target/linux/ath79/dts/ar9344_netgear_wndr4300.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9344.dtsi"
   8
   9 / {
  10         compatible = "netgear,wndr4300", "qca,ar9344";
  11         model = "Netgear WNDR4300";
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,115200n8";
  15         };
  16
  17         aliases {
  18                 led-boot = &led_power_amber;
  19                 led-failsafe = &led_power_amber;
  20                 led-running = &led_power_green;
  21                 led-upgrade = &led_power_amber;
  22                 label-mac-device = &eth0;
  23         };
  24
  25         keys {
  26                 compatible = "gpio-keys";
  27
  28                 wps {
  29                         label = "wps";
  30                         linux,code = <KEY_WPS_BUTTON>;
  31                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  32                 };
  33
  34                 reset {
  35                         label = "reset";
  36                         linux,code = <KEY_RESTART>;
  37                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
  38                 };
  39
  40                 rfkill {
  41                         label = "rfkill";
  42                         linux,code = <KEY_RFKILL>;
  43                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  44                 };
  45         };
  46
  47         leds {
  48                 compatible = "gpio-leds";
  49
  50                 pinctrl-names = "default";
  51                 pinctrl-0 = <&enable_gpio_11>;
  52
  53                 led_power_green: power_green {
  54                         label = "netgear:green:power";
  55                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  56                 };
  57
  58                 led_power_amber: power_amber {
  59                         label = "netgear:amber:power";
  60                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  61                         default-state = "keep";
  62                 };
  63
  64                 wan_green {
  65                         label = "netgear:green:wan";
  66                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  67                 };
  68
  69                 wan_amber {
  70                         label = "netgear:amber:wan";
  71                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  72                 };
  73
  74                 wlan2g_green {
  75                         label = "netgear:green:wlan2g";
  76                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  77                         linux,default-trigger = "phy0tpt";
  78                 };
  79
  80                 wlan5g_blue {
  81                         label = "netgear:blue:wlan5g";
  82                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  83                         linux,default-trigger = "phy1tpt";
  84                 };
  85
  86                 wps_green {
  87                         label = "netgear:green:wps";
  88                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  89                 };
  90
  91                 wps_amber {
  92                         label = "netgear:amber:wps";
  93                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  94                 };
  95
  96                 usb_green {
  97                         label = "netgear:green:usb";
  98                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  99                         trigger-sources = <&hub_port>;
 100                         linux,default-trigger = "usbport";
 101                 };
 102         };
 103 };
 104
 105 &pinmux {
 106         enable_gpio_11: pinmux_enable_gpio_11 {
 107                 pinctrl-single,bits = <0x8 0x0 0xff000000>;
 108         };
 109 };
 110
 111 &nand {
 112         status = "okay";
 113
 114         partitions {
 115                 compatible = "fixed-partitions";
 116                 #address-cells = <1>;
 117                 #size-cells = <1>;
 118
 119                 partition@0 {
 120                         label = "u-boot";
 121                         reg = <0x0 0x40000>;
 122                         read-only;
 123                 };
 124
 125                 partition@40000 {
 126                         label = "u-boot-env";
 127                         reg = <0x40000 0x40000>;
 128                 };
 129
 130                 art: partition@80000 {
 131                         label = "caldata";
 132                         reg = <0x80000 0x40000>;
 133                         read-only;
