target/linux/ath79/dts/ar9331_embeddedwireless_dorin.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9331.dtsi"
   8
   9 / {
  10         model = "Embedded Wireless Dorin";
  11         compatible = "embeddedwireless,dorin", "qca,ar9331";
  12
  13         aliases {
  14                 led-boot = &status;
  15                 led-failsafe = &status;
  16                 led-running = &status;
  17                 led-upgrade = &status;
  18                 serial0 = &uart;
  19         };
  20
  21         leds {
  22                 compatible = "gpio-leds";
  23
  24                 status: status {
  25                         label = "dorin:green:status";
  26                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
  27                         default-state = "off";
  28                 };
  29         };
  30
  31         keys {
  32                 compatible = "gpio-keys-polled";
  33                 poll-interval = <100>;
  34
  35                 wps {
  36                         label = "wps";
  37                         linux,code = <KEY_WPS_BUTTON>;
  38                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  39                 };
  40
  41                 reset {
  42                         label = "reset";
  43                         linux,code = <KEY_RESTART>;
  44                         gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
  45                 };
  46         };
  47 };
  48
  49 &uart {
  50         status = "okay";
  51 };
  52
  53 &gpio {
  54         status = "okay";
  55 };
  56
  57 &usb {
  58         dr_mode = "host";
  59         status = "okay";
  60 };
  61
  62 &usb_phy {
  63         status = "okay";
  64 };
  65
  66 &spi {
  67         num-chipselects = <1>;
  68         status = "okay";
  69
  70         flash@0 {
  71                 compatible = "jedec,spi-nor";
  72                 spi-max-frequency = <104000000>;
  73                 reg = <0>;
  74
  75                 partitions {
  76                         compatible = "fixed-partitions";
  77                         #address-cells = <1>;
  78                         #size-cells = <1>;
  79
  80                         partition@0 {
  81                                 label = "u-boot";
  82                                 reg = <0x000000 0x040000>;
  83                                 read-only;
  84                         };
  85
  86                         partition@1 {
  87                                 label = "u-boot-env";
  88                                 reg = <0x040000 0x010000>;
  89                         };
  90
  91                         partition@2 {
  92                                 compatible = "denx,uimage";
  93                                 label = "firmware";
  94                                 reg = <0x050000 0xfa0000>;
  95                         };
  96
  97                         art: partition@3 {
  98                                 label = "ART";
  99                                 reg = <0xff0000 0x010000>;
 100                                 read-only;
 101                         };
 102                 };
 103         };
 104 };
 105
 106 &eth1 {
 107         status = "okay";
 108
 109         mtd-mac-address = <&art 0x1002>;
 110         mtd-mac-address-increment-byte = <3>;
 111         mtd-mac-address-increment = <0x40>;
 112 };
 113
 114 &mdio1 {
 115         status = "okay";
 116 };
 117
 118 &wmac {
 119         status = "okay";
 120         mtd-cal-data = <&art 0x1000>;
 121         mtd-mac-address = <&art 0x1002>;
 122 };