && mmc read $loadaddr $part_addr 0x400
1154 +sdmmc_read_snand_fip=part start mmc 0 install part_addr && setexpr offset $part_addr + 0x800 && mmc read $loadaddr $offset 0x1000
1155 +sdmmc_read_nor_bl2=part start mmc 0 install part_addr && setexpr offset $part_addr + 0x2800 && mmc read $loadaddr $offset 0x400
1156 +sdmmc_read_nor_fip=part start mmc 0 install part_addr && setexpr offset $part_addr + 0x3000 && mmc read $loadaddr $offset 0x1000
1157 +sdmmc_read_emmc_install=part start mmc 0 install part_addr && setexpr offset $part_addr + 0x3800 && mmc read $loadaddr $offset 0x4000
1158 +sdmmc_write_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_write_vol
1159 +sdmmc_write_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_write_vol
1160 +mtd_write_fip=mtd erase fip && mtd write fip $loadaddr
1161 +mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr
1162 +nor_pad_size=imsz $loadaddr image_size ; setexpr image_eb 0x$image_size / 0x10000 ; setexpr tmp1 0x$image_size % 0x10000 ; test 0x$tmp1 -gt 0 && setexpr image_eb 0x$image_eb + 1 ; setexpr image_eb $image_eb * 0x10000
1163 +nor_erase_env=mtd erase u-boot-env
1164 +nor_write_production=run nor_pad_size ; test 0x$image_eb -le 0x3000000 && mtd erase fit && mtd write fit $loadaddr 0x0 $image_eb
1165 +nor_write_recovery=run nor_pad_size ; test 0x$image_eb -le 0x900000 && mtd erase recovery 0x0 0x$image_eb && mtd write recovery $loadaddr 0x0 $image_eb
1166 +nor_init=run nor_init_bl && run nor_init_openwrt
1167 +nor_init_bl=run sdmmc_read_nor_bl2 && run mtd_write_bl2 && run sdmmc_read_nor_fip && run mtd_write_fip && run nor_erase_env
1168 +nor_init_openwrt=run sdmmc_read_recovery && iminfo $loadaddr && run nor_write_recovery ; run sdmmc_read_production && iminfo $loadaddr && run nor_write_production
1169 +ubi_create_env=ubi create ubootenv 0x100000 dynamic 0 ; ubi create ubootenv2 0x100000 dynamic 1
1170 +ubi_format=ubi detach ; mtd erase ubi && ubi part ubi
1171 +ubi_init=run ubi_init_bl && run ubi_format && run ubi_create_env && run ubi_init_openwrt && run ubi_init_emmc_install
1172 +ubi_init_openwrt=run sdmmc_read_recovery && iminfo $loadaddr && run ubi_write_recovery ; run sdmmc_read_production && iminfo $loadaddr && run ubi_write_production
1173 +ubi_init_bl=run sdmmc_read_snand_bl2 && run mtd_write_bl2 && run sdmmc_read_snand_fip && run mtd_write_fip
1174 +ubi_init_emmc_install=run sdmmc_read_emmc_install && run ubi_write_emmc_install
1175 +ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
1176 +ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
1177 +ubi_write_emmc_install=ubi check emmc_install && ubi remote emmc_install ; ubi create emmc_install 0x800000 dynamic ; ubi write $loadaddr emmc_install 0x800000
1178 +ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic 2 && ubi write $loadaddr fit $filesize
1179 +ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic 3 && ubi write $loadaddr recovery $filesize
1180 +_init_env=setenv _init_env ; setenv _create_env ; saveenv ; saveenv
1181 +_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first
1182 +_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
1183 +_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       \e[33m$ver\e[0m"
1184 --- /dev/null
1185 +++ b/bananapi_bpi-r3_nor_env
1186 @@ -0,0 +1,55 @@
1187 +ipaddr=192.168.1.1
1188 +serverip=192.168.1.254
1189 +loadaddr=0x46000000
1190 +console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
1191 +bootargs=root=/dev/mtdblock0p1
1192 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_nor ; fi
1193 +bootconf=config-mt7986a-bananapi-bpi-r3-emmc-nor
1194 +bootdelay=0
1195 +bootfile=openwrt-mediatek-filogic-bananapi_bpi-r3-initramfs-recovery.itb
1196 +bootfile_bl2=openwrt-mediatek-filogic-bananapi_bpi-r3-nor-preloader.bin
1197 +bootfile_fip=openwrt-mediatek-filogic-bananapi_bpi-r3-nor-bl31-uboot.fip
1198 +bootfile_upg=openwrt-mediatek-filogic-bananapi_bpi-r3-squashfs-sysupgrade.itb
1199 +bootled_pwr=green:status
1200 +bootled_rec=blue:status
1201 +bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
1202 +bootmenu_default=0
1203 +bootmenu_delay=0
1204 +bootmenu_title=      \e[0;34m( ( ( \e[1;39mOpenWrt\e[0;34m ) ) )  \e[0;36m[SPI-NOR]\e[0m
1205 +bootmenu_0=Initialize environment.=run _firstboot
1206 +bootmenu_0d=Run default boot command.=run boot_default
1207 +bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
1208 +bootmenu_2=Boot production system from flash.=run boot_production ; run bootmenu_confirm_return
