target/linux/ath79/dts/ar9331_tplink_tl-wr741nd-v4.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9331.dtsi"
   8
   9 / {
  10         compatible = "tplink,tl-wr741n-v4", "qca,ar9331";
  11         model = "TP-Link TL-WR741N/ND v4";
  12
  13         aliases {
  14                 serial0 = &uart;
  15                 led-boot = &led_system;
  16                 led-failsafe = &led_system;
  17                 led-running = &led_system;
  18                 led-upgrade = &led_system;
  19                 label-mac-device = &wmac;
  20         };
  21
  22         keys {
  23                 compatible = "gpio-keys";
  24
  25                 reset {
  26                         label = "reset";
  27                         linux,code = <KEY_RESTART>;
  28                         gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
  29                         debounce-interval = <60>;
  30                 };
  31
  32                 wps {
  33                         label = "wps";
  34                         linux,code = <KEY_WPS_BUTTON>;
  35                         gpios = <&gpio 26 GPIO_ACTIVE_HIGH>;
  36                         debounce-interval = <60>;
  37                 };
  38         };
  39
  40         leds {
  41                 compatible = "gpio-leds";
  42
  43                 pinctrl-names = "default";
  44                 pinctrl-0 = <&switch_led_disable_pins>;
  45
  46                 lan1 {
  47                         label = "tp-link:green:lan1";
  48                         gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
  49                 };
  50
  51                 lan2 {
  52                         label = "tp-link:green:lan2";
  53                         gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
  54                 };
  55
  56                 lan3 {
  57                         label = "tp-link:green:lan3";
  58                         gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
  59                 };
  60
  61                 lan4 {
  62                         label = "tp-link:green:lan4";
  63                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  64                 };
  65
  66                 qss {
  67                         label = "tp-link:green:qss";
  68                         gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
  69                 };
  70
  71                 led_system: system {
  72                         label = "tp-link:green:system";
  73                         gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
  74                 };
  75
  76                 wan {
  77                         label = "tp-link:green:wan";
  78                         gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
  79                 };
  80
  81                 wlan {
  82                         label = "tp-link:green:wlan";
  83                         gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
  84                         linux,default-trigger = "phy0tpt";
  85                 };
  86         };
  87 };
  88
  89 &spi {
  90         status = "okay";
  91
  92         num-cs = <1>;
  93
  94         flash@0 {
  95                 compatible = "jedec,spi-nor";
  96                 reg = <0>;
  97                 spi-max-frequency = <25000000>;
  98
  99                 partitions {
 100                         compatible = "fixed-partitions";
 101                         #address-cells = <1>;
 102                         #size-cells = <1>;
 103
 104                         uboot: partition@0 {
 105                                 reg = <0x0 0x20000>;
 106                                 label = "u-boot";
 107                                 read-only;
 108                         };
 109
 110                         firmware: partition@20000 {
 111                                 compatible = "tplink,firmware";
 112                                 reg = <0x20000 0x3d0000>;
 113                                 label = "firmware";
 114                         };
 115
 116                         art: partition@3f0000 {
 117                                 reg = <0x3f0000 0x10000>;
 118                                 label = "art";
 119                                 read-only;
 120                         };
 121                 };
 122         };
 123 };
 124
 125 &eth0 {
 126         status = "okay";
 127
 128         mtd-mac-address = <&uboot 0x1fc00>;
 129         mtd-mac-address-increment = <1>;
 130
 131         gmac-config {
 132                 device = <&gmac>;
 133
 134                 switch-phy-addr-swap = <1>;
 135                 switch-phy-swap = <1>;
 136         };
 137 };
 138
 139 &eth1 {
 140         status = "okay";
 141
 142         mtd-mac-address = <&uboot 0x1fc00>;
 143         mtd-mac-address-increment = <(-1)>;
 144 };
 145
 146 &gpio {
 147         status = "okay";
 148 };
 149
 150 &uart {
 151         status = "okay";
 152 };
 153
 154 &wmac {
 155         status = "okay";
 156
 157         mtd-cal-data = <&art 0x1000>;
 158         mtd-mac-address = <&uboot 0x1fc00>;
 159 };