target/linux/ath79/dts/ar9342_ubnt_powerbeam-5ac-gen2.dts

   1 // SPDX-License-Identifier: GPL-2.0-only
   2
   3 #include "ar9342_ubnt_wa.dtsi"
   4
   5 / {
   6         compatible = "ubnt,powerbeam-5ac-gen2", "ubnt,wa", "qca,ar9342";
   7         model = "Ubiquiti PowerBeam 5AC Gen2";
   8
   9         aliases {
  10                 led-boot = &led_rssi3;
  11                 led-failsafe = &led_rssi3;
  12                 led-upgrade = &led_rssi3;
  13         };
  14
  15         leds {
  16                 compatible = "gpio-leds";
  17
  18                 rssi0 {
  19                         label = "blue:rssi0";
  20                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  21                 };
  22
  23                 rssi1 {
  24                         label = "blue:rssi1";
  25                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  26                 };
  27
  28                 rssi2 {
  29                         label = "blue:rssi2";
  30                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  31                 };
  32
  33                 led_rssi3: rssi3 {
  34                         label = "blue:rssi3";
  35                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  36                 };
  37         };
  38 };
  39
  40 &mdio0 {
  41         status = "okay";
  42
  43         phy-mask = <4>;
  44         phy4: ethernet-phy@4 {
  45                 reg = <4>;
  46         };
  47 };
  48
  49 &eth0 {
  50         status = "okay";
  51
  52         /* default for ar934x, except for 1000M and 10M */
  53         pll-data = <0x02000000 0x00000101 0x00001313>;
  54
  55         mtd-mac-address = <&art 0x0>;
  56
  57         phy-mode = "rgmii-id";
  58         phy-handle = <&phy4>;
  59
  60         gmac-config {
  61                 device = <&gmac>;
  62                 rxd-delay = <3>;
  63                 rxdv-delay = <3>;
  64         };
  65 };