1209 +bootmenu_3=Boot recovery system from flash.=run boot_recovery ; run bootmenu_confirm_return
1210 +bootmenu_4=Load production system via TFTP then write to flash.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
1211 +bootmenu_5=Load recovery system via TFTP then write to flash.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
1212 +bootmenu_6=\e[31mLoad BL31+U-Boot FIP via TFTP then write to flash.\e[0m=run boot_tftp_write_fip ; run bootmenu_confirm_return
1213 +bootmenu_7=\e[31mLoad BL2 preloader via TFTP then write to flash.\e[0m=run boot_tftp_write_preloader ; run bootmenu_confirm_return
1214 +bootmenu_8=Reboot.=reset
1215 +bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
1216 +boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
1217 +boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
1218 +boot_production=run boot_update_conf ; led $bootled_pwr on ; run nor_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
1219 +boot_recovery=run boot_update_conf ; led $bootled_rec on ; run nor_read_recovery ; bootm $loadaddr#$bootconf ; led $bootled_rec off
1220 +boot_serial_write_fip=loadx $loadaddr 115200 && run boot_write_fip
1221 +boot_serial_write_preloader=loadx $loadaddr 115200 && run boot_write_preloader
1222 +boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
1223 +boot_tftp_production=run boot_update_conf ; tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run nor_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
1224 +boot_tftp_recovery=run boot_update_conf ; tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run nor_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
1225 +boot_tftp=run boot_update_conf ; tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
1226 +boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run boot_write_fip
1227 +boot_tftp_write_preloader=tftpboot $loadaddr $bootfile_bl2 && run boot_write_preloader
1228 +boot_update_conf=if mmc partconf 0 ; then setenv bootconf config-mt7986a-bananapi-bpi-r3-emmc-nor ; else setenv bootconf config-mt7986a-bananapi-bpi-r3-nor ; fi
1229 +boot_nor=run boot_production ; run boot_recovery
1230 +boot_write_fip=mtd erase fip && mtd write fip $loadaddr
1231 +boot_write_preloader=mtd erase bl2 && mtd write bl2 $loadaddr
1232 +reset_factory=mtd erase u-boot-env
1233 +nor_read_production=mtd read fit $loadaddr 0x0 0x1000 && imsz $loadaddr image_size && mtd read fit $loadaddr 0x0 $image_size
1234 +nor_read_recovery=mtd read recovery $loadaddr 0x0 0x1000 && imsz $loadaddr image_size && mtd read recovery $loadaddr 0x0 $image_size
1235 +nor_pad_size=imsz $loadaddr image_size ; setexpr image_eb 0x$image_size / 0x10000 ; setexpr tmp1 0x$image_size % 0x10000 ; test 0x$tmp1 -gt 0 && setexpr image_eb 0x$image_eb + 1 ; setexpr image_eb $image_eb * 0x10000
1236 +nor_write_production=run nor_pad_size ; test 0x$image_eb -le 0x3000000 && mtd erase fit && mtd write fit $loadaddr 0x0 $image_eb
1237 +nor_write_recovery=run nor_pad_size ; test 0x$image_eb -le 0x900000 && mtd erase recovery 0x0 0x$image_eb && mtd write recovery $loadaddr 0x0 $image_eb
1238 +_init_env=setenv _init_env ; saveenv
1239 +_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first
1240 +_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
1241 +_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       \e[33m$ver\e[0m"
1242 --- /dev/null
1243 +++ b/bananapi_bpi-r3_snand_env
1244 @@ -0,0 +1,69 @@
1245 +ipaddr=192.168.1.1
1246 +serverip=192.168.1.254
1247 +loadaddr=0x46000000
1248 +console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
1249 +bootargs=root=/dev/ubiblock0_2p1
1250 +bootconf=config-mt7986a-bananapi-bpi-r3-snand
1251 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
1252 +bootdelay=0
1253 +bootfile=openwrt-mediatek-filogic-bananapi_bpi-r3-initramfs-recovery.itb
1254 +bootfile_bl2=openwrt-mediatek-filogic-bananapi_bpi-r3-snand-preloader.bin
1255 +bootfile_fip=openwrt-mediatek-filogic-bananapi_bpi-r3-snand-bl31-uboot.fip
1256 +bootfile_upg=openwrt-mediatek-filogic-bananapi_bpi-r3-squashfs-sysupgrade.itb
1257 +bootled_pwr=green:status
1258 +bootled_rec=blue:status
1259 +bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
1260 +bootmenu_default=0
1261 +bootmenu_delay=0
1262 +bootmenu_title=      \e[0;34m( ( ( \e[1;39mOpenWrt\e[0;34m ) ) )  \e[0;36m[SPI-NAND]\e[0m
1263 +bootmenu_0=Initialize environment.=run _firstboot
1264 +bootmenu_0d=Run default boot command.=run boot_default
