package/network/services/hostapd/files/hostapd.sh

   1 . /lib/functions/network.sh
   2 . /lib/functions.sh
   3
   4 wpa_supplicant_add_rate() {
   5         local var="$1"
   6         local val="$(($2 / 1000))"
   7         local sub="$((($2 / 100) % 10))"
   8         append $var "$val" ","
   9         [ $sub -gt 0 ] && append $var "."
  10 }
  11
  12 hostapd_add_rate() {
  13         local var="$1"
  14         local val="$(($2 / 100))"
  15         append $var "$val" " "
  16 }
  17
  18 hostapd_append_wep_key() {
  19         local var="$1"
  20
  21         wep_keyidx=0
  22         set_default key 1
  23         case "$key" in
  24                 [1234])
  25                         for idx in 1 2 3 4; do
  26                                 local zidx
  27                                 zidx=$(($idx - 1))
  28                                 json_get_var ckey "key${idx}"
  29                                 [ -n "$ckey" ] && \
  30                                         append $var "wep_key${zidx}=$(prepare_key_wep "$ckey")" "$N$T"
  31                         done
  32                         wep_keyidx=$((key - 1))
  33                 ;;
  34                 *)
  35                         append $var "wep_key0=$(prepare_key_wep "$key")" "$N$T"
  36                 ;;
  37         esac
  38 }
  39
  40 hostapd_append_wpa_key_mgmt() {
  41         local auth_type_l="$(echo $auth_type | tr 'a-z' 'A-Z')"
  42
  43         case "$auth_type" in
  44                 psk|eap)
  45                         append wpa_key_mgmt "WPA-$auth_type_l"
  46                         [ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-${auth_type_l}"
  47                         [ "${ieee80211w:-0}" -gt 0 ] && append wpa_key_mgmt "WPA-${auth_type_l}-SHA256"
  48                 ;;
  49                 eap192)
  50                         append wpa_key_mgmt "WPA-EAP-SUITE-B-192"
  51                         [ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-EAP"
  52                 ;;
  53                 eap-eap192)
  54                         append wpa_key_mgmt "WPA-EAP-SUITE-B-192"
  55                         append wpa_key_mgmt "WPA-EAP"
  56                         [ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-EAP"
  57                         [ "${ieee80211w:-0}" -gt 0 ] && append wpa_key_mgmt "WPA-EAP-SHA256"
  58                 ;;
  59                 sae)
  60                         append wpa_key_mgmt "SAE"
  61                         [ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-SAE"
  62                 ;;
  63                 psk-sae)
  64                         append wpa_key_mgmt "WPA-PSK"
  65                         [ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-PSK"
  66                         [ "${ieee80211w:-0}" -gt 0 ] && append wpa_key_mgmt "WPA-PSK-SHA256"
  67                         append wpa_key_mgmt "SAE"
  68                         [ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-SAE"
  69                 ;;
  70                 owe)
  71                         append wpa_key_mgmt "OWE"
  72                 ;;
  73         esac
  74
  75         [ "$auth_osen" = "1" ] && append wpa_key_mgmt "OSEN"
  76 }
  77
  78 hostapd_add_log_config() {
  79         config_add_boolean \
  80                 log_80211 \
  81                 log_8021x \
  82                 log_radius \
  83                 log_wpa \
  84                 log_driver \
  85                 log_iapp \
  86                 log_mlme
  87
  88         config_add_int log_level
  89 }
  90
  91 hostapd_common_add_device_config() {
  92         config_add_array basic_rate
  93         config_add_array supported_rates
  94
  95         config_add_string country
  96         config_add_boolean country_ie doth
  97         config_add_boolean spectrum_mgmt_required
  98         config_add_int local_pwr_constraint
  99         config_add_string require_mode
 100         config_add_boolean legacy_rates
 101
 102         config_add_string acs_chan_bias
 103         config_add_array hostapd_options
 104
 105         hostapd_add_log_config
 106 }
 107
 108 hostapd_prepare_device_config() {
 109         local config="$1"
 110         local driver="$2"
 111
 112         local base="${config%%.conf}"
 113         local base_cfg=
 114
 115         json_get_vars country country_ie beacon_int:100 dtim_period:2 doth require_mode legacy_rates \
 116                 acs_chan_bias local_pwr_constraint spectrum_mgmt_required airtime_mode
 117
 118         hostapd_set_log_options base_cfg
 119
 120         set_default country_ie 1
 121         set_default spectrum_mgmt_required 0
 122         set_default doth 1
 123         set_default legacy_rates 1
 124         set_default airtime_mode 0
 125
 126         [ "$hwmode" = "b" ] && legacy_rates=1
 127
 128         [ -n "$country" ] && {
 129                 append base_cfg "country_code=$country" "$N"
 130
 131                 [ "$country_ie" -gt 0 ] && {
 132                         append base_cfg "ieee80211d=1" "$N"
 133                         [ -n "$local_pwr_constraint" ] && append base_cfg "local_pwr_constraint=$local_pwr_constraint" "$N"
 134                         [ "$spectrum_mgmt_required" -gt 0 ] && append base_cfg "spectrum_mgmt_required=$spectrum_mgmt_required" "$N"
 135                 }
 136                 [ "$hwmode" = "a" -a "$doth" -gt 0 ] && append base_cfg "ieee80211h=1" "$N"
 137         }
 138
 139         [ -n "$acs_chan_bias" ] && append base_cfg "acs_chan_bias=$acs_chan_bias" "$N"
 140
 141         local brlist= br
 142         json_get_values basic_rate_list basic_rate
 143         local rlist= r
 144         json_get_values rate_list supported_rates
 145
 146         [ -n "$hwmode" ] && append base_cfg "hw_mode=$hwmode" "$N"
 147         [ "$legacy_rates" -eq 0 ] && set_default require_mode g
 148
 149         [ "$hwmode" = "g" ] && {
 150                 [ "$legacy_rates" -eq 0 ] && set_default rate_list "6000 9000 12000 18000 24000 36000 48000 54000"
 151                 [ -n "$require_mode" ] && set_default basic_rate_list "6000 12000 24000"
 152         }
 153
 154         case "$require_mode" in
 155                 n) append base_cfg "require_ht=1" "$N";;
 156                 ac) append base_cfg "require_vht=1" "$N";;
 157         esac
 158
 159         for r in $rate_list; do
 160                 hostapd_add_rate rlist "$r"
 161         done
 162
 163         for br in $basic_rate_list; do
 164                 hostapd_add_rate brlist "$br"
 165         done
 166
 167         [ -n "$rlist" ] && append base_cfg "supported_rates=$rlist" "$N"
