projects / openwrt / openwrt.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
history | raw | HEAD
switch: the BCM5365 is a special switch and the BCM5350 or BCM5325 is the normal...
[openwrt/openwrt.git] / package / switch / src / switch-robo.c
1 /*
2 * Broadcom BCM5325E/536x switch configuration module
3 *
4 * Copyright (C) 2005 Felix Fietkau <nbd@nbd.name>
5 * Copyright (C) 2008 Michael Buesch <mb@bu3sch.de>
6 * Based on 'robocfg' by Oleg I. Vdovikin
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License
10 * as published by the Free Software Foundation; either version 2
11 * of the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
21 * 02110-1301, USA.
22 */
23
24 #include <linux/module.h>
25 #include <linux/init.h>
26 #include <linux/if.h>
27 #include <linux/if_arp.h>
28 #include <linux/sockios.h>
29 #include <linux/ethtool.h>
30 #include <linux/mii.h>
31 #include <linux/delay.h>
32 #include <linux/gpio.h>
33 #include <asm/uaccess.h>
34
35 #include "switch-core.h"
36 #include "etc53xx.h"
37
38 #ifdef CONFIG_BCM47XX
39 #include <bcm47xx_nvram.h>
40 #endif
41
42 #define DRIVER_NAME "bcm53xx"
43 #define DRIVER_VERSION "0.02"
44 #define PFX "roboswitch: "
45
46 #define ROBO_PHY_ADDR 0x1E /* robo switch phy address */
47 #define ROBO_PHY_ADDR_TG3 0x01 /* Tigon3 PHY address */
48 #define ROBO_PHY_ADDR_BCM63XX 0x00 /* BCM63XX PHY address */
49
50 /* MII registers */
51 #define REG_MII_PAGE 0x10 /* MII Page register */
52 #define REG_MII_ADDR 0x11 /* MII Address register */
53 #define REG_MII_DATA0 0x18 /* MII Data register 0 */
54
55 #define REG_MII_PAGE_ENABLE 1
56 #define REG_MII_ADDR_WRITE 1
57 #define REG_MII_ADDR_READ 2
58
59 /* Robo device ID register (in ROBO_MGMT_PAGE) */
60 #define ROBO_DEVICE_ID 0x30
61 #define ROBO_DEVICE_ID_5325 0x25 /* Faked */
62 #define ROBO_DEVICE_ID_5395 0x95
63 #define ROBO_DEVICE_ID_5397 0x97
64 #define ROBO_DEVICE_ID_5398 0x98
65 #define ROBO_DEVICE_ID_53115 0x3115
66
67 /* Private et.o ioctls */
68 #define SIOCGETCPHYRD (SIOCDEVPRIVATE + 9)
69 #define SIOCSETCPHYWR (SIOCDEVPRIVATE + 10)
70
71 /* Data structure for a Roboswitch device. */
72 struct robo_switch {
73 char *device; /* The device name string (ethX) */
74 u16 devid; /* ROBO_DEVICE_ID_53xx */
75 bool is_5365;
76 bool gmii; /* gigabit mii */
77 int gpio_robo_reset;
78 int gpio_lanports_enable;
79 struct ifreq ifr;
80 struct net_device *dev;
81 unsigned char port[6];
82 };
83
84 /* Currently we can only have one device in the system. */
85 static struct robo_switch robo;
86
87
88 static int do_ioctl(int cmd)
89 {
90 mm_segment_t old_fs = get_fs();
91 int ret;
92
93 set_fs(KERNEL_DS);
94 ret = robo.dev->netdev_ops->ndo_do_ioctl(robo.dev, &robo.ifr, cmd);
95 set_fs(old_fs);
96
97 return ret;
98 }
99
100 static u16 mdio_read(__u16 phy_id, __u8 reg)
101 {
102 struct mii_ioctl_data *mii = if_mii(&robo.ifr);
103 int err;
104
105 mii->phy_id = phy_id;
106 mii->reg_num = reg;
107
108 err = do_ioctl(SIOCGMIIREG);
109 if (err < 0) {
110 printk(KERN_ERR PFX "failed to read mdio reg %i with err %i.\n", reg, err);
111
112 return 0xffff;
113 }
114
115 return mii->val_out;
116 }
117
118 static void mdio_write(__u16 phy_id, __u8 reg, __u16 val)