1265 +bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
1266 +bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
1267 +bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
1268 +bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
1269 +bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
1270 +bootmenu_6=\e[31mLoad BL31+U-Boot FIP via TFTP then write to NAND.\e[0m=run boot_tftp_write_fip ; run bootmenu_confirm_return
1271 +bootmenu_7=\e[31mLoad BL2 preloader via TFTP then write to NAND.\e[0m=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
1272 +bootmenu_8=\e[31mInstall bootloader, recovery and production to eMMC.\e[0m=if mmc partconf 0 ; then run emmc_init ; else echo "eMMC not detected" ; fi ; run bootmenu_confirm_return
1273 +bootmenu_9=Reboot.=reset
1274 +bootmenu_10=Reset all settings to factory defaults.=run reset_factory ; reset
1275 +boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
1276 +boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
1277 +boot_production=run boot_update_conf ; led $bootled_pwr on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
1278 +boot_recovery=run boot_update_conf ; led $bootled_rec on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off
1279 +boot_ubi=run boot_update_conf ; run boot_production ; run boot_recovery
1280 +boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
1281 +boot_tftp_production=run boot_update_conf ; tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
1282 +boot_tftp_recovery=run boot_update_conf ; tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
1283 +boot_tftp=run boot_update_conf ; tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
1284 +boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
1285 +boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
1286 +boot_update_conf=if mmc partconf 0 ; then setenv bootconf config-mt7986a-bananapi-bpi-r3-emmc-snand ; else setenv bootconf config-mt7986a-bananapi-bpi-r3-snand ; fi
1287 +part_default=production
1288 +part_recovery=recovery
1289 +reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
1290 +mtd_write_fip=mtd erase fip && mtd write fip $loadaddr
1291 +mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr
1292 +ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic 0 ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic 1
1293 +ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset
1294 +ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
1295 +ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs
1296 +ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
1297 +ubi_read_emmc_install=ubi check emmc_install && ubi read $loadaddr emmc_install
1298 +ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
1299 +ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic 2 && ubi write $loadaddr fit $filesize
1300 +ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic 3 && ubi write $loadaddr recovery $filesize
1301 +mmc_write_vol=imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc erase 0x$part_addr 0x$part_size && mmc write $loadaddr 0x$part_addr 0x$image_size
1302 +emmc_init=mmc dev 0 && mmc bootbus 0 0 0 0 && run emmc_init_bl && run emmc_init_openwrt ; env default bootcmd ; saveenv ; saveenv
1303 +emmc_init_bl=run ubi_read_emmc_install && setenv fileaddr $loadaddr && run emmc_write_bl2 && setexpr fileaddr $loadaddr + 0x100000 && run emmc_write_fip && setexpr fileaddr $loadaddr + 0x500000 && run emmc_write_hdr
1304 +emmc_init_openwrt=run ubi_read_recovery && iminfo $loadaddr && run emmc_write_recovery ; run ubi_read_production && iminfo $loadaddr && run emmc_write_production
1305 +emmc_write_bl2=mmc partconf 0 1 1 1 && mmc erase 0x0 0x400 && mmc write $fileaddr 0x0 0x400 ; mmc partconf 0 1 1 0
1306 +emmc_write_fip=mmc erase 0x3400 0x2000 && mmc write $fileaddr 0x3400 0x2000 && mmc erase 0x2000 0x800
1307 +emmc_write_hdr=mmc erase 0x0 0x40 && mmc write $fileaddr 0x0 0x40
1308 +emmc_write_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_write_vol
1309 +emmc_write_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_write_vol
1310 +_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
1311 +_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first
1312 +_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
1313 +_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       \e[33m$ver\e[0m"
1314 --- /dev/null
1315 +++ b/bananapi_bpi-r3_emmc_env
1316 @@ -0,0 +1,56 @@