 168         [ -n "$brlist" ] && append base_cfg "basic_rates=$brlist" "$N"
 169         append base_cfg "beacon_int=$beacon_int" "$N"
 170         append base_cfg "dtim_period=$dtim_period" "$N"
 171         [ "$airtime_mode" -gt 0 ] && append base_cfg "airtime_mode=$airtime_mode" "$N"
 172
 173         json_get_values opts hostapd_options
 174         for val in $opts; do
 175                 append base_cfg "$val" "$N"
 176         done
 177
 178         cat > "$config" <<EOF
 179 driver=$driver
 180 $base_cfg
 181 EOF
 182 }
 183
 184 hostapd_common_add_bss_config() {
 185         config_add_string 'bssid:macaddr' 'ssid:string'
 186         config_add_boolean wds wmm uapsd hidden utf8_ssid
 187
 188         config_add_int maxassoc max_inactivity
 189         config_add_boolean disassoc_low_ack isolate short_preamble
 190
 191         config_add_int \
 192                 wep_rekey eap_reauth_period \
 193                 wpa_group_rekey wpa_pair_rekey wpa_master_rekey
 194         config_add_boolean wpa_strict_rekey
 195         config_add_boolean wpa_disable_eapol_key_retries
 196
 197         config_add_boolean tdls_prohibit
 198
 199         config_add_boolean rsn_preauth auth_cache
 200         config_add_int ieee80211w
 201         config_add_int eapol_version
 202
 203         config_add_string 'auth_server:host' 'server:host'
 204         config_add_string auth_secret key
 205         config_add_int 'auth_port:port' 'port:port'
 206
 207         config_add_string acct_server
 208         config_add_string acct_secret
 209         config_add_int acct_port
 210         config_add_int acct_interval
 211
 212         config_add_string dae_client
 213         config_add_string dae_secret
 214         config_add_int dae_port
 215
 216         config_add_string nasid
 217         config_add_string ownip
 218         config_add_string radius_client_addr
 219         config_add_string iapp_interface
 220         config_add_string eap_type ca_cert client_cert identity anonymous_identity auth priv_key priv_key_pwd
 221         config_add_boolean ca_cert_usesystem ca_cert2_usesystem
 222         config_add_string subject_match subject_match2
 223         config_add_array altsubject_match altsubject_match2
 224         config_add_array domain_match domain_match2 domain_suffix_match domain_suffix_match2
 225         config_add_string ieee80211w_mgmt_cipher
 226
 227         config_add_int dynamic_vlan vlan_naming
 228         config_add_string vlan_tagged_interface vlan_bridge
 229         config_add_string vlan_file
 230
 231         config_add_string 'key1:wepkey' 'key2:wepkey' 'key3:wepkey' 'key4:wepkey' 'password:wpakey'
 232
 233         config_add_string wpa_psk_file
 234
 235         config_add_int multi_ap
 236
 237         config_add_boolean wps_pushbutton wps_label ext_registrar wps_pbc_in_m1
 238         config_add_int wps_ap_setup_locked wps_independent
 239         config_add_string wps_device_type wps_device_name wps_manufacturer wps_pin
 240         config_add_string multi_ap_backhaul_ssid multi_ap_backhaul_key
 241
 242         config_add_boolean ieee80211v wnm_sleep_mode bss_transition
 243         config_add_int time_advertisement
 244         config_add_string time_zone
 245
 246         config_add_boolean ieee80211k rrm_neighbor_report rrm_beacon_report
 247
 248         config_add_boolean ieee80211r pmk_r1_push ft_psk_generate_local ft_over_ds
 249         config_add_int r0_key_lifetime reassociation_deadline
 250         config_add_string mobility_domain r1_key_holder
 251         config_add_array r0kh r1kh
 252
 253         config_add_int ieee80211w_max_timeout ieee80211w_retry_timeout
 254
 255         config_add_string macfilter 'macfile:file'
 256         config_add_array 'maclist:list(macaddr)'
 257
 258         config_add_array bssid_blacklist
 259         config_add_array bssid_whitelist
 260
 261         config_add_int mcast_rate
 262         config_add_array basic_rate
 263         config_add_array supported_rates
 264
 265         config_add_boolean sae_require_mfp
 266
 267         config_add_string 'owe_transition_bssid:macaddr' 'owe_transition_ssid:string'
 268
 269         config_add_boolean hs20 disable_dgaf osen
 270         config_add_int anqp_domain_id
 271         config_add_int hs20_deauth_req_timeout
 272         config_add_array hs20_oper_friendly_name
 273         config_add_array osu_provider
 274         config_add_array operator_icon
 275         config_add_array hs20_conn_capab
 276         config_add_string osu_ssid hs20_wan_metrics hs20_operating_class hs20_t_c_filename hs20_t_c_timestamp
 277
 278         config_add_int airtime_bss_weight airtime_bss_limit
 279 }
 280
 281 hostapd_set_vlan_file() {
 282         local ifname="$1"
 283         local vlan="$2"
 284         json_get_vars name vid
 285         echo "${vid} ${ifname}-${name}" >> /var/run/hostapd-${ifname}.vlan
 286         wireless_add_vlan "${vlan}" "${ifname}-${name}"
 287 }
 288
 289 hostapd_set_vlan() {
 290         local ifname="$1"
 291
 292         rm -f /var/run/hostapd-${ifname}.vlan
 293         for_each_vlan hostapd_set_vlan_file ${ifname}
 294 }
 295
 296 hostapd_set_psk_file() {
 297         local ifname="$1"
 298         local vlan="$2"
 299         local vlan_id=""
 300
 301         json_get_vars mac vid key
 302         set_default mac "00:00:00:00:00:00"
 303         [ -n "$vid" ] && vlan_id="vlanid=$vid "
 304         echo "${vlan_id} ${mac} ${key}" >> /var/run/hostapd-${ifname}.psk
 305 }
 306
 307 hostapd_set_psk() {
 308         local ifname="$1"
 309
 310         rm -f /var/run/hostapd-${ifname}.psk
 311         for_each_station hostapd_set_psk_file ${ifname}
 312 }
 313
 314 append_hs20_oper_friendly_name() {
 315         append bss_conf "hs20_oper_friendly_name=$1" "$N"
 316 }
 317
 318 append_osu_provider_service_desc() {
 319         append bss_conf "osu_service_desc=$1" "$N"
 320 }
 321
 322 append_hs20_icon() {
 323         local width height lang type path
 324         config_get width "$1" width
 325         config_get height "$1" height
 326         config_get lang "$1" lang
 327         config_get type "$1" type
 328         config_get path "$1" path
 329
 330         append bss_conf "hs20_icon=$width:$height:$lang:$type:$1:$path" "$N"
 331 }
 332
 333 append_hs20_icons() {
 334         config_load wireless
 335         config_foreach append_hs20_icon hs20-icon
 336 }
 337
 338 append_operator_icon() {
 339         append bss_conf "operator_icon=$1" "$N"
 340 }
 341
 342 append_osu_icon() {
 343         append bss_conf "osu_icon=$1" "$N"
 344 }
 345
 346 append_osu_provider() {