119 {
120 struct mii_ioctl_data *mii = if_mii(&robo.ifr);
121 int err;
122
123 mii->phy_id = phy_id;
124 mii->reg_num = reg;
125 mii->val_in = val;
126
127 err = do_ioctl(SIOCSMIIREG);
128 if (err < 0) {
129 printk(KERN_ERR PFX "failed to write mdio reg: %i with err %i.\n", reg, err);
130 return;
131 }
132 }
133
134 static int robo_reg(__u8 page, __u8 reg, __u8 op)
135 {
136 int i = 3;
137
138 /* set page number */
139 mdio_write(ROBO_PHY_ADDR, REG_MII_PAGE,
140 (page << 8) | REG_MII_PAGE_ENABLE);
141
142 /* set register address */
143 mdio_write(ROBO_PHY_ADDR, REG_MII_ADDR,
144 (reg << 8) | op);
145
146 /* check if operation completed */
147 while (i--) {
148 if ((mdio_read(ROBO_PHY_ADDR, REG_MII_ADDR) & 3) == 0)
149 return 0;
150 }
151
152 printk(KERN_ERR PFX "timeout in robo_reg on page %i and reg %i with op %i.\n", page, reg, op);
153
154 return 1;
155 }
156
157 /*
158 static void robo_read(__u8 page, __u8 reg, __u16 *val, int count)
159 {
160 int i;
161
162 robo_reg(page, reg, REG_MII_ADDR_READ);
163
164 for (i = 0; i < count; i++)
165 val[i] = mdio_read(ROBO_PHY_ADDR, REG_MII_DATA0 + i);
166 }
167 */
168
169 static __u16 robo_read16(__u8 page, __u8 reg)
170 {
171 robo_reg(page, reg, REG_MII_ADDR_READ);
172
173 return mdio_read(ROBO_PHY_ADDR, REG_MII_DATA0);
174 }
175
176 static __u32 robo_read32(__u8 page, __u8 reg)
177 {
178 robo_reg(page, reg, REG_MII_ADDR_READ);
179
180 return mdio_read(ROBO_PHY_ADDR, REG_MII_DATA0) |
181 (mdio_read(ROBO_PHY_ADDR, REG_MII_DATA0 + 1) << 16);
182 }
183
184 static void robo_write16(__u8 page, __u8 reg, __u16 val16)
185 {
186 /* write data */
187 mdio_write(ROBO_PHY_ADDR, REG_MII_DATA0, val16);
188
189 robo_reg(page, reg, REG_MII_ADDR_WRITE);
190 }
191
192 static void robo_write32(__u8 page, __u8 reg, __u32 val32)
193 {
194 /* write data */
195 mdio_write(ROBO_PHY_ADDR, REG_MII_DATA0, val32 & 0xFFFF);
196 mdio_write(ROBO_PHY_ADDR, REG_MII_DATA0 + 1, val32 >> 16);
197
198 robo_reg(page, reg, REG_MII_ADDR_WRITE);
199 }
200
201 /* checks that attached switch is 5365 */
202 static bool robo_bcm5365(void)
203 {
204 /* set vlan access id to 15 and read it back */
205 __u16 val16 = 15;
206 robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS, val16);
207
208 /* 5365 will refuse this as it does not have this reg */
209 return robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS) != val16;
210 }
211
212 static bool robo_gmii(void)
213 {
214 if (mdio_read(0, ROBO_MII_STAT) & 0x0100)
215 return ((mdio_read(0, 0x0f) & 0xf000) != 0);
216 return false;
217 }
218
219 static int robo_switch_enable(void)
220 {
221 unsigned int i, last_port;
222 u16 val;
223 #ifdef CONFIG_BCM47XX
224 char buf[20];
225 #endif
226
227 val = robo_read16(ROBO_CTRL_PAGE, ROBO_SWITCH_MODE);
228 if (!(val & (1 << 1))) {
229 /* Unmanaged mode */
230 val &= ~(1 << 0);
231 /* With forwarding */
232 val |= (1 << 1);
233 robo_write16(ROBO_CTRL_PAGE, ROBO_SWITCH_MODE, val);
234 val = robo_read16(ROBO_CTRL_PAGE, ROBO_SWITCH_MODE);
235 if (!(val & (1 << 1))) {
236 printk(KERN_ERR PFX "Failed to enable switch\n");
237 return -EBUSY;
238 }
239
240 last_port = (robo.devid == ROBO_DEVICE_ID_5398) ?
