package/kernel/mac80211/patches/ath11k/0039-wifi-ath11k-push-MU-MIMO-params-from-hostapd-to-hard.patch

   1 From 38dfe775d0abf511341f37c1cb77b919a3ad410b Mon Sep 17 00:00:00 2001
   2 From: Muna Sinada <quic_msinada@quicinc.com>
   3 Date: Fri, 24 Feb 2023 12:28:04 +0200
   4 Subject: [PATCH] wifi: ath11k: push MU-MIMO params from hostapd to hardware
   5
   6 In the previous behaviour only HE IE in management frames are changed
   7 regarding MU-MIMO configurations and not in hardware. Adding push of
   8 MU-MIMO configurations to the hardware as well.
   9
  10 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00356-QCAHKSWPL_SILICONZ-1
  11
  12 Co-developed-by: Anilkumar Kolli <quic_akolli@quicinc.com>
  13 Signed-off-by: Anilkumar Kolli <quic_akolli@quicinc.com>
  14 Signed-off-by: Muna Sinada <quic_msinada@quicinc.com>
  15 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
  16 Link: https://lore.kernel.org/r/1666128501-12364-3-git-send-email-quic_msinada@quicinc.com
  17 ---
  18  drivers/net/wireless/ath/ath11k/mac.c | 200 ++++++++++++++++----------
  19  drivers/net/wireless/ath/ath11k/wmi.h |   3 +
  20  2 files changed, 130 insertions(+), 73 deletions(-)
  21
  22 --- a/drivers/net/wireless/ath/ath11k/mac.c
  23 +++ b/drivers/net/wireless/ath/ath11k/mac.c
  24 @@ -2699,6 +2699,117 @@ static int ath11k_setup_peer_smps(struct
  25                                          ath11k_smps_map[smps]);
  26  }
  27
  28 +static bool ath11k_mac_set_he_txbf_conf(struct ath11k_vif *arvif)
  29 +{
  30 +       struct ath11k *ar = arvif->ar;
  31 +       u32 param, value;
  32 +       int ret;
  33 +
  34 +       if (!arvif->vif->bss_conf.he_support)
  35 +               return true;
  36 +
  37 +       param = WMI_VDEV_PARAM_SET_HEMU_MODE;
  38 +       value = 0;
  39 +       if (arvif->vif->bss_conf.he_su_beamformer) {
  40 +               value |= FIELD_PREP(HE_MODE_SU_TX_BFER, HE_SU_BFER_ENABLE);
  41 +               if (arvif->vif->bss_conf.he_mu_beamformer &&
  42 +                   arvif->vdev_type == WMI_VDEV_TYPE_AP)
  43 +                       value |= FIELD_PREP(HE_MODE_MU_TX_BFER, HE_MU_BFER_ENABLE);
  44 +       }
  45 +
  46 +       if (arvif->vif->type != NL80211_IFTYPE_MESH_POINT) {
  47 +               value |= FIELD_PREP(HE_MODE_DL_OFDMA, HE_DL_MUOFDMA_ENABLE) |
  48 +                        FIELD_PREP(HE_MODE_UL_OFDMA, HE_UL_MUOFDMA_ENABLE);
  49 +
  50 +               if (arvif->vif->bss_conf.he_full_ul_mumimo)
  51 +                       value |= FIELD_PREP(HE_MODE_UL_MUMIMO, HE_UL_MUMIMO_ENABLE);
  52 +
  53 +               if (arvif->vif->bss_conf.he_su_beamformee)
  54 +                       value |= FIELD_PREP(HE_MODE_SU_TX_BFEE, HE_SU_BFEE_ENABLE);
  55 +       }
  56 +
  57 +       ret = ath11k_wmi_vdev_set_param_cmd(ar, arvif->vdev_id, param, value);
  58 +       if (ret) {
  59 +               ath11k_warn(ar->ab, "failed to set vdev %d HE MU mode: %d\n",
  60 +                           arvif->vdev_id, ret);
  61 +               return false;
  62 +       }
  63 +
  64 +       param = WMI_VDEV_PARAM_SET_HE_SOUNDING_MODE;
  65 +       value = FIELD_PREP(HE_VHT_SOUNDING_MODE, HE_VHT_SOUNDING_MODE_ENABLE) |
  66 +               FIELD_PREP(HE_TRIG_NONTRIG_SOUNDING_MODE,
  67 +                          HE_TRIG_NONTRIG_SOUNDING_MODE_ENABLE);
  68 +       ret = ath11k_wmi_vdev_set_param_cmd(ar, arvif->vdev_id,
  69 +                                           param, value);