 347         local cfgtype osu_server_uri osu_friendly_name osu_nai osu_nai2 osu_method_list
 348
 349         config_load wireless
 350         config_get cfgtype "$1" TYPE
 351         [ "$cfgtype" != "osu-provider" ] && return
 352
 353         append bss_conf "# provider $1" "$N"
 354         config_get osu_server_uri "$1" osu_server_uri
 355         config_get osu_nai "$1" osu_nai
 356         config_get osu_nai2 "$1" osu_nai2
 357         config_get osu_method_list "$1" osu_method
 358
 359         append bss_conf "osu_server_uri=$osu_server_uri" "$N"
 360         append bss_conf "osu_nai=$osu_nai" "$N"
 361         append bss_conf "osu_nai2=$osu_nai2" "$N"
 362         append bss_conf "osu_method_list=$osu_method_list" "$N"
 363
 364         config_list_foreach "$1" osu_service_desc append_osu_provider_service_desc
 365         config_list_foreach "$1" osu_icon append_osu_icon
 366
 367         append bss_conf "$N"
 368 }
 369
 370 append_hs20_conn_capab() {
 371         [ -n "$1" ] && append bss_conf "hs20_conn_capab=$1" "$N"
 372 }
 373
 374 hostapd_set_bss_options() {
 375         local var="$1"
 376         local phy="$2"
 377         local vif="$3"
 378
 379         wireless_vif_parse_encryption
 380
 381         local bss_conf bss_md5sum
 382         local wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey wpa_key_mgmt
 383
 384         json_get_vars \
 385                 wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey wpa_strict_rekey \
 386                 wpa_disable_eapol_key_retries tdls_prohibit \
 387                 maxassoc max_inactivity disassoc_low_ack isolate auth_cache \
 388                 wps_pushbutton wps_label ext_registrar wps_pbc_in_m1 wps_ap_setup_locked \
 389                 wps_independent wps_device_type wps_device_name wps_manufacturer wps_pin \
 390                 macfilter ssid utf8_ssid wmm uapsd hidden short_preamble rsn_preauth \
 391                 iapp_interface eapol_version dynamic_vlan ieee80211w nasid \
 392                 acct_server acct_secret acct_port acct_interval \
 393                 bss_load_update_period chan_util_avg_period sae_require_mfp \
 394                 multi_ap multi_ap_backhaul_ssid multi_ap_backhaul_key \
 395                 airtime_bss_weight airtime_bss_limit
 396
 397         set_default isolate 0
 398         set_default maxassoc 0
 399         set_default max_inactivity 0
 400         set_default short_preamble 1
 401         set_default disassoc_low_ack 1
 402         set_default hidden 0
 403         set_default wmm 1
 404         set_default uapsd 1
 405         set_default wpa_disable_eapol_key_retries 0
 406         set_default tdls_prohibit 0
 407         set_default eapol_version 0
 408         set_default acct_port 1813
 409         set_default bss_load_update_period 60
 410         set_default chan_util_avg_period 600
 411         set_default utf8_ssid 1
 412         set_default multi_ap 0
 413         set_default airtime_bss_weight 0
 414         set_default airtime_bss_limit 0
 415
 416         append bss_conf "ctrl_interface=/var/run/hostapd"
 417         if [ "$isolate" -gt 0 ]; then
 418                 append bss_conf "ap_isolate=$isolate" "$N"
 419         fi
 420         if [ "$maxassoc" -gt 0 ]; then
 421                 append bss_conf "max_num_sta=$maxassoc" "$N"
 422         fi
 423         if [ "$max_inactivity" -gt 0 ]; then
 424                 append bss_conf "ap_max_inactivity=$max_inactivity" "$N"
 425         fi
 426
 427         [ "$airtime_bss_weight" -gt 0 ] && append bss_conf "airtime_bss_weight=$airtime_bss_weight" "$N"
 428         [ "$airtime_bss_limit" -gt 0 ] && append bss_conf "airtime_bss_limit=$airtime_bss_limit" "$N"
 429
 430         append bss_conf "bss_load_update_period=$bss_load_update_period" "$N"
 431         append bss_conf "chan_util_avg_period=$chan_util_avg_period" "$N"
 432         append bss_conf "disassoc_low_ack=$disassoc_low_ack" "$N"
 433         append bss_conf "preamble=$short_preamble" "$N"
 434         append bss_conf "wmm_enabled=$wmm" "$N"
 435         append bss_conf "ignore_broadcast_ssid=$hidden" "$N"
 436         append bss_conf "uapsd_advertisement_enabled=$uapsd" "$N"
 437         append bss_conf "utf8_ssid=$utf8_ssid" "$N"
 438         append bss_conf "multi_ap=$multi_ap" "$N"
 439
 440         [ "$tdls_prohibit" -gt 0 ] && append bss_conf "tdls_prohibit=$tdls_prohibit" "$N"
 441
 442         [ "$wpa" -gt 0 ] && {
 443                 [ -n "$wpa_group_rekey"  ] && append bss_conf "wpa_group_rekey=$wpa_group_rekey" "$N"
 444                 [ -n "$wpa_pair_rekey"   ] && append bss_conf "wpa_ptk_rekey=$wpa_pair_rekey"    "$N"
 445                 [ -n "$wpa_master_rekey" ] && append bss_conf "wpa_gmk_rekey=$wpa_master_rekey"  "$N"
 446                 [ -n "$wpa_strict_rekey" ] && append bss_conf "wpa_strict_rekey=$wpa_strict_rekey" "$N"
 447         }
 448
 449         [ -n "$nasid" ] && append bss_conf "nas_identifier=$nasid" "$N"
 450         [ -n "$acct_server" ] && {
 451                 append bss_conf "acct_server_addr=$acct_server" "$N"
 452                 append bss_conf "acct_server_port=$acct_port" "$N"
 453                 [ -n "$acct_secret" ] && \
 454                         append bss_conf "acct_server_shared_secret=$acct_secret" "$N"
 455                 [ -n "$acct_interval" ] && \
 456                         append bss_conf "radius_acct_interim_interval=$acct_interval" "$N"
 457         }
 458
 459         case "$auth_type" in
 460                 sae|owe|eap192|eap-eap192)
 461                         set_default ieee80211w 2
 462                         set_default sae_require_mfp 1
 463                 ;;
 464                 psk-sae)
 465                         set_default ieee80211w 1
 466                         set_default sae_require_mfp 1
 467                 ;;
 468         esac
 469         [ -n "$sae_require_mfp" ] && append bss_conf "sae_require_mfp=$sae_require_mfp" "$N"
 470
 471         local vlan_possible=""
 472
 473         case "$auth_type" in
 474                 none|owe)
 475                         json_get_vars owe_transition_bssid owe_transition_ssid
 476
 477                         [ -n "$owe_transition_ssid" ] && append bss_conf "owe_transition_ssid=\"$owe_transition_ssid\"" "$N"
 478                         [ -n "$owe_transition_bssid" ] && append bss_conf "owe_transition_bssid=$owe_transition_bssid" "$N"
 479
 480                         wps_possible=1
 481                         # Here we make the assumption that if we're in open mode
 482                         # with WPS enabled, we got to be in unconfigured state.