241 ROBO_PORT6_CTRL : ROBO_PORT3_CTRL;
242 for (i = ROBO_PORT0_CTRL; i < last_port + 1; i++)
243 robo_write16(ROBO_CTRL_PAGE, i, 0);
244 }
245
246 #ifdef CONFIG_BCM47XX
247 /* WAN port LED, except for Netgear WGT634U */
248 if (bcm47xx_nvram_getenv("nvram_type", buf, sizeof(buf)) >= 0) {
249 if (strcmp(buf, "cfe") != 0)
250 robo_write16(ROBO_CTRL_PAGE, 0x16, 0x1F);
251 }
252 #endif
253 return 0;
254 }
255
256 static void robo_switch_reset(void)
257 {
258 if ((robo.devid == ROBO_DEVICE_ID_5395) ||
259 (robo.devid == ROBO_DEVICE_ID_5397) ||
260 (robo.devid == ROBO_DEVICE_ID_5398)) {
261 /* Trigger a software reset. */
262 robo_write16(ROBO_CTRL_PAGE, 0x79, 0x83);
263 mdelay(500);
264 robo_write16(ROBO_CTRL_PAGE, 0x79, 0);
265 }
266 }
267
268 #ifdef CONFIG_BCM47XX
269 static int get_gpio_pin(const char *name)
270 {
271 int i, err;
272 char nvram_var[10];
273 char buf[30];
274
275 for (i = 0; i < 16; i++) {
276 err = snprintf(nvram_var, sizeof(nvram_var), "gpio%i", i);
277 if (err <= 0)
278 continue;
279 err = bcm47xx_nvram_getenv(nvram_var, buf, sizeof(buf));
280 if (err <= 0)
281 continue;
282 if (!strcmp(name, buf))
283 return i;
284 }
285 return -1;
286 }
287 #endif
288
289 static int robo_probe(char *devname)
290 {
291 __u32 phyid;
292 unsigned int i;
293 int err = -1;
294 struct mii_ioctl_data *mii;
295
296 printk(KERN_INFO PFX "Probing device '%s'\n", devname);
297 strcpy(robo.ifr.ifr_name, devname);
298
299 if ((robo.dev = dev_get_by_name(&init_net, devname)) == NULL) {
300 printk(KERN_ERR PFX "No such device\n");
301 err = -ENODEV;
302 goto err_done;
303 }
304 if (!robo.dev->netdev_ops || !robo.dev->netdev_ops->ndo_do_ioctl) {
305 printk(KERN_ERR PFX "ndo_do_ioctl not implemented in ethernet driver\n");
306 err = -ENXIO;
307 goto err_put;
308 }
309
310 robo.device = devname;
311 for (i = 0; i < 5; i++)
312 robo.port[i] = i;
313 robo.port[5] = 8;
314
315 /* try access using MII ioctls - get phy address */
316 err = do_ioctl(SIOCGMIIPHY);
317 if (err < 0) {
318 printk(KERN_ERR PFX "error (%i) while accessing MII phy registers with ioctls\n", err);
319 goto err_put;
320 }
321
322 /* got phy address check for robo address */
323 mii = if_mii(&robo.ifr);
324 if ((mii->phy_id != ROBO_PHY_ADDR) &&
325 (mii->phy_id != ROBO_PHY_ADDR_BCM63XX) &&
326 (mii->phy_id != ROBO_PHY_ADDR_TG3)) {
327 printk(KERN_ERR PFX "Invalid phy address (%d)\n", mii->phy_id);
328 err = -ENODEV;
329 goto err_put;
330 }
331
332 #ifdef CONFIG_BCM47XX
333 robo.gpio_lanports_enable = get_gpio_pin("lanports_enable");
334 if (robo.gpio_lanports_enable >= 0) {
335 err = gpio_request(robo.gpio_lanports_enable, "lanports_enable");
336 if (err) {
337 printk(KERN_ERR PFX "error (%i) requesting lanports_enable gpio (%i)\n",
338 err, robo.gpio_lanports_enable);
339 goto err_put;
340 }
341 gpio_direction_output(robo.gpio_lanports_enable, 1);
