package/network/config/ltq-vdsl-app/files/dsl_control

   1 #!/bin/sh /etc/rc.common
   2 # Copyright (C) 2012 OpenWrt.org
   3
   4 # needs to start before the atm layer which starts at 50
   5 START=48
   6 USE_PROCD=1
   7
   8 EXTRA_COMMANDS="status lucistat"
   9 EXTRA_HELP="    status  Get DSL status information
  10         lucistat  Get status information if lua friendly format"
  11
  12 [ -f /lib/functions/lantiq_dsl.sh ] && . /lib/functions/lantiq_dsl.sh
  13
  14 # G.992.1 Annex A
  15 # G.992.3 Annex A / L-US1 / L_US-2 / M
  16 # G.992.5 Annex A / M
  17 xtse_adsl_a="04_00_04_00_4C_01_04_00"
  18
  19 # G.992.1 Annex B
  20 # G.992.3 Annex B
  21 # G.992.5 Annex B
  22 # G.993.2 Annex A/B/C
  23 xtse_adsl_b="10_00_10_00_00_04_00_00"
  24
  25 # G.992.1 Annex B
  26 # G.992.3 Annex B
  27 # G.992.3 Annex J
  28 # G.992.5 Annex B
  29 # G.992.5 Annex J
  30 # G.993.2 Annex A/B/C
  31 xtse_adsl_j="10_00_10_40_00_04_01_00"
  32
  33 xtse_vdsl="00_00_00_00_00_00_00_07"
  34
  35 service_triggers() {
  36         procd_add_reload_trigger network
  37 }
  38
  39 start_service() {
  40         local annex
  41         local firmware
  42         local xtse
  43         local xtse_adsl
  44         local mode
  45
  46         config_load network
  47         config_get annex dsl annex
  48         config_get firmware dsl firmware
  49         config_get xfer_mode dsl xfer_mode
  50
  51         [ -z "${xfer_mode}" ] && xfer_mode=ptm
  52
  53         case "${xfer_mode}" in
  54         atm)
  55                 LOAD=ltq_atm_vr9
  56                 UNLOAD=ltq_ptm_vr9
  57                 mode=1
  58                 ;;
  59         *)
  60                 LOAD=ltq_ptm_vr9
  61                 UNLOAD=ltq_atm_vr9
  62                 mode=2
  63                 ;;
  64         esac
  65
  66         eval "xtse_adsl=\"\${xtse_adsl_$annex}\""
  67         if [ "${xtse_adsl}" ]; then
  68                 xtse=$xtse_adsl
  69         else
  70                 xtse=$xtse_vdsl
  71         fi
  72
  73         [ -z "${firmware}" ] && firmware=/lib/firmware/vdsl.bin
  74         [ -f "${firmware}" ] || {
  75                 echo failed to find $firmware
  76                 return 1
  77         }
  78
  79         procd_open_instance
  80         procd_set_param command /sbin/vdsl_cpe_control_wrapper \
  81                         -i$xtse \
  82                         -n /sbin/dsl_notify.sh \
  83                         -f ${firmware} \
  84                         -M ${mode}
  85         procd_append_param env "LOAD=$LOAD" "UNLOAD=$UNLOAD"
  86         procd_close_instance
  87 }
  88
  89 stop_service() {
  90         DSL_NOTIFICATION_TYPE="DSL_INTERFACE_STATUS" \
  91         DSL_INTERFACE_STATUS="DOWN" \
  92                 /sbin/dsl_notify.sh
  93 }