 483                         wps_not_configured=1
 484                 ;;
 485                 psk|sae|psk-sae)
 486                         json_get_vars key wpa_psk_file
 487                         if [ ${#key} -eq 64 ]; then
 488                                 append bss_conf "wpa_psk=$key" "$N"
 489                         elif [ ${#key} -ge 8 ] && [ ${#key} -le 63 ]; then
 490                                 append bss_conf "wpa_passphrase=$key" "$N"
 491                         elif [ -n "$key" ] || [ -z "$wpa_psk_file" ]; then
 492                                 wireless_setup_vif_failed INVALID_WPA_PSK
 493                                 return 1
 494                         fi
 495                         [ -z "$wpa_psk_file" ] && set_default wpa_psk_file /var/run/hostapd-$ifname.psk
 496                         [ -n "$wpa_psk_file" ] && {
 497                                 [ -e "$wpa_psk_file" ] || touch "$wpa_psk_file"
 498                                 append bss_conf "wpa_psk_file=$wpa_psk_file" "$N"
 499                         }
 500                         [ "$eapol_version" -ge "1" -a "$eapol_version" -le "2" ] && append bss_conf "eapol_version=$eapol_version" "$N"
 501
 502                         set_default dynamic_vlan 0
 503                         vlan_possible=1
 504                         wps_possible=1
 505                 ;;
 506                 eap|eap192|eap-eap192)
 507                         json_get_vars \
 508                                 auth_server auth_secret auth_port \
 509                                 dae_client dae_secret dae_port \
 510                                 ownip radius_client_addr \
 511                                 eap_reauth_period
 512
 513                         # radius can provide VLAN ID for clients
 514                         vlan_possible=1
 515
 516                         # legacy compatibility
 517                         [ -n "$auth_server" ] || json_get_var auth_server server
 518                         [ -n "$auth_port" ] || json_get_var auth_port port
 519                         [ -n "$auth_secret" ] || json_get_var auth_secret key
 520
 521                         set_default auth_port 1812
 522                         set_default dae_port 3799
 523
 524
 525                         append bss_conf "auth_server_addr=$auth_server" "$N"
 526                         append bss_conf "auth_server_port=$auth_port" "$N"
 527                         append bss_conf "auth_server_shared_secret=$auth_secret" "$N"
 528
 529                         [ -n "$eap_reauth_period" ] && append bss_conf "eap_reauth_period=$eap_reauth_period" "$N"
 530
 531                         [ -n "$dae_client" -a -n "$dae_secret" ] && {
 532                                 append bss_conf "radius_das_port=$dae_port" "$N"
 533                                 append bss_conf "radius_das_client=$dae_client $dae_secret" "$N"
 534                         }
 535
 536                         [ -n "$ownip" ] && append bss_conf "own_ip_addr=$ownip" "$N"
 537                         [ -n "$radius_client_addr" ] && append bss_conf "radius_client_addr=$radius_client_addr" "$N"
 538                         append bss_conf "eapol_key_index_workaround=1" "$N"
 539                         append bss_conf "ieee8021x=1" "$N"
 540
 541                         [ "$eapol_version" -ge "1" -a "$eapol_version" -le "2" ] && append bss_conf "eapol_version=$eapol_version" "$N"
 542                 ;;
 543                 wep)
 544                         local wep_keyidx=0
 545                         json_get_vars key
 546                         hostapd_append_wep_key bss_conf
 547                         append bss_conf "wep_default_key=$wep_keyidx" "$N"
 548                         [ -n "$wep_rekey" ] && append bss_conf "wep_rekey_period=$wep_rekey" "$N"
 549                 ;;
 550         esac
 551
 552         local auth_algs=$((($auth_mode_shared << 1) | $auth_mode_open))
 553         append bss_conf "auth_algs=${auth_algs:-1}" "$N"
 554         append bss_conf "wpa=$wpa" "$N"
 555         [ -n "$wpa_pairwise" ] && append bss_conf "wpa_pairwise=$wpa_pairwise" "$N"
 556
 557         set_default wps_pushbutton 0
 558         set_default wps_label 0
 559         set_default wps_pbc_in_m1 0
 560
 561         config_methods=
 562         [ "$wps_pushbutton" -gt 0 ] && append config_methods push_button
 563         [ "$wps_label" -gt 0 ] && append config_methods label
 564
 565         # WPS not possible on Multi-AP backhaul-only SSID
 566         [ "$multi_ap" = 1 ] && wps_possible=
 567
 568         [ -n "$wps_possible" -a -n "$config_methods" ] && {
 569                 set_default ext_registrar 0
 570                 set_default wps_device_type "6-0050F204-1"
 571                 set_default wps_device_name "OpenWrt AP"
 572                 set_default wps_manufacturer "www.openwrt.org"
 573                 set_default wps_independent 1
 574
 575                 wps_state=2
 576                 [ -n "$wps_configured" ] && wps_state=1
 577
 578                 [ "$ext_registrar" -gt 0 -a -n "$network_bridge" ] && append bss_conf "upnp_iface=$network_bridge" "$N"
 579
 580                 append bss_conf "eap_server=1" "$N"
 581                 [ -n "$wps_pin" ] && append bss_conf "ap_pin=$wps_pin" "$N"
 582                 append bss_conf "wps_state=$wps_state" "$N"
 583                 append bss_conf "device_type=$wps_device_type" "$N"
 584                 append bss_conf "device_name=$wps_device_name" "$N"
 585                 append bss_conf "manufacturer=$wps_manufacturer" "$N"
 586                 append bss_conf "config_methods=$config_methods" "$N"
 587                 append bss_conf "wps_independent=$wps_independent" "$N"
 588                 [ -n "$wps_ap_setup_locked" ] && append bss_conf "ap_setup_locked=$wps_ap_setup_locked" "$N"
 589                 [ "$wps_pbc_in_m1" -gt 0 ] && append bss_conf "pbc_in_m1=$wps_pbc_in_m1" "$N"
 590                 [ "$multi_ap" -gt 0 ] && [ -n "$multi_ap_backhaul_ssid" ] && {
 591                         append bss_conf "multi_ap_backhaul_ssid=\"$multi_ap_backhaul_ssid\"" "$N"
 592                         if [ -z "$multi_ap_backhaul_key" ]; then
 593                                 :
 594                         elif [ ${#multi_ap_backhaul_key} -lt 8 ]; then
 595                                 wireless_setup_vif_failed INVALID_WPA_PSK
 596                                 return 1
 597                         elif [ ${#multi_ap_backhaul_key} -eq 64 ]; then
 598                                 append bss_conf "multi_ap_backhaul_wpa_psk=$multi_ap_backhaul_key" "$N"
 599                         else
 600                                 append bss_conf "multi_ap_backhaul_wpa_passphrase=$multi_ap_backhaul_key" "$N"
 601                         fi
 602                 }
 603         }
 604
 605         append bss_conf "ssid=$ssid" "$N"
 606         [ -n "$network_bridge" ] && append bss_conf "bridge=$network_bridge" "$N"
 607         [ -n "$iapp_interface" ] && {
 608                 local ifname
 609                 network_get_device ifname "$iapp_interface" || ifname="$iapp_interface"
 610                 append bss_conf "iapp_interface=$ifname" "$N"
 611         }
 612
 613         json_get_vars ieee80211v
 614         set_default ieee80211v 0
 615         if [ "$ieee80211v" -eq "1" ]; then
 616                 json_get_vars time_advertisement time_zone wnm_sleep_mode bss_transition
 617
 618                 set_default time_advertisement 0
 619                 set_default wnm_sleep_mode 0
 620                 set_default bss_transition 0
 621
 622                 append bss_conf "time_advertisement=$time_advertisement" "$N"
 623                 [ -n "$time_zone" ] && append bss_conf "time_zone=$time_zone" "$N"
