target/linux/ar71xx/base-files/lib/upgrade/openmesh.sh

   1 # The U-Boot loader of the OpenMesh devices requires image sizes and
   2 # checksums to be provided in the U-Boot environment.
   3 # The OpenMesh devices come with 2 main partitions - while one is active
   4 # sysupgrade will flash the other. The boot order is changed to boot the
   5 # newly flashed partition. If the new partition can't be booted due to
   6 # upgrade failures the previously used partition is loaded.
   7
   8 trim()
   9 {
  10         echo $1
  11 }
  12
  13 cfg_value_get()
  14 {
  15         local cfg=$1 cfg_opt
  16         local section=$2 our_section=0
  17         local param=$3 our_param=
  18
  19         for cfg_opt in $cfg
  20                 do
  21                         [ "$cfg_opt" = "[$section]" ] && our_section=1 && continue
  22                         [ "$our_section" = "1" ] || continue
  23
  24                         our_param=$(echo ${cfg_opt%%=*})
  25                         [ "$param" = "$our_param" ] && echo ${cfg_opt##*=} && break
  26                 done
  27 }
  28
  29 # make sure we got uboot-envtools and fw_env.config copied over to the ramfs
  30 # create /var/lock for the lock "fw_setenv.lock" of fw_setenv
  31 platform_add_ramfs_ubootenv()
  32 {
  33         [ -e /usr/sbin/fw_printenv ] && install_bin /usr/sbin/fw_printenv /usr/sbin/fw_setenv
  34         [ -e /etc/fw_env.config ] && install_file /etc/fw_env.config
  35         mkdir -p $RAM_ROOT/var/lock
  36 }
  37 append sysupgrade_pre_upgrade platform_add_ramfs_ubootenv
  38
  39 platform_check_image_target_openmesh()
  40 {
  41         img_board_target="$1"
  42
  43         case "$img_board_target" in
  44                 A60)
  45                         [ "$board" = "a40" ] && return 0
  46                         [ "$board" = "a60" ] && return 0
  47                         echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform"
  48                         return 1
  49                         ;;
  50                 OM2P)
  51                         [ "$board" = "om2p" ] && return 0
  52                         [ "$board" = "om2pv2" ] && return 0
  53                         [ "$board" = "om2pv4" ] && return 0
  54                         [ "$board" = "om2p-lc" ] && return 0
  55                         [ "$board" = "om2p-hs" ] && return 0
  56                         [ "$board" = "om2p-hsv2" ] && return 0
  57                         [ "$board" = "om2p-hsv3" ] && return 0
  58                         [ "$board" = "om2p-hsv4" ] && return 0
  59                         echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform"
  60                         return 1
  61                         ;;
  62                 OM5P)
  63                         [ "$board" = "om5p" ] && return 0
  64                         [ "$board" = "om5p-an" ] && return 0
  65                         echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform"
  66                         return 1
  67                         ;;
  68                 OM5PAC)
  69                         [ "$board" = "om5p-ac" ] && return 0
  70                         [ "$board" = "om5p-acv2" ] && return 0
  71                         echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform"
  72                         return 1
  73                         ;;
  74                 MR1750)
  75                         [ "$board" = "mr1750" ] && return 0
  76                         [ "$board" = "mr1750v2" ] && return 0
  77                         echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform"
  78                         return 1
  79                         ;;
  80                 MR600)
  81                         [ "$board" = "mr600" ] && return 0
  82                         [ "$board" = "mr600v2" ] && return 0
  83                         echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform"
  84                         return 1
  85                         ;;
  86                 MR900)
  87                         [ "$board" = "mr900" ] && return 0
  88                         [ "$board" = "mr900v2" ] && return 0
  89                         echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform"
  90                         return 1
  91                         ;;
  92                 *)
  93                         echo "Invalid board target ($img_board_target). Use the correct image for this platform"
  94                         return 1
  95                         ;;
  96         esac
  97 }
  98
  99 platform_check_image_openmesh()
 100 {
 101         local img_magic=$1
 102         local img_path=$2
 103         local fw_printenv=/usr/sbin/fw_printenv
 104         local img_board_target= img_num_files= i=0
 105         local cfg_name= kernel_name= rootfs_name=
 106
 107         case "$img_magic" in
 108                 # Combined Extended Image v1
 109                 43453031)
 110                         img_board_target=$(trim $(dd if="$img_path" bs=4 skip=1 count=8 2>/dev/null))
 111                         img_num_files=$(trim $(dd if="$img_path" bs=2 skip=18 count=1 2>/dev/null))
 112                         ;;
 113                 *)
 114                         echo "Invalid image ($img_magic). Use combined extended images on this platform"
 115                         return 1
 116                         ;;
 117         esac
 118
 119         platform_check_image_target_openmesh "$img_board_target" || return 1
 120
 121         [ $img_num_files -lt 3 ] && {
 122                 echo "Invalid number of embedded images ($img_num_files). Use the correct image for this platform"
 123                 return 1
 124         }
 125
 126         cfg_name=$(trim $(dd if="$img_path" bs=2 skip=19 count=16 2>/dev/null))
 127
 128         [ "$cfg_name" != "fwupgrade.cfg" ] && {
 129                 echo "Invalid embedded config file ($cfg_name). Use the correct image for this platform"
 130                 return 1
 131         }
 132
 133         kernel_name=$(trim $(dd if="$img_path" bs=2 skip=55 count=16 2>/dev/null))
 134
 135         [ "$kernel_name" != "kernel" ] && {
 136                 echo "Invalid embedded kernel file ($kernel_name). Use the correct image for this platform"
 137                 return 1
 138         }
 139
 140         rootfs_name=$(trim $(dd if="$img_path" bs=2 skip=91 count=16 2>/dev/null))
 141
 142         [ "$rootfs_name" != "rootfs" ] && {
 143                 echo "Invalid embedded kernel file ($rootfs_name). Use the correct image for this platform"
 144                 return 1
 145         }
 146
 147         [ ! -x "$fw_printenv" ] && {
 148                 echo "Please install uboot-envtools!"
