target/linux/ar71xx/patches-3.10/626-MIPS-ath79-add-MyNet-600-support.patch

   1 --- a/arch/mips/ath79/Kconfig
   2 +++ b/arch/mips/ath79/Kconfig
   3 @@ -762,6 +762,16 @@ config ATH79_MACH_UBNT_XM
   4           Say 'Y' here if you want your kernel to support the
   5           Ubiquiti Networks XM (rev 1.0) board.
   6
   7 +config ATH79_MACH_MYNET_N600
   8 +       bool "WD My Net N600 board support"
   9 +       select SOC_AR934X
  10 +       select ATH79_DEV_ETH
  11 +       select ATH79_DEV_GPIO_BUTTONS
  12 +       select ATH79_DEV_LEDS_GPIO
  13 +       select ATH79_DEV_M25P80
  14 +       select ATH79_DEV_WMAC
  15 +       select ATH79_NVRAM
  16 +
  17  config ATH79_MACH_ZCN_1523H
  18         bool "Zcomax ZCN-1523H support"
  19         select SOC_AR724X
  20 --- a/arch/mips/ath79/machtypes.h
  21 +++ b/arch/mips/ath79/machtypes.h
  22 @@ -53,6 +53,7 @@ enum ath79_mach_type {
  23         ATH79_MACH_HORNET_UB,           /* ALFA Networks Hornet-UB */
  24         ATH79_MACH_MR600V2,             /* OpenMesh MR600v2 */
  25         ATH79_MACH_MR600,               /* OpenMesh MR600 */
  26 +       ATH79_MACH_MYNET_N600,          /* WD My Net N600 */
  27         ATH79_MACH_MZK_W04NU,           /* Planex MZK-W04NU */
  28         ATH79_MACH_MZK_W300NH,          /* Planex MZK-W300NH */
  29         ATH79_MACH_NBG460N,             /* Zyxel NBG460N/550N/550NH */
  30 --- a/arch/mips/ath79/Makefile
  31 +++ b/arch/mips/ath79/Makefile
  32 @@ -64,6 +64,7 @@ obj-$(CONFIG_ATH79_MACH_JA76PF)               += mach
  33  obj-$(CONFIG_ATH79_MACH_JWAP003)       += mach-jwap003.o
  34  obj-$(CONFIG_ATH79_MACH_HORNET_UB)     += mach-hornet-ub.o
  35  obj-$(CONFIG_ATH79_MACH_MR600)         += mach-mr600.o
  36 +obj-$(CONFIG_ATH79_MACH_MYNET_N600)    += mach-mynet-n600.o
  37  obj-$(CONFIG_ATH79_MACH_MZK_W04NU)     += mach-mzk-w04nu.o
  38  obj-$(CONFIG_ATH79_MACH_MZK_W300NH)    += mach-mzk-w300nh.o
  39  obj-$(CONFIG_ATH79_MACH_NBG460N)       += mach-nbg460n.o