target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/adm5120_intc.h

   1 /*
   2  *  ADM5120 interrupt controller definitions
   3  *
   4  *  This header file defines the hardware registers of the ADM5120 SoC
   5  *  built-in interrupt controller.
   6  *
   7  *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
   8  *
   9  *  This program is free software; you can redistribute it and/or modify it
  10  *  under the terms of the GNU General Public License version 2 as published
  11  *  by the Free Software Foundation.
  12  *
  13  */
  14
  15 #ifndef _MACH_ADM5120_INTC_H
  16 #define _MACH_ADM5120_INTC_H
  17
  18 /*
  19  * INTC register offsets
  20  */
  21 #define INTC_REG_IRQ_STATUS             0x00 /* Interrupt status after masking */
  22 #define INTC_REG_IRQ_RAW_STATUS         0x04 /* Interrupt status before masking */
  23 #define INTC_REG_IRQ_ENABLE             0x08 /* Used to enable the interrupt sources */
  24 #define INTC_REG_IRQ_ENABLE_CLEAR       0x0C /* Used to disable the interrupt sources */
  25 #define INTC_REG_IRQ_DISABLE            INTC_REG_IRQ_ENABLE_CLEAR
  26 #define INTC_REG_INT_MODE               0x14 /* The interrupt mode of the sources */
  27 #define INTC_REG_FIQ_STATUS             0x18 /* FIQ status */
  28 #define INTC_REG_IRQ_TEST_SOURCE        0x1C
  29 #define INTC_REG_IRQ_SOURCE_SELECT      0x20
  30 #define INTC_REG_INT_LEVEL              0x24
  31
  32 /*
  33  * INTC IRQ numbers
  34  */
  35 #define INTC_IRQ_TIMER  0       /* built in timer */
  36 #define INTC_IRQ_UART0  1       /* built-in UART0 */
  37 #define INTC_IRQ_UART1  2       /* built-in UART1 */
  38 #define INTC_IRQ_USBC   3       /* USB Host Controller */
  39 #define INTC_IRQ_GPIO2  4       /* GPIO line 2 */
  40 #define INTC_IRQ_GPIO4  5       /* GPIO line 4 */
  41 #define INTC_IRQ_PCI0   6       /* PCI slot 2 */
  42 #define INTC_IRQ_PCI1   7       /* PCI slot 3 */
  43 #define INTC_IRQ_PCI2   8       /* PCI slot 4 */
  44 #define INTC_IRQ_SWITCH 9       /* built-in ethernet switch */
  45 #define INTC_IRQ_LAST   INTC_IRQ_SWITCH
  46 #define INTC_IRQ_COUNT  10
  47
  48 /*
  49  * INTC register bits
  50  */
  51 #define INTC_INT_TIMER  (1 << INTC_IRQ_TIMER)
  52 #define INTC_INT_UART0  (1 << INTC_IRQ_UART0)
  53 #define INTC_INT_UART1  (1 << INTC_IRQ_UART1)
  54 #define INTC_INT_USBC   (1 << INTC_IRQ_USBC)
  55 #define INTC_INT_INTX0  (1 << INTC_IRQ_INTX0)
  56 #define INTC_INT_INTX1  (1 << INTC_IRQ_INTX1)
  57 #define INTC_INT_PCI0   (1 << INTC_IRQ_PCI0)
  58 #define INTC_INT_PCI1   (1 << INTC_IRQ_PCI1)
  59 #define INTC_INT_PCI2   (1 << INTC_IRQ_PCI2)
  60 #define INTC_INT_SWITCH (1 << INTC_IRQ_SWITCH)
  61 #define INTC_INT_ALL    ((1 << INTC_IRQ_COUNT) - 1)
  62
  63 #endif /* _MACH_ADM5120_INTC_H */