 134                 };
 135
 136                 partition@c0000 {
 137                         label = "pot";
 138                         reg = <0xc0000 0x80000>;
 139                 };
 140
 141                 partition@140000 {
 142                         label = "language";
 143                         reg = <0x140000 0x200000>;
 144                 };
 145
 146                 partition@340000 {
 147                         label = "config";
 148                         reg = <0x340000 0x80000>;
 149                 };
 150
 151                 partition@3c0000 {
 152                         label = "traffic_meter";
 153                         reg = <0x3c0000 0x300000>;
 154                 };
 155
 156                 kernel@6c0000 {
 157                         label = "kernel";
 158                         reg = <0x6c0000 0x200000>;
 159                 };
 160
 161                 ubi@8c0000 {
 162                         label = "ubi";
 163                         reg = <0x8c0000 0x1700000>;
 164                 };
 165
 166                 partition@6c0000 {
 167                         label = "firmware";
 168                         reg = <0x6c0000 0x1900000>;
 169                         compatible = "netgear,uimage";
 170                 };
 171
 172                 partition@1fc0000 {
 173                         label = "caldata_backup";
 174                         reg = <0x1fc0000 0x40000>;
 175                         read-only;
 176                 };
 177
 178                 partition@2000000 {
 179                         label = "reserved";
 180                         reg = <0x2000000 0x6000000>;
 181                         read-only;
 182                 };
 183         };
 184 };
 185
 186 &ref {
 187         clock-frequency = <40000000>;
 188 };
 189
 190 &builtin_switch {
 191         resets = <&rst 8>, <&rst 12>;
 192         reset-names = "switch", "switch-analog";
 193 };
 194
 195 &mdio0 {
 196         status = "okay";
 197
 198         phy-mask = <0>;
 199
 200         phy0: ethernet-phy@0 {
 201                 reg = <0>;
 202                 phy-mode = "rgmii";
 203                 qca,mib-poll-interval = <500>;
 204
 205                 qca,ar8327-initvals = <
 206                         0x04 0x07600000
 207                         0x0c 0x01000000
 208                         0x10 0xc1000000
 209                         0x50 0xcc35cc35
 210                         0x54 0xcb37cb37
 211                         0x58 0x00000000
 212                         0x5c 0x00f3cf00
 213                         0x7c 0x0000007e
 214                         0x94 0x0000007e
 215                         >;
 216         };
 217 };
 218
 219 &eth0 {
 220         status = "okay";
 221
 222         /* default for ar934x, except for 1000M */
 223         pll-data = <0x06000000 0x00000101 0x00001616>;
 224
 225         mtd-mac-address = <&art 0x0>;
 226
 227         phy-mode = "rgmii";
 228         phy-handle = <&phy0>;
 229 };
 230
 231 &gpio {
 232         status = "okay";
 233
 234         lna0 {
 235                 gpio-hog;
 236                 line-name = "netgear:ext:lna0";
 237                 gpios = <18 GPIO_ACTIVE_HIGH>;
 238                 output-high;
 239         };
 240
 241         lna1 {
 242                 gpio-hog;
 243                 line-name = "netgear:ext:lna1";
 244                 gpios = <19 GPIO_ACTIVE_HIGH>;
 245                 output-high;
 246         };
 247 };
 248
 249 &wmac {
 250         status = "okay";
 251
 252         mtd-mac-address = <&art 0x0>;
 253         qca,no-eeprom;
 254 };
 255
 256 &pcie {
 257         status = "okay";
 258
 259         ath9k: wifi@0,0 {
 260                 compatible = "pci168c,0033";
 261                 reg = <0x0000 0 0 0 0>;
 262                 mtd-mac-address = <&art 0xc>;
 263                 qca,no-eeprom;
 264                 #gpio-cells = <2>;
 265                 gpio-controller;
 266
 267                 usb_power {
 268                         gpio-hog;
 269                         line-name = "netgear:power:usb";
 270                         gpios = <0 GPIO_ACTIVE_HIGH>;
 271                         output-high;
 272                 };
 273         };
 274 };
 275
 276 &usb_phy {
 277         status = "okay";
 278 };
 279
 280 &usb {
 281         status = "okay";
 282         #address-cells = <1>;
 283         #size-cells = <0>;
 284
 285         hub_port: port@1 {
 286                 reg = <1>;
 287                 #trigger-source-cells = <0>;
 288         };
 289 };
 290
 291 &uart {
 292         status = "okay";
 293 };