1317 +ipaddr=192.168.1.1
1318 +serverip=192.168.1.254
1319 +loadaddr=0x46000000
1320 +console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
1321 +bootargs=root=/dev/mmcblk0p65
1322 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_emmc ; fi
1323 +bootconf=config-mt7986a-bananapi-bpi-r3-emmc
1324 +bootdelay=0
1325 +bootfile=openwrt-mediatek-filogic-bananapi_bpi-r3-initramfs-recovery.itb
1326 +bootfile_bl2=openwrt-mediatek-filogic-bananapi_bpi-r3-emmc-preloader.bin
1327 +bootfile_fip=openwrt-mediatek-filogic-bananapi_bpi-r3-emmc-bl31-uboot.fip
1328 +bootfile_upg=openwrt-mediatek-filogic-bananapi_bpi-r3-squashfs-sysupgrade.itb
1329 +bootled_pwr=green:status
1330 +bootled_rec=blue:status
1331 +bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
1332 +bootmenu_default=0
1333 +bootmenu_delay=0
1334 +bootmenu_title=      \e[0;34m( ( ( \e[1;39mOpenWrt\e[0;34m ) ) )  \e[0;36m[eMMC]\e[0m
1335 +bootmenu_0=Initialize environment.=run _firstboot
1336 +bootmenu_0d=Run default boot command.=run boot_default
1337 +bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
1338 +bootmenu_2=Boot production system from eMMC.=run boot_production ; run bootmenu_confirm_return
1339 +bootmenu_3=Boot recovery system from eMMC.=run boot_recovery ; run bootmenu_confirm_return
1340 +bootmenu_4=Load production system via TFTP then write to eMMC.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
1341 +bootmenu_5=Load recovery system via TFTP then write to eMMC.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
1342 +bootmenu_6=\e[31mLoad BL31+U-Boot FIP via TFTP then write to eMMC.\e[0m=run boot_tftp_write_fip ; run bootmenu_confirm_return
1343 +bootmenu_7=\e[31mLoad BL2 preloader via TFTP then write to eMMC.\e[0m=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
1344 +bootmenu_8=Reboot.=reset
1345 +bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
1346 +boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
1347 +boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
1348 +boot_production=run boot_update_conf ; led $bootled_pwr on ; run emmc_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
1349 +boot_recovery=run boot_update_conf ; led $bootled_rec on ; run emmc_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off
1350 +boot_emmc=run boot_update_conf ; run boot_production ; run boot_recovery
1351 +boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
1352 +boot_tftp_production=run boot_update_conf ; tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run emmc_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
1353 +boot_tftp_recovery=run boot_update_conf ; tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run emmc_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
1354 +boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run emmc_write_fip
1355 +boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run emmc_write_bl2
1356 +boot_tftp=run boot_update_conf ; tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
1357 +boot_update_conf=if nand info ; then setenv bootconf config-mt7986a-bananapi-bpi-r3-emmc-snand ; else setenv bootconf config-mt7986a-bananapi-bpi-r3-emmc-nor ; fi
1358 +mmc_write_vol=imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc erase 0x$part_addr 0x$part_size && mmc write $loadaddr 0x$part_addr 0x$image_size
1359 +mmc_read_vol=mmc read $loadaddr $part_addr 0x8 && imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc read $loadaddr 0x$part_addr 0x$image_size && setexpr filesize $image_size * 0x200
1360 +part_default=production
1361 +part_recovery=recovery
1362 +reset_factory=eraseenv && reset
1363 +emmc_read_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_read_vol
1364 +emmc_read_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_read_vol
1365 +emmc_write_bl2=mmc partconf 0 1 1 1 && mmc erase 0x0 0x400 && mmc write $fileaddr 0x0 0x400 ; mmc partconf 0 1 1 0
1366 +emmc_write_fip=mmc erase 0x3400 0x2000 && mmc write $fileaddr 0x3400 0x2000 && mmc erase 0x2000 0x800
1367 +emmc_write_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_write_vol
1368 +emmc_write_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_write_vol
1369 +_init_env=setenv _init_env ; setenv _create_env ; saveenv ; saveenv
1370 +_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first
1371 +_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
1372 +_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       \e[33m$ver\e[0m"