target/linux/ath79/dts/ar7241_ubnt_unifi.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar7241.dtsi"
   8
   9 / {
  10         compatible = "ubnt,unifi", "qca,ar7241";
  11         model = "Ubiquiti UniFi AP";
  12
  13         aliases {
  14                 led-status = &dome_green;
  15         };
  16
  17         extosc: ref {
  18                 compatible = "fixed-clock";
  19                 #clock-cells = <0>;
  20                 clock-frequency = <40000000>;
  21         };
  22
  23         keys {
  24                 compatible = "gpio-keys-polled";
  25                 poll-interval = <20>;
  26                 reset {
  27                         linux,code = <KEY_RESTART>;
  28                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  29                         debounce-interval = <60>;
  30                 };
  31         };
  32
  33         leds {
  34                 compatible = "gpio-leds";
  35                 dome_green: dome-green {
  36                         label = "ubnt:green:dome";
  37                         gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
  38                 };
  39
  40                 dome-orange {
  41                         label = "ubnt:orange:dome";
  42                         gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
  43                 };
  44         };
  45 };
  46
  47 &uart {
  48         status = "okay";
  49 };
  50
  51 &pll {
  52         clocks = <&extosc>;
  53 };
  54
  55 &spi {
  56         status = "okay";
  57         num-cs = <1>;
  58
  59         flash@0 {
  60                 compatible = "jedec,spi-nor";
  61                 reg = <0>;
  62                 spi-max-frequency = <25000000>;
  63
  64                 partitions {
  65                         compatible = "fixed-partitions";
  66                         #address-cells = <1>;
  67                         #size-cells = <1>;
  68
  69                         partition@0 {
  70                                 label = "u-boot";
  71                                 reg = <0x000000 0x040000>;
  72                                 read-only;
  73                         };
  74
  75                         partition@1 {
  76                                 label = "u-boot-env";
  77                                 reg = <0x040000 0x010000>;
  78                         };
  79
  80                         partition@2 {
  81                                 label = "firmware";
  82                                 reg = <0x050000 0x750000>;
  83                         };
  84
  85                         partition@3 {
  86                                 label = "board_config";
  87                                 reg = <0x7a0000 0x010000>;
  88                                 read-only;
  89                         };
  90
  91                         partition@4 {
  92                                 label = "cfg";
  93                                 reg = <0x7b0000 0x040000>;
  94                                 read-only;
  95                         };
  96
  97                         art: partition@5 {
  98                                 label = "art";
  99                                 reg = <0x7f0000 0x010000>;
 100                                 read-only;
 101                         };
 102                 };
 103         };
 104 };
 105
 106 &pcie {
 107         status = "okay";
 108
 109         wifi@0,0 {
 110                 reg = <0x0000 0 0 0 0>;
 111                 qca,no-eeprom;
 112         };
 113 };
 114
 115 &eth0 {
 116         status = "okay";
 117
 118         mtd-mac-address = <&art 0x0>;
 119 };
 120
 121 &eth1 {
 122         status = "okay";
 123
 124         compatible = "syscon", "simple-mfd";
 125 };