342 mdelay(5);
343 }
344
345 robo.gpio_robo_reset = get_gpio_pin("robo_reset");
346 if (robo.gpio_robo_reset >= 0) {
347 err = gpio_request(robo.gpio_robo_reset, "robo_reset");
348 if (err) {
349 printk(KERN_ERR PFX "error (%i) requesting robo_reset gpio (%i)\n",
350 err, robo.gpio_robo_reset);
351 goto err_gpio_robo;
352 }
353 gpio_set_value(robo.gpio_robo_reset, 0);
354 gpio_direction_output(robo.gpio_robo_reset, 1);
355 gpio_set_value(robo.gpio_robo_reset, 0);
356 mdelay(50);
357
358 gpio_set_value(robo.gpio_robo_reset, 1);
359 mdelay(20);
360 } else {
361 // TODO: reset the internal robo switch
362 }
363 #endif
364
365 phyid = mdio_read(ROBO_PHY_ADDR, 0x2) |
366 (mdio_read(ROBO_PHY_ADDR, 0x3) << 16);
367
368 if (phyid == 0xffffffff || phyid == 0x55210022) {
369 printk(KERN_ERR PFX "No Robo switch in managed mode found, phy_id = 0x%08x\n", phyid);
370 err = -ENODEV;
371 goto err_gpio_lanports;
372 }
373
374 /* Get the device ID */
375 for (i = 0; i < 10; i++) {
376 robo.devid = robo_read16(ROBO_MGMT_PAGE, ROBO_DEVICE_ID);
377 if (robo.devid)
378 break;
379 udelay(10);
380 }
381 if (!robo.devid)
382 robo.devid = ROBO_DEVICE_ID_5325; /* Fake it */
383 if (robo.devid == ROBO_DEVICE_ID_5325)
384 robo.is_5365 = robo_bcm5365();
385 else
386 robo.is_5365 = false;
387
388 robo.gmii = robo_gmii();
389
390 robo_switch_reset();
391 err = robo_switch_enable();
392 if (err)
393 goto err_gpio_lanports;
394
395 printk(KERN_INFO PFX "found a 5%s%x!%s at %s\n", robo.devid & 0xff00 ? "" : "3", robo.devid,
396 robo.is_5365 ? " It's a BCM5365." : "", devname);
397
398 return 0;
399
400 err_gpio_lanports:
401 if (robo.gpio_lanports_enable >= 0)
402 gpio_free(robo.gpio_lanports_enable);
403 err_gpio_robo:
404 if (robo.gpio_robo_reset >= 0)
405 gpio_free(robo.gpio_robo_reset);
406 err_put:
407 dev_put(robo.dev);
408 robo.dev = NULL;
409 err_done:
410 return err;
411 }
412
413
414 static int handle_vlan_port_read(void *driver, char *buf, int nr)
415 {
416 __u16 val16;
417 int len = 0;
418 int j;
419
420 val16 = (nr) /* vlan */ | (0 << 12) /* read */ | (1 << 13) /* enable */;
421
422 if (!robo.is_5365) {
423 u32 val32;
424 robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS, val16);
425 /* actual read */
426 val32 = robo_read32(ROBO_VLAN_PAGE, ROBO_VLAN_READ);
427 if ((val32 & (1 << 20)) /* valid */) {
428 for (j = 0; j < 6; j++) {
429 if (val32 & (1 << j)) {
430 len += sprintf(buf + len, "%d", j);
431 if (val32 & (1 << (j + 6))) {
432 if (j == 5) buf[len++] = 'u';
433 } else {
434 buf[len++] = 't';
435 if (robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_PORT0_DEF_TAG + (j << 1)) == nr)
436 buf[len++] = '*';
437 }
438 buf[len++] = '\t';
439 }
440 }
441 len += sprintf(buf + len, "\n");
442 }
443 } else {
444 robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5365, val16);
