target/linux/ath79/dts/ar7161_dlink_dir-825-b1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar7100.dtsi"
   8
   9 / {
  10         compatible = "dlink,dir-825-b1", "qca,ar7161";
  11         model = "D-Link DIR825B1";
  12
  13         aliases {
  14                 led-boot = &orange_power;
  15                 led-failsafe = &orange_power;
  16                 led-running = &blue_power;
  17                 led-upgrade = &orange_power;
  18         };
  19
  20         chosen {
  21                 bootargs = "console=ttyS0,115200";
  22         };
  23
  24         extosc: ref {
  25                 compatible = "fixed-clock";
  26                 #clock-cells = <0>;
  27                 clock-output-names = "ref";
  28                 clock-frequency = <40000000>;
  29         };
  30
  31         leds {
  32                 compatible = "gpio-leds";
  33                 blue_usb {
  34                         label = "d-link:blue:usb";
  35                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  36                         trigger-sources = <&usb_ochi_port>, <&usb_echi_port>;
  37                         linux,default-trigger = "usbport";
  38                 };
  39
  40                 orange_power: orange_power {
  41                         label = "d-link:orange:power";
  42                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  43                         default-state = "on";
  44                 };
  45
  46                 blue_power: blue_power {
  47                         label = "d-link:blue:power";
  48                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  49                 };
  50
  51                 blue_wps {
  52                         label = "d-link:blue:wps";
  53                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  54                 };
  55
  56                 orange_planet {
  57                         label = "d-link:orange:planet";
  58                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  59                 };
  60
  61                 blue_planet {
  62                         label = "d-link:blue:planet";
  63                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  64                 };
  65         };
  66
  67         ath9k-leds {
  68                 compatible = "gpio-leds";
  69
  70                 wlan2g {
  71                         label = "d-link:blue:wlan2g";
  72                         gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
  73                         linux,default-trigger = "phy0tpt";
  74                 };
  75
  76                 wlan5g {
  77                         label = "d-link:blue:wlan5g";
  78                         gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
  79                         linux,default-trigger = "phy1tpt";
  80                 };
  81         };
  82
  83         keys {
  84                 compatible = "gpio-keys";
  85
  86                 reset {
  87                         label = "reset";
  88                         linux,code = <KEY_RESTART>;
  89                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  90                 };
  91
  92                 wps {
  93                         label = "wps";
  94                         linux,code = <KEY_WPS_BUTTON>;
  95                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  96                 };
  97         };
  98
  99         rtl8366s {
 100                 compatible = "realtek,rtl8366s";
 101                 gpio-sda = <&gpio 5 GPIO_ACTIVE_HIGH>;
 102                 gpio-sck = <&gpio 7 GPIO_ACTIVE_HIGH>;
 103                 realtek,initvals = <0x06 0x0108>;
 104
 105                 mdio-bus {
 106                         #address-cells = <1>;
 107                         #size-cells = <0>;
 108                         status = "okay";
 109
 110                         phy-mask = <0x10>;
 111
 112                         phy4: ethernet-phy@4 {
 113                                 reg = <4>;
 114                                 phy-mode = "rgmii";
 115                         };
 116                 };
 117         };
 118 };
 119
 120 &usb1 {
 121         #address-cells = <1>;
 122         #size-cells = <0>;
 123         status = "okay";
 124
 125         usb_ochi_port: port@1 {
 126                 reg = <1>;
 127                 #trigger-source-cells = <0>;
 128         };
 129 };
 130
 131 &usb2 {
 132         #address-cells = <1>;
 133         #size-cells = <0>;
 134         status = "okay";
 135
 136         usb_echi_port: port@1 {
 137                 reg = <1>;
 138                 #trigger-source-cells = <0>;
 139         };
 140 };
 141
 142 &usb_phy {
 143         status = "okay";
 144 };
 145
 146 &pcie0 {
 147         status = "okay";
 148
 149         ath9k0: wifi@0,11 {
 150                 compatible = "pci168c,0029";
 151                 reg = <0x8800 0 0 0 0>;
 152                 qca,no-eeprom;
 153                 #gpio-cells = <2>;
 154                 gpio-controller;
 155         };
 156
 157         ath9k1: wifi@0,12 {
 158                 compatible = "pci168c,0029";
 159                 reg = <0x9000 0 0 0 0>;
 160                 qca,no-eeprom;
 161                 #gpio-cells = <2>;
 162                 gpio-controller;
 163         };
 164 };
 165
 166 &uart {
 167         status = "okay";
 168 };
 169
 170 &pll {
 171         clocks = <&extosc>;
 172 };
 173
 174 &spi {
 175         status = "okay";
 176         num-cs = <1>;
 177
 178         flash@0 {
 179                 compatible = "jedec,spi-nor";
 180                 reg = <0>;
 181                 spi-max-frequency = <25000000>;
 182
 183                 partitions {
 184                         compatible = "fixed-partitions";
 185                         #address-cells = <1>;
 186                         #size-cells = <1>;
 187
 188                         partition@0 {
 189                                 label = "u-boot";
 190                                 reg = <0x000000 0x040000>;
 191                                 read-only;
 192                         };
 193
 194                         partition@40000 {
 195                                 label = "config";
 196                                 reg = <0x040000 0x010000>;
 197                                 read-only;
 198                         };
 199
 200                         partition@50000 {
 201                                 compatible = "denx,uimage";
 202                                 label = "firmware";
 203                                 reg = <0x050000 0x610000>;
 204                         };
 205
 206                         caldata: partition@60000 {
 207                                 label = "caldata";
 208                                 reg = <0x660000 0x010000>;
 209                                 read-only;
 210                         };
 211
 212                         partition@670000 {
 213                                 label = "unknown";
 214                                 reg = <0x670000 0x190000>;
 215                                 read-only;
 216                         };
 217                 };
 218         };
 219 };
 220
 221 &eth0 {
 222         status = "okay";
 223         pll-data = <0x11110000 0x00001099 0x00991099>;
 224
 225         fixed-link {
 226                 speed = <1000>;
 227                 full-duplex;
 228         };
 229 };
 230
 231 &eth1 {
 232         status = "okay";
 233         pll-data = <0x11110000 0x00001099 0x00991099>;
 234
 235         phy-handle = <&phy4>;
 236 };