target/linux/ath79/dts/ar9331_tplink_tl-wr741nd-v4.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "ar9331.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "tplink,tl-wr741n-v4", "qca,ar9331";
  10         model = "TP-Link TL-WR741N/ND v4";
  11
  12         aliases {
  13                 serial0 = &uart;
  14                 led-boot = &led_system;
  15                 led-failsafe = &led_system;
  16                 led-running = &led_system;
  17                 led-upgrade = &led_system;
  18                 label-mac-device = &wmac;
  19         };
  20
  21         keys {
  22                 compatible = "gpio-keys";
  23
  24                 reset {
  25                         label = "reset";
  26                         linux,code = <KEY_RESTART>;
  27                         gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
  28                         debounce-interval = <60>;
  29                 };
  30
  31                 wps {
  32                         label = "wps";
  33                         linux,code = <KEY_WPS_BUTTON>;
  34                         gpios = <&gpio 26 GPIO_ACTIVE_HIGH>;
  35                         debounce-interval = <60>;
  36                 };
  37         };
  38
  39         leds {
  40                 compatible = "gpio-leds";
  41
  42                 pinctrl-names = "default";
  43                 pinctrl-0 = <&switch_led_disable_pins>;
  44
  45                 lan1 {
  46                         label = "green:lan1";
  47                         gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
  48                 };
  49
  50                 lan2 {
  51                         label = "green:lan2";
  52                         gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
  53                 };
  54
  55                 lan3 {
  56                         label = "green:lan3";
  57                         gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
  58                 };
  59
  60                 lan4 {
  61                         label = "green:lan4";
  62                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  63                 };
  64
  65                 qss {
  66                         label = "green:qss";
  67                         gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
  68                 };
  69
  70                 led_system: system {
  71                         label = "green:system";
  72                         gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
  73                 };
  74
  75                 wan {
  76                         label = "green:wan";
  77                         gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
  78                 };
  79
  80                 wlan {
  81                         label = "green:wlan";
  82                         gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
  83                         linux,default-trigger = "phy0tpt";
  84                 };
  85         };
  86 };
  87
  88 &spi {
  89         status = "okay";
  90
  91         flash@0 {
  92                 compatible = "jedec,spi-nor";
  93                 reg = <0>;
  94                 spi-max-frequency = <25000000>;
  95
  96                 partitions {
  97                         compatible = "fixed-partitions";
  98                         #address-cells = <1>;
  99                         #size-cells = <1>;
 100
 101                         uboot: partition@0 {
 102                                 reg = <0x0 0x20000>;
 103                                 label = "u-boot";
 104                                 read-only;
 105                         };
 106
 107                         firmware: partition@20000 {
 108                                 compatible = "tplink,firmware";
 109                                 reg = <0x20000 0x3d0000>;
 110                                 label = "firmware";
 111                         };
 112
 113                         art: partition@3f0000 {
 114                                 reg = <0x3f0000 0x10000>;
 115                                 label = "art";
 116                                 read-only;
 117                         };
 118                 };
 119         };
 120 };
 121
 122 &eth0 {
 123         status = "okay";
 124
 125         mtd-mac-address = <&uboot 0x1fc00>;
 126         mtd-mac-address-increment = <1>;
 127
 128         gmac-config {
 129                 device = <&gmac>;
 130
 131                 switch-phy-addr-swap = <1>;
 132                 switch-phy-swap = <1>;
 133         };
 134 };
 135
 136 &eth1 {
 137         status = "okay";
 138
 139         mtd-mac-address = <&uboot 0x1fc00>;
 140         mtd-mac-address-increment = <(-1)>;
 141 };
 142
 143 &uart {
 144         status = "okay";
 145 };
 146
 147 &wmac {
 148         status = "okay";
 149
 150         mtd-cal-data = <&art 0x1000>;
 151         mtd-mac-address = <&uboot 0x1fc00>;
 152 };