target/linux/ath79/dts/ar9132_tplink_tl-wr941-v2.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9132.dtsi"
   8
   9 / {
  10         compatible = "tplink,tl-wr941-v2", "qca,ar9132";
  11         model = "TP-Link TL-WR941N/ND v2/v3";
  12
  13         aliases {
  14                 led-boot = &led_system;
  15                 led-failsafe = &led_system;
  16                 led-running = &led_system;
  17                 led-upgrade = &led_system;
  18                 label-mac-device = &eth0;
  19         };
  20
  21         keys {
  22                 compatible = "gpio-keys";
  23
  24                 button0 {
  25                         label = "reset";
  26                         linux,code = <KEY_RESTART>;
  27                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  28                         debounce-interval = <60>;
  29                 };
  30
  31                 button1 {
  32                         label = "qss";
  33                         linux,code = <KEY_WPS_BUTTON>;
  34                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  35                         debounce-interval = <60>;
  36                 };
  37         };
  38
  39         leds {
  40                 compatible = "gpio-leds";
  41
  42                 led_system: system {
  43                         label = "tp-link:green:system";
  44                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  45                 };
  46
  47                 qss_r {
  48                         label = "tp-link:red:qss";
  49                         gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
  50                 };
  51
  52                 qss_g {
  53                         label = "tp-link:green:qss";
  54                         gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
  55                 };
  56
  57                 wlan {
  58                         label = "tp-link:green:wlan";
  59                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  60                         linux,default-trigger = "phy0tpt";
  61                 };
  62         };
  63
  64         dsa {
  65                 compatible = "marvell,dsa";
  66                 #address-cells = <1>;
  67                 #size-cells = <0>;
  68
  69                 dsa,mii-bus = <&mdio0>;
  70                 dsa,ethernet = <&eth0>;
  71
  72                 switch@0 {
  73                         #address-cells = <1>;
  74                         #size-cells = <0>;
  75                         reg = <0>;
  76
  77                         port@0 {
  78                                 reg = <0>;
  79                                 label = "wan";
  80                         };
  81
  82                         port@1 {
  83                                 reg = <1>;
  84                                 label = "lan1";
  85                         };
  86
  87                         port@2 {
  88                                 reg = <2>;
  89                                 label = "lan2";
  90                         };
  91
  92                         port@3 {
  93                                 reg = <3>;
  94                                 label = "lan3";
  95                         };
  96
  97                         port@4 {
  98                                 reg = <4>;
  99                                 label = "lan4";
 100                         };
 101
 102                         port@5 {
 103                                 reg = <5>;
 104                                 label = "cpu";
 105                         };
 106                 };
 107         };
 108 };
 109
 110 &uart {
 111         status = "okay";
 112 };
 113
 114 &spi {
 115         status = "okay";
 116
 117         flash@0 {
 118                 compatible = "jedec,spi-nor";
 119                 reg = <0>;
 120                 spi-max-frequency = <25000000>;
 121
 122                 partitions {
 123                         compatible = "fixed-partitions";
 124                         #address-cells = <1>;
 125                         #size-cells = <1>;
 126
 127                         uboot: partition@0 {
 128                                 label = "u-boot";
 129                                 reg = <0x000000 0x20000>;
 130                                 read-only;
 131                         };
 132
 133                         partition@20000 {
 134                                 compatible = "tplink,firmware";
 135                                 label = "firmware";
 136                                 reg = <0x020000 0x3d0000>;
 137                         };
 138
 139                         art: partition@3f0000 {
 140                                 label = "art";
 141                                 reg = <0x3f0000 0x10000>;
 142                                 read-only;
 143                         };
 144                 };
 145         };
 146 };
 147
 148 &mdio0 {
 149         status = "okay";
 150 };
 151
 152 &eth0 {
 153         status = "okay";
 154
 155         phy-mode = "rmii";
 156         mtd-mac-address = <&uboot 0x1fc00>;
 157
 158         fixed-link {
 159                 speed = <100>;
 160                 full-duplex;
 161         };
 162 };
 163
 164 &wmac {
 165         status = "okay";
 166         mtd-cal-data = <&art 0x1000>;
 167         mtd-mac-address = <&uboot 0x1fc00>;
 168 };