445 /* actual read */
446 val16 = robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_READ);
447 if ((val16 & (1 << 14)) /* valid */) {
448 for (j = 0; j < 6; j++) {
449 if (val16 & (1 << j)) {
450 len += sprintf(buf + len, "%d", j);
451 if (val16 & (1 << (j + 7))) {
452 if (j == 5) buf[len++] = 'u';
453 } else {
454 buf[len++] = 't';
455 if (robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_PORT0_DEF_TAG + (j << 1)) == nr)
456 buf[len++] = '*';
457 }
458 buf[len++] = '\t';
459 }
460 }
461 len += sprintf(buf + len, "\n");
462 }
463 }
464
465 buf[len] = '\0';
466
467 return len;
468 }
469
470 static int handle_vlan_port_write(void *driver, char *buf, int nr)
471 {
472 switch_driver *d = (switch_driver *) driver;
473 switch_vlan_config *c = switch_parse_vlan(d, buf);
474 int j;
475 __u16 val16;
476
477 if (c == NULL)
478 return -EINVAL;
479
480 for (j = 0; j < d->ports; j++) {
481 if ((c->untag | c->pvid) & (1 << j))
482 /* change default vlan tag */
483 robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_PORT0_DEF_TAG + (j << 1), nr);
484 }
485
486 /* write config now */
487
488 if (robo.devid != ROBO_DEVICE_ID_5325) {
489 __u8 regoff = ((robo.devid == ROBO_DEVICE_ID_5395) ||
490 (robo.devid == ROBO_DEVICE_ID_53115)) ? 0x20 : 0;
491
492 robo_write32(ROBO_ARLIO_PAGE, 0x63 + regoff, (c->untag << 9) | c->port);
493 robo_write16(ROBO_ARLIO_PAGE, 0x61 + regoff, nr);
494 robo_write16(ROBO_ARLIO_PAGE, 0x60 + regoff, 1 << 7);
495 kfree(c);
496 return 0;
497 }
498
499 val16 = (nr) /* vlan */ | (1 << 12) /* write */ | (1 << 13) /* enable */;
500 if (robo.is_5365) {
501 robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_WRITE_5365,
502 (1 << 14) /* valid */ | (c->untag << 7) | c->port);
503 robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5365, val16);
504 } else {
505 robo_write32(ROBO_VLAN_PAGE, ROBO_VLAN_WRITE,
506 (1 << 20) /* valid */ | (c->untag << 6) | c->port);
507 robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS, val16);
508 }
509
510 kfree(c);
511 return 0;
512 }
513
514 #define set_switch(state) \
515 robo_write16(ROBO_CTRL_PAGE, ROBO_SWITCH_MODE, (robo_read16(ROBO_CTRL_PAGE, ROBO_SWITCH_MODE) & ~2) | (state ? 2 : 0));
516
517 static int handle_enable_read(void *driver, char *buf, int nr)
518 {
519 return sprintf(buf, "%d\n", (((robo_read16(ROBO_CTRL_PAGE, ROBO_SWITCH_MODE) & 2) == 2) ? 1 : 0));
520 }
521
522 static int handle_enable_write(void *driver, char *buf, int nr)
523 {
524 set_switch(buf[0] == '1');
525
526 return 0;
527 }
528
529 static int handle_port_enable_read(void *driver, char *buf, int nr)
530 {
531 return sprintf(buf, "%d\n", ((robo_read16(ROBO_CTRL_PAGE, robo.port[nr]) & 3) == 3 ? 0 : 1));
532 }
533
534 static int handle_port_enable_write(void *driver, char *buf, int nr)
535 {
536 u16 val16;
537
538 if (buf[0] == '0')