 624                 append bss_conf "wnm_sleep_mode=$wnm_sleep_mode" "$N"
 625                 append bss_conf "bss_transition=$bss_transition" "$N"
 626         fi
 627
 628         json_get_vars ieee80211k rrm_neighbor_report rrm_beacon_report
 629         set_default ieee80211k 0
 630         if [ "$ieee80211k" -eq "1" ]; then
 631                 set_default rrm_neighbor_report 1
 632                 set_default rrm_beacon_report 1
 633         fi
 634
 635         [ "$rrm_neighbor_report" -eq "1" ] && append bss_conf "rrm_neighbor_report=1" "$N"
 636         [ "$rrm_beacon_report" -eq "1" ] && append bss_conf "rrm_beacon_report=1" "$N"
 637
 638         if [ "$wpa" -ge "1" ]; then
 639                 json_get_vars ieee80211r
 640                 set_default ieee80211r 0
 641
 642                 if [ "$ieee80211r" -gt "0" ]; then
 643                         json_get_vars mobility_domain ft_psk_generate_local ft_over_ds reassociation_deadline
 644
 645                         set_default mobility_domain "$(echo "$ssid" | md5sum | head -c 4)"
 646                         set_default ft_over_ds 1
 647                         set_default reassociation_deadline 1000
 648
 649                         case "$auth_type" in
 650                                 psk|sae|psk-sae)
 651                                         set_default ft_psk_generate_local 1
 652                                 ;;
 653                                 *)
 654                                         set_default ft_psk_generate_local 0
 655                                 ;;
 656                         esac
 657
 658                         append bss_conf "mobility_domain=$mobility_domain" "$N"
 659                         append bss_conf "ft_psk_generate_local=$ft_psk_generate_local" "$N"
 660                         append bss_conf "ft_over_ds=$ft_over_ds" "$N"
 661                         append bss_conf "reassociation_deadline=$reassociation_deadline" "$N"
 662                         [ -n "$nasid" ] || append bss_conf "nas_identifier=${macaddr//\:}" "$N"
 663
 664                         if [ "$ft_psk_generate_local" -eq "0" ]; then
 665                                 json_get_vars r0_key_lifetime r1_key_holder pmk_r1_push
 666                                 json_get_values r0kh r0kh
 667                                 json_get_values r1kh r1kh
 668
 669                                 set_default r0_key_lifetime 10000
 670                                 set_default pmk_r1_push 0
 671
 672                                 [ -n "$r1_key_holder" ] && append bss_conf "r1_key_holder=$r1_key_holder" "$N"
 673                                 append bss_conf "r0_key_lifetime=$r0_key_lifetime" "$N"
 674                                 append bss_conf "pmk_r1_push=$pmk_r1_push" "$N"
 675
 676                                 for kh in $r0kh; do
 677                                         append bss_conf "r0kh=${kh//,/ }" "$N"
 678                                 done
 679                                 for kh in $r1kh; do
 680                                         append bss_conf "r1kh=${kh//,/ }" "$N"
 681                                 done
 682                         fi
 683                 fi
 684
 685                 append bss_conf "wpa_disable_eapol_key_retries=$wpa_disable_eapol_key_retries" "$N"
 686
 687                 hostapd_append_wpa_key_mgmt
 688                 [ -n "$wpa_key_mgmt" ] && append bss_conf "wpa_key_mgmt=$wpa_key_mgmt" "$N"
 689         fi
 690
 691         if [ "$wpa" -ge "2" ]; then
 692                 if [ -n "$network_bridge" -a "$rsn_preauth" = 1 ]; then
 693                         set_default auth_cache 1
 694                         append bss_conf "rsn_preauth=1" "$N"
 695                         append bss_conf "rsn_preauth_interfaces=$network_bridge" "$N"
 696                 else
 697                         case "$auth_type" in
 698                         sae|psk-sae|owe)
 699                                 set_default auth_cache 1
 700                         ;;
 701                         *)
 702                                 set_default auth_cache 0
 703                         ;;
 704                         esac
 705                 fi
 706
 707                 append bss_conf "okc=$auth_cache" "$N"
 708                 [ "$auth_cache" = 0 ] && append bss_conf "disable_pmksa_caching=1" "$N"
 709
 710                 # RSN -> allow management frame protection
 711                 case "$ieee80211w" in
 712                         [012])
 713                                 json_get_vars ieee80211w_mgmt_cipher ieee80211w_max_timeout ieee80211w_retry_timeout
 714                                 append bss_conf "ieee80211w=$ieee80211w" "$N"
 715                                 [ "$ieee80211w" -gt "0" ] && {
 716                                         append bss_conf "group_mgmt_cipher=${ieee80211w_mgmt_cipher:-AES-128-CMAC}" "$N"
 717                                         [ -n "$ieee80211w_max_timeout" ] && \
 718                                                 append bss_conf "assoc_sa_query_max_timeout=$ieee80211w_max_timeout" "$N"
 719                                         [ -n "$ieee80211w_retry_timeout" ] && \
 720                                                 append bss_conf "assoc_sa_query_retry_timeout=$ieee80211w_retry_timeout" "$N"
 721                                 }
 722                         ;;
 723                 esac
 724         fi
 725
 726         _macfile="/var/run/hostapd-$ifname.maclist"
 727         case "$macfilter" in
 728                 allow)
 729                         append bss_conf "macaddr_acl=1" "$N"
 730                         append bss_conf "accept_mac_file=$_macfile" "$N"
 731                         # accept_mac_file can be used to set MAC to VLAN ID mapping
 732                         vlan_possible=1
 733                 ;;
 734                 deny)
 735                         append bss_conf "macaddr_acl=0" "$N"
 736                         append bss_conf "deny_mac_file=$_macfile" "$N"
 737                 ;;
 738                 *)
 739                         _macfile=""
 740                 ;;
 741         esac
 742
 743         [ -n "$_macfile" ] && {
 744                 json_get_vars macfile
 745                 json_get_values maclist maclist
 746
 747                 rm -f "$_macfile"
 748                 (
 749                         for mac in $maclist; do
 750                                 echo "$mac"
 751                         done
 752                         [ -n "$macfile" -a -f "$macfile" ] && cat "$macfile"
 753                 ) > "$_macfile"
 754         }
 755
 756         [ -n "$vlan_possible" -a -n "$dynamic_vlan" ] && {
 757                 json_get_vars vlan_naming vlan_tagged_interface vlan_bridge vlan_file
 758                 set_default vlan_naming 1
 759                 [ -z "$vlan_file" ] && set_default vlan_file /var/run/hostapd-$ifname.vlan
 760                 append bss_conf "dynamic_vlan=$dynamic_vlan" "$N"
 761                 append bss_conf "vlan_naming=$vlan_naming" "$N"
 762                 [ -n "$vlan_bridge" ] && \
 763                         append bss_conf "vlan_bridge=$vlan_bridge" "$N"
 764                 [ -n "$vlan_tagged_interface" ] && \
 765                         append bss_conf "vlan_tagged_interface=$vlan_tagged_interface" "$N"
 766                 [ -n "$vlan_file" ] && {
 767                         [ -e "$vlan_file" ] || touch "$vlan_file"
 768                         append bss_conf "vlan_file=$vlan_file" "$N"
 769                 }
 770         }
 771
 772         local hs20 disable_dgaf osen anqp_domain_id hs20_deauth_req_timeout \
 773                 osu_ssid hs20_wan_metrics hs20_operating_class hs20_t_c_filename hs20_t_c_timestamp
