target/linux/ath79/dts/ar7161_buffalo_wzr-hp-ag300h.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar7100.dtsi"
   8
   9 / {
  10         compatible = "buffalo,wzr-hp-ag300h", "qca,ar7161";
  11         model = "Buffalo WZR-HP-AG300H/WZR-600DHP";
  12
  13         aliases {
  14                 led-boot = &led_diag;
  15                 led-failsafe = &led_diag;
  16                 led-upgrade = &led_diag;
  17         };
  18
  19         chosen {
  20                 bootargs = "console=ttyS0,115200";
  21         };
  22
  23         extosc: ref {
  24                 compatible = "fixed-clock";
  25                 #clock-cells = <0>;
  26                 clock-output-names = "ref";
  27                 clock-frequency = <40000000>;
  28         };
  29
  30         leds {
  31                 compatible = "gpio-leds";
  32
  33                 led_diag: diag {
  34                         label = "buffalo:red:diag";
  35                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  36                 };
  37         };
  38
  39         ath9k-leds {
  40                 compatible = "gpio-leds";
  41
  42                 band2g_a {
  43                         label = "buffalo:amber:band2g";
  44                         gpios = <&ath9k0 1 GPIO_ACTIVE_LOW>;
  45                 };
  46
  47                 usb {
  48                         label = "buffalo:green:usb";
  49                         gpios = <&ath9k0 3 GPIO_ACTIVE_LOW>;
  50                         trigger-sources = <&usb_ochi_port>, <&usb_echi_port>;
  51                         linux,default-trigger = "usbport";
  52                 };
  53
  54                 band2g_g {
  55                         label = "buffalo:green:band2g";
  56                         gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
  57                         linux,default-trigger = "phy0tpt";
  58                 };
  59
  60                 band5g_g {
  61                         label = "buffalo:green:band5g";
  62                         gpios = <&ath9k1 1 GPIO_ACTIVE_LOW>;
  63                         linux,default-trigger = "phy1tpt";
  64                 };
  65
  66                 router {
  67                         label = "buffalo:green:router";
  68                         gpios = <&ath9k1 3 GPIO_ACTIVE_LOW>;
  69                 };
  70
  71                 movie_engine {
  72                         label = "buffalo:blue:movie_engine";
  73                         gpios = <&ath9k1 4 GPIO_ACTIVE_LOW>;
  74                 };
  75
  76                 band5g_a {
  77                         label = "buffalo:amber:band5g";
  78                         gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
  79                 };
  80         };
  81
  82         keys {
  83                 compatible = "gpio-keys";
  84
  85                 reset {
  86                         linux,code = <KEY_RESTART>;
  87                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  88                         debounce-interval = <60>;
  89                 };
  90
  91                 usb {
  92                         linux,code = <BTN_2>;
  93                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  94                         debounce-interval = <60>;
  95                 };
  96
  97                 aoss {
  98                         linux,code = <KEY_WPS_BUTTON>;
  99                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
 100                         debounce-interval = <60>;
 101                 };
 102
 103                 router_auto {
 104                         linux,code = <BTN_6>;
 105                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
 106                         debounce-interval = <60>;
 107                 };
 108
 109                 router_off {
 110                         linux,code = <BTN_5>;
 111                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
 112                         debounce-interval = <60>;
 113                 };
 114
 115                 movie_engine {
 116                         linux,code = <BTN_7>;
 117                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
 118                         debounce-interval = <60>;
 119                 };
 120         };
 121
 122         gpio-export {
 123                 compatible = "gpio-export";
 124
 125                 gpio_usb_power {
 126                         gpio-export,name = "buffalo:power:usb";
 127                         gpio-export,output = <1>;
 128                         gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
 129                 };
 130         };
 131
 132         flash {
 133                 compatible = "mtd-concat";
 134
 135                 devices = <&flash0 &flash1>;
 136
 137                 partitions {
 138                         compatible = "fixed-partitions";
 139                         #address-cells = <1>;
 140                         #size-cells = <1>;
 141                         partition@0 {
 142                                 label = "u-boot";
 143                                 reg = <0x0000000 0x0040000>;
 144                                 read-only;
 145                         };
 146
 147                         partition@40000 {
 148                                 label = "u-boot-env";
 149                                 reg = <0x0040000 0x0010000>;
 150                                 read-only;
 151                         };
 152
 153                         art: partition@50000 {
 154                                 label = "art";
 155                                 reg = <0x0050000 0x0010000>;
 156                                 read-only;
 157                         };
 158
 159                         partition@60000 {
 160                                 compatible = "denx,uimage";
 161                                 label = "firmware";
 162                                 reg = <0x0060000 0x1f90000>;
 163                         };
 164
 165                         partition@1ff0000 {
 166                                 label = "user_property";
 167                                 reg = <0x1ff0000 0x0010000>;
 168                                 read-only;
 169                         };
 170                 };
 171         };
 172 };
 173
 174 &usb_phy {
 175         status = "okay";
 176 };
 177
 178 &usb1 {
 179         #address-cells = <1>;
 180         #size-cells = <0>;
 181         status = "okay";
 182
 183         usb_ochi_port: port@1 {
 184                 reg = <1>;
 185                 #trigger-source-cells = <0>;
 186         };
 187 };
 188
 189 &usb2 {
 190         #address-cells = <1>;
 191         #size-cells = <0>;
 192         status = "okay";
 193
 194         usb_echi_port: port@1 {
 195                 reg = <1>;
 196                 #trigger-source-cells = <0>;
 197         };
 198 };
 199
 200 &pcie0 {
 201         status = "okay";
 202
 203         ath9k0: wifi@0,11 {
 204                 compatible = "pci168c,0029";
 205                 reg = <0x8800 0 0 0 0>;
 206                 qca,no-eeprom;
 207                 #gpio-cells = <2>;
 208                 gpio-controller;
 209         };
 210
 211         ath9k1: wifi@0,12 {
 212                 compatible = "pci168c,0029";
 213                 reg = <0x9000 0 0 0 0>;
 214                 qca,no-eeprom;
 215                 #gpio-cells = <2>;
 216                 gpio-controller;
 217         };
 218 };
 219
 220 &uart {
 221         status = "okay";
 222 };
 223
 224 &pll {
 225         clocks = <&extosc>;
 226 };
 227
 228 &spi {
 229         status = "okay";
 230
 231         num-cs = <2>;
 232         cs-gpios = <0>, <0>;
 233
 234         flash0: flash@0 {
 235                 compatible = "jedec,spi-nor";
 236                 reg = <0>;
 237                 spi-max-frequency = <104000000>;
 238                 m25p,fast-read;
 239         };
 240
 241         flash1: flash@1 {
 242                 compatible = "jedec,spi-nor";
 243                 reg = <1>;
 244                 spi-max-frequency = <104000000>;
 245                 m25p,fast-read;
 246         };
 247 };
 248
 249 &mdio0 {
 250         status = "okay";
 251
 252         phy4: ethernet-phy@4 {
 253                 reg = <4>;
 254                 phy-mode = "rgmii";
 255         };
 256 };
 257
 258 &eth0 {
 259         status = "okay";
 260
 261         mtd-mac-address = <&art 0x120c>;
 262
 263         fixed-link {
 264                 speed = <1000>;
 265                 full-duplex;
 266         };
 267 };
 268
 269 &eth1 {
 270         status = "okay";
 271
 272         mtd-mac-address = <&art 0x520c>;
 273         mtd-mac-address-increment = <1>;
 274
 275         phy-handle = <&phy4>;
 276 };