  70 +       if (ret) {
  71 +               ath11k_warn(ar->ab, "failed to set vdev %d sounding mode: %d\n",
  72 +                           arvif->vdev_id, ret);
  73 +               return false;
  74 +       }
  75 +       return true;
  76 +}
  77 +
  78 +static bool ath11k_mac_vif_recalc_sta_he_txbf(struct ath11k *ar,
  79 +                                             struct ieee80211_vif *vif,
  80 +                                             struct ieee80211_sta_he_cap *he_cap)
  81 +{
  82 +       struct ath11k_vif *arvif = (void *)vif->drv_priv;
  83 +       struct ieee80211_he_cap_elem he_cap_elem = {0};
  84 +       struct ieee80211_sta_he_cap *cap_band = NULL;
  85 +       struct cfg80211_chan_def def;
  86 +       u32 param = WMI_VDEV_PARAM_SET_HEMU_MODE;
  87 +       u32 hemode = 0;
  88 +       int ret;
  89 +
  90 +       if (!vif->bss_conf.he_support)
  91 +               return true;
  92 +
  93 +       if (vif->type != NL80211_IFTYPE_STATION)
  94 +               return false;
  95 +
  96 +       if (WARN_ON(ath11k_mac_vif_chan(vif, &def)))
  97 +               return false;
  98 +
  99 +       if (def.chan->band == NL80211_BAND_2GHZ)
 100 +               cap_band = &ar->mac.iftype[NL80211_BAND_2GHZ][vif->type].he_cap;
 101 +       else
 102 +               cap_band = &ar->mac.iftype[NL80211_BAND_5GHZ][vif->type].he_cap;
 103 +
 104 +       memcpy(&he_cap_elem, &cap_band->he_cap_elem, sizeof(he_cap_elem));
 105 +
 106 +       if (HECAP_PHY_SUBFME_GET(he_cap_elem.phy_cap_info)) {
 107 +               if (HECAP_PHY_SUBFMR_GET(he_cap->he_cap_elem.phy_cap_info))
 108 +                       hemode |= FIELD_PREP(HE_MODE_SU_TX_BFEE, HE_SU_BFEE_ENABLE);
 109 +               if (HECAP_PHY_MUBFMR_GET(he_cap->he_cap_elem.phy_cap_info))
 110 +                       hemode |= FIELD_PREP(HE_MODE_MU_TX_BFEE, HE_MU_BFEE_ENABLE);
 111 +       }
 112 +
 113 +       if (vif->type != NL80211_IFTYPE_MESH_POINT) {
 114 +               hemode |= FIELD_PREP(HE_MODE_DL_OFDMA, HE_DL_MUOFDMA_ENABLE) |
 115 +                         FIELD_PREP(HE_MODE_UL_OFDMA, HE_UL_MUOFDMA_ENABLE);
 116 +
 117 +               if (HECAP_PHY_ULMUMIMO_GET(he_cap_elem.phy_cap_info))
 118 +                       if (HECAP_PHY_ULMUMIMO_GET(he_cap->he_cap_elem.phy_cap_info))
 119 +                               hemode |= FIELD_PREP(HE_MODE_UL_MUMIMO,
 120 +                                                    HE_UL_MUMIMO_ENABLE);
 121 +
 122 +               if (FIELD_GET(HE_MODE_MU_TX_BFEE, hemode))
 123 +                       hemode |= FIELD_PREP(HE_MODE_SU_TX_BFEE, HE_SU_BFEE_ENABLE);
 124 +
 125 +               if (FIELD_GET(HE_MODE_MU_TX_BFER, hemode))
 126 +                       hemode |= FIELD_PREP(HE_MODE_SU_TX_BFER, HE_SU_BFER_ENABLE);
 127 +       }
 128 +
 129 +       ret = ath11k_wmi_vdev_set_param_cmd(ar, arvif->vdev_id, param, hemode);
 130 +       if (ret) {
 131 +               ath11k_warn(ar->ab, "failed to submit vdev param txbf 0x%x: %d\n",
 132 +                           hemode, ret);
 133 +               return false;
 134 +       }
 135 +
 136 +       return true;
 137 +}
 138 +
 139  static void ath11k_bss_assoc(struct ieee80211_hw *hw,
 140                              struct ieee80211_vif *vif,
 141                              struct ieee80211_bss_conf *bss_conf)
 142 @@ -2709,6 +2820,7 @@ static void ath11k_bss_assoc(struct ieee
 143         struct ieee80211_sta *ap_sta;
 144         struct ath11k_peer *peer;
