target/linux/ath79/dts/ar7161_netgear_wndr3800.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar7100.dtsi"
   8
   9 / {
  10         compatible = "netgear,wndr3800", "qca,ar7161";
  11         model = "Netgear WNDR3800";
  12
  13         aliases {
  14                 led-status = &power_green;
  15         };
  16
  17         chosen {
  18                 bootargs = "console=ttyS0,115200";
  19         };
  20
  21         extosc: ref {
  22                 compatible = "fixed-clock";
  23                 #clock-cells = <0>;
  24                 clock-output-names = "ref";
  25                 clock-frequency = <40000000>;
  26         };
  27
  28         reset-leds {
  29                 compatible = "reset-leds";
  30
  31                 usb_led {
  32                         label = "netgear:green:usb";
  33                         resets = <&rst 12>;
  34                         trigger-sources = <&usb_ochi_port>, <&usb_echi_port>;
  35                         linux,default-trigger = "usbport";
  36                 };
  37         };
  38
  39         gpio-leds {
  40                 compatible = "gpio-leds";
  41
  42                 wps {
  43                         label = "netgear:orange:wps";
  44                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  45                         default-state = "off";
  46                 };
  47
  48                 power_green: power_green {
  49                         label = "netgear:green:power";
  50                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  51                         default-state = "off";
  52                 };
  53
  54                 power_orange {
  55                         label = "netgear:orange:power";
  56                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  57                         default-state = "off";
  58                 };
  59
  60                 wps_green {
  61                         label = "netgear:green:wps";
  62                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  63                         default-state = "off";
  64                 };
  65
  66                 wan_green {
  67                         label = "netgear:green:wan";
  68                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  69                         default-state = "off";
  70                 };
  71         };
  72
  73         gpio-keys-polled {
  74                 compatible = "gpio-keys-polled";
  75                 poll-interval = <100>;
  76
  77                 wps {
  78                         label = "wps";
  79                         linux,code = <KEY_WPS_BUTTON>;
  80                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  81                 };
  82
  83                 reset {
  84                         label = "reset";
  85                         linux,code = <KEY_RESTART>;
  86                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  87                 };
  88
  89                 rfkill {
  90                         label = "rfkill";
  91                         linux,code = <KEY_RFKILL>;
  92                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  93                 };
  94         };
  95
  96         rtl8366s {
  97                 compatible = "realtek,rtl8366s";
  98                 gpio-sda = <&gpio 5 GPIO_ACTIVE_HIGH>;
  99                 gpio-sck = <&gpio 7 GPIO_ACTIVE_HIGH>;
 100
 101                 mdio-bus {
 102                         #address-cells = <1>;
 103                         #size-cells = <0>;
 104                         status = "okay";
 105
 106                         phy-mask = <0x10>;
 107
 108                         phy4: ethernet-phy@4 {
 109                                 reg = <4>;
 110                                 phy-mode = "rgmii";
 111                         };
 112                 };
 113         };
 114 };
 115
 116 &usb_phy {
 117         status = "okay";
 118 };
 119
 120 &usb1 {
 121         #address-cells = <1>;
 122         #size-cells = <0>;
 123         status = "okay";
 124
 125         usb_ochi_port: port@1 {
 126                 reg = <1>;
 127                 #trigger-source-cells = <0>;
 128         };
 129 };
 130
 131 &usb2 {
 132         #address-cells = <1>;
 133         #size-cells = <0>;
 134         status = "okay";
 135
 136         usb_echi_port: port@1 {
 137                 reg = <1>;
 138                 #trigger-source-cells = <0>;
 139         };
 140 };
 141
 142 &pcie0 {
 143         status = "okay";
 144 };
 145
 146 &uart {
 147         status = "okay";
 148 };
 149
 150 &spi {
 151         status = "okay";
 152         num-cs = <1>;
 153
 154         flash@0 {
 155                 compatible = "jedec,spi-nor";
 156                 reg = <0>;
 157                 spi-max-frequency = <25000000>;
 158
 159                 partitions {
 160                         compatible = "fixed-partitions";
 161                         #address-cells = <1>;
 162                         #size-cells = <1>;
 163
 164                         partition@0 {
 165                                 label = "u-boot";
 166                                 reg = <0x000000 0x050000>;
 167                                 read-only;
 168                         };
 169
 170                         partition@1 {
 171                                 label = "u-boot-env";
 172                                 reg = <0x050000 0x020000>;
 173                                 read-only;
 174                         };
 175
 176                         partition@2 {
 177                                 label = "firmware";
 178                                 reg = <0x070000 0xf80000>;
 179                         };
 180
 181                         art: partition@3 {
 182                                 label = "art";
 183                                 reg = <0xff0000 0x010000>;
 184                                 read-only;
 185                         };
 186                 };
 187         };
 188 };
 189
 190 &eth0 {
 191         status = "okay";
 192
 193         pll-data = <0x11110000 0x00001099 0x00991099>;
 194
 195         mtd-mac-address = <&art 0x00>;
 196
 197         fixed-link {
 198                 speed = <1000>;
 199                 full-duplex;
 200         };
 201 };
 202
 203 &eth1 {
 204         status = "okay";
 205
 206         pll-data = <0x11110000 0x00001099 0x00991099>;
 207
 208         mtd-mac-address = <&art 0x06>;
 209
 210         phy-handle = <&phy4>;
 211 };