539 val16 = 3; /* disabled */
540 else if (buf[0] == '1')
541 val16 = 0; /* enabled */
542 else
543 return -EINVAL;
544
545 robo_write16(ROBO_CTRL_PAGE, robo.port[nr],
546 (robo_read16(ROBO_CTRL_PAGE, robo.port[nr]) & ~3) | val16);
547
548 return 0;
549 }
550
551 static int handle_port_media_read(void *driver, char *buf, int nr)
552 {
553 u16 bmcr = mdio_read(robo.port[nr], MII_BMCR);
554 int media, len;
555
556 if (bmcr & BMCR_ANENABLE)
557 media = SWITCH_MEDIA_AUTO;
558 else {
559 if (bmcr & BMCR_SPEED1000)
560 media = SWITCH_MEDIA_1000;
561 else if (bmcr & BMCR_SPEED100)
562 media = SWITCH_MEDIA_100;
563 else
564 media = 0;
565
566 if (bmcr & BMCR_FULLDPLX)
567 media |= SWITCH_MEDIA_FD;
568 }
569
570 len = switch_print_media(buf, media);
571 return len + sprintf(buf + len, "\n");
572 }
573
574 static int handle_port_media_write(void *driver, char *buf, int nr)
575 {
576 int media = switch_parse_media(buf);
577 u16 bmcr, bmcr_mask;
578
579 if (media & SWITCH_MEDIA_AUTO)
580 bmcr = BMCR_ANENABLE | BMCR_ANRESTART;
581 else {
582 if (media & SWITCH_MEDIA_1000) {
583 if (!robo.gmii)
584 return -EINVAL;
585 bmcr = BMCR_SPEED1000;
586 }
587 else if (media & SWITCH_MEDIA_100)
588 bmcr = BMCR_SPEED100;
589 else
590 bmcr = 0;
591
592 if (media & SWITCH_MEDIA_FD)
593 bmcr |= BMCR_FULLDPLX;
594 }
595
596 bmcr_mask = ~(BMCR_SPEED1000 | BMCR_SPEED100 | BMCR_FULLDPLX | BMCR_ANENABLE | BMCR_ANRESTART);
597 mdio_write(robo.port[nr], MII_BMCR,
598 (mdio_read(robo.port[nr], MII_BMCR) & bmcr_mask) | bmcr);
599
600 return 0;
601 }
602
603 static int handle_enable_vlan_read(void *driver, char *buf, int nr)
604 {
605 return sprintf(buf, "%d\n", (((robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL0) & (1 << 7)) == (1 << 7)) ? 1 : 0));
606 }
607
608 static int handle_enable_vlan_write(void *driver, char *buf, int nr)
609 {
610 int disable = ((buf[0] != '1') ? 1 : 0);
611
612 robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL0, disable ? 0 :
613 (1 << 7) /* 802.1Q VLAN */ | (3 << 5) /* mac check and hash */);
614 robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL1, disable ? 0 :
615 (robo.devid == ROBO_DEVICE_ID_5325 ? (1 << 1) :
616 0) | (1 << 2) | (1 << 3)); /* RSV multicast */
617
618 if (robo.devid != ROBO_DEVICE_ID_5325)
619 return 0;
620
621 robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL4, disable ? 0 :
622 (1 << 6) /* drop invalid VID frames */);
623 robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL5, disable ? 0 :
624 (1 << 3) /* drop miss V table frames */);
625
626 return 0;
627 }
628
629 static int handle_reset(void *driver, char *buf, int nr)
630 {
631 switch_driver *d = (switch_driver *) driver;
632 int j;
633 __u16 val16;
634
635 /* disable switching */
636 set_switch(0);
637
638 /* reset vlans */
639 for (j = 0; j <= ((robo.is_5365) ? VLAN_ID_MAX_5365 : VLAN_ID_MAX); j++) {