 774         json_get_vars hs20 disable_dgaf osen anqp_domain_id hs20_deauth_req_timeout \
 775                 osu_ssid hs20_wan_metrics hs20_operating_class hs20_t_c_filename hs20_t_c_timestamp
 776
 777         set_default hs20 0
 778         set_default disable_dgaf $hs20
 779         set_default osen 0
 780         set_default anqp_domain_id 0
 781         set_default hs20_deauth_req_timeout 60
 782         if [ "$hs20" = "1" ]; then
 783                 append bss_conf "hs20=1" "$N"
 784                 append_hs20_icons
 785                 append bss_conf "disable_dgaf=$disable_dgaf" "$N"
 786                 append bss_conf "osen=$osen" "$N"
 787                 append bss_conf "anqp_domain_id=$anqp_domain_id" "$N"
 788                 append bss_conf "hs20_deauth_req_timeout=$hs20_deauth_req_timeout" "$N"
 789                 [ -n "$osu_ssid" ] && append bss_conf "osu_ssid=$osu_ssid" "$N"
 790                 [ -n "$hs20_wan_metrics" ] && append bss_conf "hs20_wan_metrics=$hs20_wan_metrics" "$N"
 791                 [ -n "$hs20_operating_class" ] && append bss_conf "hs20_operating_class=$hs20_operating_class" "$N"
 792                 [ -n "$hs20_t_c_filename" ] && append bss_conf "hs20_t_c_filename=$hs20_t_c_filename" "$N"
 793                 [ -n "$hs20_t_c_timestamp" ] && append bss_conf "hs20_t_c_timestamp=$hs20_t_c_timestamp" "$N"
 794                 json_for_each_item append_hs20_conn_capab hs20_conn_capab
 795                 json_for_each_item append_hs20_oper_friendly_name hs20_oper_friendly_name
 796                 json_for_each_item append_osu_provider osu_provider
 797                 json_for_each_item append_operator_icon operator_icon
 798         fi
 799
 800         bss_md5sum=$(echo $bss_conf | md5sum | cut -d" " -f1)
 801         append bss_conf "config_id=$bss_md5sum" "$N"
 802
 803         append "$var" "$bss_conf" "$N"
 804         return 0
 805 }
 806
 807 hostapd_set_log_options() {
 808         local var="$1"
 809
 810         local log_level log_80211 log_8021x log_radius log_wpa log_driver log_iapp log_mlme
 811         json_get_vars log_level log_80211 log_8021x log_radius log_wpa log_driver log_iapp log_mlme
 812
 813         set_default log_level 2
 814         set_default log_80211  1
 815         set_default log_8021x  1
 816         set_default log_radius 1
 817         set_default log_wpa    1
 818         set_default log_driver 1
 819         set_default log_iapp   1
 820         set_default log_mlme   1
 821
 822         local log_mask=$(( \
 823                 ($log_80211  << 0) | \
 824                 ($log_8021x  << 1) | \
 825                 ($log_radius << 2) | \
 826                 ($log_wpa    << 3) | \
 827                 ($log_driver << 4) | \
 828                 ($log_iapp   << 5) | \
 829                 ($log_mlme   << 6)   \
 830         ))
 831
 832         append "$var" "logger_syslog=$log_mask" "$N"
 833         append "$var" "logger_syslog_level=$log_level" "$N"
 834         append "$var" "logger_stdout=$log_mask" "$N"
 835         append "$var" "logger_stdout_level=$log_level" "$N"
 836
 837         return 0
 838 }
 839
 840 _wpa_supplicant_common() {
 841         local ifname="$1"
 842
 843         _rpath="/var/run/wpa_supplicant"
 844         _config="${_rpath}-$ifname.conf"
 845 }
 846
 847 wpa_supplicant_teardown_interface() {
 848         _wpa_supplicant_common "$1"
 849         rm -rf "$_rpath/$1" "$_config"
 850 }
 851
 852 wpa_supplicant_prepare_interface() {
 853         local ifname="$1"
 854         _w_driver="$2"
 855
 856         _wpa_supplicant_common "$1"
 857
 858         json_get_vars mode wds multi_ap
 859
 860         [ -n "$network_bridge" ] && {
 861                 fail=
 862                 case "$mode" in
 863                         adhoc)
 864                                 fail=1
 865                         ;;
 866                         sta)
 867                                 [ "$wds" = 1 -o "$multi_ap" = 1 ] || fail=1
 868                         ;;
 869                 esac
 870
 871                 [ -n "$fail" ] && {
 872                         wireless_setup_vif_failed BRIDGE_NOT_ALLOWED
 873                         return 1
 874                 }
 875         }
 876
 877         local ap_scan=
 878
 879         _w_mode="$mode"
 880
 881         [ "$mode" = adhoc ] && {
 882                 ap_scan="ap_scan=2"
 883         }
 884
 885         local country_str=
 886         [ -n "$country" ] && {
 887                 country_str="country=$country"
 888         }
 889
 890         multiap_flag_file="${_config}.is_multiap"
 891         if [ "$multi_ap" = "1" ]; then
 892                 touch "$multiap_flag_file"
 893         else
 894                 [ -e "$multiap_flag_file" ] && rm "$multiap_flag_file"
 895         fi
 896         wpa_supplicant_teardown_interface "$ifname"
 897         cat > "$_config" <<EOF
 898 ${scan_list:+freq_list=$scan_list}
 899 $ap_scan
 900 $country_str
 901 EOF
 902         return 0
 903 }
 904
 905 wpa_supplicant_set_fixed_freq() {
 906         local freq="$1"
 907         local htmode="$2"
 908
 909         append network_data "fixed_freq=1" "$N$T"
 910         append network_data "frequency=$freq" "$N$T"
 911         case "$htmode" in
 912                 NOHT) append network_data "disable_ht=1" "$N$T";;
 913                 HT20|VHT20) append network_data "disable_ht40=1" "$N$T";;
 914                 HT40*|VHT40*|VHT80*|VHT160*) append network_data "ht40=1" "$N$T";;
 915         esac
 916         case "$htmode" in
 917                 VHT*) append network_data "vht=1" "$N$T";;
 918         esac
 919         case "$htmode" in
 920                 VHT80) append network_data "max_oper_chwidth=1" "$N$T";;
 921                 VHT160) append network_data "max_oper_chwidth=2" "$N$T";;
 922                 VHT20|VHT40) append network_data "max_oper_chwidth=0" "$N$T";;
 923                 *) append network_data "disable_vht=1" "$N$T";;
 924         esac
 925 }
 926
 927 wpa_supplicant_add_network() {
 928         local ifname="$1"
 929         local freq="$2"
 930         local htmode="$3"
 931         local noscan="$4"
 932
 933         _wpa_supplicant_common "$1"
 934         wireless_vif_parse_encryption
 935
 936         json_get_vars \
 937                 ssid bssid key \
 938                 basic_rate mcast_rate \
 939                 ieee80211w ieee80211r \
 940                 multi_ap
 941
 942         case "$auth_type" in
 943                 sae|owe|eap192|eap-eap192)
 944                         set_default ieee80211w 2
 945                 ;;
 946                 psk-sae)
 947                         set_default ieee80211w 1
 948                 ;;
 949         esac
 950
 951         set_default ieee80211r 0
 952         set_default multi_ap 0
 953
 954         local key_mgmt='NONE'
 955         local enc_str=
 956         local network_data=
 957         local T="       "
 958
 959         local scan_ssid="scan_ssid=1"
 960         local freq wpa_key_mgmt
 961
 962         [ "$_w_mode" = "adhoc" ] && {
 963                 append network_data "mode=1" "$N$T"
 964                 [ -n "$freq" ] && wpa_supplicant_set_fixed_freq "$freq" "$htmode"
 965                 [ "$noscan" = "1" ] && append network_data "noscan=1" "$N$T"
 966
 967                 scan_ssid="scan_ssid=0"
 968
 969                 [ "$_w_driver" = "nl80211" ] || append wpa_key_mgmt "WPA-NONE"
 970         }
 971
 972         [ "$_w_mode" = "mesh" ] && {
 973                 json_get_vars mesh_id mesh_fwding mesh_rssi_threshold
 974                 [ -n "$mesh_id" ] && ssid="${mesh_id}"
 975
 976                 append network_data "mode=5" "$N$T"
 977                 [ -n "$mesh_fwding" ] && append network_data "mesh_fwding=${mesh_fwding}" "$N$T"
 978                 [ -n "$mesh_rssi_threshold" ] && append network_data "mesh_rssi_threshold=${mesh_rssi_threshold}" "$N$T"