 145         bool is_auth = false;
 146 +       struct ieee80211_sta_he_cap  he_cap;
 147         int ret;
 148
 149         lockdep_assert_held(&ar->conf_mutex);
 150 @@ -2726,6 +2838,9 @@ static void ath11k_bss_assoc(struct ieee
 151                 return;
 152         }
 153
 154 +       /* he_cap here is updated at assoc success for sta mode only */
 155 +       he_cap  = ap_sta->deflink.he_cap;
 156 +
 157         ath11k_peer_assoc_prepare(ar, vif, ap_sta, &peer_arg, false);
 158
 159         rcu_read_unlock();
 160 @@ -2753,6 +2868,12 @@ static void ath11k_bss_assoc(struct ieee
 161                 return;
 162         }
 163
 164 +       if (!ath11k_mac_vif_recalc_sta_he_txbf(ar, vif, &he_cap)) {
 165 +               ath11k_warn(ar->ab, "failed to recalc he txbf for vdev %i on bss %pM\n",
 166 +                           arvif->vdev_id, bss_conf->bssid);
 167 +               return;
 168 +       }
 169 +
 170         WARN_ON(arvif->is_up);
 171
 172         arvif->aid = vif->cfg.aid;
 173 @@ -3202,6 +3323,8 @@ static void ath11k_mac_op_bss_info_chang
 174                 ether_addr_copy(arvif->bssid, info->bssid);
 175
 176         if (changed & BSS_CHANGED_BEACON_ENABLED) {
 177 +               if (info->enable_beacon)
 178 +                       ath11k_mac_set_he_txbf_conf(arvif);
 179                 ath11k_control_beaconing(arvif, info);
 180
 181                 if (arvif->is_up && vif->bss_conf.he_support &&
 182 @@ -5392,6 +5515,10 @@ static int ath11k_mac_copy_he_cap(struct
 183
 184                 he_cap_elem->mac_cap_info[1] &=
 185                         IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_MASK;
 186 +               he_cap_elem->phy_cap_info[0] &=
 187 +                       ~IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G;
 188 +               he_cap_elem->phy_cap_info[0] &=
 189 +                       ~IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G;
 190
 191                 he_cap_elem->phy_cap_info[5] &=
 192                         ~IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_MASK;
 193 @@ -6026,69 +6153,6 @@ ath11k_mac_setup_vdev_create_params(stru
 194         }
 195  }
 196
 197 -static u32
 198 -ath11k_mac_prepare_he_mode(struct ath11k_pdev *pdev, u32 viftype)
 199 -{
 200 -       struct ath11k_pdev_cap *pdev_cap = &pdev->cap;
 201 -       struct ath11k_band_cap *cap_band = NULL;
 202 -       u32 *hecap_phy_ptr = NULL;
 203 -       u32 hemode = 0;
 204 -
 205 -       if (pdev->cap.supported_bands & WMI_HOST_WLAN_2G_CAP)
 206 -               cap_band = &pdev_cap->band[NL80211_BAND_2GHZ];
 207 -       else
 208 -               cap_band = &pdev_cap->band[NL80211_BAND_5GHZ];
 209 -
 210 -       hecap_phy_ptr = &cap_band->he_cap_phy_info[0];
 211 -
 212 -       hemode = FIELD_PREP(HE_MODE_SU_TX_BFEE, HE_SU_BFEE_ENABLE) |
 213 -                FIELD_PREP(HE_MODE_SU_TX_BFER, HECAP_PHY_SUBFMR_GET(hecap_phy_ptr)) |
 214 -                FIELD_PREP(HE_MODE_UL_MUMIMO, HECAP_PHY_ULMUMIMO_GET(hecap_phy_ptr));
 215 -
 216 -       /* TODO WDS and other modes */
 217 -       if (viftype == NL80211_IFTYPE_AP) {
 218 -               hemode |= FIELD_PREP(HE_MODE_MU_TX_BFER,
 219 -                         HECAP_PHY_MUBFMR_GET(hecap_phy_ptr)) |
 220 -                         FIELD_PREP(HE_MODE_DL_OFDMA, HE_DL_MUOFDMA_ENABLE) |
 221 -                         FIELD_PREP(HE_MODE_UL_OFDMA, HE_UL_MUOFDMA_ENABLE);
 222 -       } else {