640 /* write config now */
641 val16 = (j) /* vlan */ | (1 << 12) /* write */ | (1 << 13) /* enable */;
642 if (robo.is_5365)
643 robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_WRITE_5365, 0);
644 else
645 robo_write32(ROBO_VLAN_PAGE, ROBO_VLAN_WRITE, 0);
646 robo_write16(ROBO_VLAN_PAGE, robo.is_5365 ? ROBO_VLAN_TABLE_ACCESS_5365 :
647 ROBO_VLAN_TABLE_ACCESS,
648 val16);
649 }
650
651 /* reset ports to a known good state */
652 for (j = 0; j < d->ports; j++) {
653 robo_write16(ROBO_CTRL_PAGE, robo.port[j], 0x0000);
654 robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_PORT0_DEF_TAG + (j << 1), 0);
655 }
656
657 /* enable switching */
658 set_switch(1);
659
660 /* enable vlans */
661 handle_enable_vlan_write(driver, "1", 0);
662
663 return 0;
664 }
665
666 static int __init robo_init(void)
667 {
668 int notfound = 1;
669 char *device;
670
671 device = strdup("ethX");
672 for (device[3] = '0'; (device[3] <= '3') && notfound; device[3]++) {
673 if (! switch_device_registered (device))
674 notfound = robo_probe(device);
675 }
676 device[3]--;
677
678 if (notfound) {
679 kfree(device);
680 return -ENODEV;
681 } else {
682 static const switch_config cfg[] = {
683 {
684 .name = "enable",
685 .read = handle_enable_read,
686 .write = handle_enable_write
687 }, {
688 .name = "enable_vlan",
689 .read = handle_enable_vlan_read,
690 .write = handle_enable_vlan_write
691 }, {
692 .name = "reset",
693 .read = NULL,
694 .write = handle_reset
695 }, { NULL, },
696 };
697 static const switch_config port[] = {
698 {
699 .name = "enable",
700 .read = handle_port_enable_read,
701 .write = handle_port_enable_write
702 }, {
703 .name = "media",
704 .read = handle_port_media_read,
705 .write = handle_port_media_write
706 }, { NULL, },
707 };
708 static const switch_config vlan[] = {
709 {
710 .name = "ports",
711 .read = handle_vlan_port_read,
712 .write = handle_vlan_port_write
713 }, { NULL, },
714 };
715 switch_driver driver = {
716 .name = DRIVER_NAME,
717 .version = DRIVER_VERSION,
718 .interface = device,
719 .cpuport = 5,
720 .ports = 6,
721 .vlans = 16,
722 .driver_handlers = cfg,
723 .port_handlers = port,
724 .vlan_handlers = vlan,
725 };
726 if (robo.devid != ROBO_DEVICE_ID_5325) {
727 driver.ports = 9;
728 driver.cpuport = 8;
729 }
730
731 return switch_register_driver(&driver);
732 }
733 }
734
735 static void __exit robo_exit(void)
736 {
737 switch_unregister_driver(DRIVER_NAME);
738 if (robo.dev)
739 dev_put(robo.dev);
740 if (robo.gpio_robo_reset >= 0)
741 gpio_free(robo.gpio_robo_reset);
742 if (robo.gpio_lanports_enable >= 0)
743 gpio_free(robo.gpio_lanports_enable);
744 kfree(robo.device);
745 }
746
747
748 MODULE_AUTHOR("Felix Fietkau <openwrt@nbd.name>");
749 MODULE_LICENSE("GPL");
750
751 module_init(robo_init);
752 module_exit(robo_exit);
OpenWrt Source Repository