2 * Planex MZK-W300NH board support
4 * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
5 * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License version 2 as published
9 * by the Free Software Foundation.
12 #include <linux/platform_device.h>
13 #include <linux/mtd/mtd.h>
14 #include <linux/mtd/partitions.h>
15 #include <linux/spi/spi.h>
16 #include <linux/spi/flash.h>
17 #include <linux/input.h>
19 #include <asm/mips_machine.h>
21 #include <asm/mach-ar71xx/ar71xx.h>
25 #define MZK_W300NH_GPIO_LED_STATUS 1
26 #define MZK_W300NH_GPIO_LED_WPS 3
27 #define MZK_W300NH_GPIO_LED_WLAN 6
28 #define MZK_W300NH_GPIO_LED_AP 15
29 #define MZK_W300NH_GPIO_LED_ROUTER 16
31 #define MZK_W300NH_GPIO_BTN_APROUTER 5
32 #define MZK_W300NH_GPIO_BTN_WPS 12
33 #define MZK_W300NH_GPIO_BTN_RESET 21
35 #define MZK_W04NU_BUTTONS_POLL_INTERVAL 20
37 #ifdef CONFIG_MTD_PARTITIONS
38 static struct mtd_partition mzk_w300nh_partitions
[] = {
43 .mask_flags
= MTD_WRITEABLE
,
64 .mask_flags
= MTD_WRITEABLE
,
67 #endif /* CONFIG_MTD_PARTITIONS */
69 static struct flash_platform_data mzk_w300nh_flash_data
= {
70 #ifdef CONFIG_MTD_PARTITIONS
71 .parts
= mzk_w300nh_partitions
,
72 .nr_parts
= ARRAY_SIZE(mzk_w300nh_partitions
),
76 static struct spi_board_info mzk_w300nh_spi_info
[] = {
80 .max_speed_hz
= 25000000,
82 .platform_data
= &mzk_w300nh_flash_data
,
86 static struct gpio_led mzk_w300nh_leds_gpio
[] __initdata
= {
88 .name
= "mzk-w300nh:green:status",
89 .gpio
= MZK_W300NH_GPIO_LED_STATUS
,
92 .name
= "mzk-w300nh:blue:wps",
93 .gpio
= MZK_W300NH_GPIO_LED_WPS
,
96 .name
= "mzk-w300nh:green:wlan",
97 .gpio
= MZK_W300NH_GPIO_LED_WLAN
,
100 .name
= "mzk-w300nh:green:ap",
101 .gpio
= MZK_W300NH_GPIO_LED_AP
,
104 .name
= "mzk-w300nh:green:router",
105 .gpio
= MZK_W300NH_GPIO_LED_ROUTER
,
110 static struct gpio_button mzk_w300nh_gpio_buttons
[] __initdata
= {
116 .gpio
= MZK_W300NH_GPIO_BTN_RESET
,
123 .gpio
= MZK_W300NH_GPIO_BTN_WPS
,
130 .gpio
= MZK_W300NH_GPIO_BTN_APROUTER
,
135 static void __init
mzk_w300nh_setup(void)
137 u8
*mac
= (u8
*) KSEG1ADDR(0x1fff1000);
139 ar71xx_set_mac_base(mac
);
141 ar71xx_add_device_mdio(0x0);
143 ar71xx_eth0_data
.phy_if_mode
= PHY_INTERFACE_MODE_RMII
;
144 ar71xx_eth0_data
.phy_mask
= 0xf;
145 ar71xx_eth0_data
.speed
= SPEED_100
;
146 ar71xx_eth0_data
.duplex
= DUPLEX_FULL
;
147 ar71xx_eth0_data
.has_ar8216
= 1;
149 ar71xx_eth1_data
.phy_if_mode
= PHY_INTERFACE_MODE_RMII
;
150 ar71xx_eth1_data
.phy_mask
= 0x10;
152 ar71xx_add_device_eth(0);
153 ar71xx_add_device_eth(1);
155 ar71xx_add_device_spi(NULL
, mzk_w300nh_spi_info
,
156 ARRAY_SIZE(mzk_w300nh_spi_info
));
158 ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(mzk_w300nh_leds_gpio
),
159 mzk_w300nh_leds_gpio
);
161 ar71xx_add_device_gpio_buttons(-1, MZK_W04NU_BUTTONS_POLL_INTERVAL
,
162 ARRAY_SIZE(mzk_w300nh_gpio_buttons
),
163 mzk_w300nh_gpio_buttons
);
164 ar91xx_add_device_wmac();
167 MIPS_MACHINE(AR71XX_MACH_MZK_W300NH
, "Planex MZK-W300NH", mzk_w300nh_setup
);