 979                 [ -n "$freq" ] && wpa_supplicant_set_fixed_freq "$freq" "$htmode"
 980                 [ "$noscan" = "1" ] && append network_data "noscan=1" "$N$T"
 981                 append wpa_key_mgmt "SAE"
 982                 scan_ssid=""
 983         }
 984
 985         [ "$multi_ap" = 1 -a "$_w_mode" = "sta" ] && append network_data "multi_ap_backhaul_sta=1" "$N$T"
 986
 987         case "$auth_type" in
 988                 none) ;;
 989                 owe)
 990                         hostapd_append_wpa_key_mgmt
 991                         key_mgmt="$wpa_key_mgmt"
 992                 ;;
 993                 wep)
 994                         local wep_keyidx=0
 995                         hostapd_append_wep_key network_data
 996                         append network_data "wep_tx_keyidx=$wep_keyidx" "$N$T"
 997                 ;;
 998                 wps)
 999                         key_mgmt='WPS'
1000                 ;;
1001                 psk|sae|psk-sae)
1002                         local passphrase
1003
1004                         if [ "$_w_mode" != "mesh" ]; then
1005                                 hostapd_append_wpa_key_mgmt
1006                         fi
1007
1008                         key_mgmt="$wpa_key_mgmt"
1009
1010                         if [ ${#key} -eq 64 ]; then
1011                                 passphrase="psk=${key}"
1012                         else
1013                                 if [ "$_w_mode" = "mesh" ]; then
1014                                         passphrase="sae_password=\"${key}\""
1015                                 else
1016                                         passphrase="psk=\"${key}\""
1017                                 fi
1018                         fi
1019                         append network_data "$passphrase" "$N$T"
1020                 ;;
1021                 eap|eap192|eap-eap192)
1022                         hostapd_append_wpa_key_mgmt
1023                         key_mgmt="$wpa_key_mgmt"
1024
1025                         json_get_vars eap_type identity anonymous_identity ca_cert ca_cert_usesystem
1026
1027                         if [ "$ca_cert_usesystem" -eq "1" -a -f "/etc/ssl/certs/ca-certificates.crt" ]; then
1028                                 append network_data "ca_cert=\"/etc/ssl/certs/ca-certificates.crt\"" "$N$T"
1029                         else
1030                                 [ -n "$ca_cert" ] && append network_data "ca_cert=\"$ca_cert\"" "$N$T"
1031                         fi
1032                         [ -n "$identity" ] && append network_data "identity=\"$identity\"" "$N$T"
1033                         [ -n "$anonymous_identity" ] && append network_data "anonymous_identity=\"$anonymous_identity\"" "$N$T"
1034                         case "$eap_type" in
1035                                 tls)
1036                                         json_get_vars client_cert priv_key priv_key_pwd
1037                                         append network_data "client_cert=\"$client_cert\"" "$N$T"
1038                                         append network_data "private_key=\"$priv_key\"" "$N$T"
1039                                         append network_data "private_key_passwd=\"$priv_key_pwd\"" "$N$T"
1040
1041                                         json_get_vars subject_match
1042                                         [ -n "$subject_match" ] && append network_data "subject_match=\"$subject_match\"" "$N$T"
1043
1044                                         json_get_values altsubject_match altsubject_match
1045                                         if [ -n "$altsubject_match" ]; then
1046                                                 local list=
1047                                                 for x in $altsubject_match; do
1048                                                         append list "$x" ";"
1049                                                 done
1050                                                 append network_data "altsubject_match=\"$list\"" "$N$T"
1051                                         fi
1052
1053                                         json_get_values domain_match domain_match
1054                                         if [ -n "$domain_match" ]; then
1055                                                 local list=
1056                                                 for x in $domain_match; do
1057                                                         append list "$x" ";"
1058                                                 done
1059                                                 append network_data "domain_match=\"$list\"" "$N$T"
1060                                         fi
1061
1062                                         json_get_values domain_suffix_match domain_suffix_match
1063                                         if [ -n "$domain_suffix_match" ]; then
1064                                                 local list=
1065                                                 for x in $domain_suffix_match; do
1066                                                         append list "$x" ";"
1067                                                 done
1068                                                 append network_data "domain_suffix_match=\"$list\"" "$N$T"
1069                                         fi
1070                                 ;;
1071                                 fast|peap|ttls)
1072                                         json_get_vars auth password ca_cert2 ca_cert2_usesystem client_cert2 priv_key2 priv_key2_pwd
1073                                         set_default auth MSCHAPV2
1074
1075                                         if [ "$auth" = "EAP-TLS" ]; then
1076                                                 if [ "$ca_cert2_usesystem" -eq "1" -a -f "/etc/ssl/certs/ca-certificates.crt" ]; then
1077                                                         append network_data "ca_cert2=\"/etc/ssl/certs/ca-certificates.crt\"" "$N$T"
1078                                                 else
1079                                                         [ -n "$ca_cert2" ] && append network_data "ca_cert2=\"$ca_cert2\"" "$N$T"
1080                                                 fi
1081                                                 append network_data "client_cert2=\"$client_cert2\"" "$N$T"
1082                                                 append network_data "private_key2=\"$priv_key2\"" "$N$T"
1083                                                 append network_data "private_key2_passwd=\"$priv_key2_pwd\"" "$N$T"
1084                                         else
1085                                                 append network_data "password=\"$password\"" "$N$T"
1086                                         fi
1087
1088                                         json_get_vars subject_match
1089                                         [ -n "$subject_match" ] && append network_data "subject_match=\"$subject_match\"" "$N$T"
1090
1091                                         json_get_values altsubject_match altsubject_match
1092                                         if [ -n "$altsubject_match" ]; then
1093                                                 local list=
1094                                                 for x in $altsubject_match; do
1095                                                         append list "$x" ";"
1096                                                 done
1097                                                 append network_data "altsubject_match=\"$list\"" "$N$T"
1098                                         fi
1099
1100                                         json_get_values domain_match domain_match
1101                                         if [ -n "$domain_match" ]; then
