target/linux/ath79/dts/ar9344_comfast_cf-e120a-v3.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9344.dtsi"
   8
   9 / {
  10         compatible = "comfast,cf-e120a-v3", "qca,ar9344";
  11         model = "COMFAST CF-E120A v3";
  12
  13         aliases {
  14                 serial0 = &uart;
  15                 led-boot = &wan;
  16                 led-failsafe = &wan;
  17                 led-upgrade = &wan;
  18         };
  19
  20         leds {
  21                 compatible = "gpio-leds";
  22
  23                 pinctrl-names = "default";
  24                 pinctrl-0 = <&led_rssimediumhigh_pin>;
  25
  26                 wan: wan {
  27                         label = "cf-e120a-v3:green:wan";
  28                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  29                 };
  30
  31                 lan {
  32                         label = "cf-e120a-v3:green:lan";
  33                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  34                 };
  35
  36                 wlan {
  37                         label = "cf-e120a-v3:green:wlan";
  38                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  39                         linux,default-trigger = "phy0tpt";
  40                 };
  41
  42                 rssilow {
  43                         label = "cf-e120a-v3:red:rssilow";
  44                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  45                 };
  46
  47                 rssimediumlow {
  48                         label = "cf-e120a-v3:red:rssimediumlow";
  49                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  50                 };
  51
  52                 rssimediumhigh {
  53                         label = "cf-e120a-v3:green:rssimediumhigh";
  54                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  55                 };
  56
  57                 rssihigh {
  58                         label = "cf-e120a-v3:green:rssihigh";
  59                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  60                 };
  61         };
  62
  63         keys {
  64                 compatible = "gpio-keys-polled";
  65                 poll-interval = <20>;
  66
  67                 reset {
  68                         label = "reset";
  69                         linux,code = <KEY_RESTART>;
  70                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  71                         debounce-interval = <60>;
  72                 };
  73         };
  74 };
  75
  76 &pinmux {
  77                 led_rssimediumhigh_pin: pinmux_rssimediumhigh_pin {
  78                         pinctrl-single,bits = <0x10 0x0 0xff>;
  79                 };
  80 };
  81
  82 &spi {
  83         status = "okay";
  84         num-cs = <1>;
  85
  86         flash@0 {
  87                 compatible = "jedec,spi-nor";
  88                 reg = <0>;
  89                 spi-max-frequency = <25000000>;
  90
  91                 partitions {
  92                         compatible = "fixed-partitions";
  93                         #address-cells = <1>;
  94                         #size-cells = <1>;
  95
  96                         uboot:  partition@0 {
  97                                 label = "u-boot";
  98                                 reg = <0x000000 0x010000>;
  99                                 read-only;
 100                         };
 101
 102                         art: partition@10000 {
 103                                 label = "art";
 104                                 reg = <0x010000 0x010000>;
 105                                 read-only;
 106                         };
 107
 108                         firmware: partition@20000 {
 109                                 compatible = "denx,uimage";
 110                                 label = "firmware";
 111                                 reg = <0x020000 0x7d0000>;
 112                         };
 113
 114                         nvram: partition@7f0000 {
 115                                 label = "nvram";
 116                                 reg = <0x7f0000 0x010000>;
 117                                 read-only;
 118                         };
 119                 };
 120         };
 121 };
 122
 123 &uart {
 124         status = "okay";
 125 };
 126
 127 &eth0 {
 128         status = "okay";
 129         phy-handle = <&swphy0>;
 130         mtd-mac-address = <&art 0x0>;
 131
 132         gmac-config {
 133                 device = <&gmac>;
 134                 switch-phy-swap = <1>;
 135         };
 136 };
 137
 138 &eth1 {
 139         status = "okay";
 140         mtd-mac-address = <&art 0x6>;
 141 };
 142
 143 &wmac {
 144         status = "okay";
 145         mtd-cal-data = <&art 0x1000>;
 146 };