423b918551bc2d8cdc16febbc332f8c414ff1d1d
[openwrt/openwrt.git] / target / linux / ar71xx / files / arch / mips / ath79 / mach-dir-825-c1.c
1 /*
2 * D-Link DIR-825 rev. C1 board support
3 *
4 * Copyright (C) 2013 Alexander Stadler
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License version 2 as published
8 * by the Free Software Foundation.
9 */
10
11 #include <linux/pci.h>
12 #include <linux/phy.h>
13 #include <linux/gpio.h>
14 #include <linux/platform_device.h>
15 #include <linux/ath9k_platform.h>
16 #include <linux/ar8216_platform.h>
17
18 #include <asm/mach-ath79/ar71xx_regs.h>
19
20 #include "common.h"
21 #include "dev-ap9x-pci.h"
22 #include "dev-eth.h"
23 #include "dev-gpio-buttons.h"
24 #include "dev-leds-gpio.h"
25 #include "dev-m25p80.h"
26 #include "dev-spi.h"
27 #include "dev-usb.h"
28 #include "dev-wmac.h"
29 #include "machtypes.h"
30
31 #define DIR825C1_GPIO_LED_BLUE_USB 11
32 #define DIR825C1_GPIO_LED_ORANGE_POWER 14
33 #define DIR825C1_GPIO_LED_BLUE_POWER 22
34 #define DIR825C1_GPIO_LED_BLUE_WPS 15
35 #define DIR825C1_GPIO_LED_ORANGE_PLANET 19
36 #define DIR825C1_GPIO_LED_BLUE_PLANET 18
37
38 #define DIR825C1_GPIO_BTN_RESET 17
39 #define DIR825C1_GPIO_BTN_WPS 16
40
41 #define DIR825C1_KEYS_POLL_INTERVAL 20 /* msecs */
42 #define DIR825C1_KEYS_DEBOUNCE_INTERVAL (3 * DIR825C1_KEYS_POLL_INTERVAL)
43
44 #define DIR825C1_MAC0_OFFSET 0x4
45 #define DIR825C1_MAC1_OFFSET 0x18
46 #define DIR825C1_WMAC_CALDATA_OFFSET 0x1000
47 #define DIR825C1_PCIE_CALDATA_OFFSET 0x5000
48
49 static struct gpio_led dir825c1_leds_gpio[] __initdata = {
50 {
51 .name = "d-link:blue:usb",
52 .gpio = DIR825C1_GPIO_LED_BLUE_USB,
53 .active_low = 1,
54 },
55 {
56 .name = "d-link:orange:power",
57 .gpio = DIR825C1_GPIO_LED_ORANGE_POWER,
58 .active_low = 1,
59 },
60 {
61 .name = "d-link:blue:power",
62 .gpio = DIR825C1_GPIO_LED_BLUE_POWER,
63 .active_low = 1,
64 },
65 {
66 .name = "d-link:blue:wps",
67 .gpio = DIR825C1_GPIO_LED_BLUE_WPS,
68 .active_low = 1,
69 },
70 {
71 .name = "d-link:orange:planet",
72 .gpio = DIR825C1_GPIO_LED_ORANGE_PLANET,
73 .active_low = 1,
74 },
75 {
76 .name = "d-link:blue:planet",
77 .gpio = DIR825C1_GPIO_LED_BLUE_PLANET,
78 .active_low = 1,
79 },
80 };
81
82 static struct gpio_led dir835a1_leds_gpio[] __initdata = {
83 {
84 .name = "d-link:orange:power",
85 .gpio = DIR825C1_GPIO_LED_ORANGE_POWER,
86 .active_low = 1,
87 },
88 {
89 .name = "d-link:green:power",
90 .gpio = DIR825C1_GPIO_LED_BLUE_POWER,
91 .active_low = 1,
92 },
93 {
94 .name = "d-link:blue:wps",
95 .gpio = DIR825C1_GPIO_LED_BLUE_WPS,
96 .active_low = 1,
97 },
98 {
99 .name = "d-link:orange:planet",
100 .gpio = DIR825C1_GPIO_LED_ORANGE_PLANET,
101 .active_low = 1,
102 },
103 {
104 .name = "d-link:green:planet",
105 .gpio = DIR825C1_GPIO_LED_BLUE_PLANET,
106 .active_low = 1,
107 },
108 };
109
110 static struct gpio_keys_button dir825c1_gpio_keys[] __initdata = {
111 {
112 .desc = "reset",
113 .type = EV_KEY,
114 .code = KEY_RESTART,
115 .debounce_interval = DIR825C1_KEYS_DEBOUNCE_INTERVAL,
116 .gpio = DIR825C1_GPIO_BTN_RESET,
117 .active_low = 1,
118 },
119 {
120 .desc = "wps",
121 .type = EV_KEY,
122 .code = KEY_WPS_BUTTON,
123 .debounce_interval = DIR825C1_KEYS_DEBOUNCE_INTERVAL,
124 .gpio = DIR825C1_GPIO_BTN_WPS,
125 .active_low = 1,
126 },
127 };
128
129 static struct ar8327_pad_cfg dir825c1_ar8327_pad0_cfg = {
