target/linux/ath79/dts/ar7161_adtran_bsap1880.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar7100.dtsi"
   8
   9 / {
  10         chosen {
  11                 bootargs = "console=ttyS0,115200n8";
  12         };
  13
  14         aliases {
  15                 led-boot = &led_status_green;
  16                 led-failsafe = &led_status_yellow;
  17                 led-running = &led_status_green;
  18                 led-upgrade = &led_status_yellow;
  19         };
  20
  21         leds {
  22                 compatible = "gpio-leds";
  23
  24                 wlan5g {
  25                         label = "bluesocket:green:wifi5g";
  26                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  27                         linux,default-trigger = "phy1tpt";
  28                 };
  29
  30                 wlan2g {
  31                         label = "bluesocket:green:wifi2g";
  32                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  33                         linux,default-trigger = "phy0tpt";
  34                 };
  35
  36                 led_status_green: status_green {
  37                         label = "bluesocket:green:status";
  38                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  39                 };
  40
  41                 led_status_yellow: status_yellow {
  42                         label = "bluesocket:yellow:status";
  43                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  44                 };
  45         };
  46
  47         keys {
  48                 compatible = "gpio-keys";
  49
  50                 reset {
  51                         label = "reset";
  52                         linux,code = <KEY_RESTART>;
  53                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  54                         debounce-interval = <60>;
  55                 };
  56         };
  57 };
  58
  59 &mdio0 {
  60         status = "okay";
  61
  62         phy-mask = <0x1>;
  63
  64         phy0: ethernet-phy@0 {
  65                 reg = <0>;
  66         };
  67 };
  68
  69 &eth0 {
  70         status = "okay";
  71
  72         phy-mode = "rgmii-id";
  73         phy-handle = <&phy0>;
  74 };
  75
  76 &pcie0 {
  77         status = "okay";
  78 };
  79
  80 &spi {
  81         status = "okay";
  82
  83         num-cs = <1>;
  84
  85         flash@0 {
  86                 compatible = "jedec,spi-nor";
  87                 reg = <0>;
  88                 spi-max-frequency = <25000000>;
  89
  90                 partitions {
  91                         #address-cells = <1>;
  92                         #size-cells = <1>;
  93                         compatible = "ecoscentric,redboot-fis-partitions";
  94                 };
  95         };
  96 };
  97
  98 &uart {
  99         status = "okay";
 100 };