 149                 return 1
 150         }
 151
 152         [ ! -r "/etc/fw_env.config" ] && {
 153                 echo "/etc/fw_env.config is missing"
 154                 return 1
 155         }
 156
 157         return 0
 158 }
 159
 160 platform_do_upgrade_openmesh()
 161 {
 162         local img_path=$1 img_board_target=
 163         local kernel_start_addr= kernel_start_addr1= kernel_start_addr2=
 164         local kernel_size= kernel_md5=
 165         local rootfs_size= rootfs_checksize= rootfs_md5=
 166         local kernel_bsize= total_size=
 167         local data_offset=$((64 * 1024)) block_size= offset=
 168         local uboot_env_upgrade="/tmp/fw_env_upgrade"
 169         local cfg_size= kernel_size= rootfs_size=
 170         local append=""
 171
 172         [ -f "$CONF_TAR" -a "$SAVE_CONFIG" -eq 1 ] && append="-j $CONF_TAR"
 173
 174         cfg_size=$(dd if="$img_path" bs=2 skip=35 count=4 2>/dev/null)
 175         kernel_size=$(dd if="$img_path" bs=2 skip=71 count=4 2>/dev/null)
 176         rootfs_size=$(dd if="$img_path" bs=2 skip=107 count=4 2>/dev/null)
 177
 178         img_board_target=$(trim $(dd if="$img_path" bs=4 skip=1 count=8 2>/dev/null))
 179         cfg_content=$(dd if="$img_path" bs=1 skip=$data_offset count=$(echo $((0x$cfg_size))) 2>/dev/null)
 180
 181         case $img_board_target in
 182                 OM2P)
 183                         block_size=$((256 * 1024))
 184                         total_size=7340032
 185                         kernel_start_addr1=0x9f1c0000
 186                         kernel_start_addr2=0x9f8c0000
 187                         ;;
 188                 OM5P|OM5PAC|MR600|MR900|MR1750|A60)
 189                         block_size=$((64 * 1024))
 190                         total_size=7995392
 191                         kernel_start_addr1=0x9f0b0000
 192                         kernel_start_addr2=0x9f850000
 193                         ;;
 194         esac
 195
 196         kernel_md5=$(cfg_value_get "$cfg_content" "vmlinux" "md5sum")
 197         rootfs_md5=$(cfg_value_get "$cfg_content" "rootfs" "md5sum")
 198         rootfs_checksize=$(cfg_value_get "$cfg_content" "rootfs" "checksize")
 199
 200         if [ "$((0x$kernel_size % $block_size))" = "0" ]
 201                 then
 202                         kernel_bsize=$(echo $((0x$kernel_size)))
 203                 else
 204                         kernel_bsize=$((0x$kernel_size + ($block_size - (0x$kernel_size % $block_size))))
 205         fi
 206
 207         mtd -q erase inactive
 208
 209         offset=$(echo $(($data_offset + 0x$cfg_size + 0x$kernel_size)))
 210         dd if="$img_path" bs=1 skip=$offset count=$(echo $((0x$rootfs_size))) 2>&- | mtd -n -p $kernel_bsize $append write - "inactive"
 211
 212         offset=$(echo $(($data_offset + 0x$cfg_size)))
 213         dd if="$img_path" bs=1 skip=$offset count=$(echo $((0x$kernel_size))) 2>&- | mtd -n write - "inactive"
 214
 215         rm $uboot_env_upgrade 2>&-
 216
 217         if [ "$(grep 'mtd3:.*inactive' /proc/mtd)" ]
 218                 then
 219                         printf "kernel_size_1 %u\n" $(($kernel_bsize / 1024)) >> $uboot_env_upgrade
 220                         printf "rootfs_size_1 %u\n" $((($total_size - $kernel_bsize) / 1024)) >> $uboot_env_upgrade
 221                         printf "bootseq 1,2\n" >> $uboot_env_upgrade
 222                         kernel_start_addr=$kernel_start_addr1
 223                 else
 224                         printf "kernel_size_2 %u\n" $(($kernel_bsize / 1024)) >> $uboot_env_upgrade
 225                         printf "rootfs_size_2 %u\n" $((($total_size - $kernel_bsize) / 1024)) >> $uboot_env_upgrade
 226                         printf "bootseq 2,1\n" >> $uboot_env_upgrade
 227                         kernel_start_addr=$kernel_start_addr2
 228         fi
 229
 230         printf "vmlinux_start_addr %s\n" $kernel_start_addr >> $uboot_env_upgrade
 231         printf "vmlinux_size 0x%s\n" $kernel_size >> $uboot_env_upgrade
 232         printf "vmlinux_checksum %s\n" $kernel_md5 >> $uboot_env_upgrade
 233         printf "rootfs_start_addr 0x%x\n" $(($kernel_start_addr + $kernel_bsize)) >> $uboot_env_upgrade
 234         printf "rootfs_size %s\n" $rootfs_checksize >> $uboot_env_upgrade
 235         printf "rootfs_checksum %s\n" $rootfs_md5 >> $uboot_env_upgrade
 236
 237         fw_setenv -s $uboot_env_upgrade || {
 238                 echo "failed to update U-Boot environment"
 239                 return 1
 240         }
 241 }