130 .mode = AR8327_PAD_MAC_RGMII,
131 .txclk_delay_en = true,
132 .rxclk_delay_en = true,
133 .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
134 .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
135 };
136
137 static struct ar8327_led_cfg dir825c1_ar8327_led_cfg = {
138 .led_ctrl0 = 0xc737c737,
139 .led_ctrl1 = 0x00000000,
140 .led_ctrl2 = 0x00000000,
141 .led_ctrl3 = 0x0030c300,
142 .open_drain = false,
143 };
144
145 static struct ar8327_platform_data dir825c1_ar8327_data = {
146 .pad0_cfg = &dir825c1_ar8327_pad0_cfg,
147 .port0_cfg = {
148 .force_link = 1,
149 .speed = AR8327_PORT_SPEED_1000,
150 .duplex = 1,
151 .txpause = 1,
152 .rxpause = 1,
153 },
154 .led_cfg = &dir825c1_ar8327_led_cfg,
155 };
156
157 static struct mdio_board_info dir825c1_mdio0_info[] = {
158 {
159 .bus_id = "ag71xx-mdio.0",
160 .phy_addr = 0,
161 .platform_data = &dir825c1_ar8327_data,
162 },
163 };
164
165 static void dir825c1_read_ascii_mac(u8 *dest, u8 *src)
166 {
167 int ret;
168
169 ret = sscanf(src, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
170 &dest[0], &dest[1], &dest[2],
171 &dest[3], &dest[4], &dest[5]);
172
173 if (ret != ETH_ALEN)
174 memset(dest, 0, ETH_ALEN);
175 }
176
177 static void __init dir825c1_generic_setup(void)
178 {
179 u8 *mac = (u8 *) KSEG1ADDR(0x1ffe0000);
180 u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
181 u8 mac0[ETH_ALEN], mac1[ETH_ALEN];
182 u8 wmac0[ETH_ALEN], wmac1[ETH_ALEN];
183
184 dir825c1_read_ascii_mac(mac0, mac + DIR825C1_MAC0_OFFSET);
185 dir825c1_read_ascii_mac(mac1, mac + DIR825C1_MAC1_OFFSET);
186
187 ath79_register_m25p80(NULL);
188
189 ath79_register_gpio_keys_polled(-1, DIR825C1_KEYS_POLL_INTERVAL,
190 ARRAY_SIZE(dir825c1_gpio_keys),
191 dir825c1_gpio_keys);
192
193 ath79_init_mac(wmac0, mac0, 0);
194 ath79_register_wmac(art + DIR825C1_WMAC_CALDATA_OFFSET, wmac0);
195
196 ath79_init_mac(wmac1, mac1, 1);
197 ap91_pci_init(art + DIR825C1_PCIE_CALDATA_OFFSET, wmac1);
198
199 ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
200
201 mdiobus_register_board_info(dir825c1_mdio0_info,
202 ARRAY_SIZE(dir825c1_mdio0_info));
203
204 ath79_register_mdio(0, 0x0);
205
206 ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 0);
207
208 /* GMAC0 is connected to an AR8327N switch */
209 ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
210 ath79_eth0_data.phy_mask = BIT(0);
211 ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
212 ath79_eth0_pll_data.pll_1000 = 0x06000000;
213 ath79_register_eth(0);
214
215 ath79_register_usb();
216 }
217
218 static void __init dir825c1_setup(void)
219 {
220 ath79_gpio_output_select(DIR825C1_GPIO_LED_BLUE_USB,
221 AR934X_GPIO_OUT_GPIO);
222
223 ath79_register_leds_gpio(-1, ARRAY_SIZE(dir825c1_leds_gpio),
224 dir825c1_leds_gpio);
225
226 ap9x_pci_setup_wmac_led_pin(0, 13);
227 ap9x_pci_setup_wmac_led_pin(1, 32);
228
229 dir825c1_generic_setup();
230 }
231
232 static void __init dir835a1_setup(void)
233 {
234 dir825c1_ar8327_data.led_cfg = NULL;
235
236 ath79_register_leds_gpio(-1, ARRAY_SIZE(dir835a1_leds_gpio),
237 dir835a1_leds_gpio);
238
239 dir825c1_generic_setup();
240 }
241
242 MIPS_MACHINE(ATH79_MACH_DIR_825_C1, "DIR-825-C1",
243 "D-Link DIR-825 rev. C1",
244 dir825c1_setup);
245
246 MIPS_MACHINE(ATH79_MACH_DIR_835_A1, "DIR-835-A1",
247 "D-Link DIR-835 rev. A1",
248 dir835a1_setup);