1102                                                 local list=
1103                                                 for x in $domain_match; do
1104                                                         append list "$x" ";"
1105                                                 done
1106                                                 append network_data "domain_match=\"$list\"" "$N$T"
1107                                         fi
1108
1109                                         json_get_values domain_suffix_match domain_suffix_match
1110                                         if [ -n "$domain_suffix_match" ]; then
1111                                                 local list=
1112                                                 for x in $domain_suffix_match; do
1113                                                         append list "$x" ";"
1114                                                 done
1115                                                 append network_data "domain_suffix_match=\"$list\"" "$N$T"
1116                                         fi
1117
1118                                         phase2proto="auth="
1119                                         case "$auth" in
1120                                                 "auth"*)
1121                                                         phase2proto=""
1122                                                 ;;
1123                                                 "EAP-"*)
1124                                                         auth="$(echo $auth | cut -b 5- )"
1125                                                         [ "$eap_type" = "ttls" ] &&
1126                                                                 phase2proto="autheap="
1127                                                         json_get_vars subject_match2
1128                                                         [ -n "$subject_match2" ] && append network_data "subject_match2=\"$subject_match2\"" "$N$T"
1129
1130                                                         json_get_values altsubject_match2 altsubject_match2
1131                                                         if [ -n "$altsubject_match2" ]; then
1132                                                                 local list=
1133                                                                 for x in $altsubject_match2; do
1134                                                                         append list "$x" ";"
1135                                                                 done
1136                                                                 append network_data "altsubject_match2=\"$list\"" "$N$T"
1137                                                         fi
1138
1139                                                         json_get_values domain_match2 domain_match2
1140                                                         if [ -n "$domain_match2" ]; then
1141                                                                 local list=
1142                                                                 for x in $domain_match2; do
1143                                                                         append list "$x" ";"
1144                                                                 done
1145                                                                 append network_data "domain_match2=\"$list\"" "$N$T"
1146                                                         fi
1147
1148                                                         json_get_values domain_suffix_match2 domain_suffix_match2
1149                                                         if [ -n "$domain_suffix_match2" ]; then
1150                                                                 local list=
1151                                                                 for x in $domain_suffix_match2; do
1152                                                                         append list "$x" ";"
1153                                                                 done
1154                                                                 append network_data "domain_suffix_match2=\"$list\"" "$N$T"
1155                                                         fi
1156                                                 ;;
1157                                         esac
1158                                         append network_data "phase2=\"$phase2proto$auth\"" "$N$T"
1159                                 ;;
1160                         esac
1161                         append network_data "eap=$(echo $eap_type | tr 'a-z' 'A-Z')" "$N$T"
1162                 ;;
1163         esac
1164
1165         [ "$mode" = mesh ] || {
1166                 case "$wpa" in
1167                         1)
1168                                 append network_data "proto=WPA" "$N$T"
1169                         ;;
1170                         2)
1171                                 append network_data "proto=RSN" "$N$T"
1172                         ;;
1173                 esac
1174
1175                 case "$ieee80211w" in
1176                         [012])
1177                                 [ "$wpa" -ge 2 ] && append network_data "ieee80211w=$ieee80211w" "$N$T"
1178                         ;;
1179                 esac
1180         }
1181         [ -n "$bssid" ] && append network_data "bssid=$bssid" "$N$T"
1182         [ -n "$beacon_int" ] && append network_data "beacon_int=$beacon_int" "$N$T"
1183
1184         local bssid_blacklist bssid_whitelist
1185         json_get_values bssid_blacklist bssid_blacklist
1186         json_get_values bssid_whitelist bssid_whitelist
1187
1188         [ -n "$bssid_blacklist" ] && append network_data "bssid_blacklist=$bssid_blacklist" "$N$T"
1189         [ -n "$bssid_whitelist" ] && append network_data "bssid_whitelist=$bssid_whitelist" "$N$T"
1190
1191         [ -n "$basic_rate" ] && {
1192                 local br rate_list=
1193                 for br in $basic_rate; do
1194                         wpa_supplicant_add_rate rate_list "$br"
1195                 done
1196                 [ -n "$rate_list" ] && append network_data "rates=$rate_list" "$N$T"
1197         }
1198
1199         [ -n "$mcast_rate" ] && {
1200                 local mc_rate=
1201                 wpa_supplicant_add_rate mc_rate "$mcast_rate"
1202                 append network_data "mcast_rate=$mc_rate" "$N$T"
1203         }
1204
1205         if [ "$key_mgnt" = "WPS" ]; then
1206                 echo "wps_cred_processing=1" >> "$_config"
1207         else
1208                 cat >> "$_config" <<EOF
1209 network={
1210         $scan_ssid
1211         ssid="$ssid"
1212         key_mgmt=$key_mgmt
1213         $network_data
1214 }
1215 EOF
1216         fi
1217         return 0
1218 }
1219
1220 wpa_supplicant_run() {
1221         local ifname="$1"
1222         local hostapd_ctrl="$2"
1223
1224         _wpa_supplicant_common "$ifname"
1225
1226         ubus wait_for wpa_supplicant
1227         ubus call wpa_supplicant config_add "{ \
1228                 \"driver\": \"${_w_driver:-wext}\", \"ctrl\": \"$_rpath\", \
1229                 \"iface\": \"$ifname\", \"config\": \"$_config\" \
1230                 ${network_bridge:+, \"bridge\": \"$network_bridge\"} \
1231                 ${hostapd_ctrl:+, \"hostapd_ctrl\": \"$hostapd_ctrl\"} \
1232                 }"
1233
1234         ret="$?"
1235
1236         [ "$ret" != 0 ] && wireless_setup_vif_failed WPA_SUPPLICANT_FAILED
1237
1238         local supplicant_pid=$(ubus call service list '{"name": "wpad"}' | jsonfilter -l 1 -e "@['wpad'].instances['supplicant'].pid")
1239         wireless_add_process "$supplicant_pid" "/usr/sbin/wpa_supplicant" 1
1240
1241         return $ret
1242 }
1243
1244 hostapd_common_cleanup() {
1245         killall meshd-nl80211
1246 }