 223 -               hemode |= FIELD_PREP(HE_MODE_MU_TX_BFEE, HE_MU_BFEE_ENABLE);
 224 -       }
 225 -
 226 -       return hemode;
 227 -}
 228 -
 229 -static int ath11k_set_he_mu_sounding_mode(struct ath11k *ar,
 230 -                                         struct ath11k_vif *arvif)
 231 -{
 232 -       u32 param_id, param_value;
 233 -       struct ath11k_base *ab = ar->ab;
 234 -       int ret = 0;
 235 -
 236 -       param_id = WMI_VDEV_PARAM_SET_HEMU_MODE;
 237 -       param_value = ath11k_mac_prepare_he_mode(ar->pdev, arvif->vif->type);
 238 -       ret = ath11k_wmi_vdev_set_param_cmd(ar, arvif->vdev_id,
 239 -                                           param_id, param_value);
 240 -       if (ret) {
 241 -               ath11k_warn(ab, "failed to set vdev %d HE MU mode: %d param_value %x\n",
 242 -                           arvif->vdev_id, ret, param_value);
 243 -               return ret;
 244 -       }
 245 -       param_id = WMI_VDEV_PARAM_SET_HE_SOUNDING_MODE;
 246 -       param_value =
 247 -               FIELD_PREP(HE_VHT_SOUNDING_MODE, HE_VHT_SOUNDING_MODE_ENABLE) |
 248 -               FIELD_PREP(HE_TRIG_NONTRIG_SOUNDING_MODE,
 249 -                          HE_TRIG_NONTRIG_SOUNDING_MODE_ENABLE);
 250 -       ret = ath11k_wmi_vdev_set_param_cmd(ar, arvif->vdev_id,
 251 -                                           param_id, param_value);
 252 -       if (ret) {
 253 -               ath11k_warn(ab, "failed to set vdev %d HE MU mode: %d\n",
 254 -                           arvif->vdev_id, ret);
 255 -               return ret;
 256 -       }
 257 -       return ret;
 258 -}
 259 -
 260  static void ath11k_mac_op_update_vif_offload(struct ieee80211_hw *hw,
 261                                              struct ieee80211_vif *vif)
 262  {
 263 @@ -6757,7 +6821,6 @@ ath11k_mac_vdev_start_restart(struct ath
 264         struct ath11k_base *ab = ar->ab;
 265         struct wmi_vdev_start_req_arg arg = {};
 266         const struct cfg80211_chan_def *chandef = &ctx->def;
 267 -       int he_support = arvif->vif->bss_conf.he_support;
 268         int ret = 0;
 269
 270         lockdep_assert_held(&ar->conf_mutex);
 271 @@ -6798,15 +6861,6 @@ ath11k_mac_vdev_start_restart(struct ath
 272                 spin_lock_bh(&ab->base_lock);
 273                 arg.regdomain = ar->ab->dfs_region;
 274                 spin_unlock_bh(&ab->base_lock);
 275 -
 276 -               if (he_support) {
 277 -                       ret = ath11k_set_he_mu_sounding_mode(ar, arvif);
 278 -                       if (ret) {
 279 -                               ath11k_warn(ar->ab, "failed to set he mode vdev %i\n",
 280 -                                           arg.vdev_id);
 281 -                               return ret;
 282 -                       }
 283 -               }
 284         }
 285
 286         arg.channel.passive |= !!(chandef->chan->flags & IEEE80211_CHAN_NO_IR);
 287 --- a/drivers/net/wireless/ath/ath11k/wmi.h
 288 +++ b/drivers/net/wireless/ath/ath11k/wmi.h
 289 @@ -2897,8 +2897,11 @@ struct rx_reorder_queue_remove_params {
 290  #define HE_DL_MUOFDMA_ENABLE   1
 291  #define HE_UL_MUOFDMA_ENABLE   1
 292  #define HE_DL_MUMIMO_ENABLE    1
 293 +#define HE_UL_MUMIMO_ENABLE    1
 294  #define HE_MU_BFEE_ENABLE      1
 295  #define HE_SU_BFEE_ENABLE      1
 296 +#define HE_MU_BFER_ENABLE      1
 297 +#define HE_SU_BFER_ENABLE      1
 298
 299  #define HE_VHT_SOUNDING_MODE_ENABLE            1
 300  #define HE_SU_MU_SOUNDING_MODE_ENABLE          1