target/linux/ath79/dts/ar1022_sitecom_wlr-7100.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9344.dtsi"
   8
   9 / {
  10         model = "Sitecom WLR-7100 v1 002 (X7 AC1200)";
  11         compatible = "sitecom,wlr-7100", "qca,ar9344";
  12
  13         aliases {
  14                 led-boot = &power;
  15                 led-failsafe = &power;
  16                 led-running = &power;
  17                 led-upgrade = &power;
  18         };
  19
  20         keys {
  21                 compatible = "gpio-keys";
  22
  23                 wlan2g {
  24                         label = "2.4GHz";
  25                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  26                         linux,code = <KEY_RESTART>;
  27                 };
  28
  29                 wlan5g {
  30                         label = "5GHz";
  31                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  32                         linux,code = <KEY_WPS_BUTTON>;
  33                 };
  34         };
  35
  36         leds {
  37                 compatible = "gpio-leds";
  38
  39                 ops {
  40                         label = "wlr-7100:white:ops";
  41                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  42                 };
  43
  44                 power: power {
  45                         label = "wlr-7100:amber:power";
  46                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  47                         default-state = "on";
  48                 };
  49
  50                 wlan2g {
  51                         label = "wlr-7100:blue:wlan2g";
  52                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  53                         linux,default-trigger = "phy1tpt";
  54                 };
  55         };
  56 };
  57
  58 &eth0 {
  59         status = "okay";
  60
  61         pll-data = <0x06000000 0x00000101 0x00001616>;
  62
  63         phy-mode = "rgmii";
  64         phy-handle = <&phy0>;
  65
  66         gmac-config {
  67                 device = <&gmac>;
  68                 rgmii-gmac0 = <1>;
  69         };
  70 };
  71
  72 &mdio0 {
  73         status = "okay";
  74
  75         phy0: ethernet-phy@0 {
  76                 reg = <0>;
  77                 phy-mode = "rgmii";
  78
  79                 qca,ar8327-initvals = <
  80                         0x04 0x87a00000 /* PORT0 PAD Mode */
  81                         0x0c 0x01000000 /* PORT6 PAD Mode */
  82                         0x10 0x80000000 /* PWS_REG_VALUE */
  83                         0x7c 0x000000fe /* PORT0_STATUS */
  84                         0x94 0x000000fe /* PORT6_STATUS */
  85                 >;
  86         };
  87 };
  88
  89 &pcie {
  90         status = "okay";
  91
  92         wifi@0,0 {
  93                 compatible = "qcom,ath10k";
  94                 reg = <0x0000 0 0 0 0>;
  95         };
  96 };
  97
  98 &ref {
  99         clock-frequency = <25000000>;
 100 };
 101
 102 &spi {
 103         num-cs = <1>;
 104         status = "okay";
 105
 106         flash@0 {
 107                 compatible = "jedec,spi-nor";
 108                 reg = <0>;
 109                 spi-max-frequency = <25000000>;
 110
 111                 partitions {
 112                         compatible = "fixed-partitions";
 113                         #address-cells = <1>;
 114                         #size-cells = <1>;
 115
 116                         partition@0 {
 117                                 label = "u-boot";
 118                                 reg = <0x000000 0x030000>;
 119                                 read-only;
 120                         };
 121
 122                         uenv: partition@30000 {
 123                                 label = "u-boot-env";
 124                                 reg = <0x030000 0x010000>;
 125                                 read-only;
 126                         };
 127
 128                         partition@40000 {
 129                                 compatible = "denx,uimage";
 130                                 label = "firmware";
 131                                 reg = <0x040000 0x750000>;
 132                         };
 133
 134                         partition@790000 {
 135                                 label = "backup";
 136                                 reg = <0x790000 0x010000>;
 137                                 read-only;
 138                         };
 139
 140                         partition@7a0000 {
 141                                 label = "storage";
 142                                 reg = <0x7a0000 0x050000>;
 143                                 read-only;
 144                         };
 145
 146                         art: partition@7f0000 {
 147                                 label = "art";
 148                                 reg = <0x7f0000 0x010000>;
 149                                 read-only;
 150                         };
 151                 };
 152         };
 153 };
 154
 155 &uart {
 156         status = "okay";
 157 };
 158
 159 &usb {
 160         status = "okay";
 161 };
 162
 163 &usb_phy {
 164         status = "okay";
 165 };
 166
 167 &wmac {
 168         status = "okay";
 169
 170         qca,no-eeprom;
 171 };